helo all..
i got problem with my diamond..
task manager always popups, open and close and if i run program, it close automatic..
and the screen always hang, i can't use the touch, only can use the cursor..
(
help me please...
helpp
anybody?
have you tried a hard reset maybe the only thing that can help you now you will loose all your data so back up whatever you can.
i remember reading something about the diamond's touchscreen getting pushed in on one side making the resistive touch on that part of the screen too sensitive.
if i remember they said you can fix it by putting the diamond face down on a flat surface and putting some slight even pressure to re-align the screen.
definitely search this up before trying it as i'm just going off memory from something i read a long time ago
oh and definitely try a hard reset or even a different rom first.
Related
i have been using the p3300 for a month now an it was working fine but all of a sudden i couldn't use my stylus. i tried the screen allignment but the screen didnt respond so i restarted the device. this also didnt work. i also tried a soft reset. no results so i did a hard reset now i am stuck at the screen where it says " Tap to start your device "
Plz Help....
Hi
It sounds then like the touch function of the screen has stopped working.
If you have only had it a month depending on where you got it you may be able to return it.
Sorry about this
Cheers Dave
maybe
seems like that to me too
still i hope i wont need to
anyway thanks
no problem
Anytime
If you have not yet returned it, try taking the screen protector off if you have one on.
My screen stopped responding to touch a while back. When I took the protector off all was fine.
could be it
may be but i am not sure about it i will try it nonetheless
Thanks
screen needs rest ??
nope no use the screens gone crazy i guess
it recognises a few strokes when left for a few hours the goes dead again
maybe it need some rest
On the screen, round the edges make sure there’s no gunk under the gap between the case and screen. You will be surprised what can get under there. Flat Plastic tooth picks are good for clearing it
i am nooob
cant try it
dont really know how to remove the screen guard
cant find the seam
Hi
You might not be a Noob. You can only remove a Screen Guard/Protector if you have actually put one one.
Also i still dont think there is much you can do.
If it does work after a while it is possible that the screen calibration has gone haywire If you get chance to use it try doing that it may help
Cheers Dave
mine to same problem please help
my tp2 touch screen is not responding suddenly!!! the problem started only after i answered some call through the screen slider, however, the touch screen is not responding to my fingers ever since !!!!
now i'm operating the phone only through the buttons !! but as if it is not touch screen!!
anyone have a clue about what the problem can be?? please help me. my device runs wm 6.5 and this is the first time to have this problem, i did soft reset many times but no imrovment!!
I had SOD this early morning and it was my first, do you guys think there is a relation between these events???
I have the same problem.
Just happened this morning.
I was able to use my mobiler to access the screen.
Tried several hard resets. No luck.
Tried re-installing energy Rom (4.1)
Then tried the new Energy Rom (4.11) still no luck.
But then I got the big idea to go back to the stock ROM. Now I cannot use the on screen prompts to access "my mobiler"
Anybody have any suggestions or is it back to AT&T for a new phone?
so whe you back to the stock rom, did u get ur screen working again??
No. no workey
Now that stock rom is on. I keep going back to the "Sim Card Changed" screen. I can not tap "cancel" or "Next". I can use the hard buttons so I am able to get to the phone and then use keyboard to dial.
Still no touch screen. And no work around with keyboard to get to screen. need a "Tab" button. then might be okay.
this sucks.
Just a quick bump before I go to AT&t in the morning.
Try running task 29 and then flash back to a stock.
And have you tried taking your sim card out of you're phone? Maybe that will avoid the message.
i'm buying a black berry
Does your screen look as if an oily residue is under the touch screen part?
My screen stopped responding a few weeks after the appearance of the 'oil' and Vodafone swapped it with no problems. It seems like a fairly common problem
yes, I've got that oily spot and somehow i managed to relief the problem only for minutes when i raised the digitizer carefuly which got me the screen working for few minutes untill it went unresponsive again after while. I'm looking forward to do alcohol swab to this oily spot and will see weather this will solve the problem..
Hi All,
I searched and searched and couldn't find anything.
I have an issue which occurs only sometimes, so i can't put my finger on what is causing this.
I have used different ROMs and happens in everyone.
Currently running e2 ROM 2.5 on ATT Tilt2. When i and writing a text message via soft keyboard, i decide to save time and slide out my hard keyboard. When I do they the whole system freezes and the only way to get it back is back popping out the batt.
Anyone experence this, or have any ideas
Thanks,
JC
Noticed same thing. Sometimes sliding open keyboard freezes the phone completely. Didn't try another rom yet but am at the point of drilling a small hole in the casing so that i can reset it with my stylus without opening the case.
The Sense makes the phone very sluggish also, maybe it has something to do with it.
Same problem. I flashed the phone back to the STOCK Rom and still the same thing
U will notice in due time, The screen will start to give out and fudge up as well.
TRy THIS
Plug in the wall charger and see the ORange light turn on to indicate that it is charging.
Slide open the keyboard, Most LIkely the orange light would disappear.
