I installed TWRP on my Note 10.1 2014 through the play store app. Once I installed the recovery image, I tried rebooting into recovery and it would only boot to the OS.
I went into the app and rebooted to recovery from there and it did go into TWRP, however, there is no response on the touchscreen or any other button but power, which causes it to reboot back into TWRP.
I haven't been able to find a way to get back to the OS or do anything else.
Can anybody help me out? I'm very new to this, I had it rooted and tripped the warranty bit a while back but that's all I've done. I just want to upgrade to KK, which I can't do since the warranty bit has been tripped. (I'll go to Lollipop if I can, but I have a few apps I want that need at least KitKat.)
Thanks in advance for any help you can provide!!
2.8.7.0?
Sent from my SCH-R530U using Tapatalk
Orion116 said:
2.8.7.0?
Sent from my SCH-R530U using Tapatalk
Click to expand...
Click to collapse
Yes, it was 2.8.7.0. After doing some more searching, I found out how to flash TWRP with Odin and got 2.8.6.0 working. I now have it fixed running Lollipop.
jbrewer8 said:
Yes, it was 2.8.7.0. After doing some more searching, I found out how to flash TWRP with Odin and got 2.8.6.0 working. I now have it fixed running Lollipop.
Click to expand...
Click to collapse
Thank you sir. Exactly the same problem here: No touchscreen on SM-P600, stuck on recovery boot loop, and had to flash TWRP through ODIN to get out. Now in 2.8.6.0 and everything is working now.
Hi.
Anybody could tell me how solve this problem?. Me too installed TWRP 2.8.7.0 in my Samsun SM-P600 but touchscreen does not work. Shutdown the tablet doesn't work, only return to TWRP.
Ashade mentioned: "had to flash TWRP through ODIN", but, if there is a guide let me know, because I don't wanna break my tablet more.
This of root and flash is new for me.
sanyick said:
Hi.
Anybody could tell me how solve this problem?. Me too installed TWRP 2.8.7.0 in my Samsun SM-P600 but touchscreen does not work. Shutdown the tablet doesn't work, only return to TWRP.
Ashade mentioned: "had to flash TWRP through ODIN", but, if there is a guide let me know, because I don't wanna break my tablet more.
This of root and flash is new for me.
Click to expand...
Click to collapse
Go here and read thread #6 and #7. After you flashed twrp 2.8.7.0, you need to use your spen to navigate and it's very sensitive so be careful not to click on the wrong option. Good luck.
http://forum.xda-developers.com/gal...-easily-root-modifying-kernel-how-to-t3242644
Ashade said:
Thank you sir. Exactly the same problem here: No touchscreen on SM-P600, stuck on recovery boot loop, and had to flash TWRP through ODIN to get out. Now in 2.8.6.0 and everything is working now.
Click to expand...
Click to collapse
There is a version of 2.8.7.0 with fully working touch and other tweaks. This one: https://basketbuild.com/devs/Joshndroid/TWRP/lt03wifi which is compiled to support F2FS, but works just fine.
Thanks all... I never thought to use the Spen. I gonna follow your tips. regards.
buhohitr said:
Go here and read thread #6 and #7. After you flashed twrp 2.8.7.0, you need to use your spen to navigate and it's very sensitive so be careful not to click on the wrong option. Good luck.
http://forum.xda-developers.com/gal...-easily-root-modifying-kernel-how-to-t3242644
Click to expand...
Click to collapse
I stuck on it for almost half an hour keep on reflash different version twrp..hahahaha..
thank for your help. bro happy new year
Related
I heard that data mounting is broken and can't seem to find a file for it...I want kitkat
So...the questions are:
Where can I download it?
Is data mounting broken?and what do they mean by "data mounting?" Am I better off waiting for a new fixed version of twrp? Possibly 2.6.3.2 will be out soon?
bumping for answers. Im looking for the latest TWRP as well.
djkozdefantastico said:
bumping for answers. Im looking for the latest TWRP as well.
Click to expand...
Click to collapse
Thanks for the bump.I really want kitkat on my fire as I haven't got it on my nexus 7 2013 or obviously my 2012 nexus 7 that doesn't respond to touch...
I actually haven't heard anything about the data mounting being broken. I just flashed the newest version with flashify. And I'm running CM11 now.
