[Q] Root for SM-P605 kitkat - Galaxy Note 10.1 (2014 Edition) Q&A, Help & Troubl

Hey
I been looking in the forums, but I havent be able to finde if there is a root for kitkat.
Do anyone know if that is one and if so, can you plz link to the thread
Thaning you in advance

Yes: http://autoroot.chainfire.eu
Although I have a p600 and his method worked fine for JB and KK.

Don't use the P6700/601 cf-autoroot on your P605. It will brick it...
The old cf-autoroot is for JB and doesn't work on KK...
Go to the Original developement thread and look at the TWRP 2.7.0.1 thread. It will supply answers and links...

ultramag69 said:
Don't use the P6700/601 cf-autoroot on your P605. It will brick it...
The old cf-autoroot is for JB and doesn't work on KK...
Go to the Original developement thread and look at the TWRP 2.7.0.1 thread. It will supply answers and links...
Click to expand...
Click to collapse
Hi,
TWRP 2.7.0.1 not work to P605XXUCNE2 !!!
What recovery works?
@+
Pyrana

Root p605kitkat 4.4.2
Hi All, hope I'm posting this is the right forum .Im quite a beginner in Android terms so please be patient with me ...
I have a Galaxy Note 10.1 2014 sm-p605 and use it while travelling , i dont have a computer with me most of the time so i rely on the tablet for most of what i do , yesterday i have updated to android 4.4.2 kitkat , whitout knowing i would loose full access to my 32 Gb SD card...well that made me quite furious as most people...so i decided try rooting it , after backing up all my files i used CF Auto Root ( CF-Auto-Root-lt03lte-lt03ltexx-smp605.zip , well that didnt quite work as i was getting
the boot loopwith the message RECOVERY IS NOT SEANDROID ENFORCING, after much reading i was able to recover the tablet to boot back , no rooting was done but im pretty sure i triggered knox and voided the warranty ....anyway i still want to try getting full access to my SD card, either by rooting it or any other way ,if there is a valid file explorer app without root i am keen to know, or if anyone can show me the way to root this device I will really appreciate.Device Details:
AP605ZSUCNE3
CP: P605ZSUCNE1
csc605OZSUCNE3
KitKat 4.4.2

With all do respect TWRP 2.7.0.1 does work on 4.4.2
I have it working myself.
Now To gain root on 4.4.2, install Autoroot - Chainfire for the SM P905
Then search the forums for a P605 recovery (Its somewhere here)
Youll get full root with original stock recovery. Then flash TWRP 2.7.0.1 and then youll be fine.
Remember the current TWRP version on the main post isnt the correct version...Further into the thread there is the correct version.
Need any help. as per always im on Facebook and Am happy to teamviewer in

fkofilee said:
With all do respect TWRP 2.7.0.1 does work on 4.4.2
I have it working myself.
Now To gain root on 4.4.2, install Autoroot - Chainfire for the SM P905
Then search the forums for a P605 recovery (Its somewhere here)
Youll get full root with original stock recovery. Then flash TWRP 2.7.0.1 and then youll be fine.
Remember the current TWRP version on the main post isnt the correct version...Further into the thread there is the correct version.
Need any help. as per always im on Facebook and Am happy to teamviewer in
Click to expand...
Click to collapse
No need to flash auto root for P905 just flash supersu from recovery TWRP 2.7.0.1 WORKS on 4.4.2!!!!

alex_72gr said:
No need to flash auto root for P905 just flash supersu from recovery TWRP 2.7.0.1 WORKS on 4.4.2!!!!
Click to expand...
Click to collapse
Hi,
Test TWRP 2.7.0.1 and no found !! to Kitkat
Big problem screen fully striped and very difficult to restore! And autoroot is a disaster!

Alan-B said:
Hi,
Test TWRP 2.7.0.1 and no found !! to Kitkat
Big problem screen fully striped and very difficult to restore! And autoroot is a disaster!
Click to expand...
Click to collapse
Mate, you were told cf-autoroot DOESN'T work and will screw things up... Why did you flash over something not working right?
You needed to find the stock recovery first, then flash 2.7.0.1 (not 2.7.0.0) to get TWRP installed. You then flash latest supersu using TWRP. This will root your device and give you a custom recovery..
The only thing is TWRP can't make a backup to the External sd card if you have it formatted exFAT...
Best advice, flash stock rom (kitkat only) again using PC ODIN, try again...

ultramag69 said:
Mate, you were told cf-autoroot DOESN'T work and will screw things up... Why did you flash over something not working right?
You needed to find the stock recovery first, then flash 2.7.0.1 (not 2.7.0.0) to get TWRP installed. You then flash latest supersu using TWRP. This will root your device and give you a custom recovery..
The only thing is TWRP can't make a backup to the External sd card if you have it formatted exFAT...
Click to expand...
Click to collapse
Yep, autoroot for P605 hasnt been updated yet to 4.4.2
Yes you can flash twrp and then SU , I came from the full firmware reflash... I t was the only way to put root on at the time.

