Related
Hi,
My HOX fell down a few times (never ever alcohol again!).. I noticed that the camera doesnt work anymore. When I open the camera app, the camera options appears, but the picture still is black. The Frontcam neither works!
I think, that a flex cable just got broken or went out. Could this be possible?
Im pretty sure that the camera itself not got broken and it's not a software issue!
If just the flex cable went out or something like that, I want to repair my HOX..
Thank You!
[email protected] said:
Hi,
My HOX fell down a few times (never ever alcohol again!).. I noticed that the camera doesnt work anymore. When I open the camera app, the camera options appears, but the picture still is black. The Frontcam neither works!
I think, that a flex cable just got broken or went out. Could this be possible?
Im pretty sure that the camera itself not got broken and it's not a software issue!
If just the flex cable went out or something like that, I want to repair my HOX..
Thank You!
Click to expand...
Click to collapse
you need to replace the entire camera...
But why dont both cameras work?!
What do you think just got broken?
[email protected] said:
But why dont both cameras work?!
What do you think just got broken?
Click to expand...
Click to collapse
probably the 2 cameras have one single cable connected to the motherboard... that cable could be broken or detached
Where can I check if the HOX really have one single cable for both cameras?!
[email protected] said:
Where can I check if the HOX really have one single cable for both cameras?!
Click to expand...
Click to collapse
ehehe good question, take that apart and check
More Answers?
Sent from my HTC One X using xda app-developers app
push
It's not very difficult to open the HOX -maybe have a look at youtube with suitable word, or search here in the forum.
As I had some problems with WLAN, and have seen some postst that it maybe can be caused by bad antenna-contacts I'd made it alogside looking a film in TV. You just have to get out the SIM, and Tesafilm to fix the volume and On/Off Key. No more tools needed.
removed.
Very nice review, my friend. I've been looking around for a good security camera for the home that is wireless. This one seems to have an AC output needed for power and by the looks of it doesn't seem like it would be weatherproof. Do you know if it can be mounted outside? Thanks .
Thank you for the review.
I've been thinking of getting 2~3 IP camera's when I move to my own house (hopefully soon). These look good for the price.
Do you have any idea if these work with Synology Surveillance Station? I'd like to manage the cams on my Synology NAS, and keep the recordings stored on it. Unfortunately, the brand is not on Synology's Camera Support List.
Do you happen to own a Synology and want to test Surveillance Station? Many thanks in advance!
I'm pretty sure they will not work with that system. As a matter of fact, I got confirmation that other outdoor camera from the same ESCAM company will not integrate with that app, but they are working on updated version, to be released soon.
That Synology sounds a bit too complicated, surveillance for professional use/monitoring. Sorry, don't have or use anything like that. I was very impressed with a simplicity of the camera above and will wait for their outdoor version to add to a few outside monitoring points (just to catch neighbors walking their dogs on our lawn lol!!!). For home, I just need it to monitor my kids and when we are away on vacation.
Motion detection
Hi, don't you know, that this Escam Pearl camera has motion detection, which sends pictures to FTP/e-mail? I can't see it in specs..
Thanks a lot!
PedroKV
pedrokv said:
Hi, don't you know, that this Escam Pearl camera has motion detection, which sends pictures to FTP/e-mail? I can't see it in specs..
Click to expand...
Click to collapse
Take a look at the one but last picture. Guess it does.
@vectron
There is a microSDHC card reader to store recordings locally, and you can store them on your Windows pc as well? Is there any option to save the recordings on a network share (e.g. on a NAS) (without a computer running)?
JoWannes said:
Take a look at the one but last picture. Guess it does.
@vectron
There is a microSDHC card reader to store recordings locally, and you can store them on your Windows pc as well? Is there any option to save the recordings on a network share (e.g. on a NAS) (without a computer running)?
Click to expand...
