Develop Bugs

stuck at samsung galaxy s3 logo, rom not mounting,

stuck at boot logo
enter into recovery but internal memory not mounting shows only 0mb storage not evn wipe,restore,backup anything wd dt not possible
odin show me dis when m try to install new md5 file.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T999UVDMD5_T999TMBDMD5_T999UVDMD5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
plzzzzzzzzz help pllzzzz
thankz in advance

What recovery are you using? Try updating it. Factory resetting almost always solves boot hangups. For Odin, try flashing a different firmware. If you ever flashed 4.3 firmware, you can ONLY flash the same or newer from now on.

DocHoliday77 said:
What recovery are you using? Try updating it. Factory resetting almost always solves boot hangups. For Odin, try flashing a different firmware. If you ever flashed 4.3 firmware, you can ONLY flash the same or newer from now on.
Click to expand...
Click to collapse
SIr i have the same Problem but a little bit different .
i can recover my Phone without Odin problem but when the phone start up the is hangup with SAMSUNG logo and nothing appear then suddenly the phone is restarting without any action .. !!!!
please what should i do to fix my phone !?

Wallid92 said:
SIr i have the same Problem but a little bit different .
i can recover my Phone without Odin problem but when the phone start up the is hangup with SAMSUNG logo and nothing appear then suddenly the phone is restarting without any action .. !!!!
please what should i do to fix my phone !?
Click to expand...
Click to collapse
What steps have you taken to try to fix it?

[Q] Stuck in boot loop, nothing I try works. Is my phone a lost cause?

Model: SGH-T999V (Wind Mobile)
Firmware Rom: Cyanogenmod 10.1.3 (IIRC, might have been 10.1.2)
So, last night I plugged my phone in to my computer to charge. I walked away to do some other things, and when I came back a few minutes later I found it rebooting, or at least trying to. It seemed to be stuck in a loop. It would vibrate and show the Samsung logo, and then show the model logo (in my case "Samsung Galaxy SIII" with the cyanogenmod logo on the bottom half of the screen). After this, it would vibrate twice with around a two second delay between each vibration. Then it would show the Samsung logo, the model logo, and vibrate twice again, repeating indefinitely. The only thing that stops the loop is pulling the battery.
At this point I'm thinking that there's a problem with the battery. I kept it plugged in to my computer for a little while while it tried to boot, hoping that it just needed to be charged. After this didn't work, I tried charging it with a portable battery pack I had and used a different cable. Still nothing. Then, I found a spare battery that I had and replaced the one I had been using. That didn't work either, the phone continued doing the same boot loop.
I don't believe that the problem is a faulty power button, since it doesn't start trying to boot until I either plug it in to charge or I press the power button myself. I can't seem to enter recovery mode. Whenever I try, it shows the initial Samsung logo screen with "Recovery Booting...." in small blue text in the top left corner of the screen, but then proceeds to reboot again.
I am, however, able to enter download mode. I decided to try and flash my stock firmware, hoping that would fix the problem. I put my phone in download mode, opened odin, and it seemed to recognize my phone. I loaded the .md5 file and hit start, but almost immediately it showed 'FAIL'. This is what it said in the message box:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T999VVLUFNF1_T999VYVLFNF1_T999VVLUFNF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Write)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
At this point I have no idea what else I can do. I hope it's not a hardware failure, but it's starting to look like that's the case. Is there anything else I can try, or is my phone just dead? And, if it is dead, does anyone know the exact cause?

CM is your rom, not your firmware. The firmware is what we generally refer to as everything but system, kernel and recovery. Do you know what your current firmware build is?
Are you certain you downloaded the Wind version of the firmware?
I could be wrong but from the Odin output it looks like you have pre 4.3 firmware. If so, try using any other build and see if it flashes.
Judging from the symptoms you described, it is possible you could be looking at a hardware failure. Possibly the SoC, but more likely the memory. If you cant get Odin to flash anything the possibility of this becomes greater.
Try other firmware with Odin. Try with and without re-partition checked. (This will wipe all your data)
Try flashing TWRP via Odin. If that makes recovery work you may then be able to factory reset and flash a rom again.
Try different usb cables and ports. Try another computer as well if nothing else is helping.
Beyond all of that, im not sure theres gonna be much you can do.

Argh, I always seem to get ROM and firmware mixed up. Anyway, If I'm understanding this correctly I'm pretty sure that my firmware was 4.2.2. I definitely downloaded the wind version of my stock firmware. I also found on my computer 4.0 firmware that I'd downloaded a couple years ago. I tried flashing that with odin and got the same result. Then I tried it with re-partition checked and it failed again with this:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T999VVLUFNF1_T999VYVLFNF1_T999VVLUFNF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Can't open the specified file. (Line: 1949)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I guess that's that then. Luckily I had backed up all my photos last week on a whim.

