Finally, we'll have M for 920p!!! - Sprint Samsung Galaxy S6

http://www.sammobile.com/2016/03/10/sprint-rolling-out-android-6-0-update-for-the-samsung-galaxy-s6/
read here, so happy for that.

downloading now

downloading now! wonder if the root process from 5.1.1 will work? and the custom recovery installation method via odin??

dont install the twrp recovery via odin! it sat on the "this recovery is not seandroid enforcing" screen

weirdfate said:
dont install the twrp recovery via odin! it sat on the "this recovery is not seandroid enforcing" screen
Click to expand...
Click to collapse
which twrp version did you use?
as i read here, he said that the recent version is compatible still.
http://forum.xda-developers.com/showpost.php?p=65769295&postcount=5

yaibakt said:
which twrp version did you use?
as i read here, he said that the recent version is compatible still.
http://forum.xda-developers.com/showpost.php?p=65769295&postcount=5
Click to expand...
Click to collapse
No go for me. It just sits on the boot screen "seandroid is not enforcing"

I used twrp 3.0 stuck on that screen till refalshed mm md5

Related

[Q] Rooted Note falling into bootloop after CWM Install

Alright. This was very confusing to identify why this was happening, but I managed to pin point the steps which caused it to happen.
I am running 4.4 Kit Kat firmware, I also just recently rooted the phone through CF Autoroot. The next move I wanted to make was to install the CynogenMod ROM, but I did not have a custom recovery installed yet. After downloading the ROM manager app, I installed/flashed CWM and the app read that I had it as my set recovery, so I could check that off the list.
However when I try to boot the phone into recovery mode CWM does not appear at all, but instead the android logo appears with three lines of words that read:
Recovery Booting
Recovery is not Seandroid enforcing
Set warranty bit: recovery
The screen remains like this for a couple of seconds, then shuts off, then repeats. The only way I have been able to fix it is by flashing the stock firmware again through Odin, then rooting the phone the same way I did previously. It seems that setting my recovery to CWM in ROM manager is the cause of this problem, but why? Should I install CWM through other means? Is it ROM manager?
Any advice would be great!
Thanks!
WeezyWombat said:
Alright. This was very confusing to identify why this was happening, but I managed to pin point the steps which caused it to happen.
I am running 4.4 Kit Kat firmware, I also just recently rooted the phone through CF Autoroot. The next move I wanted to make was to install the CynogenMod ROM, but I did not have a custom recovery installed yet. After downloading the ROM manager app, I installed/flashed CWM and the app read that I had it as my set recovery, so I could check that off the list.
However when I try to boot the phone into recovery mode CWM does not appear at all, but instead the android logo appears with three lines of words that read:
Recovery Booting
Recovery is not Seandroid enforcing
Set warranty bit: recovery
The screen remains like this for a couple of seconds, then shuts off, then repeats. The only way I have been able to fix it is by flashing the stock firmware again through Odin, then rooting the phone the same way I did previously. It seems that setting my recovery to CWM in ROM manager is the cause of this problem, but why? Should I install CWM through other means? Is it ROM manager?
Any advice would be great!
Thanks!
Click to expand...
Click to collapse
What recovery version are u flashing
TWEAKED 2.0 ELEMENT V3.0 NOTE 3
BACARDILIMON said:
What recovery version are u flashing
CWM 6.0.4.6
Click to expand...
Click to collapse
BACARDILIMON said:
What recovery version are u flashing
CWM 6.0.4.6
Click to expand...
Click to collapse
WeezyWombat said:
BACARDILIMON said:
What recovery version are u flashing
CWM 6.0.4.6
Click to expand...
Click to collapse
Wrong recovery you need to find philz cwm.
TWEAKED 2.0 ELEMENT V3.0 NOTE 3
---------- Post added at 07:01 AM ---------- Previous post was at 07:00 AM ----------
http://forum.xda-developers.com/showthread.php?t=2595995
TWEAKED 2.0 ELEMENT V3.0 NOTE 3
Click to expand...
Click to collapse
BACARDILIMON said:
WeezyWombat said:
Wrong recovery you need to find philz cwm.
Do I flash that version through Odin?
Click to expand...
Click to collapse
Click to expand...
Click to collapse
WeezyWombat said:
BACARDILIMON said:
WeezyWombat said:
Wrong recovery you need to find philz cwm.
Do I flash that version through Odin?
Click to expand...
Click to collapse
Follow the guidelines they set. Some have done it other ways and been OK some have not. Always best to follow op advice
TWEAKED 2.0 ELEMENT V3.0 NOTE 3
Click to expand...
Click to collapse
Click to expand...
Click to collapse