Click to collapse
No, unfortunately it either records directly to microSD or when you click manually from a phone/tablet or PC where it gets stored locally. Maybe you need something more advance for what you are looking for. Maybe something like Dropcam, though it cost $200 per indoor cam and $99 annually to have cloud recording (I think 1 week stored interval only, for more you need to pay a lot more). This ESCAM solution is really for a budget oriented surveillance. They just need to add outdoor camera support to their app, and it will be pretty good. For NAS storage, it probably needs some extra security options enabled or something (sorry, have no idea about this stuff, so just guessing).
vectron said:
Unfortunately, it's not weatherproof. This is for indoor use or if you mount it by the window looking outside for outdoor surveillance. I see DX has a lot of other ESCAM cameras for outdoor use: http://www.dx.com/s/escam - I will request to get some for review, and will ask which one they can suggest to me that integrates with their current app. That would be an ultimate solution to have a split screen with multiple views of indoor and outdoor monitoring points. Btw, it supports more than 4 views, since i see Windows app with 16 views. DX, also has a dedicated page for this QF100 camera now : http://c.dx.com/collection/201408/e..._medium=homerotate&utm_campaign=20140812escam
I actually think this wireless outdoor ESCAM version will work great with it: http://www.dx.com/p/escam-q6320wifi...w-24-ir-led-white-eu-plug-318846#.U-zR12O5Q08 - I will try to get a review sample to see how it integrates with QF100 and common app control.
I do have and reviewed DropCam as well. It's a nice camera which I use often when my kids are in the basement playing. But it's limited to a fixed wide angle and after awhile it overheats because it's such a tight design with hardly any airflow (also for internal use only). The biggest problem - you have to pay monthly fee to get video access, beside $200 price tag.
But honestly, this QF100 camera is very good for $56 and has a lot of features. Definitely recommend it!
Click to expand...
Click to collapse
Thanks for the reply, buddy. I def agree with you. This is a great budget camera and I honestly don't feel that DropCam is worth it at all. I'm not a big fan of annual fees with limitations on storage capacity. A camera system should be straight forward and simple for you to have complete access to because it is YOURS. I really hope a perfect outdoor system comes. Let me know how it turns out when you get that review sample .
opasha said:
Thanks for the reply, buddy. I def agree with you. This is a great budget camera and I honestly don't feel that DropCam is worth it at all. I'm not a big fan of annual fees with limitations on storage capacity. A camera system should be straight forward and simple for you to have complete access to because it is YOURS. I really hope a perfect outdoor system comes. Let me know how it turns out when you get that review sample .
Click to expand...
Click to collapse
I got confirmation that outdoor camera they have right now will not integrate with their app. They are working on a new version of outdoor camera (I just assume the same guts as QF100 inside of their current outdoor camera enclosure), and I will update my review as soon as I get a sample!
Btw, Anker is working on their own version of "dropcam" ip camera, without monthly paid subscription but for indoor only. Will be interesting to see what they come up with (I was selected for beta testing, so perhaps will have my impressions in a few weeks).
vectron said:
I got confirmation that outdoor camera they have right now will not integrate with their app. They are working on a new version of outdoor camera (I just assume the same guts as QF100 inside of their current outdoor camera enclosure), and I will update my review as soon as I get a sample!
Btw, Anker is working on their own version of "dropcam" ip camera, without monthly paid subscription but for indoor only. Will be interesting to see what they come up with (I was selected for beta testing, so perhaps will have my impressions in a few weeks).
Click to expand...
Click to collapse
Sounds good. Keep us posted. Sorry for the late replies, been pretty busy :angel:.
Hi,
I've just received that cam from DealExtreme.
Good Quality, all perfect on WiFi but, have you tested the factory DDNS to access from an outside network?
Vintorlok said:
Hi,
I've just received that cam from DealExtreme.
Good Quality, all perfect on WiFi but, have you tested the factory DDNS to access from an outside network?
Click to expand...
Click to collapse
Hi
I'm wanting to get some of these cams from DealExtreme and mount them externally, but how to do cable them with the huge LAN/Power connector on the end?
Vintorlok said:
Hi,
I've just received that cam from DealExtreme.
Good Quality, all perfect on WiFi but, have you tested the factory DDNS to access from an outside network?
Click to expand...
