I was updating my Dash the other day to Ookba's latest rom when I received an error message. It gave me instructions on how to fix it (loading it in bootloader etc.), and I received a message saying it was successful and the rom would continue updating. I received another error message saying the rom was corrupt, and the program shutdown. My phone will not power up now. It was at(or near) full charge while reflashing, but will not turn on regardless of the button combination I hold while attempting to power it on.
Any ideas? Thanks!
what rom did you attempt to load in the bootloader? it should have been the factory rom..if not, then that is probably the root of the problem....as far as it not powering on now...I leave that open to the forum...cuz' I have no relevant advice on that one....
when trying to do the gold card method to unbrick my phone, it say Invalid certificate ..? wats this and how to fix it.
I was trying the "[ROM][EXCA][WWE][* 3VOLUTION SERIES *][WM6.5 STD 21854][Build 3VO.3.00.112509]" when it locked up on me, and still hasn't been able to power up.
Today when plugging it in after a week of letting sit, a red led light showed where the normal orange/green led would normally light up when charging/charged. The light stayed on for a few seconds, then shut off. Nothing else though. Any other suggestions?
allthrottle said:
I was trying the "[ROM][EXCA][WWE][* 3VOLUTION SERIES *][WM6.5 STD 21854][Build 3VO.3.00.112509]" when it locked up on me, and still hasn't been able to power up.
Today when plugging it in after a week of letting sit, a red led light showed where the normal orange/green led would normally light up when charging/charged. The light stayed on for a few seconds, then shut off. Nothing else though. Any other suggestions?
Click to expand...
Click to collapse
Red light my friend means your battery is gone, probably your phone is not bricked maybe it just needs a battery replacement
I am having the same issue, except that I can place the battery in another Dash and it boots up just fine, so I am assuming it is not the battery. I will buy another one to double check. My problem is the same as which is stated above. Can anyone help? Thank you.
Just an update to see if I can get anymore suggestions. Hadn't touched the phone since the last post. Bought a new battery for it this weekend and it's still dead as ever. Won't boot at all. Not into bootloader, nothing. I get absolutely no response holding power+cam or softkeys+power.
Any advice? I don't absolutely need the phone as I've picked up a G1, but it would be nice to have this working, or at least trash it if it's junk.
Thanks!
Everyone else stumped too?
Have you connected to the wall charger to see if you get some response with your new battery?.
Just unbricked mine after being dropped again by the girlfriend. Try this, plus usb cable into device, press the camera button only. See if that gets you into the bootloader screen. If so, flash the oem build and go from there.
Tried it plugged into a wall charger for 3-4 hours, car charger for another hour, and computer/usb for another hour. No response anytime.
I'll try the camera only method when I get home later.
Thanks!
Just tried plugging it into the computer and holding only the camera. Didn't work. Tried that, tried holding power+cam, power+soft keys etc.. What's weird is I had the battery cover off while doing this, and the battery slipped out while I was holding cam+pwr, it actually loaded into the multicolor(bootloader?) screen twice, but would shutoff within a few seconds. Now I'm back to no response from it.
Finally got it to stay on the boot screen without turning off, but can't get it to establish an activesync with the computer so I can't flash it. The computer is obviously detecting it though, because I see an icon that says "remove smartphone usb sync".
The phone's FINALLY working again! Thanks again guys! I was a couple of days away from junking the thing! I couldn't get Ookba's rom to flash it, so I went back to the unbricking tutorial and saw that he recommended grabbing the factory rom to flash it. I did, it worked, and I just flashed it again using Ookba's rom.
Took quite a few months, but it's back! Thanks!
Related
Hi,
My Universal fail to power on.
It do not enter boot loader with light + power + reset and show no signs of life. Batteries are both new and tested in other working units.
When connected to USB, PC reports "USB device not recognised"
I had ROMS flashed but failed at 99%. When reset the units did not power on or showed any signs of life.
It had been working fine up until the unsucssesful flash update.
I would like to be able to use it for work .
Please either post replies here or email me [email protected]
Your time and efforts will be greatly appreciated.
Regards,
quou
quou2006 said:
Hi,
My Universal fail to power on.
It do not enter boot loader with light + power + reset and show no signs of life. Batteries are both new and tested in other working units.
When connected to USB, PC reports "USB device not recognised"
I had ROMS flashed but failed at 99%. When reset the units did not power on or showed any signs of life.