[Q] Can't Access Recovery Mode

This blows. So my T-mobile Galaxy Note 3 is successfully rooted. Apparently TWRP was successfully installed via Odin, but my device refuses to enter Recovery Mode so no custom roms for me... When I attempt to boot to recovery it just starts on the screen which says:
"Recovery Booting....
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: Recovery"
And then it has the Sammy logo below. It stays on this screen a few seconds, turns black, goes back to that screen, and then depending on when I let go of the 3 finger salute... just boots up regularly after that.
In my research I saw a suggestion to download an app called QuickBoot and select the boot to recovery. When I did this it was just stuck in an infinite loop of the screen I described above until I pull the battery.
This is so damn frustrating. Can anyone point me in the right direction? :crying:
Reinstall TWRP and make sure you have the correct version for your Android version. If that fails, reinstall stock recovery.
Frank
Frank Westlake said:
Reinstall TWRP and make sure you have the correct version for your Android version. If that fails, reinstall stock recovery.
Frank
Click to expand...
Click to collapse
Thanks for the reply. I did try re-installing several times to no avail. The version I'm using is "openrecovery-twrp-2.6.3.0-hltetmo.img.tar" which I downloaded from: http://goo.im/devs/OpenRecovery/hltetmo . Now that you say that about the version I see the date is from January of the most recent one. Is it possible that TWRP cannot be installed on Kitkat? If so, I can't be the only one running into this problem.
jones75534 said:
Thanks for the reply. I did try re-installing several times to no avail. The version I'm using is "openrecovery-twrp-2.6.3.0-hltetmo.img.tar" which I downloaded from: http://goo.im/devs/OpenRecovery/hltetmo . Now that you say that about the version I see the date is from January of the most recent one. Is it possible that TWRP cannot be installed on Kitkat? If so, I can't be the only one running into this problem.
Click to expand...
Click to collapse
I think you need to try 2.7.0.0
http://forum.xda-developers.com/showthread.php?t=2467001
joytofender said:
I think you need to try 2.7.0.0
http://forum.xda-developers.com/showthread.php?t=2467001
Click to expand...
Click to collapse
Thanks, I'm sure that must be it. Looks like there is no 2.7 for T-Mobile Note 3 yet or am I just blind? Here's the site I'm looking at: http://teamw.in/project/twrp2/198
jones75534 said:
Thanks, I'm sure that must be it. Looks like there is no 2.7 for T-Mobile Note 3 yet or am I just blind? Here's the site I'm looking at: http://teamw.in/project/twrp2/198
Click to expand...
Click to collapse
scratch that. I am indeed blind. I see 2.7 in the downloads... the newer versions are at the bottom, not the top..... jeez *face palm*

