[Q] How to install RUU's in Windows 10 -SOLVED - One (M8) Q&A, Help & Troubleshooting

Has anyone successfully managed to get RUU's to install with Windows 10? I've tried searching and all i seem to get are Windows 10 Mobile references.
I've seen the fixes for Windows 7/8 (Running the RUU in XP Sp3 compatibility mode). However, this does not seem to work.
Any suggestions?

Your thread title is not match to the contents.
You can't extract rom.zip in any windows version as it is encrypted (if that's what you meant by extract the RUU).
Yes .. I can install RUU with Windows 10 (mine is Windows 10 64-bit)
What you need is correct drivers - http://forum.xda-developers.com/showpost.php?p=64926362&postcount=4
So what actually your problem is ? If you're trying to install Vodafone_UK_4.19.161.2 RUU, that RUU is corrupted, won't work.

ckpv5 said:
Your thread title is not match to the contents.
You can't extract rom.zip in any windows version as it is encrypted (if that's what you meant by extract the RUU).
Yes .. I can install RUU with Windows 10 (mine is Windows 10 64-bit)
What you need is correct drivers - http://forum.xda-developers.com/showpost.php?p=64926362&postcount=4
So what actually your problem is ? If you're trying to install Vodafone_UK_4.19.161.2 RUU, that RUU is corrupted, won't work.
Click to expand...
Click to collapse
Thanks! That was the RUU I was trying to run, and essentially nothing would happen, it would ask for permission to run an then not go any further.
sorry for the thread confusion...updated

DRTigerlilly said:
Thanks! That was the RUU I was trying to run, and essentially nothing would happen, it would ask for permission to run an then not go any further.
sorry for the thread confusion...updated
Click to expand...
Click to collapse
No problem .. most important is have you solve your problem with nandroid or firmware ? Have you updated to 6.12.161.4 ?

ckpv5 said:
No problem .. most important is have you solve your problem with nandroid or firmware ? Have you updated to 6.12.161.4 ?
Click to expand...
Click to collapse
I updated to 6.12.161.4 with nandroid, I will probably try the Skydragon Sense 7 ROM at another interval, currently using the Skydragon GPE ROM.
Thank You again!

DRTigerlilly said:
Has anyone successfully managed to get RUU's to install with Windows 10? I've tried searching and all i seem to get are Windows 10 Mobile references.
I've seen the fixes for Windows 7/8 (Running the RUU in XP Sp3 compatibility mode). However, this does not seem to work.
Any suggestions?
Click to expand...
Click to collapse
Your question kept coming up as I searched for why RUUs won't run in Windows 10 64 bit.
Here's a link to the solution that fixed the issue for me:
https://forum.xda-developers.com/showpost.php?p=53081344&postcount=94
Thanks to onthezone for the post.
I had to install all x86 and x64 vcredist files from Microsoft before it worked for me. Tip: save the vcredist_##.exe files in folders based on the version they target (i.e. 2005, 2008, 2010, 2012) since all the file names are the same. I ignored the link to GPE full conversion back to sense roms since that didn't apply to me.
Good luck!
Here's the content in case the link ever goes down:
onthezone said:
Alright after tons of research and trial and error, I believe I found a fix to the installer crashing after accepting t&c. First make sure you have htc sync manager installed. Then install ALL of the c++ programs from here:
Download Visual C++ Redistributable for Visual Studio 2012 Update 4 from Official Microsoft Download Center
Download Microsoft Visual C++ 2005 SP1 Redistributable Package (x86) from Official Microsoft Download Center
Download Microsoft Visual C++ 2005 SP1 Redistributable Package (x64) from Official Microsoft Download Center
Download Microsoft Visual C++ 2008 SP1 Redistributable Package (x86) from Official Microsoft Download Center
Download Microsoft Visual C++ 2008 SP1 Redistributable Package (x64) from Official Microsoft Download Center
Download Microsoft Visual C++ 2010 SP1 Redistributable Package (x86) from Official Microsoft Download Center
Download Microsoft Visual C++ 2010 SP1 Redistributable Package (x64) from Official Microsoft Download Center
Then rerun the ruu file with admin and should work.
If your coming from GPE full conversion you will get a error 156 and have to convert back via this guide:
GPE full conversion back to sense roms
Then rerun the ruu file with admin again and should work.
Click to expand...
Click to collapse