Alan-B said:
Hi,
Test TWRP 2.7.0.1 and no found !! to Kitkat
Big problem screen fully striped and very difficult to restore! And autoroot is a disaster!
Click to expand...
Click to collapse
You can follow those links to get what you need.
http://forum.xda-developers.com/showpost.php?p=53236030&postcount=19

alex_72gr said:
You can follow those links to get what you need.
http://forum.xda-developers.com/showpost.php?p=53236030&postcount=19
Click to expand...
Click to collapse
Hi,
Having installed TWRP 2.7.0.1 on P605XXUCNE2 everything planted me! over the boot rom recovery mode and more !!!!
I spent two hours to get to switch back download.J 'thought my Note2 LTE 2014 was dead!
Sorry for the translation, I'm French

Alan-B said:
Hi,
Test TWRP 2.7.0.1 and no found !! to Kitkat
Big problem screen fully striped and very difficult to restore! And autoroot is a disaster!
Click to expand...
Click to collapse
0. If you screwed something up, flashed a wrong recovery, flash the stock rom again. If you are stuck in a boot loop, there is plenty of thread about how to boot into odin mode from there.
1. Download attached TWRP 2.7.0.1, it works with P605. I have it myself.
2. Start the tablet, download SuperSU-v1.99r4.zip, place on SD Card.
3. Reboot into Odin mode, (VolDown+Home), flash TWRP. If your recovery is being restored, don't tick Auto Reboot in Odin and turn off manually after flashing, then boot into TWRP.
4. Boot into TWRP, reset to factory settings. You will be asked if you want Root at some point. I think it's when you reboot, I don't remember.
5. When booted into Android, see if SuperSU downloader app is there. If no - boot TWRP and look around, because you missed something.
If yes, reboot into TWRP again and flash UPDATE-SuperSU-v1.99r4.zip.
Congrats, you are now rooted.

xda_user_p600 said:
0. If you screwed something up, flashed a wrong recovery, flash the stock rom again. If you are stuck in a boot loop, there is plenty of thread about how to boot into odin mode from there.
1. Download attached TWRP 2.7.0.1, it works with P605. I have it myself.
2. Start the tablet, download SuperSU-v1.99r4.zip, place on SD Card.
3. Reboot into Odin mode, (VolDown+Home), flash TWRP. If your recovery is being restored, don't tick Auto Reboot in Odin and turn off manually after flashing, then boot into TWRP.
4. Boot into TWRP, reset to factory settings. You will be asked if you want Root at some point. I think it's when you reboot, I don't remember.
5. When booted into Android, see if SuperSU downloader app is there. If no - boot TWRP and look around, because you missed something.
If yes, reboot into TWRP again and flash UPDATE-SuperSU-v1.99r4.zip.
Congrats, you are now rooted.
Click to expand...
Click to collapse
Re hello,
he problem is that just after the flash TWRP nothing boot! or recovery (zebra screen) and reboot loop and very difficult to switch back to download due to the reboot loop!
Just TWRP 2.7.0.0 works with Version 4.3 Note: The 2.7.0.1 works with 4.3 rom or not ? just to test !
Thank you for the helps

Alan-B said:
Re hello,
he problem is that just after the flash TWRP nothing boot! or recovery (zebra screen) and reboot loop and very difficult to switch back to download due to the reboot loop!
Just TWRP 2.7.0.0 works with Version 4.3 Note: The 2.7.0.1 works with 4.3 rom or not ? just to test !
Thank you for the helps
Click to expand...
Click to collapse
Attached version works with 4.4.2 Nordic.
After you flashed wrong recovery and have "zebra screen", Make sure you flashed stock firmware after that. Don't try flashing anything else before you flash stock.

xda_user_p600 said:
Attached version works with 4.4.2 Nordic.
After you flashed wrong recovery and have "zebra screen", Make sure you flashed stock firmware after that. Don't try flashing anything else before you flash stock.
Click to expand...
Click to collapse
re...
I just tested a flash TWRP from your link, but it boot and stuck on the TAB 10.1 lte logo

