Hi everyone,
I'm experiencing pretty silly situation with my phone.
So the story begins here:
I was surfing the web while listening to music in the bus when suddenly my oneplus3 randomly turned off and I couldn't turn it back on. (I was on something around 15% on battery so it's not a low battery problem) I tried to turn it on several times and after holding the power button for like 10secs it turned on, and after pressing the power button again (because I needed to get past unlocked bootloader screen and dm-verity) I saw a boot screen. The capacitive button leds turned on and after 3 secs it turned off again, so I started worrying... After a while I tried to access the recovery, but no luck at all. It powers it self off after bootscreen. So I started to research. Tried to flash the entire OS, partritions with msmdownload tool. After several unsuccessful flashes (firehosewritedata failed sometimes while writing userimg or system.img or boot.img) I did get the download complete green text message, and after successful flash, the white LED turned on, even the phone was not plugged in USB or charger and turned off. The screen is completely black and the white led just flashes constantly without blinking or anything. I could only turn the led off by pressing the power button for another 10 secs. And after turning the phone off, problem still remains. After oneplus logo phone shuts down...
I can access bootloader.
And after flashing everything should be on stock, because now I only got screen only about bootloader, no dm-verity..
And of course - I still cannot access the recovery.
p.s. I tried to do the power cycle (as the tech support told me) but still no luck at all.
did u tried the full msmdownload tool (1gb) or the 55mb version ?
Mukthar. said:
did u tried the full msmdownload tool (1gb) or the 55mb version ?
Click to expand...
Click to collapse
1GB version
djemm1996 said:
1GB version
Click to expand...
Click to collapse
Are you sure that you did it right? Did your phone show up as mentioned in the instructions?
Puddi_Puddin said:
Are you sure that you did it right? Did your phone show up as mentioned in the instructions?
Click to expand...
Click to collapse
Of course. Everything is done right. I also get that green "download complete" message.
p.s I also opened the phone. water indicators are fine and no major defects what can i see by eye... All connectors are good as well.
Puddi_Puddin said:
Are you sure that you did it right? Did your phone show up as mentioned in the instructions?
Click to expand...
Click to collapse
And yes, phone was connected right. :good: installed drivers with test mode on Win10 and got Snapdragon device in COM devices. As well the MsmDownload tool shows up my device in port #20
Any ideas?
djemm1996 said:
Any ideas?
Click to expand...
Click to collapse
Follow method 2 from the Hard Brick guide by Naman Bhalla and try two or three times.
Sometimes it takes more than once for restoration.
Since you opened the phone, i think your warranty is gone now.
If the msmdownloadtool didnt help you, there is nothing you can do i think.
try to flash again, and if it still maybe something short inside.
if you have disassembly your phone, try disconnecting various flex cable like camera, sim slot etc that connect to the mainboard, that doesn't prevent device from powered on, then try to turning it on.
if it still, check your mainboard, if you don't know how, send it back.
AcidNoteZ said:
Since you opened the phone, i think your warranty is gone now.
If the msmdownloadtool didnt help you, there is nothing you can do i think.
Click to expand...
Click to collapse
Is ir really gone? There is a still warranty void sticker on the screw there, but of course it's possible to see by eye that the phone has been opened.
I have an appointment with Level2 tech support @oneplus, they are going to remotely flash the entire OS, but do you think they are using pretty similar technique as the msmdownloadtool?
djemm1996 said:
Is ir really gone? There is a still warranty void sticker on the screw there, but of course it's possible to see by eye that the phone has been opened.
I have an appointment with Level2 tech support @oneplus, they are going to remotely flash the entire OS, but do you think they are using pretty similar technique as the msmdownloadtool?
Click to expand...
Click to collapse
They are doing the same thing like you did.
I already had a session since i thought they are going to do something "special"
You can try the remote session but im afraid that wont help you if you already did it multiple times.
What about battery? Charged?
drmuruga said:
What about battery? Charged?
Click to expand...
Click to collapse
Yes battery is charged of course. It's just doint the same thing. Turns on, after a while when bootscreen comes it just turns off and white notification led appears, after that nothing.
I tried to flash it with tool using method 2 for like 15 times with "download complete" messages, but still no luck at all. Tried to erase partritions with fastboot, flashing just only recovery, modded recovery etc. but I still cannot access the recovery nor system. I just don't get it why the phone does not boot into recovery if I flash it or boot it straight away, It just only turns off and that's it. nothing more. Only black screen and white led lighting all the time (after a while the phone turns warm).