Related

please i need help with DiamondCustomRUU.exe. init error

ok i decided to take the plunge in the dodgy world of flashing
and as luck would have it.......
im following the bible link
http://modmydiamond.info/index.php?option=com_content&task=view&id=15&Itemid=26
i have add the hardspl and confirmed it in the boot loader page tri color.
i have downloaded the *DiamondCustomRUU.exe* file quite a few times and it give this error every time i double click on it.
*The application failed to initialize properly (0xc0000135). click on ok to terminate the application*
the currrent state of the phone
------------------------------
everything on the phone apears to be workng just fine
however there is no touch flow 3D thats gone LOL
what can i do ?
is DiamondCustomRUU.exe the only file that can sort the radio ?
am i doomed ?
yes im slightly panicing too
please help
thanks in advance
HD
the microsoft activesync has synced and on green. connected
Ok thanks for reading. my heart attack is quickly gowing away.
the problem is solved.
the solution is to install .Net 2 from microsoft and install it.
im now moving forward again
HD
WWWWOOOOWWWWw
i done it
wicked you guys are DOGz NADz mate
wwwwooooowwwww
thanks
HD
Nice to see someone can solve his/her problem without any help.
As you can see, it's not that difficult
It still does not work in Win XP x64
I have tried installing .Net framework 2.0 or 3.0 but still fail......
jackycct
if are you trying to flash your phone and failing at the radio section
like above and you are seeing
i have downloaded the *DiamondCustomRUU.exe* file quite a few times and it give this error every time i double click on it.
*The application failed to initialize properly (0xc0000135). click on ok to terminate the application*
Click to expand...
Click to collapse
then download .net from microsoft and install it to your PC not the phone.
the developers are using functions from within .net hence why it is needed
if you have any other problem then please let us know
HD
.Net framework is installed in Win XP x64
I did install the .Net framework in Win XP x64 (64bits, not 32 bits) on my PC.
Before installing the .Net framework, the error message *The application failed to initialize properly (0xc0000135). click on ok to terminate the application* was shown.
After installing .Net framework 2.0 or 3.0, then it crashed and showed "DiamonCustomRUU has encountered a problem and needs to close. We are sorry for the inconvenience."
Win XP x64
Click to expand...
Click to collapse
im not all that clued up on Win XP x64 .net stuff.
maybe that version uses different methods call handlers or mem locations.
sorry i cant help
HD

RUU Won't Install/Shuts Down

Having an issue I've not seen before. I've got an S-OFF M8, AT&T Branded and Super CID. Tried installing the new AT&T Lollipop RUU today and it shuts down after agreeing to the License Agreement. I thought it might be an issue with this particular file, but I re-downloaded it and same thing. Tried a T-Mo file as well and it also failed.
Any idea why? This is a new laptop, running Win7 but I've never had the problem when I've changed laptops before.
I had issues in Windows 8 where it would get to the T&Cs and then stop, changed the RUU compatibility settings to run as Windows 7 and admin and it worked fine so perhaps run the RUU as admin (if you're not already) and see what happens
EddyOS said:
I had issues in Windows 8 where it would get to the T&Cs and then stop, changed the RUU compatibility settings to run as Windows 7 and admin and it worked fine so perhaps run the RUU as admin (if you're not already) and see what happens
Click to expand...
Click to collapse
Good idea, but didn't work for me. I tried turning off Fastboot as well like some suggested. Nevertheless, I kluged my way onto the new AT&T build. Good enough until I get off the road in another week. Thanks for the idea.
diceman725 said:
Having an issue I've not seen before. I've got an S-OFF M8, AT&T Branded and Super CID. Tried installing the new AT&T Lollipop RUU today and it shuts down after agreeing to the License Agreement. I thought it might be an issue with this particular file, but I re-downloaded it and same thing. Tried a T-Mo file as well and it also failed.
Any idea why? This is a new laptop, running Win7 but I've never had the problem when I've changed laptops before.
Click to expand...
Click to collapse
10) Q: When I run the Windows RUU.EXE it just exits when I click next
The RUU executable needs the MS Visual C++ 2008 Redistributable Package (x86) package installed.​
nkk71 said:
10) Q: When I run the Windows RUU.EXE it just exits when I click next
The RUU executable needs the MS Visual C++ 2008 Redistributable Package (x86) package installed.​
Click to expand...
Click to collapse
That was it...