If it disappeared then slide the keyboard back slowly into normal position until the light turns on. Once the light turns on u should be able to use the touch screen and the keyboard
BUT who wants to do that everytime they use the keyboard? Turn it in for warranty
Don't forget to reflash to stock rom and Undo HARD SPL :]
I doubt its software related. This issue is a known. Like my tilt 2 likes to reset itself if I open or close the keyboard to fast/hard. Especially if I let it slam shut. I think its a manufacturer defect or flaw of some kind. The battery contacts are comin loose for that split second when u open or close at times. A fix I read about is to wedge a piece of paper between the battery and the backcover. That will keep the battery firmly in place and pressed down. Its so the battery contacts will stay connected to device power contacts. Try it out and see if that helps. I haven't done that yet. I juss make sure to easily open and close keyboard. If I let keyboard slam shut, it'll power down and reboot. Thnkx for the tip about drilling a small hole in side of case so it can be reseted like that. Good idea. I get tired of always taking the back cover off if I need to reset.
Also the hd tweaks cab has an app with it called hd soft reset or something. Press the icon and u can soft reset.
-------------------------------------
Sent via the XDA Tapatalk App
Hey all,
I had flashed to the Extendir rom, http://forum.xda-developers.com/showthread.php?t=576361&highlight=2.07.401.1, and havent had a problem. not sure if its rom related or not but hey im not having a problem.
JC
Recently I began to notice a problem with my phone. Whenever I have the keyboard slid out the touch screen is almost non-responsive. So over the past few days I've tried observing what the exact problem is and I think it could be the cable/ribbon that connects the touch screen to the keyboard. I'll have to tilt the screen back and forth before it will actually recognize me touching it. And I've noticed when I rub that ribbon it seems to work. There's also a crease in the ribbon where it folds on it when you close it. I believe this is the problem but I'm not sure and I want any advice/tips I can get. If it is the cable can you order a new one and replace it yourself?
Thanks in advance
Any ideas anyone? I cant get it to half work so I can text and stuff but I have to press it hard and it still wont work at times so something somewhere or another is wrong.
Tripp-phpBB said:
Any ideas anyone? I cant get it to half work so I can text and stuff but I have to press it hard and it still wont work at times so something somewhere or another is wrong.
Click to expand...
Click to collapse
Flash the stock ROM and SPL, and do a warranty exchange. This isn't a device you want to open up unless you really know what you're doing and are certain of the issue. If you really want to give it a go, then just buy a non-functioning unit from eBay to use for parts. They can normally be had for less than $40.
Wow, I cant believe that I finally found someone with the same problem as I have.
At first I thought that it was a software issue and I reloaded the software on my device.
The screen responds to presses with the keyboard in, but extended it doesnt respond and only the external keyboard works.
So to type a nice long sms I would have to start it on my display, flick out the keyboard to carry on and then flick it back in before I could press send or anything.
How frustrating.
But I did a test now and flicking the keyboard out and then slowly slowly pushing it back in I can get to a stage where both the external keyboard and screen responds at the same time again.
Definitely a ribbon problem or something.
Only had this phone for a few months now and if it already doing this then I am not feeling too obtimistic about its future.
Well, time to take it in for a warranty repair. I wonder how much greaf I am in for now.
Time to pull out my awesome trusty Artemis out the cuboard.
Tripp-phpBB said:
If it is the cable can you order a new one and replace it yourself?
Click to expand...
Click to collapse
I had a friend that had this problem with his TP2 which I've successfully repaired. First thing if you want to do it yourself, go to youtube and look for the Rhodium disassembly video (this will help you a lot). It is not difficult to change any parts in the phone provided that you proceed with caution and take the necessary precautions.
If you are afraid or have never opened up a phone to fix parts, then I would suggest to send it to HTC - this would be devastating if you managed to break up the motherboard by mistake or any other parts in the process of fixing the flex cable.
Tripp --
Did you ever find resolution to your problem? Recently my phone started having the same problem, which I originally thought was related to messing up the calibration file when I put loaded xdandroid GBX0A.
However, it sounds like my problem is pretty similar to yours -- touchscreen works fine when the keyboard is closed, but when it is open it only registers on the bottom of the screen -- which is actually useful in some sense because I can still hit the soft keys in the messaging app and such, but not so useful if you want to scroll using the touch screen. If I play around with the z-hinge a bit, sometimes it starts working -- which sounds like the same thing that you described.
Sorry, I just seen your post but I never fixed mine as I went ahead and bought another phone (Evo) but I did research the problem quite extensively and the problem I believe lies in the ribbon that connects the two halves of the phone. If I remember correctly the motherboard is in the side with the keyboard and that's why when it's slide out, the touch screen won't respond correctly. You can find the part online and replace it yourself. I've taken mine apart and it's not that hard but as said, you need the right tools and to be very careful.
Hi guys
I have tried all the above
Last resort is i got sprite backyup to work
BUT HOW THE HELL DO YOU HIT "NEXT" OR "OK" FROM THE KEYBOARD AS SCREEN DOESNT WORK????
After I replaced the the whole screen assembly, about 2 cm of the screens right side is almost unresponsive to touch.
It always works, if i touch a spot on the screen that works 100% and then immediately after that touch a spot on the rigtht side.
Sometimes it also register a touch if I try like 10 times.
Could this be software? The phone is not rooted og flashed. I have tried to restore to factory defaults. I'm thinking maybe I could get lucky with a different ROM/Kernel?
I'm also wondering if it is a loose connection to the digitizer? But the I think its wierd that it works when I first "Activate" the screen by touching it on another spot first.
I hope someone can come up with some ideas to try before I open it up again, as it is quite hard to get appart, and I'm worried to brake the new screen.
Regards
TJMacGyver
have the same problem, and i dont think its a software problem you can test the touch screen by using htc help app go to : hardware misbehaving / hardware diagnostics / line drawing test you can view it by drawing lines on screen
have you found a solution to the above problem?