Flashify
https://play.google.com/store/apps/details?id=com.cgollner.flashify
The latest TWRP
http://techerrata.com/file/twrp2/blaze/openrecovery-twrp-2.6.3.1-otter.img
After installing TWRP, I flashed the rom and gapps which i got here.
http://forum.xda-developers.com/showthread.php?t=2397942
Hope this helps
VTCruzer said:
I actually haven't heard anything about the data mounting being broken. I just flashed the newest version with flashify. And I'm running CM11 now.
Flashify
https://play.google.com/store/apps/details?id=com.cgollner.flashify
The latest TWRP
http://techerrata.com/file/twrp2/blaze/openrecovery-twrp-2.6.3.1-otter.img
After installing TWRP, I flashed the rom and gapps which i got here.
http://forum.xda-developers.com/showthread.php?t=2397942
Hope this helps
Click to expand...
Click to collapse
I usually flash twrp in twrp.
Jacobloveskindles said:
I usually flash twrp in twrp.
Click to expand...
Click to collapse
You can flash a recovery in a recovery?
VTCruzer said:
You can flash a recovery in a recovery?
Click to expand...
Click to collapse
I did that with my upgrade from 2.2.2.1 to 2.5.0...
Jacobloveskindles said:
I heard that data mounting is broken and can't seem to find a file for it...I want kitkat
So...the questions are:
Where can I download it?
Is data mounting broken?and what do they mean by "data mounting?" Am I better off waiting for a new fixed version of twrp? Possibly 2.6.3.2 will be out soon?
Click to expand...
Click to collapse
You are correct. Data mounting is broken for me and some others on the KF Sub-Forum. So if I were you, I would wait about a month or 2. If you can't, oh well. You were warned
EDIT: Made a guide. Flash TWRP first but if you have problems with it after you install it like I had (data mount errors), then follow this guide to fix it.
cant get newer twrp to work
I am having trouble with getting the newer versions of twrp to boot up correctly. I have manually flashed all the most recent versions of TWRP with command prompt, I even used flashify but every version would either freeze at the teamwin logo or would not boot into recovery at all. I went down the list (downloaded and installed each version) and the only version of twrp that would work on my kindle is 2.4.0. Even after doing this, I cant seem to get passed the boot animation when flashing roms, the boot animation is off centered and cut off to the top right. The boot animation would play then freeze then would start a boot loop. I wiped all data, cache and everything else needed before and after flashing the rom but no results. Can someone please help me out?
VTCruzer said:
I actually haven't heard anything about the data mounting being broken. I just flashed the newest version with flashify. And I'm running CM11 now.
Flashify
https://play.google.com/store/apps/details?id=com.cgollner.flashify
The latest TWRP
http://techerrata.com/file/twrp2/blaze/openrecovery-twrp-2.6.3.1-otter.img
After installing TWRP, I flashed the rom and gapps which i got here.
http://forum.xda-developers.com/showthread.php?t=2397942
Hope this helps
Click to expand...
Click to collapse
Flashify did the trick... Thanks a lot!
Okay, I'm stressed. This is not how I planned it, I'll try to keep it short:
Wanted to do a full clean install of this:
http://forum.xda-developers.com/showthread.php?t=2504016
So what I did:
-Used odin (bootloader) to flash mj5
-Used odin (pda) to flash twrp
-Used twrp to flash rom
-Realised I forgot to wipe, so wiped everything, then wiped media seperate (enter yes to continue) then my N2 rebooted.
Now it's stuck in a boot loop. Teamwin screen keeps flashing every 5 seconds, never going into it.
-Re-flashed twrp via odin, didn't help.
Rom doesn't boot either, bootloop at samsung logo.
**** this is so not good for my stress levels
I have no clue how I broke twrp because I even re-flashed it via odin and still bootloop
Download mode still works thank ****
Okay good news, flashed philz recovery and works! Very happy that I have some sort of recovery back. Now flashing rom, hopefully it boots.
-First boot going on. Very happy now. Sorry for opening this thread, I get REALLY stressed REALLY fast. Once the rom is done booting (which looks like it's going to happen) this thread is not useful anymore, sorry!
-Booting for a few minutes now, stess level is rising...
-Still booting... damn!
Delano.888 said:
Okay good news, flashed philz recovery and works! Very happy that I have some sort of recovery back. Now flashing rom, hopefully it boots.
-First boot going on. Very happy now. Sorry for opening this thread, I get REALLY stressed REALLY fast. Once the rom is done booting (which looks like it's going to happen) this thread is not useful anymore, sorry!
-Booting for a few minutes now, stess level is rising...
-Still booting... damn!
Click to expand...
