Develop Bugs

My Samsung Note 2 is...BRICKED? Don't start (Galaxy Note 2 Brikkato, Non Parte !)

Hiii!!!
My Name is Adonis and i'm Italian Boy ^_^ Best fan for The GREAT JOB of This Site! i Vey Vey Love XDA! *_*
Mhhhh...but I try to ask your help..... :good: Pleasssseeeeee
I have the Some Problem with My NEW Samsung Galaxy Note 2....................
I recently installed a Root Permissions on Original Firmware, and I then installed a Custom Rom (I am Italian so I chose an Italian ROM COOKED ^ _ ^) of cis80. Up to yesterday's .. All okay!
For a Stroke, unfortunately, the phone started to reboot without any reason, and the last time it was restarted .. in a like Boot Loop... O_O The Phone Locked on screen "Samsung Galaxy Note 2 N7100" Without going on Next Logo of Loading (As Default What Samsung).
I've tried EVERYTHING .. but really .. I say to ALL! But nothing to do ..... What is the only one that I can to enter into "Download Mode" .. with Odin I've tried everything but everything I always returns "FAIL" or "Error Pit" & more .... or another Error. Also NAND Erase, nothing nothing... :_(
AIUTOOOOO!! I do not know Do! I have the Note 2 to 10 days c.a. ... and now I can't use it ..... My Beast is Down...

First, this isnt be .. a phone for kids.
Second, if you can enter into Download Mode, could be fixed. (If you couldnt enter you should need jig usb)
3rd, if you dont know what the hell are you doing, leave stock ROM.
Cya

Kashamalaga said:
First, this isnt be .. a phone for kids.
Second, if you can enter into Download Mode, could be fixed. (If you couldnt enter you should need jig usb)
3rd, if you dont know what the hell are you doing, leave stock ROM.
Cya
Click to expand...
Click to collapse
Ok Thanks.
But i Try....and i don't have any solution.
i tried load a Stock ROM with ODIN....but i have a Error....Because i have a "Error with a Table Partition"... "Error with Pit File"....i try load a Pit file, but not load anything.... can i do?

This is un example of report of ODIN:
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_N7100XXALIH.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100OXXALJ1_BTU_CSC_factory.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Removed!!
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_N7100_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
Click to expand...
Click to collapse
and ODIN with last line come in standby... if i insert a PIT File for remapping of partition..if i not insert this, say there is an error with partition..... (
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
Click to expand...
Click to collapse

Adonis4U said:
This is un example of report of ODIN:
and ODIN with last line come in standby... if i insert a PIT File for remapping of partition..if i not insert this, say there is an error with partition..... (
Click to expand...
Click to collapse
What version of odin r u using? Try to get 1.85 version, redownload software for ur note2(try diferent version), run as administrator and try again.
Sent from my GT-N7100 using xda premium

szymi22 said:
What version of odin r u using? Try to get 1.85 version, redownload software for ur note2(try diferent version), run as administrator and try again.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
I used the Version 3.04 e 3.07. But the Version 1.85 Not. Ok i Try!
I Tried used various Version of Stcok Firmware...All Italian...but nothingfor All...

Adonis4U said:
I used the Version 3.04 e 3.07. But the Version 1.85 Not. Ok i Try!
I Tried used various Version of Stcok Firmware...All Italian...but nothingfor All...
Click to expand...
Click to collapse
Try 1.85 odin and if that wont help try to download non italian rom, uk one works for me before when i fixed my friend note 2
Sent from my GT-N7100 using xda premium

You try
1. download Stock ROM file
2. Use Odin 3.07 (recommend)
3. Open Odin (on computer use normal harddisk. Not solid stat drive,SSD) check Auto Reboot and F. rest Time and Nand Erase All OR Repartition (If you have PIT file)
4. Check PDA and select Stock ROM (your downloaded)
5. Start
6. Finished Flash Rom. You Remove USB and restart Your phone will stop at samsung logo. Never mine. You restart again (Hold power button). Enter stock recovery mode (Vol Up + Home + power button).Your Phone show error can't read data.
7. In stock recovery menu. You check wipe cache. and wipe cache+factory reset. and restart your phone.
8. Your phone may come back normal.
good luck.