Mate, flash Kitkat rom 1st then flash TWRP... Doing anything else is gonna get you in trouble...
2.7.0.1 TWRP has Kitkat recovery, not Jellybean so you will have issues if you flash on a Jellybean rom...

ultramag69 said:
Mate, flash Kitkat rom 1st then flash TWRP... Doing anything else is gonna get you in trouble...
2.7.0.1 TWRP has Kitkat recovery, not Jellybean so you will have issues if you flash on a Jellybean rom...
Click to expand...
Click to collapse
Re hello, and always attempts to boot and TWRP stuck on 10.1 NOTE and the red and blue lines jaune.testé logo with flash P605XXUCNE2_P605OXACNE2_P605XXUCNE2_HOME.tarre, boot in download mod and flash TWRP without reboot, then reboot manual recovery (stuck) Same with auto reboot and there is nothing not to have the display of recovery!

I understand you. Are you sure you're not missing anything? It might help to flash stock NEE again. In my case I ticked "Update boot loader", do you mind trying that?
Remember, TWRP is VolUp+Home. It should display colored text in the right upper corner on 2014 logo when booting, if it's entering recovery mode.

Hi,
Solved it is Ok....
Thanks

Related

[Q]How to install custom rom without softbrick

Hello members,i have a problem . I bought a samsung galaxy tab 3 7.0 wifi (SM-T210) last week and i have rooted it + installed cwm and after i flash anything(custom lock screen or custom rom) the tablet gets soft bricked and the rom dont boot anymore,it enters automaticaly in cwm. So how can i fix it?
d0vada said:
Hello members,i have a problem . I bought a samsung galaxy tab 3 7.0 wifi (SM-T210) last week and i have rooted it + installed cwm and after i flash anything(custom lock screen or custom rom) the tablet gets soft bricked and the rom dont boot anymore,it enters automaticaly in cwm. So how can i fix it?
Click to expand...
Click to collapse
Which recovery Version you are flashed on your tab?
And which root.zip you are used?
Flash Stockrom and try it again.
bierma32 said:
Which recovery Version you are flashed on your tab?
And which root.zip you are used?
Flash Stockrom and try it again.
Click to expand...
Click to collapse
Im using the latest TWRP recovery 2.7.0.0 and for root i use a zip called universal root armeabi *smth like that*
I allready flashed the stockrom 3 times and i got the same result. also im using the T210XXANC2 firmware.
In CWM, wipe data and factory reset. Then go to Download mode, use Odin and flash your stock rom. That should do it.
paranoidmarvin42 said:
In CWM, wipe data and factory reset. Then go to Download mode, use Odin and flash your stock rom. That should do it.
Click to expand...
Click to collapse
i have rooted stock rom running with latest twrp but if i flash a custom rom it wont boot anymore, it gets softbricked but i dont know why.
d0vada said:
i have rooted stock rom running with latest twrp but if i flash a custom rom it wont boot anymore, it gets softbricked but i dont know why.
Click to expand...
Click to collapse
What ROM are you trying to flash? You must have missed a step. Make sure you read the instructions carefully before doing anything and use a custom rom for your device. Try again. I'm also new to Android and has softbricked my tab a couple of times now.
Go back to stock. Let your device boot completely. Install recovery again. Reboot again.
To make it easier, how about watching a video so you can see how it's done properly? It helped me a lot. http://forum.xda-developers.com/showthread.php?t=2459817
Good luck.
paranoidmarvin42 said:
What ROM are you trying to flash? You must have missed a step. Make sure you read the instructions carefully before doing anything and use a custom rom for your device. Try again. I'm also new to Android and has softbricked my tab a couple of times now.
Go back to stock. Let your device boot completely. Install recovery again. Reboot again.
To make it easier, how about watching a video so you can see how it's done properly? It helped me a lot. http://forum.xda-developers.com/showthread.php?t=2459817
Good luck.
Click to expand...
Click to collapse
I want to flash seal rom. also, thanks for the links, i will check them later.
d0vada said:
I want to flash seal rom. also, thanks for the links, i will check them later.
Click to expand...
Click to collapse
Plesse,dont use TWRP , i prefere CWM or PhilzTouch,why : alot of user are have postet probs when they used TWRP.
Also i prefere after rooting The Blackhawk Kernel.
bierma32 said:
Plesse,dont use TWRP , i prefere CWM or PhilzTouch,why : alot of user are have postet probs when they used TWRP.
Also i prefere after rooting The Blackhawk Kernel.
Click to expand...
Click to collapse
So i have flashed (again) the stock firmware from sammobile,i rooted it,installed cwm 6.0.4.7 and then i flashed SEAL rom v4 and its not working. Its like something that doesnt let custom rom boot on my tab. Sad part is that i cant provide a logcat because the android wont boot.
EDIT: Do i have to unlock the bootloader?
d0vada said:
So i have flashed (again) the stock firmware from sammobile,i rooted it,installed cwm 6.0.4.7 and then i flashed SEAL rom v4 and its not working. Its like something that doesnt let custom rom boot on my tab. Sad part is that i cant provide a logcat because the android wont boot.
EDIT: Do i have to unlock the bootloader?
Click to expand...
Click to collapse
Last Try,
Have you flashed The Blackhawk Kernel?
If not , Boot Into recovery, make a full wipe, flash seal ,Blackhawk Kernel ,full wipe again and reboot.
If this all not help ,post your prob at The Rom Thread.
bierma32 said:
Last Try,
Have you flashed The Blackhawk Kernel?
If not , Boot Into recovery, make a full wipe, flash seal ,Blackhawk Kernel ,full wipe again and reboot.
If this all not help ,post your prob at The Rom Thread.
Click to expand...
Click to collapse
I allready tried 3 roms(seal, 4.2.2 beta 2 and inspire) and all goes to the same result. Also, after installing the cwm i flash first the blackhawk kernel and android boots normally (stock rom with custom kernel) but custom rom with or without custom kernel wont boot.
I had similar problem try flashing seal v3.