Ruu and Windows 10

So I'm trying to restore my 10 to factory via Ruu.exe that I got from htc site. Made sure I got the correct file for my variant. Installed htc sync drivers and running windows 10 pro.
Whenever I try to run the ruu it says it's extracting files but then closes out. Did some research and found these
https://m.reddit.com/r/htcone/comments/2oxjoc/ruu_wont_run_as_administrator/
And
http://forum.xda-developers.com/htc-one-m8/help/ruus-windows-10-t3356796
Tried it all and still won't run. Any suggestions to get it to run on windows 10? I'm like really stuck, can't figure this out for the life of me please help
nofroyo said:
Any suggestions to get it to run on windows 10?
Click to expand...
Click to collapse
try right-clicking on the ruu.exe and go to properties, then on the Compatibility tab check the box to run in compatibility mode and try Win 7. I'd still run it as administrator though.
I've not actually restored my 10, but i did fire up the ruu once to make sure it downloaded properly and got the main screen. i'm on win10-1511 still
nofroyo said:
So I'm trying to restore my 10 to factory via Ruu.exe that I got from htc site. Made sure I got the correct file for my variant. Installed htc sync drivers and running windows 10 pro.
Whenever I try to run the ruu it says it's extracting files but then closes out. Did some research and found these
https://m.reddit.com/r/htcone/comments/2oxjoc/ruu_wont_run_as_administrator/
And
http://forum.xda-developers.com/htc-one-m8/help/ruus-windows-10-t3356796
Tried it all and still won't run. Any suggestions to get it to run on windows 10? I'm like really stuck, can't figure this out for the life of me please help
Click to expand...
Click to collapse
I followed this and installed all the vcredist linked at post #94 and can confirm that this will fix the issue.
http://forum.xda-developers.com/showthread.php?t=2757462&page=10
nofroyo said:
So I'm trying to restore my 10 to factory via Ruu.exe that I got from htc site. Made sure I got the correct file for my variant. Installed htc sync drivers and running windows 10 pro.
Whenever I try to run the ruu it says it's extracting files but then closes out. Did some research and found these
https://m.reddit.com/r/htcone/comments/2oxjoc/ruu_wont_run_as_administrator/
And
http://forum.xda-developers.com/htc-one-m8/help/ruus-windows-10-t3356796
Tried it all and still won't run. Any suggestions to get it to run on windows 10? I'm like really stuck, can't figure this out for the life of me please help
Click to expand...
Click to collapse
This is also common when you have an incomplete download. I suggest you re-download the file and try again.
I had the very same problem. The download was good. As soon as I installed the vcredist's the same download worked just fine.
rsa 329 said:
I had the very same problem. The download was good. As soon as I installed the vcredist's the same download worked just fine.
Click to expand...
Click to collapse
you said that already. That's why I sad "also".
nofroyo said:
So I'm trying to restore my 10 to factory via Ruu.exe that I got from htc site. Made sure I got the correct file for my variant. Installed htc sync drivers and running windows 10 pro.
Whenever I try to run the ruu it says it's extracting files but then closes out. Did some research and found these
https://m.reddit.com/r/htcone/comments/2oxjoc/ruu_wont_run_as_administrator/
And
http://forum.xda-developers.com/htc-one-m8/help/ruus-windows-10-t3356796
Tried it all and still won't run. Any suggestions to get it to run on windows 10? I'm like really stuck, can't figure this out for the life of me please help
Click to expand...
Click to collapse
Your question kept coming up as I searched for why RUUs won't run in Windows 10 64 bit.
Here's a link to the solution that fixed the issue for me:
https://forum.xda-developers.com/showpost.php?p=53081344&postcount=94
Thanks to onthezone for the post.
I had to install all x86 and x64 vcredist files from Microsoft before it worked for me. Tip: save the vcredist_##.exe files in folders based on the version they target (i.e. 2005, 2008, 2010, 2012) since all the file names are the same. I ignored the link to GPE full conversion back to sense roms since that didn't apply to me.
Good luck!
Here's the content in case the link ever goes down:
onthezone said:
Alright after tons of research and trial and error, I believe I found a fix to the installer crashing after accepting t&c. First make sure you have htc sync manager installed. Then install ALL of the c++ programs from here:
Download Visual C++ Redistributable for Visual Studio 2012 Update 4 from Official Microsoft Download Center
Download Microsoft Visual C++ 2005 SP1 Redistributable Package (x86) from Official Microsoft Download Center
Download Microsoft Visual C++ 2005 SP1 Redistributable Package (x64) from Official Microsoft Download Center
Download Microsoft Visual C++ 2008 SP1 Redistributable Package (x86) from Official Microsoft Download Center
Download Microsoft Visual C++ 2008 SP1 Redistributable Package (x64) from Official Microsoft Download Center
Download Microsoft Visual C++ 2010 SP1 Redistributable Package (x86) from Official Microsoft Download Center
Download Microsoft Visual C++ 2010 SP1 Redistributable Package (x64) from Official Microsoft Download Center
Then rerun the ruu file with admin and should work.
If your coming from GPE full conversion you will get a error 156 and have to convert back via this guide:
GPE full conversion back to sense roms
Then rerun the ruu file with admin again and should work.
Click to expand...
Click to collapse
You must deactivate safe.. In windows defender then it's work
Gesendet von meinem HTC 10 mit Tapatalk
You do not even need all of the vcredist packages, just one... I cannot remember which one however, I believe it was the 2008 x86 or the 2010 x86 one