I have read all the MsmDownloadTool thread in "Mega Unbrick thread" and saw that few people have experienced the very same situation as me, so I was wondering if there is any fix for this? It's so strange that I was just surfing the Web and it just turned off by it self with like static image for miliseconds and after that just black screen.
There should be any fix. I guess that it's just a partition error...
Ok, not good news. I had a little remote session before a while. They says it's already a hardware problem.
AcidNoteZ said:
Since you opened the phone, i think your warranty is gone now.
If the msmdownloadtool didnt help you, there is nothing you can do i think.
Click to expand...
Click to collapse
Pfffft you think manufacturers notice when you take apart phones? Hell I took apart my Xperia Z2 because it was having problems and then glued it back together with cyanoacrylate hahahaha (worst thing to do but wtv) and no one noticed though it was seemless and everything looked perfect
Guys, I've got something for you! Not really the same thing as Naman.
p.s. not saying its original hehehehe keep safe
man i got a very similiar problem but my op3 has a black screen i was also on low battery around 5-15% when my phone went off after i was in twrp
Actually I was on twrp too! Also I have recently noticed that recovery loading speed was far too long than normal one. I'm talking for something about 5-7 minutes after reboot into twrp. So, who knows what did happen. Just made an RMA request. Will see how it goes.
Anyway, I was on stock 7.1.1 and it's just rooted with custom recovery and that's it! Nothing more! Is that just a factory failure or maybe it's caused by drops i have had? Nothing serious for a 4-5 times for a half year. Of course I have used it even in winter when the snowflakes are coming down from the sky and little rain. Btw, these liquid indicators are white, so all safe. ::laugh:
A
makadama said:
man i got a very similiar problem but my op3 has a black screen i was also on low battery around 5-15% when my phone went off after i was in twrp
Click to expand...
Click to collapse
Related
i have a a100 with the latest flexreaper rom installed and im stuck with a pretty serious issue:
a couple of days ago the tab was acting real slow and sluggish and getting bad battery life didnt think nothing of it so i just rebooted a couple times and left it alone . all was good untill the battery hit 10% and i plugged it up using the factory ac adapter. the next day (maybe 6-7 hours later) i went to turn it on and nothing no vibrate no screen flash nothing; other than the power button turning blue as i pressed it and it would stay on for a couple hours but still no other response from the tablet.
im at my wits end on what could be wrong and now i got my wife with her foot on my neck till i get it fixed. can anyone help me?
ive tried to do a hard reset with the reset button tried to boot into recovery /bootloader no dice
(also my home button flashed a couple time i pressed the power button) dont know if its relevant but wanna get as much info out as possible
wondering if anyone can help me...
frenize said:
wondering if anyone can help me...
Click to expand...
Click to collapse
It may take awhile for someone to see this and form something to try, random bricking for no reason is rare, its almost always some error by the user. However have you attempted adb connection to it? Leave it powered off, connect to the PC you used to unlock the boot loader then power on. Does the PC make the USB connect sound? Does the Acer vibrate? Did the home key blink again?
It really sounds like your boot partition is wrecked which wouldn't normally happen outside of flashing. If boot loader is trash then it won't know what to do and just sit there. No recovery or anything else.
Tapatalked from my Galaxy S II.
pio_masaki said:
It may take awhile for someone to see this and form something to try, random bricking for no reason is rare, its almost always some error by the user. However have you attempted adb connection to it? Leave it powered off, connect to the PC you used to unlock the boot loader then power on. Does the PC make the USB connect sound? Does the Acer vibrate? Did the home key blink again?
It really sounds like your boot partition is wrecked which wouldn't normally happen outside of flashing. If boot loader is trash then it won't know what to do and just sit there. No recovery or anything else.
Tapatalked from my Galaxy S II.
Click to expand...
Click to collapse
it made something like the connect sound but instead of the regular duh doom sound it did a dadadoom (kinda hard to describe the sound) but it was faster than ive ever heard the connect sound before which is weird. the tab didnt vibrate and it seems the home button blinks when the tab is dead and needs recharged
frenize said:
it made something like the connect sound but instead of the regular duh doom sound it did a dadadoom (kinda hard to describe the sound) but it was faster than ive ever heard the connect sound before which is weird. the tab didnt vibrate and it seems the home button blinks when the tab is dead and needs recharged
Click to expand...