Click to collapse
Absolutely! Nothing needs to be configured, everything works by default. The day I had this camera setup and tested at home on my wifi, I was checking it remotely, later when over at friends house.
chris_h16 said:
Hi
I'm wanting to get some of these cams from DealExtreme and mount them externally, but how to do cable them with the huge LAN/Power connector on the end?
Click to expand...
Click to collapse
These cameras designed for internal (inside of the house) use only. Their housing is not designed for outside use, but the company is working on a new outside version that will work with the same control app. No need to use LAN cable since it's wireless. With power connector, unfortunately, no way around it. Need to bring out the wires. Btw, that is a common power tip on the connector and you can get usb cables with an adapter for that connector. So in theory you can power up multiple cameras from usb ac wall charger, like those 5 port ones from anker or bolse.
vectron said:
These cameras designed for internal (inside of the house) use only. Their housing is not designed for outside use, but the company is working on a new outside version that will work with the same control app. No need to use LAN cable since it's wireless. With power connector, unfortunately, no way around it. Need to bring out the wires. Btw, that is a common power tip on the connector and you can get usb cables with an adapter for that connector. So in theory you can power up multiple cameras from usb ac wall charger, like those 5 port ones from anker or bolse.
Click to expand...
Click to collapse
There's loads of escam outdoor cameras on dealextreme.
vectron said:
Absolutely! Nothing needs to be configured, everything works by default. The day I had this camera setup and tested at home on my wifi, I was checking it remotely, later when over at friends house.
Click to expand...
Click to collapse
Hi Vectron,
I've tried it, typing on an outside network the dns URL http://XXXXXX.ipcam.so but I get this message:
Account [XXXXX] is offline.
What do I have to config to make it work?
chris_h16 said:
There's loads of escam outdoor cameras on dealextreme.
Click to expand...
Click to collapse
None of them integrate with the same app used by QF100. It's not just about the camera. You want to have different cameras connecting to one app so you can monitor everything at once, rather than use different apps for different cameras ESCAM is working on a new outdoor version that will work with their existing app.
Vintorlok said:
Hi Vectron,
I've tried it, typing on an outside network the dns URL http://XXXXXX.ipcam.so but I get this message:
Account [XXXXX] is offline.
What do I have to config to make it work?
Click to expand...
Click to collapse
Sorry, I only use an app from my phone, and it works on wifi and 4G LTE. I'm not accessing it from the laptop/web browser.
Is there a good alternative for Synology Surveillance Station that works with the QF100?
The phone app doesn't work on 4g. Status is connection and nothing happens...
Has anyone got this to work other than reviewer?
I largely purchased this camera based on the review here...What a disappointment, either everyone is receiving a different version or the reviewer is making false claims... The camera does NOT work outside of the local LAN! This makes it useless. DDNS does not work. I'm computer savvy have a few other IP cameras and this model is not accessible outside the LAN even if you open all ports on the router. Support requests unanswered... the app is garbage, this camera does not work with other Android apps either, a wasted $60...
Hi,
I've owned my G-Pad since April, but it wasn't until yesterday did I use earphones with it; only to discover that it only comes through one ear. I've tried multiple earphones and headphones; both with and without mics on them.
Since I've bought it over 4 months ago, I can't return it/exchange it for a new one.
Is this a common problem? And is there a fix?
AzNTypeR said:
Hi,
I've owned my G-Pad since April, but it wasn't until yesterday did I use earphones with it; only to discover that it only comes through one ear. I've tried multiple earphones and headphones; both with and without mics on them.
Since I've bought it over 4 months ago, I can't return it/exchange it for a new one.
Is this a common problem? And is there a fix?
Click to expand...
Click to collapse
Silly, question, do you have a case on the device? I've found that some cases prevent the earphone plug from going in all the way (even though it appears like the plug is fully pushed in and even feels like it is). Try taking the device out of the case (if you have one) and test again.
muiriddin said:
Silly, question, do you have a case on the device? I've found that some cases prevent the earphone plug from going in all the way (even though it appears like the plug is fully pushed in and even feels like it is). Try taking the device out of the case (if you have one) and test again.