Click to collapse
Re do the wipes via philz recovery,go under advanced wipe dalvik cache,go and wipe cache partition , then finally "wipe data/factory rest" clean to install new rom,then don't reboot your system cause it won't boot since there's no ROM on it just flash the ROM
singhpratik87 said:
Re do the wipes via philz recovery,go under advanced wipe dalvik cache,go and wipe cache partition , then finally "wipe data/factory rest" clean to install new rom,then don't reboot your system cause it won't boot since there's no ROM on it just flash the ROM
Click to expand...
Click to collapse
I did a full factory reset clean wipe, it does everything for a new rom. Then I flash rom and boot, but booting takes really long. Tried twice, still busy booting second time now 13 minutes...
Didn't do caches last time, I'll try again.
Delano.888 said:
I did a full factory reset clean wipe, it does everything for a new rom. Then I flash rom and boot, but booting takes really long. Tried twice, still busy booting second time now 13 minutes...
Didn't do caches last time, I'll try again.
Click to expand...
Click to collapse
Which philz version are you using?6.25/6.26 is recommended and this other user in DN3 thread couldnt get the rom to boot either by trying latest versions of recovery he used an older version of twrp which is 2.6.3.1/2 and it booted for him.Sometimes recoveries act up for no reason
singhpratik87 said:
Which philz version are you using?6.25/6.26 is recommended and this other user in DN3 thread couldnt get the rom to boot either by trying latest versions of recovery he used an older version of twrp which is 2.6.3.1/2 and it booted for him.Sometimes recoveries act up for no reason
Click to expand...
Click to collapse
philz 5.00, didn't find any newer? that's the problem?
Is this not the latest?:
http://forum.xda-developers.com/showthread.php?t=2028103
Delano.888 said:
philz 5.00, didn't find any newer? that's the problem?
Is this not the latest?:
http://forum.xda-developers.com/showthread.php?t=2028103
Click to expand...
Click to collapse
That's the MAIN culprit my friend i'll link you up with the latest philz
Philz
Download the .tar file put the phone into download mode and flash this recovery via odin using the pda tab
singhpratik87 said:
That's the MAIN culprit my friend i'll link you up with the latest philz
Philz
Download the .tar file put the phone into download mode and flash this recovery via odin using the pda tab
Click to expand...
Click to collapse
Thanks. Got new philz and now installing rom third time.
However I didn't see this anywhere?
8) Now go to choose to install the rom zip file. If you using Philz recovery, make sure to untick "Don't Allow Old update-binary" if this option is avalaible.
Not important? Because didn't see it..
Delano.888 said:
Thanks. Got new philz and now installing rom third time.
However I didn't see this anywhere?
8) Now go to choose to install the rom zip file. If you using Philz recovery, make sure to untick "Don't Allow Old update-binary" if this option is avalaible.
Not important? Because didn't see it..
Click to expand...
Click to collapse
You wont see that line on 6.2.5/6.26 it was only seen on 6.19.2
singhpratik87 said:
You wont see that line on 6.2.5/6.26 it was only seen on 6.19.2
Click to expand...
Click to collapse
Okay thanks. Rom seems to be booting again. Really hope it works now!
edit: still booting, seems to not work again
Delano.888 said:
Okay thanks. Rom seems to be booting again. Really hope it works now!
edit: still booting, seems to not work again
Click to expand...
Click to collapse
Try with twrp 2.6.3.2 ,i know this is annoying that one needs to juggle between recoveries to get a rom to work
Shouldn't take more than 10 minutes for ROM to boot
singhpratik87 said:
Try with twrp 2.6.3.2 ,i know this is annoying that one needs to juggle between recoveries to get a rom to work
Shouldn't take more than 10 minutes for ROM to boot
Click to expand...
Click to collapse
Not 2.7.0.2?
Delano.888 said:
Not 2.7.0.2?
Click to expand...
Click to collapse
You can try like i said it's just trial and error which recovery works,so 2.7.0.2 and then if not work try with 2.6.3.1/2
singhpratik87 said:
You can try like i said it's just trial and error which recovery works,so 2.7.0.2 and then if not work try with 2.6.3.1/2
Click to expand...
Click to collapse
I have NO CLUE what just happened.
I flashed twrp, and it rebooted. Recovery didn't boot, but phone booted right away! Rom is now on. Guess it's okay now.
Thanks for the help!
Delano.888 said:
I have NO CLUE what just happened.
I flashed twrp, and it rebooted. Recovery didn't boot, but phone booted right away! Rom is now on. Guess it's okay now.