Click to collapse
Yeah I know that sound it means USB connected but error for some reason. Its been shown if this thing dies all the way down it wont read the battery correctly and probably needs to be sent in. Before that I personally would unplug it open it up and remove the battery for awhile, maybe an hour then put it back and plug it in. But thats me, not the advice I'm giving. If you have warantee on it use that.
The batteries on a lot of devices and laptops etc have something of a fail safe, if the voltage drops below a certain point it trips to prevent cell damage, however it renders the battery useless.
I haven't searched out much past that if a reset is possible by us, but it seems the pack is trash after or needs sent in.
Since this is a sealed unit you void warranty opening it (well unlocking the boot loader did too) so you can't send it in for repairs without paying for it.
I hope someone can jump in and help figure this out, and prove me wrong.
Tapatalked from my Galaxy S II.
Weird, This exact same thing happened to me. Used it in the morning and now after work it won't turn on. I had already tried disconnecting the battery, but hadn't thought to leave it disconnected for an hour. My tablet has been running the leaked ICS since it came out and The last factory reset it had was about a month ago. It was working fine up until this. The power button seems to be responding correctly, the issue is that after the LEDs light up, there is no vibration or display. I hope someone can help us with this issue.
EDIT:
It won't connect in ADB mode. It will only appear on my computer as an APX device and since there is no vibration I am unable to boot into fastboot. Any help or suggestions? All the threads I have found have involved booting into fastboot.
i am also having this problem. i set ti backup last night to save to box i turned it on this morning it.worked set it on the charger came back to a frozen screen. I turned it off now just a black screen it turns on or the home button dose but nothing comes up on the screen
same thing here.
max69power said:
i am also having this problem. i set ti backup last night to save to box i turned it on this morning it.worked set it on the charger came back to a frozen screen. I turned it off now just a black screen it turns on or the home button dose but nothing comes up on the screen
Click to expand...
Click to collapse
I have been using ICS the leaked one, and last night I was goint to check my email and it did not turn on, I though the battery died. I plugged to the charger and this morning I tried to turning it on but it failed. I did the reset pin but nothing. I connected to the computer and it was recognized as a APX device and installed a driver ACER Picasso USB recover but i cant access anything. I am a nob. Thanks
A100 blackscreen
i am also having this problem. last night. just a black screen it turns on or the home button dose but nothing comes up on the screen. :crying: Help!!!!!!
Has anyone tried holding the power button for a while? Laptops do this too, if someone felt ventures, try taking the battery out and hold the power button. No promises, might work.
sent from my ICONia
same here
Having the exactly same issue, here...
I also tried to hit the hardware reset button and it does not help.
If the screen is blank while powered on its in failsafe mode, in other words is bricked, has to go to Acer.
Tapatalked from my Galaxy S II.
This just happened to me a few weeks ago as well. If you are still under warranty send it in to Acer, thats what I did. I just got an email saying they had fixed it and were sending it back for free!!
At the time I was on the 9/02 JB build. I wonder if this issue is caused by faulty hardware or if it is an issue that was made by rooting and unlocking it? I don't know enough about this stuff to answer that though, but it does make me think whether I should root/unlock it when I get it back or leave it stock.
Also thanks Pio_masaki for helping me a few weeks back wasn't sure if I was even going to send it in until you said they most likely won't be able to tell.
I highly doubt they even CARE when sending these in. They will void for physical damage most likely.
tshm55 said:
Having the exactly same issue, here...
I also tried to hit the hardware reset button and it does not help.
Click to expand...
Click to collapse
Ohmygod,
Same here, but it's 3 years ago. Sorry for digging the topic. Still no hope? I still keep the tablet and have just buy another refurbished mainboard to replace but still no vibrate and blacksreen still there.
Hi everyone,
About 3 months ago I flashed a new rom which I found on this website under the stable tab.
I couldn't have been happier with the new system, everything worked perfectly, but now yesterday I was browsing the google play store when my screen suddenly laggs and gets stuck. So I waited at first, but after a while I tried to closing the screen to let him rest and resolve.. which didn't do anything, and that was strange to begin with. Suddenly the screen went black and did not want to open up again, I waited several hours, still nothing. I placed him i the usb charger and there is no indication that it's charging, no green or orange light. It doesn't respond when I try turning it on/off, or use power/volume down button.