It had been working fine up until the unsucssesful flash update.
I would like to be able to use it for work .
Please either post replies here or email me [email protected]
Your time and efforts will be greatly appreciated.
Regards,
quou
Click to expand...
Click to collapse
Please try to enter the bootloader mode in a bright room as it is very difficult to see in poorly lit environment. Till you enter the bootloader mode your device will not be recognised. Perhaps one of the three keys is getting released..the light button is the usual culprit. Once you are in the bootloader you can reflash.
Thank d_ranade for your answer.
I am sure the screen is 'all black' and I've tried to press the buttons several times.
I think the main problem now is how to enter the Bootloader.
I sometimes find it takes several goes to get into Bootloader mode. If not, have you tried a hard reset?
I've tried whatever i can do. Hard reset is useless too.
quou2006 said:
Hi,
My Universal fail to power on.
It do not enter boot loader with light + power + reset and show no signs of life. Batteries are both new and tested in other working units.
When connected to USB, PC reports "USB device not recognised"
I had ROMS flashed but failed at 99%. When reset the units did not power on or showed any signs of life.
It had been working fine up until the unsucssesful flash update.
I would like to be able to use it for work .
Please either post replies here or email me [email protected]
Your time and efforts will be greatly appreciated.
Regards,
quou
Click to expand...
Click to collapse
I have sent you a pm, it should help you.
-Jwrightmcps
Thank Jwrightmcps for your help, but i can not enter the Bootloader ,so can not use mtty to do more.
Unable to start/see bootloader
I seem to have the same problem with my upgraded universal which was working fine for about ten days. Then I installed TomTom on it and again it was all working that evening.
Then, when I turned it on the screen went blank (white), so I re-flashed it, but, part way through the screen went black, so I left it connected for further hour and nothing. I have since been unable to get it to do anything, it is not recognised by activesynch, it will not charge (either from the mains or the USB on either of the batteries) nor will it turn on or respond in any way.
I have unset ‘allow usb connections’. I have tried solidly for +/-10 minutes doing the backlight + on/off button and reset bit - repeatedly, with my wife helping to ensure all buttons were being pressed. All I got was a message from MicroSoft telling me that ‘One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it’. The only positive thing is that every time I do it and depress the reset, the red LED flashes (provided I leave the USB cable in) but at no point have either of us been able to see any writing on the screen.
Any guidance (apart from where to take it for recycling) would be welcome…
It happened to me several times too. Even in the old ROMS. But had learned many things out of it. I removed the battery. Wait for several seconds or maybe minute before placing it back. And after placing it back wait again for some time before doing the "power + light + reset" (bootloader). At some point when I am in the bootloader mode already and reflashing, connected to the PC already, the screen went blank again. So I'm sure that something went wrong again. I repeated the procedure again (removing battery, placing it back etc...) and the reflashing continued. It takes patience (maybe).
After having experienced this so many times, I'm beginning to assume that it is not because the battery is "bad" or there is a problem on the ROM being reflashed. It is on how it (the battery) is connected to the unit. The reason why it does not turn on, charge even if connected to the charger, does not hard reset, does not react to anything... I just don't know.
One thing more, the procedure I said above sometimes does not work at once. But at least I managed to "resurrect" my device several times.
This I am sure, it is not in the ROM that is being flashed or the update...
Hope this helps,
Lelen
lelen, Thanks for your assistance. I tried last night, but it still could not enter the bootloader mode...
I have the same problem =( and i don't know what to do, someone told me that i have to change motherbord to resolve this problem, i hope there are some other solutions.
Dead Uni
I too had this problem. With the device not responding at all and not able to enter bootloader stops mtty from working.
Only way i could get it to work was to take it to an O2 shop to send it away for repair (luckily the O2 XDA range has a 2 year warranty and because its completely dead they cant tell the OS has been modified).
Unfortunatly like the previous post i think it can only be fixed by replacing the mainboard.
Hi all, i found this thread http://forum.xda-developers.com/showthread.php?t=291097&page=6
so many people have the same problem , and nobody found a solution? i can't believe that on all this universals died motherboard, and there is no way to fix it with some special cable or some programm.
yes,i post the last reply of the thread you mentioned above, but nobody can resolve it.
I recommend you remove the battery and leave it over night. Put the battery back on, ensure it is properly mouted and try booting it.