Click to expand...
Click to collapse
Nope, that didn't work either. ;/
Could my unit be fautly then?
AzNTypeR said:
Nope, that didn't work either. ;/
Could my unit be fautly then?
Click to expand...
Click to collapse
Unfortunately more than likely. Make sure that the balance setting in accessibility is set at the middle and that the mode is set to stereo.
Hi,
I have an Android 5.1 .1 unit with RK3188 chip 1G RAM. All works well but there is a weird rear camera issue. When I start the car and switch to backup gear, the rear camera always works normally, however, after driving 10 minutes or longer the camera does not work anymore and the screen shows an exclamation mark when gear switched to backup. This happens approximately 80% times, while the other 20% times the camera would work OK even after long driving time.
The camera is wired normally with power connected to backup light. Backup light power is also connect to the head unit as trigger for rear camera video.
I was initially thinking this could be a bad camera issue, but the problem persists after installation of a new camera. So it must be the unit.
Has anyone else experienced similar problem? Any help to fix the issue is much appreciated.
yves31 said:
Hi,
I have an Android 5.1 .1 unit with RK3188 chip 1G RAM. All works well but there is a weird rear camera issue. When I start the car and switch to backup gear, the rear camera always works normally, however, after driving 10 minutes or longer the camera does not work anymore and the screen shows an exclamation mark when gear switched to backup. This happens approximately 80% times, while the other 20% times the camera would work OK even after long driving time.
The camera is wired normally with power connected to backup light. Backup light power is also connect to the head unit as trigger for rear camera video.
I was initially thinking this could be a bad camera issue, but the problem persists after installation of a new camera. So it must be the unit.
Has anyone else experienced similar problem? Any help to fix the issue is much appreciated.
Click to expand...
Click to collapse
modern car? possibly smart power management and therefore not sending enough power to the camera as it detects the reverse light not needing that much power. my vw golf does it and my friends bmw 1 series did, if its wired to a switch 12v does it do the same?
fma965 said:
modern car? possibly smart power management and therefore not sending enough power to the camera as it detects the reverse light not needing that much power. my vw golf does it and my friends bmw 1 series did, if its wired to a switch 12v does it do the same?
Click to expand...
Click to collapse
Thank you, fma965. That makes sense.
The car is 2013 Prius. I did not realize cars are getting much smarter since last few years. 12v can come down a lot to save energy. I'll try to rewire the power connection.
yves31 said:
Thank you, fma965. That makes sense.
The car is 2013 Prius. I did not realize cars are getting much smarter since last few years. 12v can come down a lot to save energy. I'll try to rewire the power connection.
Click to expand...
Click to collapse
you may need to use a relay to detect when reverse light is on then trigger camera via 12v connection (elsewhere) otherwise the camera will be always on
yves31 said:
Thank you, fma965. That makes sense.
The car is 2013 Prius. I did not realize cars are getting much smarter since last few years. 12v can come down a lot to save energy. I'll try to rewire the power connection.
Click to expand...
Click to collapse
http://www.halfords.com/workshop-to...fixings/halfords-hef554-relay-12v-30amp-4-pin is what i've used (UK)
12v cigareete lighter / battery to 1 pin, gnd to another pin, camera to the 3rd pin and the reverse light power to the 4th pin (not in that order)
fma965 said:
http://www.halfords.com/workshop-to...fixings/halfords-hef554-relay-12v-30amp-4-pin is what i've used (UK)
12v cigareete lighter / battery to 1 pin, gnd to another pin, camera to the 3rd pin and the reverse light power to the 4th pin (not in that order)
Click to expand...
Click to collapse
Thanks. I ordered a 12v/30amp/4pin relay and will install according to your instructions when it arrives.
fma965 said:
http://www.halfords.com/workshop-to...fixings/halfords-hef554-relay-12v-30amp-4-pin is what i've used (UK)
12v cigareete lighter / battery to 1 pin, gnd to another pin, camera to the 3rd pin and the reverse light power to the 4th pin (not in that order)
Click to expand...