My phone seems dead at it is atm, and I'm really sad.. anything I can still try? Help would be much appreciated.
edit: update, tried charging it again, the range led is blinking now, when I try turning it on while charged the main touch buttons enlighten and dim emediately after. GOing to let it ' charge ' for a bit now.
Miracle! Miracle!!!
Dead man back to life!!!:beer:
Sent from my One™ V using xda-developers-app
haha! lol:laugh::laugh:
R: [Q] HTC one V appears dead.
This phone made me **** in my pants many times, but it always just need a good charge :thumbup:
Don't know what appears to be so funny here, nearly lost my phone.. I'm happy it was just temporarely.
R: [Q] HTC one V appears dead.
Nothing is funny, but this happened many times and we don't know why :thumbdown:
CarelMaes said:
Don't know what appears to be so funny here, nearly lost my phone.. I'm happy it was just temporarely.
Click to expand...
Click to collapse
sorry if i offended u....i was laughing at Soham's post
...and I was just kidding.
Sent from my One™ V using xda-developers-app
CarelMaes said:
Hi everyone,
About 3 months ago I flashed a new rom which I found on this website under the stable tab.
I couldn't have been happier with the new system, everything worked perfectly, but now yesterday I was browsing the google play store when my screen suddenly laggs and gets stuck. So I waited at first, but after a while I tried to closing the screen to let him rest and resolve.. which didn't do anything, and that was strange to begin with. Suddenly the screen went black and did not want to open up again, I waited several hours, still nothing. I placed him i the usb charger and there is no indication that it's charging, no green or orange light. It doesn't respond when I try turning it on/off, or use power/volume down button.
My phone seems dead at it is atm, and I'm really sad.. anything I can still try? Help would be much appreciated.
edit: update, tried charging it again, the range led is blinking now, when I try turning it on while charged the main touch buttons enlighten and dim emediately after. GOing to let it ' charge ' for a bit now.
Click to expand...
Click to collapse
Hi OP,
Just wonderedhow long you left it between your unsuccessful charges and the time it worked. Happened to me yesterday, tried to charge it all night and no luck.
Cheers.
CarelMaes said:
Hi everyone,
About 3 months ago I flashed a new rom which I found on this website under the stable tab.
I couldn't have been happier with the new system, everything worked perfectly, but now yesterday I was browsing the google play store when my screen suddenly laggs and gets stuck. So I waited at first, but after a while I tried to closing the screen to let him rest and resolve.. which didn't do anything, and that was strange to begin with. Suddenly the screen went black and did not want to open up again, I waited several hours, still nothing. I placed him i the usb charger and there is no indication that it's charging, no green or orange light. It doesn't respond when I try turning it on/off, or use power/volume down button.
My phone seems dead at it is atm, and I'm really sad.. anything I can still try? Help would be much appreciated.
edit: update, tried charging it again, the range led is blinking now, when I try turning it on while charged the main touch buttons enlighten and dim emediately after. GOing to let it ' charge ' for a bit now.
Click to expand...
Click to collapse
I am in the situation what to do..not able to get into bootloader complete dead
Amish. said:
I am in the situation what to do..not able to get into bootloader complete dead
Click to expand...
Click to collapse
I also had this problemm, try to charge for some hours.
I don't know why, but my phone boots into recovery when it's turned off and plugged in.
jonas2790 said:
I also had this problemm, try to charge for some hours.
I don't know why, but my phone boots into recovery when it's turned off and plugged in.
Click to expand...
Click to collapse
Its completely unresponsive no led lights no recovery nothing..its like a dummy model..very sad..not getting any answer or tutorial on how to solve this problem :'(
Amish. said:
Its completely unresponsive no led lights no recovery nothing..its like a dummy model..very sad..not getting any answer or tutorial on how to solve this problem :'(
Click to expand...
Click to collapse
Connect it to your PC and check if it shows QHSUSB_DLOAD as the driver.
If this is shown, you may have done something like this, so you hard bricked it.
You may try this software fix (http://forum.xda-developers.com/showthread.php?t=1788227) or this (http://www.jtagbox.com/jtag-news/ri...nbrick-unlock-supercid-imei-repair-supported/) to exit the mode.
jonas2790 said:
Connect it to your PC and check if it shows QHSUSB_DLOAD as the driver.
If this is shown, you may have done something like this, so you hard bricked it.
You may try this software fix (http://forum.xda-developers.com/showthread.php?t=1788227) or this (http://www.jtagbox.com/jtag-news/ri...nbrick-unlock-supercid-imei-repair-supported/) to exit the mode.