Out of curiosity, did you use a PIT file when repartitioning, or did it use the one in the device? Whichever it is, try the other as well. I believe the pit files are in the General section.

I used the PIT file on my device when I first tried to repartition. I downloaded the PIT file that you were talking about and tried again:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T999VVLUFNF1_T999VYVLFNF1_T999VVLUFNF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Write)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse

Did you try flashing recovery only? And does odin see the devices COM port in the top left?
Did you try different ports and cables?

Odin does see the COM port. I just tried flashing TWRP and odin said that it passed, but I'm still not able to boot into recovery mode. I have tried using another port but I don't have another cable on me.

Well if it said it passed the recovery flash, the cable and port are probably ok.
Im not really sure there is much else you can do tbh. Its sounding more like a hardware problem at this point.
Sorry I dont have anything better to tell you, but if I think of anything else you could try ill let you know.

[Q] Help with unbrinking Samsung Galaxy Grand Duos i9082 (Soft bricked)

I tried to root my phone, but i goofed up somehow. Odin FAILED in the middle of the process, and got soft-bricked. When I turn the phone on now I get "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again" (cs3-4.4pda.to/2767010.jpg):crying:
When I tried again, I get the following message in Odin:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CWM-touch_i9082_chotu.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> __Xmit Write fail
<ID:0/003> XmitData Fail..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
If I try in keis, it says phone not compatible. Probably because of the bit counter thing. When i try to press volume down, home, power get:
Current bin: coustom
system status: official
Click to expand...
Click to collapse
I cannot enter into wipe mode: ie., volume up, home, power.
How should I proceed now? Any help is appreciated.
Also if anyone has link to Samsung Galaxy Grand Duos i9082 official rom, and steps to install it that would be great. I tried downloading from sammobile, but it is dead slow.

Don't Panic
Just Download A FrimWare from Sammobile.com
Then Flash It VIA Odin 3.07

Memo Yasso said:
Don't Panic
Just Download A FrimWare from Sammobile.com
Then Flash It VIA Odin 3.07
Click to expand...
Click to collapse
I am sorry, but any other mirror available? other than sammobile that is. It is really really slow... I am ready to wait (it says 9 hours left to download) but download failed 5 times before, I have to restart it from the beginning

insp1 said:
I am sorry, but any other mirror available? other than sammobile that is. It is really really slow... I am ready to wait (it says 9 hours left to download) but download failed 5 times before, I have to restart it from the beginning
Click to expand...
Click to collapse
Try This :
https://www.mediafire.com/?2t9xag9mmg84o11

[Q] Stock note 2 bootloop

Hi, so my cousin gave me her note 2 and told me to fix it! its basically on a bootloop so first thing i thought of was to flash stock firmware,
So i did that and the Samsung logo just flashes for eternity :| she hasn't done anything like rooting etc.
So i downloaded the UK stock firmware(her note 2 is the THR) but it's still in bootloop!
I can't get into recovery to wipe data! when i hold the key combos, it just keeps rebooting (samsung note II - n7100 black and white one)
(I actually needed help flashing the rom but not its fixed i need help with this and i didn't want to make another thread)
should i try to use put and re-partition?!

kamranhaghighi said:
Hi, so my cousin gave me her note 2 and told me to fix it! its basically on a boot loop so first thing i thought of was to flash stock firmware
so i downloaded the UK firmware (although i have no idea what country it is, but it doesn't make difference right?!)
and it gave me this:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXALJ1_N7100OXXALJ1_N7100XXALIH_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> system.img
<ID:0/009> NAND Write Start!!
<ID:0/009> boot.img
<ID:0/009> recovery.img
<ID:0/009> cache.img
<ID:0/009> hidden.img
<ID:0/009> modem.bin
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
what should i do ?
i have windows 8 and odin 3.09
Edit: I got the firmware from here :
http://www.cnet.com/how-to/how-to-restore-a-galaxy-note-2-from-rooted-to-factory-settings/
My country's firmware is not available anywhere
Click to expand...
Click to collapse
Hello ,
many months ago I had a problem to install a Samsung rom. For me the solution was :
Download firmware from sammobile
Use Odin PC 3.07 (It doesn't work with 3.09 version I don't know why )
I hope that can help you.