[Q] Root for Sony T2 ultra Model #D316

I have looked all over and see some threads overlapping other threads, however I am not finding anything for the D5316 Model. I am running Android 4.4.2 Build Number 19.1.A.0.486 The kernel version is from Thu Jul 17 10:07:21 2014. I would like to root and get recovery on it to try a faster rom and get rid of the Sony bloatware. If you have been successful or I missed a link on how to do that please point me in the correct direction...... Thank you in advance.
Kinz1980 said:
I have looked all over and see some threads overlapping other threads, however I am not finding anything for the D5316 Model. I am running Android 4.4.2 Build Number 19.1.A.0.486 The kernel version is from Thu Jul 17 10:07:21 2014. I would like to root and get recovery on it to try a faster rom and get rid of the Sony bloatware. If you have been successful or I missed a link on how to do that please point me in the correct direction...... Thank you in advance.
Click to expand...
Click to collapse
you can try all root methods available i.e giefroot, rootkitxperia, easy root tool, etc. find them in the cross development section
Chena_22 said:
you can try all root methods available i.e giefroot, rootkitxperia, easy root tool, etc. find them in the cross development section
Click to expand...
Click to collapse
EDIT: Apparently, it's working now. All I had to do was reflash the ftf file in flashtool and it was able to keep the custom recovery and boot the phone past it....go figure.
Thanks for posting this, I am having some trouble myself and it's really frustrating. I am able to flash both CWM and TWRP. I am even able to boot into these recoveries but I cannot get the damn thing to boot past it. Pretty sure it's the kernel but I cannot find a place that will tell me step by step as to getting custom recovery on the model of this phone. I am still on 4.4.2. Can you please point me in the right direction?
bor3d2damax said:
EDIT: Apparently, it's working now. All I had to do was reflash the ftf file in flashtool and it was able to keep the custom recovery and boot the phone past it....go figure.
Thanks for posting this, I am having some trouble myself and it's really frustrating. I am able to flash both CWM and TWRP. I am even able to boot into these recoveries but I cannot get the damn thing to boot past it. Pretty sure it's the kernel but I cannot find a place that will tell me step by step as to getting custom recovery on the model of this phone. I am still on 4.4.2. Can you please point me in the right direction?
Click to expand...
Click to collapse
So you were able to root your d5316?
Kinz1980 said:
So you were able to root your d5316?
Click to expand...
Click to collapse
Yes I was! I can get you the instructions if you want.
bor3d2damax said:
Yes I was! I can get you the instructions if you want.
Click to expand...
Click to collapse
Yes, please do! Also did you get recovery figured out? I am wanting to use xposed.
Kinz1980 said:
Yes, please do! Also did you get recovery figured out? I am wanting to use xposed.
Click to expand...
Click to collapse
Yes,
Basically what you have to do is download Dual Recovery and put it on your SD card or internal storage on the phone. Download Supersu 2.40 and do the same thing. Then go to the CWM recovery thread and download that. Follow the instructions there. Once you finish following the instructions just boot into CWM recovery, then flash Dual Recovery. Reboot the phone and wait until you see the green light. Press the down key once you see the green light. It should take you into TWRP. After that flash Super Su and then you reboot and let it boot all the way, done. Make sure you are bootloader unlocked and have working ADB AND FASTBOOT on your PC
bor3d2damax said:
Yes,
Basically what you have to do is download Dual Recovery and put it on your SD card or internal storage on the phone. Download Supersu 2.40 and do the same thing. Then go to the CWM recovery thread and download that. Follow the instructions there. Once you finish following the instructions just boot into CWM recovery, then flash Dual Recovery. Reboot the phone and wait until you see the green light. Press the down key once you see the green light. It should take you into TWRP. After that flash Super Su and then you reboot and let it boot all the way, done. Make sure you are bootloader unlocked and have working ADB AND FASTBOOT on your PC
Click to expand...
Click to collapse
Let's back up for a second.....
Give me a breakdown one more time from the very beginning.
1.unlock the bootloader
2. Download "dual recovery"and place on sd card
3. Download superuser and place on sd card
4. Install cwm recovery
5. Flash the dual recovery.....why? Is there something wrong with cwm?
6.Flash superuser
At what point is the phone rooted? Does flashing SU do that? I have used tools in the past on other phones. This is my first Sony phone.
If you care to, or the time to...could you please paste the links to each step (assuming I have them all correct or I am not missing something)
I really appreciate you helping this much I was ready to give up on this phone, cause I couldn't get any help! :what::banghead:
just the topic I was looking for!
mind if I follow this? I just bought this phone yesterday. Looking for a way to get Lollipop on it.
I was hoping to get a reply by now. Which model# do you have
I just flashed FXP ASOP 2/23 after I was able to get 2/08 running on the device and now the device won't boot past the android logo. I can get it flashboot mode and rewrite the 3 imgs (boot, system, and user data) however it still won't boot.
Any Ideas?
hoonu said:
I just flashed FXP ASOP 2/23 after I was able to get 2/08 running on the device and now the device won't boot past the android logo. I can get it flashboot mode and rewrite the 3 imgs (boot, system, and user data) however it still won't boot.
Any Ideas?
Click to expand...
Click to collapse
I am just trying to get root and recovery
I was able to get root by doing the following.
Flash the cwm boot.img. You will not be able to boot android but you will be able to boot to recovery.
Flash the dual recovery from cwm. Go ahead and flash supersu zip as well.
Reboot. Wait till you see the green light (not pink) flash and press the volume down button to boot to twrp or volume up to boot phils recovery.
I used twrp. Once in TWRP, I flashed the rooted stock firmware (mainly to restore a fully working boot.img), and reflashed dual recovery from twrp. Also flash the newest supersu zip.
Maybe a easier way, but worked for me.