[Q] Root for SM-P605 kitkat

Hey
I been looking in the forums, but I havent be able to finde if there is a root for kitkat.
Do anyone know if that is one and if so, can you plz link to the thread
Thaning you in advance
Yes: http://autoroot.chainfire.eu
Although I have a p600 and his method worked fine for JB and KK.
Don't use the P6700/601 cf-autoroot on your P605. It will brick it...
The old cf-autoroot is for JB and doesn't work on KK...
Go to the Original developement thread and look at the TWRP 2.7.0.1 thread. It will supply answers and links...
ultramag69 said:
Don't use the P6700/601 cf-autoroot on your P605. It will brick it...
The old cf-autoroot is for JB and doesn't work on KK...
Go to the Original developement thread and look at the TWRP 2.7.0.1 thread. It will supply answers and links...
Click to expand...
Click to collapse
Hi,
TWRP 2.7.0.1 not work to P605XXUCNE2 !!!
What recovery works?
@+
Pyrana
Root p605kitkat 4.4.2
Hi All, hope I'm posting this is the right forum .Im quite a beginner in Android terms so please be patient with me ...
I have a Galaxy Note 10.1 2014 sm-p605 and use it while travelling , i dont have a computer with me most of the time so i rely on the tablet for most of what i do , yesterday i have updated to android 4.4.2 kitkat , whitout knowing i would loose full access to my 32 Gb SD card...well that made me quite furious as most people...so i decided try rooting it , after backing up all my files i used CF Auto Root ( CF-Auto-Root-lt03lte-lt03ltexx-smp605.zip , well that didnt quite work as i was getting
the boot loopwith the message RECOVERY IS NOT SEANDROID ENFORCING, after much reading i was able to recover the tablet to boot back , no rooting was done but im pretty sure i triggered knox and voided the warranty ....anyway i still want to try getting full access to my SD card, either by rooting it or any other way ,if there is a valid file explorer app without root i am keen to know, or if anyone can show me the way to root this device I will really appreciate.Device Details:
AP605ZSUCNE3
CP: P605ZSUCNE1
csc605OZSUCNE3
KitKat 4.4.2
With all do respect TWRP 2.7.0.1 does work on 4.4.2
I have it working myself.
Now To gain root on 4.4.2, install Autoroot - Chainfire for the SM P905
Then search the forums for a P605 recovery (Its somewhere here)
Youll get full root with original stock recovery. Then flash TWRP 2.7.0.1 and then youll be fine.
Remember the current TWRP version on the main post isnt the correct version...Further into the thread there is the correct version.
Need any help. as per always im on Facebook and Am happy to teamviewer in
fkofilee said:
With all do respect TWRP 2.7.0.1 does work on 4.4.2
I have it working myself.
Now To gain root on 4.4.2, install Autoroot - Chainfire for the SM P905
Then search the forums for a P605 recovery (Its somewhere here)
Youll get full root with original stock recovery. Then flash TWRP 2.7.0.1 and then youll be fine.
Remember the current TWRP version on the main post isnt the correct version...Further into the thread there is the correct version.
Need any help. as per always im on Facebook and Am happy to teamviewer in
Click to expand...
Click to collapse
No need to flash auto root for P905 just flash supersu from recovery TWRP 2.7.0.1 WORKS on 4.4.2!!!!
alex_72gr said:
No need to flash auto root for P905 just flash supersu from recovery TWRP 2.7.0.1 WORKS on 4.4.2!!!!
Click to expand...
Click to collapse
Hi,
Test TWRP 2.7.0.1 and no found !! to Kitkat
Big problem screen fully striped and very difficult to restore! And autoroot is a disaster!
Alan-B said:
Hi,
Test TWRP 2.7.0.1 and no found !! to Kitkat
Big problem screen fully striped and very difficult to restore! And autoroot is a disaster!
Click to expand...
Click to collapse
Mate, you were told cf-autoroot DOESN'T work and will screw things up... Why did you flash over something not working right?
You needed to find the stock recovery first, then flash 2.7.0.1 (not 2.7.0.0) to get TWRP installed. You then flash latest supersu using TWRP. This will root your device and give you a custom recovery..
The only thing is TWRP can't make a backup to the External sd card if you have it formatted exFAT...
Best advice, flash stock rom (kitkat only) again using PC ODIN, try again...
ultramag69 said:
Mate, you were told cf-autoroot DOESN'T work and will screw things up... Why did you flash over something not working right?
You needed to find the stock recovery first, then flash 2.7.0.1 (not 2.7.0.0) to get TWRP installed. You then flash latest supersu using TWRP. This will root your device and give you a custom recovery..
The only thing is TWRP can't make a backup to the External sd card if you have it formatted exFAT...
Click to expand...
Click to collapse
Yep, autoroot for P605 hasnt been updated yet to 4.4.2
Yes you can flash twrp and then SU , I came from the full firmware reflash... I t was the only way to put root on at the time.
Alan-B said:
Hi,
Test TWRP 2.7.0.1 and no found !! to Kitkat
Big problem screen fully striped and very difficult to restore! And autoroot is a disaster!
Click to expand...
Click to collapse
You can follow those links to get what you need.
http://forum.xda-developers.com/showpost.php?p=53236030&postcount=19
alex_72gr said:
You can follow those links to get what you need.
http://forum.xda-developers.com/showpost.php?p=53236030&postcount=19
Click to expand...
Click to collapse
Hi,
Having installed TWRP 2.7.0.1 on P605XXUCNE2 everything planted me! over the boot rom recovery mode and more !!!!
I spent two hours to get to switch back download.J 'thought my Note2 LTE 2014 was dead!
Sorry for the translation, I'm French
Alan-B said:
Hi,
Test TWRP 2.7.0.1 and no found !! to Kitkat
Big problem screen fully striped and very difficult to restore! And autoroot is a disaster!
Click to expand...
Click to collapse
0. If you screwed something up, flashed a wrong recovery, flash the stock rom again. If you are stuck in a boot loop, there is plenty of thread about how to boot into odin mode from there.
1. Download attached TWRP 2.7.0.1, it works with P605. I have it myself.
2. Start the tablet, download SuperSU-v1.99r4.zip, place on SD Card.
3. Reboot into Odin mode, (VolDown+Home), flash TWRP. If your recovery is being restored, don't tick Auto Reboot in Odin and turn off manually after flashing, then boot into TWRP.
4. Boot into TWRP, reset to factory settings. You will be asked if you want Root at some point. I think it's when you reboot, I don't remember.
5. When booted into Android, see if SuperSU downloader app is there. If no - boot TWRP and look around, because you missed something.
If yes, reboot into TWRP again and flash UPDATE-SuperSU-v1.99r4.zip.