Click to collapse
Relay came yesterday and I installed it. Pull cigarette lighter as 12v power source, wired to the relay switch, and connected rear light cable to relay as trigger.
To my surprise, the problem of video still persists! I can get rear camera video when starting the car, but loss video ~10 minutes after driving when shifting gear to reverse.
I made sure the relay wired correctly (If connected wrong, I would be either stuck in permanent rear camera video or no video after shifting to rear gear). I changed video cable as well to be sure no cable issue. Also noticed that when the problem appears, I have to wait for the head unit to shutdown completely (not to sleep mode) in order to get video back from rear camera.
Not sure if this is MCU bug. The problem started since I had the unit and MCU got updated once. I'll update one more time to see if anything changes.
yves31 said:
Relay came yesterday and I installed it. Pull cigarette lighter as 12v power source, wired to the relay switch, and connected rear light cable to relay as trigger.
To my surprise, the problem of video still persists! I can get rear camera video when starting the car, but loss video ~10 minutes after driving when shifting gear to reverse.
I made sure the relay wired correctly (If connected wrong, I would be either stuck in permanent rear camera video or no video after shifting to rear gear). I changed video cable as well to be sure no cable issue. Also noticed that when the problem appears, I have to wait for the head unit to shutdown completely (not to sleep mode) in order to get video back from rear camera.
Not sure if this is MCU bug. The problem started since I had the unit and MCU got updated once. I'll update one more time to see if anything changes.
Click to expand...
Click to collapse
What MCU manufacturer and what version? i'm on KGL crossflashed to HA
fma965 said:
What MCU manufacturer and what version? i'm on KGL crossflashed to HA
Click to expand...
Click to collapse
It's MTCD_KD_V2.41_1, and is already the latest version. I'll try to flash other manufacturer's MCU since most of them are compatible.
Prior to flashing, I should start by erasing current MCU settings and set to defaults. Do you know the best way to do so?
Edit:
MCU flashed to HA-2.52, but problem not changed. Seems to be a hardware issue, or compatibility issue with Prius.
I tried to wire rear camera to front video input. Image did show up, but I had to press a button each time when switching to back gear. I may have to live with the issue.
Strangely enough I have a 2010 Prius and yes I have a similar issue. Mine works almost always, but if I switch to reverse, then back to any gear, then back to reverse, more then 5-6 time during a minute, then I have the same as you. I'm pretty sure we have the same cause. If I reboot the unit everything is ok. Our situation is definitely different to the german cars as they have a detection circuit for failed bulb and that is the reason for their issues. Ours don't have that, at least ZVW30 Prius. I doubt it's the power or the camera. That is the unit itself and as you say probably poor hardware design.
Agree with you.
Additional note:
I had some issues after cross flashing MCU. Lost RDS in radio and iGo became very slow. Now I flash original KD MCU back and everything got back to normal. Cross flash MCU may not be always a good idea.
Hi you solved?
Mine do the same..its another car...more strange that mine works fine before i change battery...after that start with problems...
It switch but take 5 mins at least...
I rewire.put relay.put direct 12 and nothins..sometimes it works at second..bit after nothings....
Any help?
Thanks
Hello,
I had the same issue and check voltage. For an insane reason, the wire provided with the radar kit was totaly failing.. measured voltage was around 5 volts whereas camera required 12v ( i though to the USB volatge first, but, no!). This red&black wire, i don't known how, went to a huge resistance... may be pinch. I change for good power wire and throw away the bad one. My rear camera get back...
Bruno
yves31 said:
Thank you, fma965. That makes sense.
The car is 2013 Prius. I did not realize cars are getting much smarter since last few years. 12v can come down a lot to save energy. I'll try to rewire the power connection.
Click to expand...
Click to collapse
I'm looking for someone who knows how to rewire. You guys know a good place?
Anyone else got this one:
https://www.amazon.com/gp/product/B07QV67XBW/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
So far I'm loving it!
scythe000 said:
Anyone else got this one:
https://www.amazon.com/gp/product/B07QV67XBW/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
So far I'm loving it!
