Develop Bugs

[Q] Help!! a100 Blackscreen

i have a a100 with the latest flexreaper rom installed and im stuck with a pretty serious issue:
a couple of days ago the tab was acting real slow and sluggish and getting bad battery life didnt think nothing of it so i just rebooted a couple times and left it alone . all was good untill the battery hit 10% and i plugged it up using the factory ac adapter. the next day (maybe 6-7 hours later) i went to turn it on and nothing no vibrate no screen flash nothing; other than the power button turning blue as i pressed it and it would stay on for a couple hours but still no other response from the tablet.
im at my wits end on what could be wrong and now i got my wife with her foot on my neck till i get it fixed. can anyone help me?
ive tried to do a hard reset with the reset button tried to boot into recovery /bootloader no dice
(also my home button flashed a couple time i pressed the power button) dont know if its relevant but wanna get as much info out as possible

wondering if anyone can help me...

frenize said:
wondering if anyone can help me...
Click to expand...
Click to collapse
It may take awhile for someone to see this and form something to try, random bricking for no reason is rare, its almost always some error by the user. However have you attempted adb connection to it? Leave it powered off, connect to the PC you used to unlock the boot loader then power on. Does the PC make the USB connect sound? Does the Acer vibrate? Did the home key blink again?
It really sounds like your boot partition is wrecked which wouldn't normally happen outside of flashing. If boot loader is trash then it won't know what to do and just sit there. No recovery or anything else.
Tapatalked from my Galaxy S II.

pio_masaki said:
It may take awhile for someone to see this and form something to try, random bricking for no reason is rare, its almost always some error by the user. However have you attempted adb connection to it? Leave it powered off, connect to the PC you used to unlock the boot loader then power on. Does the PC make the USB connect sound? Does the Acer vibrate? Did the home key blink again?
It really sounds like your boot partition is wrecked which wouldn't normally happen outside of flashing. If boot loader is trash then it won't know what to do and just sit there. No recovery or anything else.
Tapatalked from my Galaxy S II.
Click to expand...
Click to collapse
it made something like the connect sound but instead of the regular duh doom sound it did a dadadoom (kinda hard to describe the sound) but it was faster than ive ever heard the connect sound before which is weird. the tab didnt vibrate and it seems the home button blinks when the tab is dead and needs recharged

frenize said:
it made something like the connect sound but instead of the regular duh doom sound it did a dadadoom (kinda hard to describe the sound) but it was faster than ive ever heard the connect sound before which is weird. the tab didnt vibrate and it seems the home button blinks when the tab is dead and needs recharged
Click to expand...
Click to collapse
Yeah I know that sound it means USB connected but error for some reason. Its been shown if this thing dies all the way down it wont read the battery correctly and probably needs to be sent in. Before that I personally would unplug it open it up and remove the battery for awhile, maybe an hour then put it back and plug it in. But thats me, not the advice I'm giving. If you have warantee on it use that.
The batteries on a lot of devices and laptops etc have something of a fail safe, if the voltage drops below a certain point it trips to prevent cell damage, however it renders the battery useless.
I haven't searched out much past that if a reset is possible by us, but it seems the pack is trash after or needs sent in.
Since this is a sealed unit you void warranty opening it (well unlocking the boot loader did too) so you can't send it in for repairs without paying for it.
I hope someone can jump in and help figure this out, and prove me wrong.
Tapatalked from my Galaxy S II.

Weird, This exact same thing happened to me. Used it in the morning and now after work it won't turn on. I had already tried disconnecting the battery, but hadn't thought to leave it disconnected for an hour. My tablet has been running the leaked ICS since it came out and The last factory reset it had was about a month ago. It was working fine up until this. The power button seems to be responding correctly, the issue is that after the LEDs light up, there is no vibration or display. I hope someone can help us with this issue.
EDIT:
It won't connect in ADB mode. It will only appear on my computer as an APX device and since there is no vibration I am unable to boot into fastboot. Any help or suggestions? All the threads I have found have involved booting into fastboot.

i am also having this problem. i set ti backup last night to save to box i turned it on this morning it.worked set it on the charger came back to a frozen screen. I turned it off now just a black screen it turns on or the home button dose but nothing comes up on the screen

same thing here.
max69power said:
i am also having this problem. i set ti backup last night to save to box i turned it on this morning it.worked set it on the charger came back to a frozen screen. I turned it off now just a black screen it turns on or the home button dose but nothing comes up on the screen
Click to expand...
Click to collapse
I have been using ICS the leaked one, and last night I was goint to check my email and it did not turn on, I though the battery died. I plugged to the charger and this morning I tried to turning it on but it failed. I did the reset pin but nothing. I connected to the computer and it was recognized as a APX device and installed a driver ACER Picasso USB recover but i cant access anything. I am a nob. Thanks

A100 blackscreen
i am also having this problem. last night. just a black screen it turns on or the home button dose but nothing comes up on the screen. :crying: Help!!!!!!

Has anyone tried holding the power button for a while? Laptops do this too, if someone felt ventures, try taking the battery out and hold the power button. No promises, might work.
sent from my ICONia

same here
Having the exactly same issue, here...
I also tried to hit the hardware reset button and it does not help.

If the screen is blank while powered on its in failsafe mode, in other words is bricked, has to go to Acer.
Tapatalked from my Galaxy S II.

This just happened to me a few weeks ago as well. If you are still under warranty send it in to Acer, thats what I did. I just got an email saying they had fixed it and were sending it back for free!!
At the time I was on the 9/02 JB build. I wonder if this issue is caused by faulty hardware or if it is an issue that was made by rooting and unlocking it? I don't know enough about this stuff to answer that though, but it does make me think whether I should root/unlock it when I get it back or leave it stock.
Also thanks Pio_masaki for helping me a few weeks back wasn't sure if I was even going to send it in until you said they most likely won't be able to tell.

I highly doubt they even CARE when sending these in. They will void for physical damage most likely.

tshm55 said:
Having the exactly same issue, here...
I also tried to hit the hardware reset button and it does not help.
Click to expand...
Click to collapse
Ohmygod,
Same here, but it's 3 years ago. Sorry for digging the topic. Still no hope? I still keep the tablet and have just buy another refurbished mainboard to replace but still no vibrate and blacksreen still there.

a very strange hard brick

Hi!
First of all i got AOKP + Franco kernel for 2w without any problem and I didn't change any option since last week.
This morning i rebooted it, it switched off and it didn't start again.
I cannot switch one my nexus again since then. I have always a black screen, also if I try to enter in download mode or in the recovery.
I tried to connect to my computer and smt times my laptop see a omap4400 (i'm not sure about the name) but after few second it disappears.
Tomorrow I'm going to the service center... But I have a big doubt:
What the hell happened this morning?
Thanks

Remove the battery for 5 minutes and try again.
If that doesn't work,
Follow this guide:
1. Download the zip file from http://forum.gsmhosting.com/vbb/f634...eeeee-1465412/, created by Legija
2. Extract zip to whatever location you're comfortable with (I used Android directory)
3. Open up Device Manager (Hold down Windows Key, press R, the type in devmgmt.msc and press OK)
4. Go to actions menu, select Add Legacy Hardware
5. Choose install manually, then have disk. Browse to where you extracted the zip, select the 'inf' file in usb_drv_windows
6. Choose OMAP, you'll get a popup if on Win 7, continue anyway (driver not signed)
7. Once completed with driver, pull battery out of phone, then plug it into USB
8. Double click omap4460_tuna_hs_pro.bat to start the process
9. Once completed, unplug from USB, put battery back in, and power-up!
10. Extra step - depending on what's been done, it may 'brick' again - suggest to do a restore or a wipe reinstall afterwards to be certain (mine bricked again next reboot)
Click to expand...
Click to collapse

biscuitownz said:
Remove the battery for 5 minutes and try again.
If that doesn't work,
Follow this guide:
Click to expand...
Click to collapse
This, if OP can't reach fastboot.
Sent from my i9250

I'm having the exact same problem. I saw my phone at maybe 10% battery in the AM, said screw it and let it die, woke up this morning and plugged the phone in and nothing. No LED light, black screen, completely unresponsive. I've tried every trick in the book, and the only one that seemed to work marginally even was using a different battery, which got my phone to boot to the encryption screen, but then shut off again. It did that twice, and now both batteries are useless.
I used Legija's program to try and bring some life back to my gnex, even though it's not the international version, just in hopes of getting some of my data back (I have already started the replacement process with Verizon since the phone was insured), but I got no luck there either.
It's extremely disappointing and annoying to me that this phone survived all sorts of ROM installations (I was also using AOKP on 4.1 if someone wants to start making connections), reformatting, tweaking, almost every setting on that phone was modified by me.
Not only that but almost any software or hardware problem I did run into I could solve in maybe an hour, but I let my charge run out and the phone just up and bricks itself? Now, that's just bull****... I would be very curious as to an explanation as to WHY on earth this would happen. Very confusing.
Not to hijack the thread, but my interest here is not restoring the phone to working condition but just seeing if I can pull my data off of it. I wouldn't even be posting here had I been able to have an SD card with my gnex, which I figured was unnecessary at the time I bought it since I knew the space on their was enough for me already, and the added branding of "Nexus" brand which had me under the impression it was maybe stable enough by itself. Not a mistake I'll make again..
Is it at all possible to get the data off of my phone at this point? At least partially? I believe encryption makes it impossible but I'm rather stubborn. Any help would be greatly appreciated..

owlieowl said:
I'm having the exact same problem. I saw my phone at maybe 10% battery in the AM, said screw it and let it die, woke up this morning and plugged the phone in and nothing. No LED light, black screen, completely unresponsive. I've tried every trick in the book, and the only one that seemed to work marginally even was using a different battery, which got my phone to boot to the encryption screen, but then shut off again. It did that twice, and now both batteries are useless.
I used Legija's program to try and bring some life back to my gnex, even though it's not the international version, just in hopes of getting some of my data back (I have already started the replacement process with Verizon since the phone was insured), but I got no luck there either.
It's extremely disappointing and annoying to me that this phone survived all sorts of ROM installations (I was also using AOKP on 4.1 if someone wants to start making connections), reformatting, tweaking, almost every setting on that phone was modified by me.
Not only that but almost any software or hardware problem I did run into I could solve in maybe an hour, but I let my charge run out and the phone just up and bricks itself? Now, that's just bull****...
Not to hijack the thread, but my interest here is not restoring the phone to working condition but just seeing if I can pull my data off of it. I wouldn't even be posting here had I been able to have an SD card with my gnex, which I figured was unnecessary at the time I bought it since I knew the space on their was enough for me already, and the added branding of "Nexus" brand which had me under the impression it was maybe stable enough by itself. Not a mistake I'll make again..
Is it at all possible to get the data off of my phone at this point? At least partially? I believe encryption makes it impossible but I'm rather stubborn. Any help would be greatly appreciated..
Click to expand...
Click to collapse
So just to be clear... You've been able to get it to boot all the way up to the encryption screen, right? If so you should be able to get into fastboot (Holding down BOTH volume rockers and the power key.) From there you could relock/unlock the bootloader to do a full factory wipe which might solve your boot issue.
As far as the data loss from the wipe, you could then try this: http://forum.xda-developers.com/showthread.php?t=1994705

TomBall718 said:
So just to be clear... You've been able to get it to boot all the way up to the encryption screen, right? If so you should be able to get into fastboot (Holding down BOTH volume rockers and the power key.) From there you could relock/unlock the bootloader to do a full factory wipe which might solve your boot issue.
As far as the data loss from the wipe, you could then try this: http://forum.xda-developers.com/showthread.php?t=1994705
Click to expand...
Click to collapse
I was able to get it to the encryption screen with my old battery that had a little bit of charge left in it twice, but it shut itself down on me both times. So now both batteries are useless.. I took it to the Verizon store hoping they would maybe try one of their batteries, but they just called customer service and told me they're just going to replace it at this point.
I have a feeling the charging mechanism is somehow damaged, because when I did get it to the encryption screen I had it plugged into a wall outlet and it wasn't charging at all. So, I can't turn the phone on whatsoever anymore.. if I could turn it on I could solve this problem... but it simply refuses to boot. The closest I came to interfacing with it was the OMAP Flash script, which did work, but didn't fix the problem.
So maybe if I could get the phone working enough to use ADB with it I could get my data back, but not even that seems possible..

owlieowl said:
I was able to get it to the encryption screen with my old battery that had a little bit of charge left in it twice, but it shut itself down on me both times. So now both batteries are useless.. I took it to the Verizon store hoping they would maybe try one of their batteries, but they just called customer service and told me they're just going to replace it at this point.
I have a feeling the charging mechanism is somehow damaged, because when I did get it to the encryption screen I had it plugged into a wall outlet and it wasn't charging at all. So, I can't turn the phone on whatsoever anymore.. if I could turn it on I could solve this problem... but it simply refuses to boot. The closest I came to interfacing with it was the OMAP Flash script, which did work, but didn't fix the problem.
So maybe if I could get the phone working enough to use ADB with it I could get my data back, but not even that seems possible..
Click to expand...
Click to collapse
If the phone isn't charging then there's something wrong with the USB port. One way to test that would be to use a battery charger. Also, try a different cable. I've had issues with a few different cables that for whatever reason started to not fit properly in the phone.
If you're USB port has gone bad then you'll need to either A) Always use an external battery charger. B) Get a replacement. C) Fix it yourself (Good guide here: http://www.ifixit.com/Guide/Repairi...+LTE)+Micro+USB+Charge+Port+&+Main+Mic/9641/1 )

Repair bricked phone

Hi everybody!
I have an almost 2 years old DHD which I think is completely bricked. It was working for approximately one years perfectly and then suddenly it stopped working. Whenever I tried to turn it on, it only vibrated once and did nothing more. Sometimes it turned on and these working periods were enough to restore to stock condition (It was rooted and had Eng S-OFF before.). I had brought it to service and they said they was not going to repair it as the device got water damaged. I'm pretty sure it was not! After a few weeks, it started working again. I was using it for 3 months then it bricked again and it's the situation today as well.
Previous week I looked into the development thread and saw all of these new amazing roms. So I took my DHD to see if it's working or not. The situation is the same. Everytime I power it on, the phone only vibrates once and nothing happens. I'm not able to get into hboot mode. At some very rare occassions the phone turns on and works flawlessly till reboot. When I connect it with USB, the computer doesn't recognize it. Battery is charged, I even tried another battery.
Does anybody know what happens with the phone? I'm open to any possible solutions to try. Please don't suggest to bring it to service or repair it, because I have another phone, just want to try to recover it and ask your ideas about the problem.
Thanks in advance!
Greetings,
Adam

So you say you cant enter in fastboot or recovery?

Since it's intermittent, my guess is it is a hardware problem. Some kind of bad contact/loose connection. Make sure everything looks good on your battery door and the battery contacts inside the phone.

paescheh said:
So you say you cant enter in fastboot or recovery?
Click to expand...
Click to collapse
I cannot enter into hboot mode. Didn't try recovery, but assume it's the same.
waterbox said:
Since it's intermittent, my guess is it is a hardware problem. Some kind of bad contact/loose connection. Make sure everything looks good on your battery door and the battery contacts inside the phone.
Click to expand...
Click to collapse
I also think it's a hardware problem. Will take a more careful look at the battery.
Sent from my CM10-powered GT-I9103

need help
im having trouble finding post option on page.i recently rooted my phone.all was well until i used font app sms pro and emoji plug in.i also forgot o disable auo update.worked for 10 minutes then apps wouldnt load.whil attempting to uninstall via recovery...since no other options worked...i wiped my system....now recovery says E:no os...please help...im using vm htc 1 v cdma...

goofed again said:
im having trouble finding post option on page.i recently rooted my phone.all was well until i used font app sms pro and emoji plug in.i also forgot o disable auo update.worked for 10 minutes then apps wouldnt load.whil attempting to uninstall via recovery...since no other options worked...i wiped my system....now recovery says E:no os...please help...im using vm htc 1 v cdma...
Click to expand...
Click to collapse
Wrong sub forum buddy, post in the One V Forum.

Its possible that there isn't "water damage", but there could be moisture getting into the phone causing it to act erratic. To cancel out that possibility, submerge it in a closed container full of rice for a few days
Sent from a satellite

Freezing at initial android set up?