Congrats, you are now rooted.
xda_user_p600 said:
0. If you screwed something up, flashed a wrong recovery, flash the stock rom again. If you are stuck in a boot loop, there is plenty of thread about how to boot into odin mode from there.
1. Download attached TWRP 2.7.0.1, it works with P605. I have it myself.
2. Start the tablet, download SuperSU-v1.99r4.zip, place on SD Card.
3. Reboot into Odin mode, (VolDown+Home), flash TWRP. If your recovery is being restored, don't tick Auto Reboot in Odin and turn off manually after flashing, then boot into TWRP.
4. Boot into TWRP, reset to factory settings. You will be asked if you want Root at some point. I think it's when you reboot, I don't remember.
5. When booted into Android, see if SuperSU downloader app is there. If no - boot TWRP and look around, because you missed something.
If yes, reboot into TWRP again and flash UPDATE-SuperSU-v1.99r4.zip.
Congrats, you are now rooted.
Click to expand...
Click to collapse
Re hello,
he problem is that just after the flash TWRP nothing boot! or recovery (zebra screen) and reboot loop and very difficult to switch back to download due to the reboot loop!
Just TWRP 2.7.0.0 works with Version 4.3 Note: The 2.7.0.1 works with 4.3 rom or not ? just to test !
Thank you for the helps
Alan-B said:
Re hello,
he problem is that just after the flash TWRP nothing boot! or recovery (zebra screen) and reboot loop and very difficult to switch back to download due to the reboot loop!
Just TWRP 2.7.0.0 works with Version 4.3 Note: The 2.7.0.1 works with 4.3 rom or not ? just to test !
Thank you for the helps
Click to expand...
Click to collapse
Attached version works with 4.4.2 Nordic.
After you flashed wrong recovery and have "zebra screen", Make sure you flashed stock firmware after that. Don't try flashing anything else before you flash stock.
xda_user_p600 said:
Attached version works with 4.4.2 Nordic.
After you flashed wrong recovery and have "zebra screen", Make sure you flashed stock firmware after that. Don't try flashing anything else before you flash stock.
Click to expand...
Click to collapse
re...
I just tested a flash TWRP from your link, but it boot and stuck on the TAB 10.1 lte logo
Mate, flash Kitkat rom 1st then flash TWRP... Doing anything else is gonna get you in trouble...
2.7.0.1 TWRP has Kitkat recovery, not Jellybean so you will have issues if you flash on a Jellybean rom...
ultramag69 said:
Mate, flash Kitkat rom 1st then flash TWRP... Doing anything else is gonna get you in trouble...
2.7.0.1 TWRP has Kitkat recovery, not Jellybean so you will have issues if you flash on a Jellybean rom...
Click to expand...
Click to collapse
Re hello, and always attempts to boot and TWRP stuck on 10.1 NOTE and the red and blue lines jaune.testé logo with flash P605XXUCNE2_P605OXACNE2_P605XXUCNE2_HOME.tarre, boot in download mod and flash TWRP without reboot, then reboot manual recovery (stuck) Same with auto reboot and there is nothing not to have the display of recovery!
I understand you. Are you sure you're not missing anything? It might help to flash stock NEE again. In my case I ticked "Update boot loader", do you mind trying that?
Remember, TWRP is VolUp+Home. It should display colored text in the right upper corner on 2014 logo when booting, if it's entering recovery mode.
Hi,
Solved it is Ok....
Thanks