Click to expand...
Click to collapse
those 10" units are known to have a space between the display and the actual touch, resulting in almost a 3D / depth-like effect of the stuff onscreen (when watched from an angle, which happens usually where the driver or passenger are looking at it, no one is looking straight perpendicular to the screen). Is this also the case with this unit?
Is it known under different names? I’d love to find a thread’s talking about software options. Anyway, I don’t really notice any kind of a 3-D effect, if you look at it from an extreme angle, it does look like there is a small gap, but I definitely don’t feel it when pressing on the glass. It’s a beautiful display, a lot nicer than I would have expected.
Bluetooth seems not working in the 20190428 update.
Tried update and clean install, neither Bluetooth worked. The rest so far so good.
WangYcca said:
Bluetooth seems not working in the 20190428 update.
Tried update and clean install, neither Bluetooth worked. The rest so far so good.
Click to expand...
Click to collapse
Where are you finding the updates?
scythe000 said:
Is it known under different names? I’d love to find a thread’s talking about software options. Anyway, I don’t really notice any kind of a 3-D effect, if you look at it from an extreme angle, it does look like there is a small gap, but I definitely don’t feel it when pressing on the glass. It’s a beautiful display, a lot nicer than I would have expected.
Click to expand...
Click to collapse
yes, the display is beautiful, very good contrast and color saturation.
i've seen one installed in a car few days ago, and the first thing i noticed (was sitting in the passenger seat) was the depth effect. This effect is not present in all other units 7", 8" or 9". You could see it more in the launcher main screen (it was an Ownice), less in FM radio app or mediaplayer, navi, etc...
another thing that i didn't like was that for my car i had to cancel the airbag warning connector since the unit comes with own mask and for VW/Skoda the mask that is used for 8 or 9" units has a airbag connector. The Ownice 10.2" did not. Also an issue is the huge screen at night with white background apps which even at lowest brightness they still blow your eyes off
I may buy the dsp version soon from ali express.
I need to find out if the mcu is an MTCE first, as hal9k will be developing his rom for px6 mtce, and i wouldnt be suprised if malaysk adds it too
mindriot said:
I may buy the dsp version soon from ali express.
I need to find out if the mcu is an MTCE first, as hal9k will be developing his rom for px6 mtce, and i wouldnt be suprised if malaysk adds it too
Click to expand...
Click to collapse
Dasaita manufactures only mtce units
Enviado desde mi SM-G950F mediante Tapatalk
zerozoneice said:
yes, the display is beautiful, very good contrast and color saturation.
i've seen one installed in a car few days ago, and the first thing i noticed (was sitting in the passenger seat) was the depth effect. This effect is not present in all other units 7", 8" or 9". You could see it more in the launcher main screen (it was an Ownice), less in FM radio app or mediaplayer, navi, etc...
another thing that i didn't like was that for my car i had to cancel the airbag warning connector since the unit comes with own mask and for VW/Skoda the mask that is used for 8 or 9" units has a airbag connector. The Ownice 10.2" did not. Also an issue is the huge screen at night with white background apps which even at lowest brightness they still blow your eyes off
Click to expand...
Click to collapse
to clarify this, i suspect the ownice i saw had that 2.5D+nano screen, because my 10.2 dasaita has no depth issue whatsoever on its ips screen.
reg. airbag warning, it's just not visible, you need to take it out from the old cover together without unplugging it and just place it behind the screen. it won't give errors but it's not visible either...
zerozoneice said:
to clarify this, i suspect the ownice i saw had that 2.5D+nano screen, because my 10.2 dasaita has no depth issue whatsoever on its ips screen.
reg. airbag warning, it's just not visible, you need to take it out from the old cover together without unplugging it and just place it behind the screen. it won't give errors but it's not visible either...
Click to expand...
Click to collapse
also no issues on my IPS screen either! Great unit for what it is. Of course there are little issues here and there like all units.
I rooted mine so I could freeze apps I don't need and really clean everything up
stokedcrf said:
also no issues on my IPS screen either! Great unit for what it is. Of course there are little issues here and there like all units.