It worked for some, no idea why though. I'm actually suspecting a bad battery mounting, which results in the motherboard unable to detect a battery is iserted, thus refusing to boot.
finally managed to get mine fixed, mine was out of warranty too and sent it off to carphone warehouse express service, took 3 weeks but was fixed with a standard chargeable repair charge of £40
I have a somewhat similar problem but not from upgrading. I accidentally dropped the device after a successful upgrade and the screen got damaged. Someone picked it up, opened it and noticed it was on even though the screen was damaged, and then closed it back. By the time I got it back it was dead and could not come on again. I have since replaced the damaged screen, but the device will not come on and cannot enter bootloader either. The device get warm if the battery is left on.
coolbeans252 said:
finally managed to get mine fixed, mine was out of warranty too and sent it off to carphone warehouse express service, took 3 weeks but was fixed with a standard chargeable repair charge of £40
Click to expand...
Click to collapse
i guess thats what i will have to end up doing
anyone goten repairs done in north america?
( i live in western canada)
got the same problem
sofene said:
I have a somewhat similar problem but not from upgrading. I accidentally dropped the device after a successful upgrade and the screen got damaged. Someone picked it up, opened it and noticed it was on even though the screen was damaged, and then closed it back. By the time I got it back it was dead and could not come on again. I have since replaced the damaged screen, but the device will not come on and cannot enter bootloader either. The device get warm if the battery is left on.
Click to expand...
Click to collapse
hi..please let me know if your device is fixed and how you managed to fix it. my email id is [email protected]
http://forum.xda-developers.com/show...6&postcount=52
Running new LVSW version of WM6. Working smooth as glass for 3 days now and this morning I turned on the phone, checked my email, adjusted call volume and the thing locked up HARD. I tried everything but nothing worked so I just pressed the reset button on the bottom. It rebooted but hung on the boot splash after displaying the red version numbers on the bottom. After a minute or so the green wireless light began to flash so I thought it was just slow booting, i left it like this for 15 min and it never proceeded to finish booting so I pressed reset again. Same result, stuck in boot splash forever. Since it was just going to sit and run down the power I unseated the battery to turn it off (the power button wouldnt do a thing.) Finally I get to work, I figure I'll put it in bootloader and hopefully just reflash it. As soon as I plug it into the USB cable and boot it up, it came up fine. Anyone have ANY idea what the heck is going on? Thinking now of trying the new WM Black edition v1.2 but with the recent strangeness of the current rom I'm wondering if I'll wind up bricking it. Any advice is greatly appreciated.
[email protected] said:
Running new LVSW version of WM6. Working smooth as glass for 3 days now and this morning I turned on the phone, checked my email, adjusted call volume and the thing locked up HARD. I tried everything but nothing worked so I just pressed the reset button on the bottom. It rebooted but hung on the boot splash after displaying the red version numbers on the bottom. After a minute or so the green wireless light began to flash so I thought it was just slow booting, i left it like this for 15 min and it never proceeded to finish booting so I pressed reset again. Same result, stuck in boot splash forever. Since it was just going to sit and run down the power I unseated the battery to turn it off (the power button wouldnt do a thing.) Finally I get to work, I figure I'll put it in bootloader and hopefully just reflash it. As soon as I plug it into the USB cable and boot it up, it came up fine. Anyone have ANY idea what the heck is going on? Thinking now of trying the new WM Black edition v1.2 but with the recent strangeness of the current rom I'm wondering if I'll wind up bricking it. Any advice is greatly appreciated.
Click to expand...
Click to collapse
Was your battery fully charged?
yep
Yes, 100%, had just taken it off charge about an hour before....
It has happened to me twice
The first time that I couldn't igure out what to do I simply Hard reset the device
The second and last time that happened to me (2 days ago)
after 3 consecutive soft reboots the thing came back to normal operating status..
I suspect that this has to do with ROM
Anyways I sure hope this is fixed with the new release...
Which I may flash later on today...
Weird thing happened with my phone today. Was listening to some music and browsing the facebook at the same time and suddenly music changed to this high pitch noise and had pull pull out the headphones cos it was really loud.
Everything on the phone froze and I was not able to do anything. None of the buttons worked etc.
I ended up removing the battery and once inserted it back, and pressed the on button, phone wouldn't come back on. Not even a vibration.
I have just plugged it to my PC and can see the orange light as if it is charging. But still won't come on. If I try and turn it on, orange light disappers but if I take the battery out and back in again, starts to charge - orange light.