CWM RECOVERY doesn't work for me on Note 3 with Lollipop

I've used Odin 3.07 to flash n900t-cwm-recovery-6.0.4.4(1025) but it didn't pass. I'm tired now and I want to go to bed but it bugs me I don't have root.
On 4.2 I think it was easy but on 5.0 it won't work for me, now. I've scoured pages and pages, so for now I am kindly asking for some directions.
Try flashing the latest TWRP and then flash supersu from TWRP to get root.
audit13 said:
Try flashing the latest TWRP and then flash supersu from TWRP to get root.
Click to expand...
Click to collapse
Thanks, did it, it flashed it but now it gives me "Recovery is not Seandroid Enforcing". I pulled the battery right after the pass message, no change.
Read in thread about "Reactivation Lock" but I don't have that option in the stock Lollipop 5.0.
Any ideas?
So your phone is not booting? Boot into download mode and tell us what it says.
Oh no, the phone works fine. I can boot into stock Lollipop but it won't boot into recovery (Vol Up). It boots into Odin Vol Down.
All I want is to install su. First I tried to flash CWM recovery with Odin, didn't pass. Then I tried TWRP (their website is down), it passed but got "Recovery is not Seandroid Enforcing" error. So now I'm lost. I think all have to flash a modified ROM but I'm confused about their specs (what is Deoxified)
Wait wait, Oding IS the recovery, no? I'm totally confused now.
Try this: open Odin and uncheck everything except f.reset time, connect the phone, flash TWRP, when you see the word "reset" in the status window, remove USB cable, remove battery, replace battery, use button combination to boot into recovery.
Thanks for the help. I've tried that sequence before. It didn't work. I'll try it again.
But I've managed to install su using Chainfire's Auto Root for Kitkat (but I have Lollipop). Now I have an older recovery. Will that cause any troubles?
What I've learned from my "ordeal" is make sure you have the right versions. In my case particularly the phone model, N900T, and then the software versions, N900TUVUFOB6, where B6 is the Lollipop (right?).
No no no!
I've rebooted into old recovery now my user interface in Lollipop doesn't work. I guess the recovery deleted some cache (noticed some messages at the bottom)
I guess I'll burn the Lollipop + CF Autoroot for the N-th time and never boot into recovery.
Bogdan45 said:
I've used Odin 3.07 to flash n900t-cwm-recovery-6.0.4.4(1025) but it didn't pass. I'm tired now and I want to go to bed but it bugs me I don't have root.
On 4.2 I think it was easy but on 5.0 it won't work for me, now. I've scoured pages and pages, so for now I am kindly asking for some directions.
Click to expand...
Click to collapse
Do you still need help? If so reply back. I'll do way best to help. Had the three main custom recoveries and had my share of problems and learned from them haha.
LiftedDroid said:
Do you still need help? If so reply back. I'll do way best to help. Had the three main custom recoveries and had my share of problems and learned from them haha.
Click to expand...
Click to collapse
Yes, I do need a working recovery for stock Lollipop 5.0 on Note 3.
Bogdan45 said:
Yes, I do need a working recovery for stock Lollipop 5.0 on Note 3.
Click to expand...
Click to collapse
I used chain fires autoroot 9005, and installed TWRP
Sent from my SM-N9005 using Tapatalk
Bogdan45 said:
Yes, I do need a working recovery for stock Lollipop 5.0 on Note 3.
Click to expand...
Click to collapse
Sorry was busy last few days with minecraft lol. I will get that up in a few and have link for you
Hi there,
I have one question. I have rooted my phone with cf-autoroot method same as you and like you I can't installed custom recovery, weather it be TWARP or CWM. Buy my question isn't this.
I was just randomly checking my app manager for all my apps and found getroot version 1.0 was installed.
Can you confirm me that u have the same thing.
Because it has access to my camera SD card and sms.
Let me know.
Sent from my SM-N900W8 using XDA Free mobile app
No, I don't have it.
tenjohn23 said:
Hi there,
I have one question. I have rooted my phone with cf-autoroot method same as you and like you I can't installed custom recovery, weather it be TWARP or CWM. Buy my question isn't this.
I was just randomly checking my app manager for all my apps and found getroot version 1.0 was installed.
Can you confirm me that u have the same thing.
Because it has access to my camera SD card and sms.
Let me know.
Sent from my SM-N900W8 using XDA Free mobile app
Click to expand...
Click to collapse
Make sure you have patched sd access and set correct path for location.
SD patch
Or use this this version of twrp and open in Odin just as you would cf autoroot.
Uploading now
---------- Post added at 01:40 ---------- Previous post was at 01:30 ----------
tenjohn23 said:
Hi there,
I have one question. I have rooted my phone with cf-autoroot method same as you and like you I can't installed custom recovery, weather it be TWARP or CWM. Buy my question isn't this.
I was just randomly checking my app manager for all my apps and found getroot version 1.0 was installed.
Can you confirm me that u have the same thing.
Because it has access to my camera SD card and sms.
Let me know.
Sent from my SM-N900W8 using XDA Free mobile app
Click to expand...
Click to collapse
Make sure you have patched sd access and set correct path for location.
TWRP 2.8.7 Open Recovery
SD patch
Or use this this version of twrp and open in Odin just as you would cf autoroot.
TWRP 2.8.7.0 4.4
Also thesee are for smn900t I am sure as long as your using any snm900* you OK. Any issues try hard reset and last option do reflash of stock
Bogdan45 said:
Oh no, the phone works fine. I can boot into stock Lollipop but it won't boot into recovery (Vol Up). It boots into Odin Vol Down.
All I want is to install su. First I tried to flash CWM recovery with Odin, didn't pass. Then I tried TWRP (their website is down), it passed but got "Recovery is not Seandroid Enforcing" error. So now I'm lost. I think all have to flash a modified ROM but I'm confused about their specs (what is Deoxified)
Wait wait, Oding IS the recovery, no? I'm totally confused now.
Click to expand...
Click to collapse
the enforcing thing is because you have a custom recovery only, it just tells the user that it isn't factory