Click to expand...
Click to collapse
i solved the problem using adb
Amish. said:
i solved the problem using adb
Click to expand...
Click to collapse
What was the problem?
jonas2790 said:
What was the problem?
Click to expand...
Click to collapse
as i said above just dead.
Hello, new here and I know nothing about rooting nor have I rooted my phone but after looking all over the net I have come here in hopes of finding some tech wizards that can help me.
The Problem:
Turned phone off and a few hours later I tried turning it back on but it only shows the screen with model number and Samsung under it. It shows for a few seconds then the screen goes black and keeps looping like this. I have not rooted or anything. Not dropped in water ( water square is pink though). Phone shows no water damage or corrosion after opening.
What have I done?
I tried booting in recovery and download mode but i have never done it before and I was not successful at getting any other screen besides the model number Samsung screen.
I have tried a different battery after spending some time at the mall (no on carries it any more as it is no longer made) different battery did nothing. Repair guys suggested it may be the button sticking and said hey could clean it for $25. Instead I went home searched the web and disassembled my phone. I cleaned the button areas on the inside of the case and the contact on the inside attached to the circuit board. I have reassembled and it still does the same thing.
After more research I found a video saying to actually remove the internal button from the circuit board to stop the loop (which will leave me with no power button) I have not tried this as I am not that bold (yet).
I am wondering if it is a software problem that can be fixed by using Odin and installing the stock firmware but I just have not found a proper guide that makes enough sense for me to actually try. I don't want to waste my time with something I have never done and make things worse.
I have downloaded Odin and firmware from sammobile but that is about as far as I can go without some hand holding....
Thanks for reading my story any help would be much appreciated.
Fishheadman said:
Hello, new here and I know nothing about rooting nor have I rooted my phone but after looking all over the net I have come here in hopes of finding some tech wizards that can help me.
The Problem:
Turned phone off and a few hours later I tried turning it back on but it only shows the screen with model number and Samsung under it. It shows for a few seconds then the screen goes black and keeps looping like this. I have not rooted or anything. Not dropped in water ( water square is pink though). Phone shows no water damage or corrosion after opening.
What have I done?
I tried booting in recovery and download mode but i have never done it before and I was not successful at getting any other screen besides the model number Samsung screen.
I have tried a different battery after spending some time at the mall (no on carries it any more as it is no longer made) different battery did nothing. Repair guys suggested it may be the button sticking and said hey could clean it for $25. Instead I went home searched the web and disassembled my phone. I cleaned the button areas on the inside of the case and the contact on the inside attached to the circuit board. I have reassembled and it still does the same thing.
After more research I found a video saying to actually remove the internal button from the circuit board to stop the loop (which will leave me with no power button) I have not tried this as I am not that bold (yet).
I am wondering if it is a software problem that can be fixed by using Odin and installing the stock firmware but I just have not found a proper guide that makes enough sense for me to actually try. I don't want to waste my time with something I have never done and make things worse.
I have downloaded Odin and firmware from sammobile but that is about as far as I can go without some hand holding....
Thanks for reading my story any help would be much appreciated.
Click to expand...
Click to collapse
Try this - Press and hold Volume up + Home + Power buttons together a few seconds, you should get recovery mode. And then find factory reset.
garak elim said:
Try this - Press and hold Volume up + Home + Power buttons together a few seconds, you should get recovery mode. And then find factory reset.
Click to expand...
Click to collapse
Thanks for the reply. I have tried this many times and tried again after reading your reply. This should work fairly fast from what I understand right?
My phone is a virgin mobile phone (Canada) is it possible they have locked out recovery / download modes?
When I try to start in recovery nothing happens at all. Screen does not light, phone does not vibrate. Again I have never tried this until now so I don't know if the phone ever booted into these special modes when it was working.
Fishheadman said:
Thanks for the reply. I have tried this many times and tried again after reading your reply. This should work fairly fast from what I understand right?
My phone is a virgin mobile phone (Canada) is it possible they have locked out recovery / download modes?
When I try to start in recovery nothing happens at all. Screen does not light, phone does not vibrate. Again I have never tried this until now so I don't know if the phone ever booted into these special modes when it was working.
Click to expand...
Click to collapse
It's weird. I found something on page hard-reset.com. I cannot post link here now. I put "samsung ace2 recovery" into google and it was on first page. It's hard reset key combination. Try it.