I know the phone was fully charged before I left work and this happened almost like 15-20 minutes later.
I will contact HTC tomorrow, but just wondering if they'll repair it as I have used unrevoked about a week ago to root the phone but I have not loaded any roms as yet - Still have the original t-mobile rom.
So the screen stays completly black when you power the device on ?
You might try to Hard reset the device.
I would recommend this anyway before giving the phone away.
Else you can try to boot into recovery.
Or connect to your PC via USB and see whats happening.
Boot into recovery by holding down Vol Down and powering on. Try clearing the cache and rebooting.
If it doesn't boot, I recommend, doing a full wipe and trying again.
If this still doesn't work then put a room on your SD card and flash.
If you can't boot to recovery then its a hardware fault or battery issue. I suggest going into your local Telco store and ask to test with another battery.
Good Luck
Further to this, this morning I have noticed that the battery light was green, so the battery is obviously charging.
I still cannot turn on the device using power + vol down.
Called HTC now and arranged a collection.
i have a a100 with the latest flexreaper rom installed and im stuck with a pretty serious issue:
a couple of days ago the tab was acting real slow and sluggish and getting bad battery life didnt think nothing of it so i just rebooted a couple times and left it alone . all was good untill the battery hit 10% and i plugged it up using the factory ac adapter. the next day (maybe 6-7 hours later) i went to turn it on and nothing no vibrate no screen flash nothing; other than the power button turning blue as i pressed it and it would stay on for a couple hours but still no other response from the tablet.
im at my wits end on what could be wrong and now i got my wife with her foot on my neck till i get it fixed. can anyone help me?
ive tried to do a hard reset with the reset button tried to boot into recovery /bootloader no dice
(also my home button flashed a couple time i pressed the power button) dont know if its relevant but wanna get as much info out as possible
wondering if anyone can help me...
frenize said:
wondering if anyone can help me...
Click to expand...
Click to collapse
It may take awhile for someone to see this and form something to try, random bricking for no reason is rare, its almost always some error by the user. However have you attempted adb connection to it? Leave it powered off, connect to the PC you used to unlock the boot loader then power on. Does the PC make the USB connect sound? Does the Acer vibrate? Did the home key blink again?
It really sounds like your boot partition is wrecked which wouldn't normally happen outside of flashing. If boot loader is trash then it won't know what to do and just sit there. No recovery or anything else.
Tapatalked from my Galaxy S II.
pio_masaki said:
It may take awhile for someone to see this and form something to try, random bricking for no reason is rare, its almost always some error by the user. However have you attempted adb connection to it? Leave it powered off, connect to the PC you used to unlock the boot loader then power on. Does the PC make the USB connect sound? Does the Acer vibrate? Did the home key blink again?
It really sounds like your boot partition is wrecked which wouldn't normally happen outside of flashing. If boot loader is trash then it won't know what to do and just sit there. No recovery or anything else.
Tapatalked from my Galaxy S II.
Click to expand...
Click to collapse
it made something like the connect sound but instead of the regular duh doom sound it did a dadadoom (kinda hard to describe the sound) but it was faster than ive ever heard the connect sound before which is weird. the tab didnt vibrate and it seems the home button blinks when the tab is dead and needs recharged
frenize said:
it made something like the connect sound but instead of the regular duh doom sound it did a dadadoom (kinda hard to describe the sound) but it was faster than ive ever heard the connect sound before which is weird. the tab didnt vibrate and it seems the home button blinks when the tab is dead and needs recharged
Click to expand...
Click to collapse
Yeah I know that sound it means USB connected but error for some reason. Its been shown if this thing dies all the way down it wont read the battery correctly and probably needs to be sent in. Before that I personally would unplug it open it up and remove the battery for awhile, maybe an hour then put it back and plug it in. But thats me, not the advice I'm giving. If you have warantee on it use that.
The batteries on a lot of devices and laptops etc have something of a fail safe, if the voltage drops below a certain point it trips to prevent cell damage, however it renders the battery useless.
I haven't searched out much past that if a reset is possible by us, but it seems the pack is trash after or needs sent in.
Since this is a sealed unit you void warranty opening it (well unlocking the boot loader did too) so you can't send it in for repairs without paying for it.
I hope someone can jump in and help figure this out, and prove me wrong.
Tapatalked from my Galaxy S II.