[Q] n7100 bricked? Ok dl mode, no recovery

Hello,
I have seen my note2 die in front of my eyes :/ reading a whatsapp the screen turned weird and shutdown, never to live again I fear.
I guess nand corruption? Infact was freezing and rebooting every now and then.
Model is n7100 international version (got it from an italian provider), rooted with samsung galaxy note 2 toolkit.
My flash counter is 1 and I read custom everywhere in the download mode. I'd give this to service centre but I guess I can't like this, right?
Any way of resetting flash counter from download mode? tried stock recovery and rom to no avail
So I can only enter download mode correctly and flash, no booting as stuck at samsung's glowing logo.
Results: tried flashing cwm (tried several versions from the main thread on xda http://forum.xda-developers.com/showthread.php?t=2000138) flashes OK, but does not work entering recovery (I try invoking recovery by turning the phone on, having volume up and home button pressed) but the phone hangs in a loop.
My aim is to: access mounts (extract data from sdcard0, internal), wipe it/delete everything, flash stock rom and recovery.
I can only flash recovery image successfully, the original sammobile rom for n7100 will pass md5 correctly but won't flash in the end
BTW all flashes require a double md5 check and a double pressure of start to go on...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXDMC3_N7100ITVDMB1_N7100XXDLK7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Added!!
<OSM> All threads completed. (succeed 0 / failed 0)
[here I press start again]
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXDMC3_N7100ITVDMB1_N7100XXDLK7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> sboot.bin
<ID:0/013> NAND Write Start!!
<ID:0/013>
<ID:0/013> Complete(Write) operation failed.
<ID:0/013> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
OTHER try with other sam.updates rom for my device = success in flashing, not in booting.
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXDLL4_N7100VFGDLL2_N7100BUDLL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> boot.img
<ID:0/013> NAND Write Start!!
<ID:0/013> recovery.img
<ID:0/013> system.img
<ID:0/013> modem.bin
<ID:0/013> cache.img
<ID:0/013> hidden.img
<ID:0/013> RQT_CLOSE !!
<ID:0/013> RES OK !!
<ID:0/013> Completed..
<ID:0/013> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/013> Removed!!
I asked krollontrack about data recovery but they do not offer the service on cell phones as results are flaky.
My flash counter is 1 and I read custom everywhere in the download mode. I'd give this to service centre but I guess I can't like this, right?

#G# said:
Hello,
I have seen my note2 die in front of my eyes :/ reading a whatsapp the screen turned weird and shutdown, never to live again I fear.
I guess nand corruption? Infact was freezing and rebooting every now and then.
Model is n7100 international version (got it from an italian provider), rooted with samsung galaxy note 2 toolkit.
So I can only enter download mode correctly and flash, no booting as stuck at samsung's glowing logo.
Results: tried flashing cwm (tried several versions from the main thread on xda http://forum.xda-developers.com/showthread.php?t=2000138) flashes OK, but does not work entering recovery (I try invoking recovery by turning the phone on, having volume up and home button pressed) but the phone hangs in a loop.
My aim is to: access mounts (extract data from sdcard0, internal), wipe it/delete everything, flash stock rom and recovery.
I can only flash recovery image successfully, the original sammobile rom for n7100 will pass md5 correctly but won't flash in the end
BTW all flashes require a double md5 check and a double pressure of start to go on...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXDMC3_N7100ITVDMB1_N7100XXDLK7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Added!!
<OSM> All threads completed. (succeed 0 / failed 0)
[here I press start again]
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXDMC3_N7100ITVDMB1_N7100XXDLK7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> sboot.bin
<ID:0/013> NAND Write Start!!
<ID:0/013>
<ID:0/013> Complete(Write) operation failed.
<ID:0/013> Added!!
<OSM> All threads completed. (succeed 0 / failed 1
I asked krollontrack about data recovery but they do not offer the service on cell phones as results are flaky.
My flash counter is 1 and I read custom everywhere in the download mode. I'd give this to service centre but I guess I can't like this, right?
Click to expand...
Click to collapse
Just tell Service Center sudden death. They might replaced it for you. I try before.