[Q] TWRP on Note 10.1 2014 WiFi - Touchscreen not working

I installed TWRP on my Note 10.1 2014 through the play store app. Once I installed the recovery image, I tried rebooting into recovery and it would only boot to the OS.
I went into the app and rebooted to recovery from there and it did go into TWRP, however, there is no response on the touchscreen or any other button but power, which causes it to reboot back into TWRP.
I haven't been able to find a way to get back to the OS or do anything else.
Can anybody help me out? I'm very new to this, I had it rooted and tripped the warranty bit a while back but that's all I've done. I just want to upgrade to KK, which I can't do since the warranty bit has been tripped. (I'll go to Lollipop if I can, but I have a few apps I want that need at least KitKat.)
Thanks in advance for any help you can provide!!
2.8.7.0?
Sent from my SCH-R530U using Tapatalk
Orion116 said:
2.8.7.0?
Sent from my SCH-R530U using Tapatalk
Click to expand...
Click to collapse
Yes, it was 2.8.7.0. After doing some more searching, I found out how to flash TWRP with Odin and got 2.8.6.0 working. I now have it fixed running Lollipop.
jbrewer8 said:
Yes, it was 2.8.7.0. After doing some more searching, I found out how to flash TWRP with Odin and got 2.8.6.0 working. I now have it fixed running Lollipop.
Click to expand...
Click to collapse
Thank you sir. Exactly the same problem here: No touchscreen on SM-P600, stuck on recovery boot loop, and had to flash TWRP through ODIN to get out. Now in 2.8.6.0 and everything is working now.
Hi.
Anybody could tell me how solve this problem?. Me too installed TWRP 2.8.7.0 in my Samsun SM-P600 but touchscreen does not work. Shutdown the tablet doesn't work, only return to TWRP.
Ashade mentioned: "had to flash TWRP through ODIN", but, if there is a guide let me know, because I don't wanna break my tablet more.
This of root and flash is new for me.
sanyick said:
Hi.
Anybody could tell me how solve this problem?. Me too installed TWRP 2.8.7.0 in my Samsun SM-P600 but touchscreen does not work. Shutdown the tablet doesn't work, only return to TWRP.
Ashade mentioned: "had to flash TWRP through ODIN", but, if there is a guide let me know, because I don't wanna break my tablet more.
This of root and flash is new for me.
Click to expand...
Click to collapse
Go here and read thread #6 and #7. After you flashed twrp 2.8.7.0, you need to use your spen to navigate and it's very sensitive so be careful not to click on the wrong option. Good luck.
http://forum.xda-developers.com/gal...-easily-root-modifying-kernel-how-to-t3242644
Ashade said:
Thank you sir. Exactly the same problem here: No touchscreen on SM-P600, stuck on recovery boot loop, and had to flash TWRP through ODIN to get out. Now in 2.8.6.0 and everything is working now.
Click to expand...
Click to collapse
There is a version of 2.8.7.0 with fully working touch and other tweaks. This one: https://basketbuild.com/devs/Joshndroid/TWRP/lt03wifi which is compiled to support F2FS, but works just fine.
Thanks all... I never thought to use the Spen. I gonna follow your tips. regards.
buhohitr said:
Go here and read thread #6 and #7. After you flashed twrp 2.8.7.0, you need to use your spen to navigate and it's very sensitive so be careful not to click on the wrong option. Good luck.
http://forum.xda-developers.com/gal...-easily-root-modifying-kernel-how-to-t3242644
Click to expand...
Click to collapse
I stuck on it for almost half an hour keep on reflash different version twrp..hahahaha..
thank for your help. bro happy new year