.Exe in windows 10 Mobile

Hello, I wonder if there is any way to run .exe on devices with Windows 10 Mobile.
If so, could you help with a tutorial? Thanks for the attention.
LuizWay said:
Hello, I wonder if there is any way to run .exe on devices with Windows 10 Mobile.
If so, could you help with a tutorial? Thanks for the attention.
Click to expand...
Click to collapse
exe is the native format of Windows and Windows Phone but it doesn't mean you can copy exe file from your pc and run it.
PC exe files are based on X86 and X64 but Mobile exe files are ARM and they are completely different
Windows CE .exes can be runned?
ARM compiled EXEs can run using my CMD in SSH solution (that @gus33000 automated in Interop Tools). Aside from that, you CAN run a .NET 4/4.5 Console app if it's named specific names (which I explain here: http://forum.xda-developers.com/showthread.php?t=3185766).
snickler said:
ARM compiled EXEs can run using my CMD in SSH solution (that @gus33000 automated in Interop Tools). Aside from that, you CAN run a .NET 4/4.5 Console app if it's named specific names (which I explain here: http://forum.xda-developers.com/showthread.php?t=3185766).
Click to expand...
Click to collapse
Weird... I made a custom C++ console app and it worked fine in console.
lukjok said:
Weird... I made a custom C++ console app and it worked fine in console.
Click to expand...
Click to collapse
Yes, it's supposed to. As long as it was compiled for ARM, it will run.
so...who can made arm exe files?
augustinionut said:
so...who can made arm exe files?
Click to expand...
Click to collapse
Anyone with VS installed and experience But arm-porting requires some additional skills - not all API's/functions are available on the arm platform.
I tried to build Far Manager for arm but still need to take care of about 54 issue (replace missing x86/64 functionality).
:silly: I.m still dreaming about mortscript.... imagine something like tasker on android
Do it. This was the exact reason I made sure to make a tutorial on how to get CMD running over SSH when I noticed it was possible. If you have the talent to, get your programming on.. Make apps and solutions that are useful for us. Let's get W10M on a better level and show everyone what we can do
@augustinionut, you don't need mortscript on windows, it has (suppose to but I haven't checked IoT system32 for it) own tools and services.
@snickler, have you experimented with the services like task scheduler etc.?
snickler said:
Do it. This was the exact reason I made sure to make a tutorial on how to get CMD running over SSH when I noticed it was possible. If you have the talent to, get your programming on.. Make apps and solutions that are useful for us. Let's get W10M on a better level and show everyone what we can do
Click to expand...
Click to collapse
Im a noob, i better do reverse engineering, i dont even have sufficient data do download visual studio
How high are the chances to get Office 2013 (from Windows RT) running on it?
Insignificant said:
How high are the chances to get Office 2013 (from Windows RT) running on it?
Click to expand...
Click to collapse
I think, zero.

[Q] How to install XAP from appx4fun in windows 10 mobile ?

In windows phone 8, The xap file from the website appx4fun.com were supposed to be installed from store app by keeping the XAP file in the root of the sd card and install it from an option in the store. But there is no such option in the store app of Windows 10 mobile. These XAPs can not get install in a regular way( through Interop Tools or By deployment tool ). As far as I think, these XAPs are encrypted and it is first decrypted by the windows phone 8 store and is then installed. Do anyone have any idea on this..?
I'm a noob with windows mobile too but I always used wp 8.1 sdk
jason_l367 said:
I'm a noob with windows mobile too but I always used wp 8.1 sdk
Click to expand...
Click to collapse
The XAPs that i'm talking about, won't install with that deployment tool.
It is not possible to install encrypted XAPs on Windows Mobile 10.
Shaikh Amaan FM said:
The XAPs that i'm talking about, won't install with that deployment tool.
Click to expand...
Click to collapse
Works fine for me.
I'm a noob please don't offended by my weakness (

Categories

Resources