gb61 said:
Hello ,
many months ago I had a problem to install a Samsung rom. For me the solution was :
Download firmware from sammobile
Use Odin PC 3.07 (It doesn't work with 3.09 version I don't know why )
I hope that can help you.
Click to expand...
Click to collapse
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXALJ1_N7100OXXALJ1_N7100XXALIH_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> system.img
<ID:0/009> NAND Write Start!!
<ID:0/009> boot.img
<ID:0/009> recovery.img
<ID:0/009> cache.img
<ID:0/009> hidden.img
<ID:0/009> modem.bin
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<ID:0/009> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
it might be because i'm using UK firmware.
Iran's firmware isn't available!
(i used 3.04 but its old anyway !)
I'm driven crazy i will just wait for an answer :|

kamranhaghighi said:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXALJ1_N7100OXXALJ1_N7100XXALIH_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> system.img
<ID:0/009> NAND Write Start!!
<ID:0/009> boot.img
<ID:0/009> recovery.img
<ID:0/009> cache.img
<ID:0/009> hidden.img
<ID:0/009> modem.bin
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<ID:0/009> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
it might be because i'm using UK firmware.
Iran's firmware isn't available!
(i used 3.04 but its old anyway !)
I'm driven crazy i will just wait for an answer :|
Click to expand...
Click to collapse
It should be good to try with Odin more recent if you can.
Iran firmware on the image .

How did you find it i saw that website too but i couldn't find the firmware!
I will try odin 3.07 and post results

gb61 said:
It should be good to try with Odin more recent if you can.
Iran firmware on the image .
Click to expand...
Click to collapse
YEAH! it worked ! thanks so much but i'm afraid it will not work, im still on samsung lighting up and down but i only waited like 1min, it had this problem expect it would not boot at all!
EDIT: ok flashing stock didn't help. i still got bootloop, any idea how to fix this?!
i also can't get into recovery, it only gives me a red led when i hold volUp+Home+power!
i did a few things now i can't even flash the old one with 3.0.7, gives the same error it did on 3.09 , i give uP! somebody help me :|

gb61 said:
It should be good to try with Odin more recent if you can.
Iran firmware on the image .
Click to expand...
Click to collapse
flashing the one i got from sammobile gives me this:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXDMC3_N7100OJVDMC1_N7100XXDLK7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> sboot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
edit: sounds like it is because its an old firmware!
now i can't even flash the UK with 3.07!

should i make a new thread for my bootloop? (i still got bootloop after going stock)

kamranhaghighi said:
should i make a new thread for my bootloop? (i still got bootloop after going stock)
Click to expand...
Click to collapse
Hello,
have you try to install a custom rom ?

gb61 said:
Hello,
have you try to install a custom rom ?
Click to expand...
Click to collapse
No!

kamranhaghighi said:
No!
Click to expand...
Click to collapse
Have you see in the link in the edit of my last post ?
At this moment you can't acces to recovery ?

gb61 said:
Have you see in the link in the edit of my last post ?
At this moment you can't acces to recovery ?
Click to expand...
Click to collapse
I just saw it now, and no i can't get into recovery, i will read the link you gave me tomorrow, im super tired today! and also have an exam

my guess is the eMMC chip has failed, or the partition is corrupted. Yoiu might try and flash the PIT but i suspect that wont work. This type of failure is unfortunately quite common from my experience. My Note 2 had the same problem and still cant find a fix.

grwalker said:
my guess is the eMMC chip has failed, or the partition is corrupted. Yoiu might try and flash the PIT but i suspect that wont work. This type of failure is unfortunately quite common from my experience. My Note 2 had the same problem and still cant find a fix.
Click to expand...
Click to collapse
sorry for your note 2!
hope its no longer like that in note 3 and 4 :! (i got the note 4!)

kamranhaghighi said:
sorry for your note 2!
hope its no longer like that in note 3 and 4 :! (i got the note 4!)
Click to expand...
Click to collapse
Hello,
try that :
Install a recovery with Odin PC
download original CWM note 2 :https://mega.co.nz/#!rY1DmZ7J!JzeUWnC-X1_0jO42aoydRAYakgPQMo9RgHqAHyRGWyI
download TWRP : https://mega.co.nz/#!jNdQwaib!BdXte5RXjPVg7YLVjHS6WjbMZzfS-DJk6IPW6jPvyWs
Download a custom rom for Note 2 :
copy and paste CWM ,TWRP and custom rom on your SdCard
Install CWM with Odin PC , if doesn't work try with TWRP.
If it works , install the rom with recovery
I hope that will help you.

