Anyone noticed if you sending over say music and just leave the phone to turn display off and enter sleep, the copying stops responding. but if you keep the device awake the file transfer finishes fine? Do I have something killing the process when screen off?
Nope still doing it
Not entirely sure but could be doze doing it. What app are you using to copy?
m3lover1 said:
Not entirely sure but could be doze doing it. What app are you using to copy?
Click to expand...
Click to collapse
Using Windows 10 pc connected by USB to phone. I think I found the issue, it might be my front USB 3.0 ports.
I connected at the back to Intel USB 3.0 ports and it didn't crash. Will test more tomorrow.
Sent from my HTC 10 using XDA-Developers mobile app
Can confirm it was issue with my USB Port.
Related
When i connect my G2 phone to the computer it use to have a notification to tell me it was connected to a computer and let me turn on usb storage mode. When i plug it in to my computer it does nothing just sits there charging like it was plugged in to a wall charger no option to go to usb drive mode. I am using CryogenMod 6.1.1 any ideas?
I tried 2 different cables and computers...
You might not have the proper drivers installed on your computer.
Sent from my HTC Vision using XDA App
joemm said:
You might not have the proper drivers installed on your computer.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
I don't think its a driver issue because it comes up as a removable disk no matter what computer i am on. It seems like it's on the phones side there is no notification like there used to be. This all started today. was working perfectly before. I have not clue what could of done this I haven't made any drastic changes on my phone or anything.
I don't know what happen i restored it back to another restore point i had it started working again! i don't know how or what happen.
enp82003 said:
When i connect my G2 phone to the computer it use to have a notification to tell me it was connected to a computer and let me turn on usb storage mode. When i plug it in to my computer it does nothing just sits there charging like it was plugged in to a wall charger no option to go to usb drive mode. I am using CryogenMod 6.1.1 any ideas?
I tried 2 different cables and computers...
Click to expand...
Click to collapse
You've probably got usb debugging enabled. Disconnect your phone from the computer, disable usb debugging and then connect it again.
EdKeys said:
You've probably got usb debugging enabled. Disconnect your phone from the computer, disable usb debugging and then connect it again.
Click to expand...
Click to collapse
The phone was always on debugging mode, and I still always got the USB connected notification. I think it was an Ap I downloaded that messed with the startup programs. I am not completely sure it is that but was the only major change in my phone since this started happening. So IDK glad its resolved through the restore and backup.
HELP!!!
I don't know what goes wrong...in recent days, the screen auto turn itself back on even I press the right side button to close it... I don't know what to do now.. is there some app run itself to turn the screen on??? it's very annoying.. how can I found out the root cause for it and fix it???
Thanks a lot!!!
Your USB port is probably messed up and your screen is turning on because the phone thinks its charging.
Clean out your port and make sure the connector is straight.
Sent from my Galaxy Nexus using xda premium
You mean physically clean the USB port on the bottom of the phone? But the screen auto on issue happens even when my phone is not plugged in USB.... Thanks
minidisc_md said:
You mean physically clean the USB port on the bottom of the phone? But the screen auto on issue happens even when my phone is not plugged in USB.... Thanks
Click to expand...
Click to collapse
El Daddy suspects the USB port is somehow dirty enough to make the phone *think* it's being charged, wich causes it to turn on the screen. You could test this by using the Tasker app: make it write to a logfile or give a toast/notification on the state power (any). If it logs a power source while there is no cable connected: tada.
I'm not sure if there is a permission in Android that allows an app to turn on the screen. I doubt it however.
Human interesting insight... is the application called "tanker"? Is there any free application can do this log?
I once thought there are some app that used my GPS or running in background to periodically turn my screen on....
It's called Tasker. You can download a trial version (7 days) here: http://tasker.dinglisch.net/download.html
it's hard to say how many applications can do this. you'd better list all you applications here.