When you plug the phone into the charger, do you get the battery charging status screen?
garak elim said:
It's weird. I found something on page hard-reset.com. I cannot post link here now. I put "samsung ace2 recovery" into google and it was on first page. It's hard reset key combination. Try it.
Click to expand...
Click to collapse
Forget my previous post. I was wrong. I try find another solutions.
Is your battery fully charged?
When I was using this phone the screen suddenly turned black. No powering off or anything, the phone was nearly fully charged anyway. Nothing seems to be working anymore. I tried turning it back on but it's completely unresponsive. It won't even charge anymore. I was wondering if there was any solutions to this and if other people where having this problem or did my phone just brick itself
Are you able to get to the bootloader? by pressing volume + and power at the same time. It may be worth trying to flash stock also. I am no expert its just what I would try.
MrPureskill said:
When I was using this phone the screen suddenly turned black. No powering off or anything, the phone was nearly fully charged anyway. Nothing seems to be working anymore. I tried turning it back on but it's completely unresponsive. It won't even charge anymore. I was wondering if there was any solutions to this and if other people where having this problem or did my phone just brick itself
Click to expand...
Click to collapse
try using spflash all format + download flash stock rom
MrPureskill said:
When I was using this phone the screen suddenly turned black. No powering off or anything, the phone was nearly fully charged anyway. Nothing seems to be working anymore. I tried turning it back on but it's completely unresponsive. It won't even charge anymore. I was wondering if there was any solutions to this and if other people where having this problem or did my phone just brick itself
Click to expand...
Click to collapse
look here and flash stock rom again
http://forum.xda-developers.com/elephone-p8000/help/how-to-guideline-install-mtk-drivers-t3334698
Hello there. I have the same problem, phone suddenly stopped to show anything on the screen, it is comleptely black. Tried to reflash few original roms, without a succsess. Replacing lcd did also not solved the problem. Did anyone find a solution?
Thanx
Did you try to format + reflash using spflash? Check out my video walk thru.
https://youtu.be/rzKll-HG6rQ
Sent from my p8000 using Tapatalk
Of course I did. But at no avail. Today, I found out, that the new screen is partially working. I can see very dark picture, it means, I have no back light. Tried to set it up from engineers mode, but no luck.
So the new screen is on, but without back light, and the phone heats pretty much in the top area.
storm525 said:
Of course I did. But at no avail. Today, I found out, that the new svreen is partialy working. I can see very dark picture, it means, I have no backlight. Tried to set it up from engineers mide, but no luck.
So the new screen is on, but without bacjlight, ans the phone heats pretty much in the top area.
Click to expand...
Click to collapse
If so. Try to pull down the statusbar and swipe a bit under the statusbar line, in the top of the screen from left to right, with some luck you will tap the brightness switcher
Gesendet von meinem Metal mit Tapatalk
I can connect to the phone through Vysor, and when I change the brightness level there, there is no change at all. The Phone does not react to any settings change at all.
Tried eragon rom, but still no change....
storm525 said:
Hello there. I have the same problem, phone suddenly stopped to show anything on the screen, it is comleptely black. Tried to reflash few original roms, without a succsess. Replacing lcd did also not solved the problem. Did anyone find a solution?
Thanx
Click to expand...
Click to collapse
Better hope you still have your garantie, because theres legit no way to restore it. You just have to send it back for it to get fixed. This happened to me once and yesterday twice. sadly I am to dissapointed from this. I am never buying an Elephone again ! PS bro it isnt worth sending this hell of a **** peace back. It costs and the blackscreen thing is gonna happen again in 6-8 months. SO go out there and buy yourself a real phone not this bull****. I have to do the same rn.
P8000 unrespnosive Fix
MrPureskill said:
When I was using this phone the screen suddenly turned black. No powering off or anything, the phone was nearly fully charged anyway. Nothing seems to be working anymore. I tried turning it back on but it's completely unresponsive. It won't even charge anymore. I was wondering if there was any solutions to this and if other people where having this problem or did my phone just brick itself
Click to expand...
Click to collapse
Just happened to me with my 3 year old phone. Left overnight with enough charge. Pressed the side button and nothing - held it down to restart and then complete blank.
Repalced the battery about 1 month ago with one from AliExpress for £5.