TWRP 3.2.3 Wont load

Hi! This is my first post so sorry if I posted this in the wrong section. I tried to install TWRP 3.2.3+ on my SGH-M919 and after flashing I get the message "RECOVERY IS NOT SEANDROID ENFORCED" in red and it never boots just stays on the Samsung logo. Meanwhile, when I install 3.0.2 It works fine. I need to use 3.2.3 to install the JDCTeam Pie rom but can't get it to work can someone help? Already tried removing the battery for a couple of minutes.
apple2t4ch said:
Hi! This is my first post so sorry if I posted this in the wrong section. I tried to install TWRP 3.2.3+ on my SGH-M919 and after flashing I get the message "RECOVERY IS NOT SEANDROID ENFORCED" in red and it never boots just stays on the Samsung logo. Meanwhile, when I install 3.0.2 It works fine. I need to use 3.2.3 to install the JDCTeam Pie rom but can't get it to work can someone help? Already tried removing the battery for a couple of minutes.[/QUOI
Did you try updating the TWRP using a zip in TWRP?
Click to expand...
Click to collapse
yoshkapundrick said:
apple2t4ch said:
Hi! This is my first post so sorry if I posted this in the wrong section. I tried to install TWRP 3.2.3+ on my SGH-M919 and after flashing I get the message "RECOVERY IS NOT SEANDROID ENFORCED" in red and it never boots just stays on the Samsung logo. Meanwhile, when I install 3.0.2 It works fine. I need to use 3.2.3 to install the JDCTeam Pie rom but can't get it to work can someone help? Already tried removing the battery for a couple of minutes.[/QUOI
Did you try updating the TWRP using a zip in TWRP?
Click to expand...
Click to collapse
I tried updating from 3.0.2 to 3.2.3 with a image in TWRP and had the same problem. Needless to say disregard what I said previously.
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-s4-tmobile/general/psa-dont-twrp-3-0-2-0-m919-t3781039
apple2t4ch said:
Hi! This is my first post so sorry if I posted this in the wrong section. I tried to install TWRP 3.2.3+ on my SGH-M919 and after flashing I get the message "RECOVERY IS NOT SEANDROID ENFORCED" in red and it never boots just stays on the Samsung logo. Meanwhile, when I install 3.0.2 It works fine. I need to use 3.2.3 to install the JDCTeam Pie rom but can't get it to work can someone help? Already tried removing the battery for a couple of minutes.
Click to expand...
Click to collapse
I know it isn't much help but I tried all TWRP's and the highest I could get was 3.1.1. With that(at least) I got the last official Lineage 14.1 from 2/12/19 to work. Next I'm going to try some of the pie roms.
apple2t4ch said:
Hi! This is my first post so sorry if I posted this in the wrong section. I tried to install TWRP 3.2.3+ on my SGH-M919 and after flashing I get the message "RECOVERY IS NOT SEANDROID ENFORCED" in red and it never boots just stays on the Samsung logo. Meanwhile, when I install 3.0.2 It works fine. I need to use 3.2.3 to install the JDCTeam Pie rom but can't get it to work can someone help? Already tried removing the battery for a couple of minutes.
Click to expand...
Click to collapse
Got GZOSP Pie rom to work. Failed on AICP, AOSP Extended, RR. So GZOSP it is.
---------- Post added at 12:49 AM ---------- Previous post was at 12:16 AM ----------
apple2t4ch said:
Hi! This is my first post so sorry if I posted this in the wrong section. I tried to install TWRP 3.2.3+ on my SGH-M919 and after flashing I get the message "RECOVERY IS NOT SEANDROID ENFORCED" in red and it never boots just stays on the Samsung logo. Meanwhile, when I install 3.0.2 It works fine. I need to use 3.2.3 to install the JDCTeam Pie rom but can't get it to work can someone help? Already tried removing the battery for a couple of minutes.
Click to expand...
Click to collapse
Ok I'm a complete idiot. Here is a custom TWRP 3.3.0.0 that allows the installation of the other roms. It worked on my m919
https://forum.xda-developers.com/ga...p/jdcteam-twrp-3-3-0-0-custom-builds-t3925619

Categories

Resources