my touch is nt work properly.automaticaly open and close application simultaneously.(important is phone dnt fallen and display dnt broken it) i cnt use it phone.please give any solution.
Sane happns with me. Only solution is to clean my hands and screen. If there is dust on screen it registers wrong touches..
vbvn said:
Sane happns with me. Only solution is to clean my hands and screen. If there is dust on screen it registers wrong touches..
Click to expand...
Click to collapse
thanks.i will try it
Related
i have been using the p3300 for a month now an it was working fine but all of a sudden i couldn't use my stylus. i tried the screen allignment but the screen didnt respond so i restarted the device. this also didnt work. i also tried a soft reset. no results so i did a hard reset now i am stuck at the screen where it says " Tap to start your device "
Plz Help....
Hi
It sounds then like the touch function of the screen has stopped working.
If you have only had it a month depending on where you got it you may be able to return it.
Sorry about this
Cheers Dave
maybe
seems like that to me too
still i hope i wont need to
anyway thanks
no problem
Anytime
If you have not yet returned it, try taking the screen protector off if you have one on.
My screen stopped responding to touch a while back. When I took the protector off all was fine.
could be it
may be but i am not sure about it i will try it nonetheless
Thanks
screen needs rest ??
nope no use the screens gone crazy i guess
it recognises a few strokes when left for a few hours the goes dead again
maybe it need some rest
On the screen, round the edges make sure there’s no gunk under the gap between the case and screen. You will be surprised what can get under there. Flat Plastic tooth picks are good for clearing it
i am nooob
cant try it
dont really know how to remove the screen guard
cant find the seam
Hi
You might not be a Noob. You can only remove a Screen Guard/Protector if you have actually put one one.
Also i still dont think there is much you can do.
If it does work after a while it is possible that the screen calibration has gone haywire If you get chance to use it try doing that it may help
Cheers Dave
mine to same problem please help
helo all..
i got problem with my diamond..
task manager always popups, open and close and if i run program, it close automatic..
and the screen always hang, i can't use the touch, only can use the cursor..
(
help me please...
helpp
anybody?
have you tried a hard reset maybe the only thing that can help you now you will loose all your data so back up whatever you can.
i remember reading something about the diamond's touchscreen getting pushed in on one side making the resistive touch on that part of the screen too sensitive.
if i remember they said you can fix it by putting the diamond face down on a flat surface and putting some slight even pressure to re-align the screen.
definitely search this up before trying it as i'm just going off memory from something i read a long time ago
oh and definitely try a hard reset or even a different rom first.
Hey guys... when i flash any rom i am getting stuck on the align screen. It tells me to tap the target and so on... when i do it the cross (target) appeard again at the beginning on and on. Can't do anything with it... please help! sorry if this thread has been solved somewhere else... i couldn't find it via search.
Sounds like you might have a bad digitiser. Did you flash because the touchscreen was a problem?
If it wasn't, try flashing a different rom and see if that helps. Otherwise you might need to replace the LCD and digitiser - the digitiser is a thin sheet that fits over the LCD, it registers the touch of the stylus so the Hermes knows where its been touched... If it goes, it usually opens the start menu no matter where you touched the screen.
Good luck in fixing this.
well as you said... i was trying to flash the rom because of this problem (that you have described). I was just curious because the screen aligning was working and it recognized when i touched the target in the center of the cross. So if there's no other way how to get through this problem. I'll do it. Thanks a lot!
Dead Touchscreen, i said to myself its not a big deal i can live without it until i take it to tmobile to get fix. Five Min later got a text and i can't even click send to reply to the text now i honestly need the touchscreen... any alternative way to hit send?
dont just view it reply to it please...
Hello,
maybe this has a simple solution:
I had a dead touchscreen some days ago, even a reset didn't help. Then I removed the screen protector foil (Martin Fields) and everything was fine. Somehow the screen protector continuously triggered the touchscreen at one point so no other input was possible.
If you use a screen protector, try to remove it. Or try a hardreset.
If all else fails, you'll have to send your device in for fixing it. Until then, maybe you can get along with a software called MyMobiler. It lets you use the Phone right from your Computer via ActiveSync. So you should be able to send a message but I dont know if you get it installed without the use of touchscreen.
Dennis
Dennis78 said:
Hello,
maybe this has a simple solution:
I had a dead touchscreen some days ago, even a reset didn't help. Then I removed the screen protector foil (Martin Fields) and everything was fine. Somehow the screen protector continuously triggered the touchscreen at one point so no other input was possible.
If you use a screen protector, try to remove it. Or try a hardreset.
If all else fails, you'll have to send your device in for fixing it. Until then, maybe you can get along with a software called MyMobiler. It lets you use the Phone right from your Computer via ActiveSync. So you should be able to send a message but I dont know if you get it installed without the use of touchscreen.
Dennis
Click to expand...
Click to collapse
i know a program called Dashwire that works the same way but threw your Internet browser, and i think ur right about the screen part, at one point my screen kinda flex in when touch , now it sit flat.
Edit: There are ways to remap the keys http://forum.ppcgeeks.com/showthread.php?t=91134&highlight=remap+hardware+keys
That tip about removing the screen protector was spot on.
My TP2 is working again, I was worried for a couple of days
Thanks!
I have 2 years old OneX. Everthing was going fine. And suddenly I started to have some yellow spots on the screen at two places. I ignored them. Then problem increased. Now whenever I unlocked the phone my screen used to jump around. Like bottom portion of the display used to come at top etc etc. And their were pink glitches everywhere black colour was supposed to come (i.e. black color appeared pink).
I changed the rom to see if it solved the problem. Now, its getting worse.
Now i cant turn the screen on. I push power button and screen does not show. I get a call and screen does not light up and I randomly push the accept button (I know where accept button comes) to recieve the call. :crying:
The only way to make the screen come alive is by pressing the back of the phone. I push the back few times here and there and voila, screen comes on. But thats not the solution. I tried to locate the exact position where pressing the back makes the screen work. But cant locate it. Location is random.
So should I open my phone to check if there is any faulty cable or what ? Or is my phone dying ? I cant afford a new phone.. :crying:
If you don't have warranty you can open it up. It's already almost not working anyway so what's there to loose ? Maybe it's just a connector which needs a little push....maybe it's the display + digitizer/mainboard.
Mr Hofs said:
If you don't have warranty you can open it up. It's already almost not working anyway so what's there to loose ? Maybe it's just a connector which needs a little push....maybe it's the display + digitizer/mainboard.
Click to expand...
Click to collapse
I found the problem and its solution... I will have to gather enough courage to open up my phone...
Temporary solution is twisting the phone.
Same Exact Problem :- https://www.youtube.com/watch?v=VFvABvJXDc8
Solutions:- http://www.htconeforum.com/forum/htc-one-x-help/1124-htc-one-x-black-screen-problem-3.html#post8812
Definitely worth a shot
Mr Hofs said:
Definitely worth a shot
Click to expand...
Click to collapse
thanx... !!!
Mr Hofs said:
Definitely worth a shot
Click to expand...
Click to collapse
So today i decided to open the phone and repair it. I did that but now screen wont come on at all.. Not even pressing it at places or anything else.. Screen dont turn on at all.. I tried to open again and fix the flex cables again tightly.. But no luck.. It wont turn on.. I am screwed.... :crying: