Develop Bugs

My Universal Dead . Please help...

Hi,
My Universal fail to power on.
It do not enter boot loader with light + power + reset and show no signs of life. Batteries are both new and tested in other working units.
When connected to USB, PC reports "USB device not recognised"
I had ROMS flashed but failed at 99%. When reset the units did not power on or showed any signs of life.
It had been working fine up until the unsucssesful flash update.
I would like to be able to use it for work .
Please either post replies here or email me [email protected]
Your time and efforts will be greatly appreciated.
Regards,
quou

quou2006 said:
Hi,
My Universal fail to power on.
It do not enter boot loader with light + power + reset and show no signs of life. Batteries are both new and tested in other working units.
When connected to USB, PC reports "USB device not recognised"
I had ROMS flashed but failed at 99%. When reset the units did not power on or showed any signs of life.
It had been working fine up until the unsucssesful flash update.
I would like to be able to use it for work .
Please either post replies here or email me [email protected]
Your time and efforts will be greatly appreciated.
Regards,
quou
Click to expand...
Click to collapse
Please try to enter the bootloader mode in a bright room as it is very difficult to see in poorly lit environment. Till you enter the bootloader mode your device will not be recognised. Perhaps one of the three keys is getting released..the light button is the usual culprit. Once you are in the bootloader you can reflash.

Thank d_ranade for your answer.
I am sure the screen is 'all black' and I've tried to press the buttons several times.
I think the main problem now is how to enter the Bootloader.

I sometimes find it takes several goes to get into Bootloader mode. If not, have you tried a hard reset?

I've tried whatever i can do. Hard reset is useless too.

quou2006 said:
Hi,
My Universal fail to power on.
It do not enter boot loader with light + power + reset and show no signs of life. Batteries are both new and tested in other working units.
When connected to USB, PC reports "USB device not recognised"
I had ROMS flashed but failed at 99%. When reset the units did not power on or showed any signs of life.
It had been working fine up until the unsucssesful flash update.
I would like to be able to use it for work .
Please either post replies here or email me [email protected]
Your time and efforts will be greatly appreciated.
Regards,
quou
Click to expand...
Click to collapse
I have sent you a pm, it should help you.
-Jwrightmcps

Thank Jwrightmcps for your help, but i can not enter the Bootloader ,so can not use mtty to do more.

Unable to start/see bootloader
I seem to have the same problem with my upgraded universal which was working fine for about ten days. Then I installed TomTom on it and again it was all working that evening.
Then, when I turned it on the screen went blank (white), so I re-flashed it, but, part way through the screen went black, so I left it connected for further hour and nothing. I have since been unable to get it to do anything, it is not recognised by activesynch, it will not charge (either from the mains or the USB on either of the batteries) nor will it turn on or respond in any way.
I have unset ‘allow usb connections’. I have tried solidly for +/-10 minutes doing the backlight + on/off button and reset bit - repeatedly, with my wife helping to ensure all buttons were being pressed. All I got was a message from MicroSoft telling me that ‘One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it’. The only positive thing is that every time I do it and depress the reset, the red LED flashes (provided I leave the USB cable in) but at no point have either of us been able to see any writing on the screen.
Any guidance (apart from where to take it for recycling) would be welcome…

It happened to me several times too. Even in the old ROMS. But had learned many things out of it. I removed the battery. Wait for several seconds or maybe minute before placing it back. And after placing it back wait again for some time before doing the "power + light + reset" (bootloader). At some point when I am in the bootloader mode already and reflashing, connected to the PC already, the screen went blank again. So I'm sure that something went wrong again. I repeated the procedure again (removing battery, placing it back etc...) and the reflashing continued. It takes patience (maybe).
After having experienced this so many times, I'm beginning to assume that it is not because the battery is "bad" or there is a problem on the ROM being reflashed. It is on how it (the battery) is connected to the unit. The reason why it does not turn on, charge even if connected to the charger, does not hard reset, does not react to anything... I just don't know.
One thing more, the procedure I said above sometimes does not work at once. But at least I managed to "resurrect" my device several times.
This I am sure, it is not in the ROM that is being flashed or the update...
Hope this helps,
Lelen

lelen, Thanks for your assistance. I tried last night, but it still could not enter the bootloader mode...

I have the same problem =( and i don't know what to do, someone told me that i have to change motherbord to resolve this problem, i hope there are some other solutions.

Dead Uni
I too had this problem. With the device not responding at all and not able to enter bootloader stops mtty from working.
Only way i could get it to work was to take it to an O2 shop to send it away for repair (luckily the O2 XDA range has a 2 year warranty and because its completely dead they cant tell the OS has been modified).
Unfortunatly like the previous post i think it can only be fixed by replacing the mainboard.

Hi all, i found this thread http://forum.xda-developers.com/showthread.php?t=291097&page=6
so many people have the same problem , and nobody found a solution? i can't believe that on all this universals died motherboard, and there is no way to fix it with some special cable or some programm.

yes,i post the last reply of the thread you mentioned above, but nobody can resolve it.

I recommend you remove the battery and leave it over night. Put the battery back on, ensure it is properly mouted and try booting it.
It worked for some, no idea why though. I'm actually suspecting a bad battery mounting, which results in the motherboard unable to detect a battery is iserted, thus refusing to boot.

finally managed to get mine fixed, mine was out of warranty too and sent it off to carphone warehouse express service, took 3 weeks but was fixed with a standard chargeable repair charge of £40

I have a somewhat similar problem but not from upgrading. I accidentally dropped the device after a successful upgrade and the screen got damaged. Someone picked it up, opened it and noticed it was on even though the screen was damaged, and then closed it back. By the time I got it back it was dead and could not come on again. I have since replaced the damaged screen, but the device will not come on and cannot enter bootloader either. The device get warm if the battery is left on.

coolbeans252 said:
finally managed to get mine fixed, mine was out of warranty too and sent it off to carphone warehouse express service, took 3 weeks but was fixed with a standard chargeable repair charge of £40
Click to expand...
Click to collapse
i guess thats what i will have to end up doing
anyone goten repairs done in north america?
( i live in western canada)

got the same problem
sofene said:
I have a somewhat similar problem but not from upgrading. I accidentally dropped the device after a successful upgrade and the screen got damaged. Someone picked it up, opened it and noticed it was on even though the screen was damaged, and then closed it back. By the time I got it back it was dead and could not come on again. I have since replaced the damaged screen, but the device will not come on and cannot enter bootloader either. The device get warm if the battery is left on.
Click to expand...
Click to collapse
hi..please let me know if your device is fixed and how you managed to fix it. my email id is [email protected]

http://forum.xda-developers.com/show...6&postcount=52

Phone bricked, unbricking TUT not working.

I was updating my Dash the other day to Ookba's latest rom when I received an error message. It gave me instructions on how to fix it (loading it in bootloader etc.), and I received a message saying it was successful and the rom would continue updating. I received another error message saying the rom was corrupt, and the program shutdown. My phone will not power up now. It was at(or near) full charge while reflashing, but will not turn on regardless of the button combination I hold while attempting to power it on.
Any ideas? Thanks!

what rom did you attempt to load in the bootloader? it should have been the factory rom..if not, then that is probably the root of the problem....as far as it not powering on now...I leave that open to the forum...cuz' I have no relevant advice on that one....

when trying to do the gold card method to unbrick my phone, it say Invalid certificate ..? wats this and how to fix it.

I was trying the "[ROM][EXCA][WWE][* 3VOLUTION SERIES *][WM6.5 STD 21854][Build 3VO.3.00.112509]" when it locked up on me, and still hasn't been able to power up.
Today when plugging it in after a week of letting sit, a red led light showed where the normal orange/green led would normally light up when charging/charged. The light stayed on for a few seconds, then shut off. Nothing else though. Any other suggestions?

allthrottle said:
I was trying the "[ROM][EXCA][WWE][* 3VOLUTION SERIES *][WM6.5 STD 21854][Build 3VO.3.00.112509]" when it locked up on me, and still hasn't been able to power up.
Today when plugging it in after a week of letting sit, a red led light showed where the normal orange/green led would normally light up when charging/charged. The light stayed on for a few seconds, then shut off. Nothing else though. Any other suggestions?
Click to expand...
Click to collapse
Red light my friend means your battery is gone, probably your phone is not bricked maybe it just needs a battery replacement

I am having the same issue, except that I can place the battery in another Dash and it boots up just fine, so I am assuming it is not the battery. I will buy another one to double check. My problem is the same as which is stated above. Can anyone help? Thank you.

Just an update to see if I can get anymore suggestions. Hadn't touched the phone since the last post. Bought a new battery for it this weekend and it's still dead as ever. Won't boot at all. Not into bootloader, nothing. I get absolutely no response holding power+cam or softkeys+power.
Any advice? I don't absolutely need the phone as I've picked up a G1, but it would be nice to have this working, or at least trash it if it's junk.
Thanks!

Everyone else stumped too?

Have you connected to the wall charger to see if you get some response with your new battery?.

Just unbricked mine after being dropped again by the girlfriend. Try this, plus usb cable into device, press the camera button only. See if that gets you into the bootloader screen. If so, flash the oem build and go from there.

Tried it plugged into a wall charger for 3-4 hours, car charger for another hour, and computer/usb for another hour. No response anytime.
I'll try the camera only method when I get home later.
Thanks!

Just tried plugging it into the computer and holding only the camera. Didn't work. Tried that, tried holding power+cam, power+soft keys etc.. What's weird is I had the battery cover off while doing this, and the battery slipped out while I was holding cam+pwr, it actually loaded into the multicolor(bootloader?) screen twice, but would shutoff within a few seconds. Now I'm back to no response from it.

Finally got it to stay on the boot screen without turning off, but can't get it to establish an activesync with the computer so I can't flash it. The computer is obviously detecting it though, because I see an icon that says "remove smartphone usb sync".

The phone's FINALLY working again! Thanks again guys! I was a couple of days away from junking the thing! I couldn't get Ookba's rom to flash it, so I went back to the unbricking tutorial and saw that he recommended grabbing the factory rom to flash it. I did, it worked, and I just flashed it again using Ookba's rom.
Took quite a few months, but it's back! Thanks!

Galxy s2 Vibrating and crashes at loading bar.

So i've looked around and no one that i've seen has the same exact problem as i do. Here's my post in another forums about my problem.
Here's my story about my Galaxy s2 for T-mobile. My phone randomly turned off 2 days and whenever i tried to turn it on, it would restart and basically never get pass the blue loading bar screen. Second, i found out about this boot loop sequence and i was able to do a factory wipe.
After i factory wiped the data etc off the phone, i was able to use it until it ran out of battery, but then after i found out it ran out of battery, it wouldn't let me turn it back on, it wouldn't get pass the loading screen, once again. On the other hand, i am able to go to recovery mode or download mode, but the phone shuts off before i can even try and click on the options i want.
Today, i found out that if i kept pressing power button consecutively on the phone, I'd be able to go to my home screen and basically act as if nothing ever happened, it'd function as a new phone! I then had the nerves of turning off my phone just to make sure it finally works now, but my hopes were crushed and now the pressing the power trick does not even work anymore. It would probably work one out of 10-15 times, and in the end it'd still restart. I am using a gingerbread galaxy s2. My friend tried using the usb jib on my phone, and it worked but whenever he tried to plug in the usb, the phone would just restart. I am extremely frustrated with this, and if you can help, please do so because it's important that i fix this phone. If you have any questions, please feel free to ask!
Hi there, thank you for the welcoming me to the forums. No, my phone is not rooted, it has always been gingerbread etc i never tried rooting because i never knew how:/ I believe this started when i was just browsing around facebook, so i'm not entirely sure what happened... Uhmm i tried going to download mode through the volume keys and power button when it's connected to usb to the i think it's odin3? and it'd be in the download mode but as soon as the computer says it's connected, the phone would just turn off again and bam, it's like nothing ever happened. My phone does charge when it's plugged in, but it doesn't show it's being charged but i remember my battery was dead last night and i charged it till today and now it's got power. ANd no i don't have a warranty:/ i really hope you can help me

Sounds like a faulty power button. Check out Mobiletech video for thier power button repair service.
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-ii-t-mobile-power-button-repair/
Sent from my SGH-T989 using xda premium

[Q] Help - Glide crashes and restarts

I bought a Samsung Glide i927 phone last month in the US, i bought it unlocked as i am from argentine, and i wanted to use it with movistar.
Recently the phone started to crash a lot, by that i mean that the screen starts going white, with horizontal lines and pixels of different colors appearing, then just turn off or restarts itself, only to crash again as soon as it starts an then turns off.
When this happens i try to start the phone and select the shut down option myself to see if the next time it starts it doesnt crash. But sooner or later it happens again.
This problem its happening too often, and not while doing something in particular like running an app or something. Sometimes it crashes just by plugging it to the power adapter, it even shows the white screen with the lines instead of the charging battery image when i charge it while turned off. I have already try to fix it upgrading android or doing a factory reset, but that didnt work.
Anyone have any idea of how to resolve the problem, or if its a hardware malfunction that cant be fixed?
To make things more difficult, as i said earlier im from argentine, and i cant go to AT&T or Samsung to get it fixed or get a replacement. English is not my first language, so please forgive my orthographic mistakes.
Thanks

This really sounds like some hardware problem, but to be safe, learn how to use Odin and use it to revert your phone to completely stock condition (cleaner than factory reset).
Sent from Samsung Captivate Glide @ CM10.1.2

AndyYan said:
This really sounds like some hardware problem, but to be safe, learn how to use Odin and use it to revert your phone to completely stock condition (cleaner than factory reset).
Sent from Samsung Captivate Glide @ CM10.1.2
Click to expand...
Click to collapse
I tried to do that, but the first times when Odin try to reboot the phone it just freezes and i have to unplug it. After many tries it finally finished, but the phone keeps freezing and crashing.
The phone even crashes while turned of and conected to the power adapter.
Do you think that with LiteROM 0.9.0, that might fix this issues?

I've got reboots too, try to disable auto brighness
It helps for me
Sent from my SGH-I927 using xda app-developers app

Power button issue
I am having a similar problem. At first, it just happened on rare occasions. However, today, it started doing it repeatedly. The phone was unusable. I did some checking around, and it appears that the power buttons on Samsung phones are prone to sticking. Some people suggest you actually remove the battery and slam the power button against a table. I wasn't going to do that, because I could just see it doing even more damage. What I did instead was firmly tap the power button repeatedly. It seemed to unstick the power button and allow the phone to function again.
Another alternative is to have the power button replaced, but that might be a hassle.

First of all, sorry for my bad english.
I bought it on amazon a few days ago, I have the same problem...
I thing aznemesis is right, because my power buttom is very sensitive, in fact, some times, when I press the button smooth and fast, to turn off the display like, the typical menu appears as if I had pressed the button for much longer period. Which proves your theory. The problem is if I hit the button over a table and the button breaks here in Chile do not exist spares of the terminal

Well, I did. I couldn't stand the desire to do so. After nearly 18 hours, the terminal isn't rebooted again.

Panchon1978 said:
I bought a Samsung Glide i927 phone last month in the US, i bought it unlocked as i am from argentine, and i wanted to use it with movistar.
Recently the phone started to crash a lot, by that i mean that the screen starts going white, with horizontal lines and pixels of different colors appearing, then just turn off or restarts itself, only to crash again as soon as it starts an then turns off.
When this happens i try to start the phone and select the shut down option myself to see if the next time it starts it doesnt crash. But sooner or later it happens again.
This problem its happening too often, and not while doing something in particular like running an app or something. Sometimes it crashes just by plugging it to the power adapter, it even shows the white screen with the lines instead of the charging battery image when i charge it while turned off. I have already try to fix it upgrading android or doing a factory reset, but that didnt work.
Anyone have any idea of how to resolve the problem, or if its a hardware malfunction that cant be fixed?
To make things more difficult, as i said earlier im from argentine, and i cant go to AT&T or Samsung to get it fixed or get a replacement. English is not my first language, so please forgive my orthographic mistakes.
Thanks
Click to expand...
Click to collapse
The horizontal lines on the screen sound as if it is an overheating issue. What were you doing before your phone shut off? Are you using the factory charger?

cure found
take the battery out...blow on the power button with some compressed gas to get the dust out....then pour a drop of silicone based lubricant on the power button so that most of it gets in the gaps...then hit the power button a few times....haven't had any reboots since then

[Q] SPH-L710 reboots in recovery Battery, power button issues possible

I have read the other posts regarding the rebooting issues of the Sprint Galaxy S3 variant, but I seem to have a touch more difficult problem. My phone constantly resets and seems to be getting worse. It now will reset in the middle of recovery. I was able to wipe the cache and dalvik and then it started resetting even more frequently in recovery and made reloading the rom impossible. It even resets in the download screen. So it makes it impossible to use Odin and other applications. If anyone has any ideas let me know. I have a few possible options that I am pondering. The following is what led up to this if you need some background:
A week ago, I noticed that my battery suddenly was not charging when wifi was on. I turned it off thinking it was some glitch and reset the phone and plugged it in to charge. It said it was at 100 % some hours later. then I turned it back on again and within a couple minutes, it said it was at 22%. So I hard reset and then plugged it into the wall, but it was still not charging. I had go somewhere,so I plugged it into the car charger and enabled fast charge. I turned on my data and all the sudden it rebooted, lost my wifi password, but when it came back on, it was charging properly. So I thought it was just some odd glitch. Charged properly for days.
Then I noticed the phone starting to randomly reset maybe once very other day when texting. I was actually going to put on a new rom tomorrow thinking maybe my old one had become corrupt. Then it suddenly increased drastically tonight to where it was starting to reset constantly. I thought maybe the button was stuck, and pulled off my otter case to make sure it wasnt being pressed down oddly, but it continued. Then I went into recovery and was able to wipe the cache and dalvik before it got really bad and now it won't even let me stay in recovery for any length of time. I almost got a rom loaded when it reset and its been resetting faster than ever. Becoming unresponsive to button presses as well. Even when I could get into the recovery, it would keep showing "swipe screen to open," as the power button was apparently continuing to activate or the phone was trying to reset itself. And yes, I have tried a battery pull several times and then tried to get into recovery, only to be booted out right as I see the recovery screen if I get there.
So that is my problem. I can't flash odin or anything else as the phone just keeps resetting. Part of me thinks to get a new battery and try to see if that doesn't solve my issue, as maybe the battery is causing the phone to reset? But part me is also thinking maybe the power button has gone sticky suddenly? It won't charge it seems as the red light will not come on and it keeps resetting before the battery charging icon can even come up. Any help or advice would be appreciated. I am leaning towards the battery going bad suddenly and shorting out the phone. I now have the battery, which last I saw was at 48% (It was charging when this happened), out of the phone and am waiting till morning to hopefully pick up a new battery. But I would appreciate any insights into this issue.
Thank you very much

Same issue
I'm having the same issue described above with the S3 constantly rebooting. I can get into download mode but it restarts a few seconds into the flash. I have tried a different battery but that did not solve the problem - I am also thinking it's a power button issue... any suggestions?

mawamd said:
I'm having the same issue described above with the S3 constantly rebooting. I can get into download mode but it restarts a few seconds into the flash. I have tried a different battery but that did not solve the problem - I am also thinking it's a power button issue... any suggestions?
Click to expand...
Click to collapse
I just had my phone replaced for same reason ( Thank god for insurance) Download mode would last about 5 seconds, Recovery would do the same. I managed to get a stock restore with flash counter reset to boot as i was walking into the Sprint store for the techs to look at this lol.. Same exact thing happened on my S2. Power button is done. If you have INS call and get it replaced (Took me about a week for new phone)

I read some post on possibly using Samsung Kies to flash a new ROM, but that was for the international version. I would be curious if anyone has ever tried this or if its possible to replace the power button with a part replacement? I have ordered an S4 but this time I will make sure to use the home and left touch pad more often to unlock the phone and save wear on the power button. I wold still be interested f anyone has found a fix for this.

mawamd said:
I'm having the same issue described above with the S3 constantly rebooting. I can get into download mode but it restarts a few seconds into the flash. I have tried a different battery but that did not solve the problem - I am also thinking it's a power button issue... any suggestions?
Click to expand...
Click to collapse
So after looking around, I am pretty convinced this the power button,as people describe on this question. If you don't have insurance, I see there are selling replacements or you can pay someone to replace and fix the power button fairly affordably on ebay. I might go the second route, as I want it fine right and the man had a 100 percent rating positive, and I dont really know what I am doing lol. Thanks everyone for your answers.