CWM RECOVERY doesn't work for me on Note 3 with Lollipop

I've used Odin 3.07 to flash n900t-cwm-recovery-6.0.4.4(1025) but it didn't pass. I'm tired now and I want to go to bed but it bugs me I don't have root.
On 4.2 I think it was easy but on 5.0 it won't work for me, now. I've scoured pages and pages, so for now I am kindly asking for some directions.
Try flashing the latest TWRP and then flash supersu from TWRP to get root.
audit13 said:
Try flashing the latest TWRP and then flash supersu from TWRP to get root.
Click to expand...
Click to collapse
Thanks, did it, it flashed it but now it gives me "Recovery is not Seandroid Enforcing". I pulled the battery right after the pass message, no change.
Read in thread about "Reactivation Lock" but I don't have that option in the stock Lollipop 5.0.
Any ideas?
So your phone is not booting? Boot into download mode and tell us what it says.
Oh no, the phone works fine. I can boot into stock Lollipop but it won't boot into recovery (Vol Up). It boots into Odin Vol Down.
All I want is to install su. First I tried to flash CWM recovery with Odin, didn't pass. Then I tried TWRP (their website is down), it passed but got "Recovery is not Seandroid Enforcing" error. So now I'm lost. I think all have to flash a modified ROM but I'm confused about their specs (what is Deoxified)
Wait wait, Oding IS the recovery, no? I'm totally confused now.
Try this: open Odin and uncheck everything except f.reset time, connect the phone, flash TWRP, when you see the word "reset" in the status window, remove USB cable, remove battery, replace battery, use button combination to boot into recovery.
Thanks for the help. I've tried that sequence before. It didn't work. I'll try it again.
But I've managed to install su using Chainfire's Auto Root for Kitkat (but I have Lollipop). Now I have an older recovery. Will that cause any troubles?
What I've learned from my "ordeal" is make sure you have the right versions. In my case particularly the phone model, N900T, and then the software versions, N900TUVUFOB6, where B6 is the Lollipop (right?).
No no no!
I've rebooted into old recovery now my user interface in Lollipop doesn't work. I guess the recovery deleted some cache (noticed some messages at the bottom)
I guess I'll burn the Lollipop + CF Autoroot for the N-th time and never boot into recovery.
Bogdan45 said:
I've used Odin 3.07 to flash n900t-cwm-recovery-6.0.4.4(1025) but it didn't pass. I'm tired now and I want to go to bed but it bugs me I don't have root.
On 4.2 I think it was easy but on 5.0 it won't work for me, now. I've scoured pages and pages, so for now I am kindly asking for some directions.
Click to expand...
Click to collapse
Do you still need help? If so reply back. I'll do way best to help. Had the three main custom recoveries and had my share of problems and learned from them haha.
LiftedDroid said:
Do you still need help? If so reply back. I'll do way best to help. Had the three main custom recoveries and had my share of problems and learned from them haha.
Click to expand...
Click to collapse
Yes, I do need a working recovery for stock Lollipop 5.0 on Note 3.
Bogdan45 said:
Yes, I do need a working recovery for stock Lollipop 5.0 on Note 3.
Click to expand...
Click to collapse
I used chain fires autoroot 9005, and installed TWRP
Sent from my SM-N9005 using Tapatalk
Bogdan45 said:
Yes, I do need a working recovery for stock Lollipop 5.0 on Note 3.
Click to expand...
Click to collapse
Sorry was busy last few days with minecraft lol. I will get that up in a few and have link for you
Hi there,
I have one question. I have rooted my phone with cf-autoroot method same as you and like you I can't installed custom recovery, weather it be TWARP or CWM. Buy my question isn't this.
I was just randomly checking my app manager for all my apps and found getroot version 1.0 was installed.
Can you confirm me that u have the same thing.
Because it has access to my camera SD card and sms.
Let me know.
Sent from my SM-N900W8 using XDA Free mobile app
No, I don't have it.
tenjohn23 said:
Hi there,
I have one question. I have rooted my phone with cf-autoroot method same as you and like you I can't installed custom recovery, weather it be TWARP or CWM. Buy my question isn't this.
I was just randomly checking my app manager for all my apps and found getroot version 1.0 was installed.
Can you confirm me that u have the same thing.
Because it has access to my camera SD card and sms.
Let me know.
Sent from my SM-N900W8 using XDA Free mobile app
Click to expand...
Click to collapse
Make sure you have patched sd access and set correct path for location.
SD patch
Or use this this version of twrp and open in Odin just as you would cf autoroot.
Uploading now
---------- Post added at 01:40 ---------- Previous post was at 01:30 ----------
tenjohn23 said:
Hi there,
I have one question. I have rooted my phone with cf-autoroot method same as you and like you I can't installed custom recovery, weather it be TWARP or CWM. Buy my question isn't this.
I was just randomly checking my app manager for all my apps and found getroot version 1.0 was installed.
Can you confirm me that u have the same thing.
Because it has access to my camera SD card and sms.
Let me know.
Sent from my SM-N900W8 using XDA Free mobile app
Click to expand...
Click to collapse
Make sure you have patched sd access and set correct path for location.
TWRP 2.8.7 Open Recovery
SD patch
Or use this this version of twrp and open in Odin just as you would cf autoroot.
TWRP 2.8.7.0 4.4
Also thesee are for smn900t I am sure as long as your using any snm900* you OK. Any issues try hard reset and last option do reflash of stock
Bogdan45 said:
Oh no, the phone works fine. I can boot into stock Lollipop but it won't boot into recovery (Vol Up). It boots into Odin Vol Down.
All I want is to install su. First I tried to flash CWM recovery with Odin, didn't pass. Then I tried TWRP (their website is down), it passed but got "Recovery is not Seandroid Enforcing" error. So now I'm lost. I think all have to flash a modified ROM but I'm confused about their specs (what is Deoxified)
Wait wait, Oding IS the recovery, no? I'm totally confused now.
Click to expand...
Click to collapse
the enforcing thing is because you have a custom recovery only, it just tells the user that it isn't factory