could it have been cos of your nickname resembling reality?
88sexylady said:
Just tell Service Center sudden death. They might replaced it for you. I try before.
Click to expand...
Click to collapse
Aha! I am thinking about trying, maybe I should send a sexy lady to they guy at the front desk to gain the same attention
Hadn't even thought about flash counters...
Infact if it was possible I'd like to reset flash count from download mode, or... make it so the screen actually stays off )
G

I had this with my SGS 3.
I tried to flash a different framework and got boot loop. Tried flashing a stock rom with odin and once it restarted it would boot loop again and odin would say fail.
I flashed cf root kernel with odin to get CWM and then used Zoots wipe script (mega wipe) to bring it back to bare bones. Then took out the battery and put it back in and 3 button into download mode and then flashed the stock rom again... This time it booted up. There is always hope as long as you can get download mode my friend
Sent from my GT-N7100 using xda premium

and again
and again.
turned off at 2% battery to replace the battery with the spare one.
Waited for full shutdown etc -> boot loop. Shut! Had twrt recovery and could copy data over to the sd (just a couple of things I was missing from the latest backup).
Why? No understanding. Did not dig (formatting dalvik I also accidentally formatted /system and data (...)), yet I am surprised: twice in 12 months.
Great phone for the rest.
Odin showed no mercy for a while... then magically worked, stock sammobile rom.
4.3 rocks and it still records phonecalls, major thing on the main phone for me.

[Q] Bricked GT-N7100, is the my problem hardware or software?

Good day, guys! Sorry if my first post is related to a problem. I'm pretty new to Android so please bear with me...
So I woke up this morning and my Note 2 won't completely boot, it goes as far as "Samsung Galaxy Note II GT-N7100" screen and just completely gets stuck. I tried to charge it but it just shows the empty battery icon. I left it charging overnight so I don't exactly know what happened. My phone is completely stock, rooted it before then un-rooted later. No custom ROM, no custom recovery etc.
I tried to boot to Recovery Mode but it won't let me. Luckily it can boot to Download Mode. I figured I would flash it to stock ROM since I was still at 4.1.1 maybe I would just update to 4.1.2. I downloaded the firmware from sammobile.com and used Odin but it fails every time with this message:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015>
<ID:0/015> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/015> Removed!!
Can someone point out the problem to me? I've read around that this is probably SDS but I'm still hoping that it's not. I bought my phone from another country so taking it back would be a little difficult.
Any help appreciated. Thank you!

[Q] Soft Bricked SGH-T999-Odin Fail-Can't Binary Counter

I have been trying to fix my soft bricked Galaxy S3 for a couple of days and nearly tearing my hair out at this point...
Ok I installed a nightly and yep came up dirty. So I needed to restore it. Any help would be fantastic
So far I have tried 2 different computers, two different USB cables, all the different ports on each computer.
I have tried every Odin version and nothing seems to help. I have tried restoring the latest Samsung updates (back to stock) and a root ROM....nothing. Is there a way that I can reset the binary counter since I believe this to be the problem? i know I can download triangle away from the Google Play store but how do I put it in the phone that is soft bricked? I can put it in Recovery Mode or Download Mode but as you see fixing it with Odin has proved illusive.
The farthest I have gotten is this:
In Odin 3.04
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_TMO_T999UVDMD5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
For the the Samsung stock I only get as far as "leave the cs" then when I wipe the data/cache and reboot I get that dreadful Samsung logo and it stays that way for hours.
Help???
Thanks!

the.seeker said:
I have been trying to fix my soft bricked Galaxy S3 for a couple of days and nearly tearing my hair out at this point...
Ok I installed a nightly and yep came up dirty. So I needed to restore it. Any help would be fantastic
So far I have tried 2 different computers, two different USB cables, all the different ports on each computer.
I have tried every Odin version and nothing seems to help. I have tried restoring the latest Samsung updates (back to stock) and a root ROM....nothing. Is there a way that I can reset the binary counter since I believe this to be the problem? i know I can download triangle away from the Google Play store but how do I put it in the phone that is soft bricked? I can put it in Recovery Mode or Download Mode but as you see fixing it with Odin has proved illusive.
The farthest I have gotten is this:
In Odin 3.04
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_TMO_T999UVDMD5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
For the the Samsung stock I only get as far as "leave the cs" then when I wipe the data/cache and reboot I get that dreadful Samsung logo and it stays that way for hours.
Help???
Thanks!
Click to expand...
Click to collapse
this is why you should have a nandroid. try fully wiping and restart. if that doesn't work try to use a different odin and make sure you downloaded the correct firmware.