So using the kit provided with the battery or a watchmakers screwdriver - undo the 12 tiny screws and remove the white surround and then the inner back with the phone's number on it. Next disconnect the battery socket but be careful as it is tiny - use a torch and magnifier if vision not good. Remove the sim card. Wait 10 minutes - did this with the blue light flashing - it stopped finally on disconnection.
Put it all back together and hey presto fully working phone
So i have had my zenfone for awhile now. i unlocked the bootloader and was able to root it with a temp CWM. it was going fine for a long time.
Then one day my phone started to act up. wouldn't read texts right, false notifications, and app crashing. i thought maybe i had a virus so i ran a cleaning app (Clean Master and Lookout) but they found nothing. so i thought why not restarting the phone? seems to work for some.... *sigh*
Upon restarting the phone i am now stuck on the ZenPhone flip case thing... with the info on the circle. i thought maybe i dropped my phone sometime or somewhere and the case got stuck. okay simple fix, i tried using a magnet to open the case... and it did nothing.
Then I tired going into recovery mode by going through fast boot. but selecting anything in fast boot causes the phone to "freeze" and endlessly vibrate. It can't even detect when its plugged into the computer so i cant do commands on it from fast boot. i cant even do it from the OS as i think when its in the flip thing it doesn't allow PC access (at least i think). but the strange part about being on the OS, is that when phone goes to sleep (screen turns off), it "freezes".
What i'm asking here is there a way to fix this or is this phone lost. i made this account just for this... please help!
Good luck, I wish I had never bought this phone. I've sent it back to A-Sucks two damn times and it's still nothing more than a phone that always has some kind of an issue.
Chocketbear said:
Good luck, I wish I had never bought this phone. I've sent it back to A-Sucks two damn times and it's still nothing more than a phone that always has some kind of an issue.
Click to expand...
Click to collapse
Well i'm not one for giving up so easily. tho i am stumped on this, i would like it if i didnt have to send this back to asus... plus i think i voided my warranty.
Sonrio224 said:
Well i'm not one for giving up so easily. tho i am stumped on this, i would like it if i didnt have to send this back to asus... plus i think i voided my warranty.
Click to expand...
Click to collapse
You have a different issue, yeah don't send it back.
Maybe you can try twrp manager app to flash recovery if you can boot the system
titou4488 said:
Maybe you can try twrp manager app to flash recovery if you can boot the system
Click to expand...
Click to collapse
I tried that. my computer, or any other computer i tried, doesn't detect its connected when in fast boot nor in the OS.
when trying to use the normal recovery on the phone. it gets stuck in an endless vibration until i turn it off.
Booting into anything (i.e. Normal boot, recovery) from fast boot causes the vibration hang
Sonrio224 said:
I tried that. my computer, or any other computer i tried, doesn't detect its connected when in fast boot nor in the OS.
when trying to use the normal recovery on the phone. it gets stuck in an endless vibration until i turn it off.
Booting into anything (i.e. Normal boot, recovery) from fast boot causes the vibration hang
Click to expand...
Click to collapse
Re-read that, nothing was said about the PC...
ultramag69 said:
Re-read that, nothing was said about the PC...
Click to expand...
Click to collapse
my bad... either way, i still cant get into the OS as its stuck on the ZenPhone flip case thing as i stated above. it wont let me do anything from there.
if the phone cannot be saved. i might as well sell it for parts.
Before that, have you tried totally discharging the battery, leaving for a day or 2 to get rid of any last traces of power from the RAM then recharging and starting up again?
Might be something screwy going on with the phones hardware but these things are literally PC's and sometimes they need to have a good shutdown to get rid of all the quirks stuck in ram.
If you don't want to wait, you could just open up and disconnect the battery. You were only going to sell as parts anyway....
ultramag69 said:
Before that, have you tried totally discharging the battery, leaving for a day or 2 to get rid of any last traces of power from the RAM then recharging and starting up again?
Might be something screwy going on with the phones hardware but these things are literally PC's and sometimes they need to have a good shutdown to get rid of all the quirks stuck in ram.
If you don't want to wait, you could just open up and disconnect the battery. You were only going to sell as parts anyway....
Click to expand...
Click to collapse
haven't tried that. ill fully drain the battery and see where i get
Okay so good news. that actually worked... i think. i took the battery out for a bit and let it sit, then i put it back in and it booted up just fine!
but now i have a new issue, i can no longer talk on phone calls. speaker isn't working for some reason. might have put it back together wrong.
all things considered, thank you so much for the help!
No worries, good luck on the speaker issue...