Could copy a 12mb file but not a 1gb file to my phone from my mac randomly using android file transfer. I booted into windows and am still getting the same problem. I was using a usb hub but tried straight to computer but still no luck. Any ideas, it was working before?
I noticed that my mac would stop copying if my phone screen turned off. Try keeping it awake the whole time?!
thecitywelivein said:
I noticed that my mac would stop copying if my phone screen turned off. Try keeping it awake the whole time?!
Click to expand...
Click to collapse
Tried that with no luck, I also tried restarting my computer and restarting my phone with still no luck...
I noticed my mac saying files didn't copy using AFT but when I looked at the folder on my phone, the files were there.
Sent from my HTC6500LVW using Tapatalk
Use adb push. Has to do with the internal "emulated" sd card.
Sent from my Oney Bone.
Switch Off your Power Saver and turn off all Battery Saver App,
seems like the phone try to killing task or try to lock the device in background in this mode,
always have that issue (unable to copy) when my saver is on...
Bought the 'official' usb to usb3 lead from the Play store. When I tried connecting to my Macbook Pro the Android File Transfer can't find the Nexus. I thought it might be the USB Debugging needs enabling so I did that. Nope. Maybe the Android File Transfer needed updating so updated it. No joy. I'm a bit lost now, can anyone shed any light on my problem?
Mine would say something about the screen being locked even though it wasn't.. When you plug it in, pull down the notification drawer and tap the Choose More USB Options, or whatever it says. Make sure File Transfer is selected and try again.. took mine a few times of switching between FTP and Charging but it works with my Mac now
tpayne2345 said:
Mine would say something about the screen being locked even though it wasn't.. When you plug it in, pull down the notification drawer and tap the Choose More USB Options, or whatever it says. Make sure File Transfer is selected and try again.. took mine a few times of switching between FTP and Charging but it works with my Mac now
Click to expand...
Click to collapse
Ok, thanks, I'll try switching between MTP and charging a few times like that.
I have no trouble. Have a 2012 MBP using El Capitan.
Sent from my Nexus 5X using Tapatalk
tpayne2345 said:
Mine would say something about the screen being locked even though it wasn't.. When you plug it in, pull down the notification drawer and tap the Choose More USB Options, or whatever it says. Make sure File Transfer is selected and try again.. took mine a few times of switching between FTP and Charging but it works with my Mac now
Click to expand...
Click to collapse
More thanks. I had to switch it between charging and MTP 5 times to get it but it worked in the end.
Is there any way to making the MTP setting sticky for trusted devices? When you connect with usb debugging, it asks you to verify and save the device. If something like that was possible with this setting, you could have the security of not auto enabling when charging from random devices but the convenience when connected to your own remembered computer.
This solved my problem!
tpayne2345 said:
Mine would say something about the screen being locked even though it wasn't.. When you plug it in, pull down the notification drawer and tap the Choose More USB Options, or whatever it says. Make sure File Transfer is selected and try again.. took mine a few times of switching between FTP and Charging but it works with my Mac now
Click to expand...
Click to collapse
This was also my problem. Thank you tpayne! This solved my problem!
I recently installed Serfify app which cover accidental damage protection in India for a period of 1 year from the date of purchase.
While using this app I ran Diagnose my device . Everything worked fine except the charging port. When I connect the charging port the app doesn't provide a a tick mark. But the device is charging perfectly. Is this a bug with the app or any problem with my one plus 3. Anyone facing similar issue?
As u can see device is charging but app not detecting it.
Don't worry, I've the same problem. It's probably a bug in the app.
It's a bug.
Seems to be a bug with the app. I just tried it out and it shows the same result on my device too. Don't worry about it.
avin.dj.raj said:
As u can see device is charging but app not detecting it.
Click to expand...
Click to collapse
just connect it with pc. it will show tick mark.
it dint say connect your charger. it clearly has usb port mark and it demands u to connect to pc. ITS NOT A BUG
Thanks a lot