gb61 said:
Hello,
try that :
Install a recovery with Odin PC
download original CWM note 2 :https://mega.co.nz/#!rY1DmZ7J!JzeUWnC-X1_0jO42aoydRAYakgPQMo9RgHqAHyRGWyI
download TWRP : https://mega.co.nz/#!jNdQwaib!BdXte5RXjPVg7YLVjHS6WjbMZzfS-DJk6IPW6jPvyWs
Download a custom rom for Note 2 :
copy and paste CWM ,TWRP and custom rom on your SdCard
Install CWM with Odin PC , if doesn't work try with TWRP.
If it works , install the rom with recovery
I hope that will help you.
Click to expand...
Click to collapse
i'm also going to check re-partition and use pit file. is that a good idea?

i can't get into twrp, cwm either, it just reboots from white n7100 logo and it tries too boot os the next time!

kamranhaghighi said:
i can't get into twrp, cwm either, it just reboots from white n7100 logo and it tries too boot os the next time!
Click to expand...
Click to collapse
Have you follow this steps ?
How to Install ClockworkMod Recovery 6.0.4.4 on Galaxy Note 2 N7100
Download Odin v3.09.
Extract Odin zip file and you will get Odin3 v3.09.exe along with few other files.
Power off your Android device. Wait 5-6 seconds for vibration to confirm complete switch off.
Now, put the Galaxy Note 2 N7100 in Download Mode by pressing and holding down the Volume Down, Home and the Power button together. A warning screen will come up; press Volume Up button to enter Download Mode.
Now run Odin3 v3.09.exe (see Step 3) as an Administrator because Admin privileges is required to complete the process smoothly (only applicable Windows Vista and higher).
Now connect your device to your PC using USB cable. An “Added!!” massage will appear in Odin’s message box. If you don’t get the same then you should try another USB port (try USB port located in back in your desktop PC). If that too don’t work then you should reinstall the driver. If you successfully see the “Added!!” message in Odin then you are ready to go in next step. You should also see COM port with a number in Yellow if you successfully added your device.
Click the AP Button, and select that .tar.md5 file that you downloaded earlier. If you are using old Odin then add the file to PDA button.
In Odin window, make sure only Auto Reboot and F. Reset Time checkboxes are selected.
Double check everything that we mentioned in Step 7 & Step 8 above. Now, once satisfied hit the START button to begin the flashing process.
Once flashing completed, your Galaxy Note 2 N7100 will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

kamranhaghighi said:
i can't get into twrp, cwm either, it just reboots from white n7100 logo and it tries too boot os the next time!
Click to expand...
Click to collapse
Ok,
we try to install a full wipe rom :
Download this zip : https://mega.co.nz/#!KN1QiZyJ!tKkqdUSYOtuLI4_4TRe8ZpXsHb3G608KsJd5XNf6EhU
Extract the files = 4 .tar and 1 .pit
Put this file in odin like in the picture = FLASH WITH PIT (RE-PARTITION)

gb61 said:
Ok,
we try to install a full wipe rom :
Download this zip : https://mega.co.nz/#!KN1QiZyJ!tKkqdUSYOtuLI4_4TRe8ZpXsHb3G608KsJd5XNf6EhU
Extract the files = 4 .tar and 1 .pit
Put this file in odin like in the picture = FLASH WITH PIT (RE-PARTITION)
Click to expand...
Click to collapse
ok thanks! btw in the process of doing this i gave myself a nice electric shock 0_0 it came from 2 connectors from back of the device ! i got pass anyway
edit: it will take an hour~ i will post results when its done!

No PIT found in Odin

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925T_UVU2COF8_BASEBAND.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
I get this anytime I try to do a flash, not for sure what to do. kinda bricked right now, but been doing some research and I see that bthere is a PIT file i can flash back onto it? but I cant find it for the S6, do we have access to a PIT file yet? can anyone help me please?

I had a similar issue the last time I flashed a Custom ROM then tried flashing a firmware afterwards - I was able to get around by shutting down Odin completely - disconnect and reboot the phone in download mode after it fails by holding the volume down-power-home buttons - reconnect phone to PC then open up Odin. Might take 2 - 3 tries but eventually should work. Make sure you have the files in the right slot (BL/AP/CP) when you are flashing via Odin.

jlmnote said:
I had a similar issue the last time I flashed a Custom ROM then tried flashing a firmware afterwards - I was able to get around by shutting down Odin completely - disconnect and reboot the phone in download mode after it fails by holding the volume down-power-home buttons - reconnect phone to PC then open up Odin. Might take 2 - 3 tries but eventually should work. Make sure you have the files in the right slot (BL/AP/CP) when you are flashing via Odin.
Click to expand...
Click to collapse
sorry mi englesh (i`m brazilian)
I have same problem, buts after ( not a pit found) now is ( e: failed to mount )
helpe please.