I rooted mine so I could freeze apps I don't need and really clean everything up
Click to expand...
Click to collapse
Do you have advices to root dasaita px6 ?
Thank you
Waiting infos on root aswell
What about fastboot? Can it do 2s boot? and sleep with <1mA low power?
Has anyone looked at (somehow) adding HD Radio?
My Rav4 HU has this and I've found it to be much better at receiving a signal (where I live anyway). I'm looking at a PX6 dasaita unit on Ali (also), but they all have the 6686 radio chip, where the 6688 radio chip has HD Radio included. I wonder if the 6688 couldn't be somehow retrofitted? Yes of course there would have to be pin compatibility etc, has anyone looked at that by chance?
I'm so tempted to just buy one and say scr*w the HD Radio... but sadly it's about the only thing I use the HU for! it would be hard to give that up as I almost always have the screen off
Cheers, they sure do look nice, would love to have one. Not sure if it would suit my needs though, when all said and done.
scythe000 said:
Anyone else got this one:
https://www.amazon.com/gp/product/B07QV67XBW/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
So far I'm loving it!
Click to expand...
Click to collapse
Do you also have carplay wire/wireless chip on unit? did you see if that is able to charge your iphone with carplay on?
ALso have you driven longer than 2 hrs? with this unit ? I had PX5 and it used to reset over using it continuously for 2hr or more. and also PX5 was not charging iPhone while carplay was on.
If possible could any one update me on this?
pritamjagtap said:
Do you also have carplay wire/wireless chip on unit? did you see if that is able to charge your iphone with carplay on?
ALso have you driven longer than 2 hrs? with this unit ? I had PX5 and it used to reset over using it continuously for 2hr or more. and also PX5 was not charging iPhone while carplay was on.
If possible could any one update me on this?
Click to expand...
Click to collapse
It does charge while doing CarPlay because it’s wireless so I just plug it into my charger. Works totally fine for hours on end. I’ve got an annoying bug with VLC thinking it doesn’t have delete permissions unless I manually grant it twice, but that’s unrelated. Also a bug with my iphones voice to text requires me to type a character first before it’ll pick up mic input, but I think it’s an iPhone issue.
scythe000 said:
It does charge while doing CarPlay because it’s wireless so I just plug it into my charger. Works totally fine for hours on end. I’ve got an annoying bug with VLC thinking it doesn’t have delete permissions unless I manually grant it twice, but that’s unrelated. Also a bug with my iphones voice to text requires me to type a character first before it’ll pick up mic input, but I think it’s an iPhone issue.
Click to expand...
Click to collapse
So far looks good then.
I do not find any description on link you got on amazon, specifying about wireless carplay, i tried contacting Iris he replied that there is option to get carplay wire/wireless on PX6. I ask him to send me link to product he is yet to reply.
Did you have to specify Dasaita to get you wireless carplay? or its just standard now?
pritamjagtap said:
So far looks good then.
I do not find any description on link you got on amazon, specifying about wireless carplay, i tried contacting Iris he replied that there is option to get carplay wire/wireless on PX6. I ask him to send me link to product he is yet to reply.
Did you have to specify Dasaita to get you wireless carplay? or its just standard now?
Click to expand...
Click to collapse
I could be mistaken, but I think it's wireless. I hadn't asked for anything in particular, so it might be standard now.
I have dasaita - car play works on wire plus you have to have additional box/device ( can buy it in bundle with head unit). When iPhone connected through it - CarPlay works seamlessly and your phone is charging.
One more thing - you need to have application for CarPlay too.
Regards. k
Sent from my iPhone using Tapatalk
scythe000 said:
I could be mistaken, but I think it's wireless. I hadn't asked for anything in particular, so it might be standard now.
Click to expand...
Click to collapse
Would you mind creating a video and share it over youtube? about carplay ? I am interested to see it.(& I believe most of us here wants to)
I have posted mine about blackout screen a while ago.
https://youtu.be/1qTh_JQggm8
https://youtu.be/1qTh_JQggm8