[ROM] MOAR MM Rom v4.1 - Toasted Edition - 07/22/2016

Not my work but it works now.
How to
Reboot in recovery
Wipe device
Flash Rom and kernel:
Download for rom:
Flash this after:
Reboot
Recommend using twrp 3.0.0.1
what about the hardware keys? do they work with moar rom and this kernel or do we need virtual hardware keys?
FingerBlastJ said:
what about the hardware keys? do they work with moar rom and this kernel or do we need virtual hardware keys?
Click to expand...
Click to collapse
Kernel fixes hardware issues
and if I'm on note 5 moar rom with patch.... no issue flashing right?
Sky-high made us a kernel? Sweet sadistic smiles, success! So happy. Anyone know if it'll work like the LP patch did for note roms, or does more need to happen first? Or do people just need to start trying and report back?
-edit-
Clicked the link and saw it was a note 5 Rom. What can I say, I was excited!
Blzfrost said:
Sky-high made us a kernel? Sweet sadistic smiles, success! So happy. Anyone know if it'll work like the LP patch did for note roms, or does more need to happen first? Or do people just need to start trying and report back?
-edit-
Clicked the link and saw it was a note 5 Rom. What can I say, I was excited!
Click to expand...
Click to collapse
Just flash Rom and kernel everything will work.
MonkeyAround said:
Just flash Rom and kernel everything will work.
Click to expand...
Click to collapse
Oh I'm setting everything up right now for the flash! I'm so excited. Once I realized you linked to a note 5 Rom most of my questions got answered. My favorite part, the kernel was posted on my bday.
i tried wiping and clearing cache then flashing the rom and the kernel. nothing actually happens to my phone. i end up on the same home screen and apps i had installed on moar 5.1.1 with note 5 patch.
any ideas why wiping my phone doesnt work on twrp 3.0.0.0?
FingerBlastJ said:
i tried wiping and clearing cache then flashing the rom and the kernel. nothing actually happens to my phone. i end up on the same home screen and apps i had installed on moar 5.1.1 with note 5 patch.
any ideas why wiping my phone doesnt work on twrp 3.0.0.0?
Click to expand...
Click to collapse
Update your TWRP.
https://dl.twrp.me/zenltespr/
yea I tried doing that with Odin and it would freeze mid way. I also tried flashing a twrp update zip file on twrp and that didn't work either.
you think I should flash with flash fire?
bricked my phone by trying to flash newer version of twrp with twrp manager
been trying to flash unbrick tar and pit file to get back up and running but its not working.
any help is much appreciated
fixed the brick by flashing new recovery in Odin, now on 3.0.2. still can't get the phone to wipe out install new rom and kernel
FingerBlastJ said:
fixed the brick by flashing new recovery in Odin, now on 3.0.2. still can't get the phone to wipe out install new rom and kernel
Click to expand...
Click to collapse
Have you checked for root with root checker? I have lost root access a few times in the past?
yea I just checked with root checker and I have root access.
I've never had this happen to me... weird
anything else you can think of?
FingerBlastJ said:
yea I just checked with root checker and I have root access.
I've never had this happen to me... weird
anything else you can think of?
Click to expand...
Click to collapse
Last thing I can think of is when opening TWRP the first time. It asks if you want to make the system 'read only'. Did you select No?
I never got that message when I flashed twrp 3.0.2 to unblock... how do I make it show up?
FingerBlastJ said:
I never got that message when I flashed twrp 3.0.2 to unblock... how do I make it show up?
Click to expand...
Click to collapse
Not sure. You can click mount and see what is mounted. I am not sure that will work. I am not sure exactly what you are trying to wipe, but mount the items you are attempting to wipe and make sure the read-only is unchecked.
Try this:
Check to see if oem is checked
Re-root via root tar/odin
twrp 3.0.0.1 from edge files post in general
Backup stock
Wipe
Flash Moar
Don't reboot
Flash skyhigh kernel
Flash xposed(don't have to)
Reboot
Allow it to boot loop a couple time (from sky kernel)
Give 5-10 minutes to boot
I just did it with no issues and I've personally had more luck with 3.0.0.1 than any of the others.
heres my issue...twrp doesnt do anything for me (all versions) whether i wipe or install
so i used flashfire to flash the rom and the kernel at once and it finally displayed aroma installer (wouldnt get that in twrp)
however, after it in stalled i got stuck on boot screen
the only fix for this was flashing unbrick aok3 tar file which brought me to stock
i put on twrp as a recovery again starting fresh unrooted and it still doesnt respond to any of my commands
i think i will try flash fire on stock one more time and see what happens since its the only thing that is responding
FingerBlastJ said:
heres my issue...twrp doesnt do anything for me (all versions) whether i wipe or install
so i used flashfire to flash the rom and the kernel at once and it finally displayed aroma installer (wouldnt get that in twrp)
however, after it in stalled i got stuck on boot screen
the only fix for this was flashing unbrick aok3 tar file which brought me to stock
i put on twrp as a recovery again starting fresh unrooted and it still doesnt respond to any of my commands
i think i will try flash fire on stock one more time and see what happens since its the only thing that is responding
Click to expand...
Click to collapse
Your on Lp bootloader that's your issue.
Download Marshmallow tar from the general post I made for rooting Bpg1.
Flash tar and follow post.
twrp. 3.0.x.x is more for marshmallow. You need to be on 6.0.1 not 5.1.1.
Don't use fireflash on this device.
Fireflash is more for phones with locked bootloaders like Verizon s4 on the of1 update.
Fireflash isn't really up to date with our phone and could easily brick your device.

Categories

Resources