I just got my brand new OP3, opened it and turned it on to start setting it up, it freezes inside the android set up and then restarts itself after a few seconds of being frozen.
Any solutions? I really don't want to return it, I find it a bit stupid it doesn't even work out of the box

Might be a dud. They happen. RMA it.

LaysDarren said:
I just got my brand new OP3, opened it and turned it on to start setting it up, it freezes inside the android set up and then restarts itself after a few seconds of being frozen.
Any solutions? I really don't want to return it, I find it a bit stupid it doesn't even work out of the box
Click to expand...
Click to collapse
I don't own this phone, but this happened to me with a Nexus, I turned it off, was able to get into recovery mode with button combinations, then I factory reset, cleared cache, and rebooted, it was fine.
I hope you can give it a try
Sent from my XT1097 using XDA-Developers mobile app

mr mystery said:
Might be a dud. They happen. RMA it.
Click to expand...
Click to collapse
markdexter said:
I don't own this phone, but this happened to me with a Nexus, I turned it off, was able to get into recovery mode with button combinations, then I factory reset, cleared cache, and rebooted, it was fine.
I hope you can give it a try
Click to expand...
Click to collapse
Tried doing the Factory reset thing, no luck. Talked to OP support and the guy told me to submit a ticket with my issues, and that a "level 2 technician" would help me.
So I got home and plugged it into my PC, turns out the phone doesn't freeze when plugged in via USB. But on the included charger, and without being plugged into anything, it freezes and reboots itself in a continuous loop.

Keep us informed I'd like to hear what the problem/solution is

Hello, i have the same issue, did u find the solution ?

tenzeu said:
Hello, i have the same issue, did u find the solution ?
Click to expand...
Click to collapse
I also had my Oneplus 3 in a bootloop and freezing while showing either the 1+ square or the rotating red dots.
After I tried to get it repaired by talking with support and had been using my old phone for a few days and reflashing the ROM and recovery many times. I got it working again (ish) now it only freezes ones a day.
Support is a pain, I'm waiting for a level 2 techician for almost a week now.
So I any of you know a solution or have a confirmation that it is a hardware failure, I think we all would like to hear about it.

Is my 1+3 dead!?

Hi everyone,
I'm experiencing pretty silly situation with my phone.
So the story begins here:
I was surfing the web while listening to music in the bus when suddenly my oneplus3 randomly turned off and I couldn't turn it back on. (I was on something around 15% on battery so it's not a low battery problem) I tried to turn it on several times and after holding the power button for like 10secs it turned on, and after pressing the power button again (because I needed to get past unlocked bootloader screen and dm-verity) I saw a boot screen. The capacitive button leds turned on and after 3 secs it turned off again, so I started worrying... After a while I tried to access the recovery, but no luck at all. It powers it self off after bootscreen. So I started to research. Tried to flash the entire OS, partritions with msmdownload tool. After several unsuccessful flashes (firehosewritedata failed sometimes while writing userimg or system.img or boot.img) I did get the download complete green text message, and after successful flash, the white LED turned on, even the phone was not plugged in USB or charger and turned off. The screen is completely black and the white led just flashes constantly without blinking or anything. I could only turn the led off by pressing the power button for another 10 secs. And after turning the phone off, problem still remains. After oneplus logo phone shuts down...
I can access bootloader.
And after flashing everything should be on stock, because now I only got screen only about bootloader, no dm-verity..
And of course - I still cannot access the recovery.
p.s. I tried to do the power cycle (as the tech support told me) but still no luck at all.

did u tried the full msmdownload tool (1gb) or the 55mb version ?

Mukthar. said:
did u tried the full msmdownload tool (1gb) or the 55mb version ?
Click to expand...
Click to collapse
1GB version

djemm1996 said:
1GB version
Click to expand...
Click to collapse
Are you sure that you did it right? Did your phone show up as mentioned in the instructions?

Puddi_Puddin said:
Are you sure that you did it right? Did your phone show up as mentioned in the instructions?
Click to expand...
Click to collapse
Of course. Everything is done right. I also get that green "download complete" message.
p.s I also opened the phone. water indicators are fine and no major defects what can i see by eye... All connectors are good as well.

Puddi_Puddin said:
Are you sure that you did it right? Did your phone show up as mentioned in the instructions?
Click to expand...
Click to collapse
And yes, phone was connected right. :good: installed drivers with test mode on Win10 and got Snapdragon device in COM devices. As well the MsmDownload tool shows up my device in port #20

Any ideas?

djemm1996 said:
Any ideas?
Click to expand...
Click to collapse
Follow method 2 from the Hard Brick guide by Naman Bhalla and try two or three times.
Sometimes it takes more than once for restoration.

Since you opened the phone, i think your warranty is gone now.
If the msmdownloadtool didnt help you, there is nothing you can do i think.

try to flash again, and if it still maybe something short inside.
if you have disassembly your phone, try disconnecting various flex cable like camera, sim slot etc that connect to the mainboard, that doesn't prevent device from powered on, then try to turning it on.
if it still, check your mainboard, if you don't know how, send it back.

AcidNoteZ said:
Since you opened the phone, i think your warranty is gone now.
If the msmdownloadtool didnt help you, there is nothing you can do i think.
Click to expand...
Click to collapse
Is ir really gone? There is a still warranty void sticker on the screw there, but of course it's possible to see by eye that the phone has been opened.
I have an appointment with Level2 tech support @oneplus, they are going to remotely flash the entire OS, but do you think they are using pretty similar technique as the msmdownloadtool?

djemm1996 said:
Is ir really gone? There is a still warranty void sticker on the screw there, but of course it's possible to see by eye that the phone has been opened.
I have an appointment with Level2 tech support @oneplus, they are going to remotely flash the entire OS, but do you think they are using pretty similar technique as the msmdownloadtool?
Click to expand...
Click to collapse
They are doing the same thing like you did.
I already had a session since i thought they are going to do something "special"
You can try the remote session but im afraid that wont help you if you already did it multiple times.

What about battery? Charged?

drmuruga said:
What about battery? Charged?
Click to expand...
Click to collapse
Yes battery is charged of course. It's just doint the same thing. Turns on, after a while when bootscreen comes it just turns off and white notification led appears, after that nothing.

I tried to flash it with tool using method 2 for like 15 times with "download complete" messages, but still no luck at all. Tried to erase partritions with fastboot, flashing just only recovery, modded recovery etc. but I still cannot access the recovery nor system. I just don't get it why the phone does not boot into recovery if I flash it or boot it straight away, It just only turns off and that's it. nothing more. Only black screen and white led lighting all the time (after a while the phone turns warm).
I have read all the MsmDownloadTool thread in "Mega Unbrick thread" and saw that few people have experienced the very same situation as me, so I was wondering if there is any fix for this? It's so strange that I was just surfing the Web and it just turned off by it self with like static image for miliseconds and after that just black screen.
There should be any fix. I guess that it's just a partition error...

Ok, not good news. I had a little remote session before a while. They says it's already a hardware problem.

AcidNoteZ said:
Since you opened the phone, i think your warranty is gone now.
If the msmdownloadtool didnt help you, there is nothing you can do i think.
Click to expand...
Click to collapse
Pfffft you think manufacturers notice when you take apart phones? Hell I took apart my Xperia Z2 because it was having problems and then glued it back together with cyanoacrylate hahahaha (worst thing to do but wtv) and no one noticed though it was seemless and everything looked perfect

Guys, I've got something for you! Not really the same thing as Naman.
p.s. not saying its original hehehehe keep safe

man i got a very similiar problem but my op3 has a black screen i was also on low battery around 5-15% when my phone went off after i was in twrp

Actually I was on twrp too! Also I have recently noticed that recovery loading speed was far too long than normal one. I'm talking for something about 5-7 minutes after reboot into twrp. So, who knows what did happen. Just made an RMA request. Will see how it goes.
Anyway, I was on stock 7.1.1 and it's just rooted with custom recovery and that's it! Nothing more! Is that just a factory failure or maybe it's caused by drops i have had? Nothing serious for a 4-5 times for a half year. Of course I have used it even in winter when the snowflakes are coming down from the sky and little rain. Btw, these liquid indicators are white, so all safe. ::laugh:
A
makadama said:
man i got a very similiar problem but my op3 has a black screen i was also on low battery around 5-15% when my phone went off after i was in twrp
Click to expand...
Click to collapse