Weird, This exact same thing happened to me. Used it in the morning and now after work it won't turn on. I had already tried disconnecting the battery, but hadn't thought to leave it disconnected for an hour. My tablet has been running the leaked ICS since it came out and The last factory reset it had was about a month ago. It was working fine up until this. The power button seems to be responding correctly, the issue is that after the LEDs light up, there is no vibration or display. I hope someone can help us with this issue.
EDIT:
It won't connect in ADB mode. It will only appear on my computer as an APX device and since there is no vibration I am unable to boot into fastboot. Any help or suggestions? All the threads I have found have involved booting into fastboot.
i am also having this problem. i set ti backup last night to save to box i turned it on this morning it.worked set it on the charger came back to a frozen screen. I turned it off now just a black screen it turns on or the home button dose but nothing comes up on the screen
same thing here.
max69power said:
i am also having this problem. i set ti backup last night to save to box i turned it on this morning it.worked set it on the charger came back to a frozen screen. I turned it off now just a black screen it turns on or the home button dose but nothing comes up on the screen
Click to expand...
Click to collapse
I have been using ICS the leaked one, and last night I was goint to check my email and it did not turn on, I though the battery died. I plugged to the charger and this morning I tried to turning it on but it failed. I did the reset pin but nothing. I connected to the computer and it was recognized as a APX device and installed a driver ACER Picasso USB recover but i cant access anything. I am a nob. Thanks
A100 blackscreen
i am also having this problem. last night. just a black screen it turns on or the home button dose but nothing comes up on the screen. :crying: Help!!!!!!
Has anyone tried holding the power button for a while? Laptops do this too, if someone felt ventures, try taking the battery out and hold the power button. No promises, might work.
sent from my ICONia
same here
Having the exactly same issue, here...
I also tried to hit the hardware reset button and it does not help.
If the screen is blank while powered on its in failsafe mode, in other words is bricked, has to go to Acer.
Tapatalked from my Galaxy S II.
This just happened to me a few weeks ago as well. If you are still under warranty send it in to Acer, thats what I did. I just got an email saying they had fixed it and were sending it back for free!!
At the time I was on the 9/02 JB build. I wonder if this issue is caused by faulty hardware or if it is an issue that was made by rooting and unlocking it? I don't know enough about this stuff to answer that though, but it does make me think whether I should root/unlock it when I get it back or leave it stock.
Also thanks Pio_masaki for helping me a few weeks back wasn't sure if I was even going to send it in until you said they most likely won't be able to tell.
I highly doubt they even CARE when sending these in. They will void for physical damage most likely.
tshm55 said:
Having the exactly same issue, here...
I also tried to hit the hardware reset button and it does not help.
Click to expand...
Click to collapse
Ohmygod,
Same here, but it's 3 years ago. Sorry for digging the topic. Still no hope? I still keep the tablet and have just buy another refurbished mainboard to replace but still no vibrate and blacksreen still there.
Hello All,
I had about 40% battery yesterday evening and in the morning I found phone turned off.
Tried to turn on - no luck.
Plug to the wall charger - a red light appeared and started blinking in a loop (3s red, 1s pause, 3s red etc.)
Tried with different charger - same as above.
Conected to laptop through USB - red light as normally when charging but no battery icon and scrren still black. Tried to turn on and blinking come back.
I left on charging for a while and tried hard reset (power button + volume up) - nothing.
Tried also a magic reset buttonnear the SIM card slot it vibrates 3 times but it didn't turn on
Thank you in advance for your answers.
Try to charge your phone using the wall charger for at least one full day. If that still doesn't work, try getting into fastboot mode(Vol up while inserting USB into PC), and check if you get a fastboot device. If so, try reflashing the stock via flashmode. If not, I think your battery is dead.
(I had an issue like that on my N4 once, but never on my X1C.)
Hello Jayc94,
If Max1220 tips doesn't work, just use the warranty.
I had the same issue as you, and i sent it back 3 times, using the warranty. As far as i remember, you don't have to pay anything.
My advice, when you get it back from the repair shop, in the package, you have an intervention report. Check exactly what they did. Follow their procedure to reboot your phone, and see what happens few days after.
For me, one week after they sent me back the phone, the same issue was happening again, until the 3rd time. At that time, intervention reports shows they changed battery and antenna, with some other stuff. Until now, i don't have any issue again..
I wih you good luck.
cmartinez.