You posted this already in an existing thread maybe 15mins ago and I answered a few min ago. No need to double post. Just be patient. It can sometimes take a few hours or more before someone who knows how to help will come on and answer. Especially later in the evening during the week.
Sent from my SGH-T999L using xda premium

Samsung Galaxy Note II stuck in the black screen

Dear all,
Thanks in advance. My friend have a Galaxy Note II, which stuck at the black screen with the word "Samsung GALAXY Note II GT-N7100". I try to go into recovery mode (Up, home and power button), it able to go inside with an android logo, but without selections for reset or recovery.
I then try to go into Download Mode (Down, Home and Power button), it seems able to go inside the mode with all the product name etc listed inside. While searching for the solution, i tried these:
http://forum.xda-developers.com/showthread.php?t=1896696
I try the first part which is flash a stock rom... but from the Odin interface, it stated there is no pit partition. I then turn off the phone and redo the procedure. When i try to start download the rom, this time it stated complete (write) operation failed.
I am not really familiar with these flash and odin and etc, just try my luck... but it seems no luck. Can anyone give me some advise on how to fix this? Thanks...
If further details is needed, just let me know, cause i am not sure what should information i should provide.
Thanks again....
** By the way, i realize that when ever i try to switch off the phone, it will automatically switched on but still stuck at the welcoming screen... it wont let me switch off.. **

xiaoyaotaigong said:
Dear all,
Thanks in advance. My friend have a Galaxy Note II, which stuck at the black screen with the word "Samsung GALAXY Note II GT-N7100". I try to go into recovery mode (Up, home and power button), it able to go inside with an android logo, but without selections for reset or recovery.
I then try to go into Download Mode (Down, Home and Power button), it seems able to go inside the mode with all the product name etc listed inside. While searching for the solution, i tried these:
http://forum.xda-developers.com/showthread.php?t=1896696
I try the first part which is flash a stock rom... but from the Odin interface, it stated there is no pit partition. I then turn off the phone and redo the procedure. When i try to start download the rom, this time it stated complete (write) operation failed.
I am not really familiar with these flash and odin and etc, just try my luck... but it seems no luck. Can anyone give me some advise on how to fix this? Thanks...
If further details is needed, just let me know, cause i am not sure what should information i should provide.
Thanks again....
** By the way, i realize that when ever i try to switch off the phone, it will automatically switched on but still stuck at the welcoming screen... it wont let me switch off.. **
Click to expand...
Click to collapse
post a picture of your download mode.. does it say model number is n7100?

It does shows N7100. Is there anything i can do to save this note II?
I can't find a way to upload a photo here...
ODIN MODE
PRODUCT NAME: GT-N7100
CUSTOM BINARY DOWNLOAD: Yes (4 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
KNDX WARANTY VOID: 1
AP SWREV: A2

I suggest downloading the stock firmware from here: http://www.sammobile.com/firmwares/database/GT-N7100/
Flash the firmware using Odin: http://forum.xda-developers.com/galaxy-s3/help/guide-odin-flash-guide-t1671969

audit13 said:
I suggest downloading the stock firmware from here: http://www.sammobile.com/firmwares/database/GT-N7100/
Flash the firmware using Odin: http://forum.xda-developers.com/galaxy-s3/help/guide-odin-flash-guide-t1671969
Click to expand...
Click to collapse
Hello, i downloaded from the sammobile and flash the firmware using Odin 3.04. The first time, it come out an info as below:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXDMF2_N7100OLBDMD2_N7100DXDMF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Next, i click START again, this time with the info below:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXDMF2_N7100OLBDMD2_N7100DXDMF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
May i know what should i do now to further troubleshoot this issue?
Thanks in advance