Thanks for the help!
Click to expand...
Click to collapse
LOL ,told you ,recoveries can be very annoying at times.Now enjoy the ROM.If you face any issues use the search button in the DN3 thread or read the FAQ in the first page i think it's the 4th post there.Good luck
singhpratik87 said:
LOL ,told you ,recoveries can be very annoying at times.Now enjoy the ROM.If you face any issues use the search button in the DN3 thread or read the FAQ in the first page i think it's the 4th post there.Good luck
Click to expand...
Click to collapse
Very strange how that happened but everything is good now. Thank you very much!
@Delano.888 this is why I NEVER use ODIN, it Just screws your phone up. TWRP FTW for me.
N7105 rocking AOSB with AGNi kernel,
Sent from a small country named Singapore.
Click "Thanks" if I was of any help!
Irwenzhao said:
@Delano.888 this is why I NEVER use ODIN, it Just screws your phone up. TWRP FTW for me.
N7105 rocking AOSB with AGNi kernel,
Sent from a small country named Singapore.
Click "Thanks" if I was of any help!
Click to expand...
Click to collapse
I don't think it was the fault of odin because I got it working later but the rom has many problems so I guess the rom is just broken. No time today but I'll change my rom soon.
Irwenzhao said:
@Delano.888 this is why I NEVER use ODIN, it Just screws your phone up. TWRP FTW for me.
N7105 rocking AOSB with AGNi kernel,
Sent from a small country named Singapore.
Click "Thanks" if I was of any help!
Click to expand...
Click to collapse
Gr8 advice, hope that not too many read this and trust in it. :fingers-crossed:
Delano.888 said:
I don't think it was the fault of odin because I got it working later but the rom has many problems so I guess the rom is just broken. No time today but I'll change my rom soon.
Click to expand...
Click to collapse
Androidwizzard said:
Gr8 advice, hope that not too many read this and trust in it. :fingers-crossed:
Click to expand...
Click to collapse
ODIN is pure unreliable for me. I'm still using a version of TWRP I got last year and it's still more reliable than cwm or any other recovery.
N7105 rocking AOSB with AGNi kernel,
Sent from a small country named Singapore.
Click "Thanks" if I was of any help!
Hey
I been looking in the forums, but I havent be able to finde if there is a root for kitkat.
Do anyone know if that is one and if so, can you plz link to the thread
Thaning you in advance
Yes: http://autoroot.chainfire.eu
Although I have a p600 and his method worked fine for JB and KK.
Don't use the P6700/601 cf-autoroot on your P605. It will brick it...
The old cf-autoroot is for JB and doesn't work on KK...
Go to the Original developement thread and look at the TWRP 2.7.0.1 thread. It will supply answers and links...
ultramag69 said:
Don't use the P6700/601 cf-autoroot on your P605. It will brick it...
The old cf-autoroot is for JB and doesn't work on KK...
Go to the Original developement thread and look at the TWRP 2.7.0.1 thread. It will supply answers and links...
Click to expand...
Click to collapse
Hi,
TWRP 2.7.0.1 not work to P605XXUCNE2 !!!
What recovery works?
@+
Pyrana
Root p605kitkat 4.4.2
Hi All, hope I'm posting this is the right forum .Im quite a beginner in Android terms so please be patient with me ...
I have a Galaxy Note 10.1 2014 sm-p605 and use it while travelling , i dont have a computer with me most of the time so i rely on the tablet for most of what i do , yesterday i have updated to android 4.4.2 kitkat , whitout knowing i would loose full access to my 32 Gb SD card...well that made me quite furious as most people...so i decided try rooting it , after backing up all my files i used CF Auto Root ( CF-Auto-Root-lt03lte-lt03ltexx-smp605.zip , well that didnt quite work as i was getting
the boot loopwith the message RECOVERY IS NOT SEANDROID ENFORCING, after much reading i was able to recover the tablet to boot back , no rooting was done but im pretty sure i triggered knox and voided the warranty ....anyway i still want to try getting full access to my SD card, either by rooting it or any other way ,if there is a valid file explorer app without root i am keen to know, or if anyone can show me the way to root this device I will really appreciate.Device Details:
AP605ZSUCNE3
CP: P605ZSUCNE1
csc605OZSUCNE3
KitKat 4.4.2
With all do respect TWRP 2.7.0.1 does work on 4.4.2
I have it working myself.
Now To gain root on 4.4.2, install Autoroot - Chainfire for the SM P905
Then search the forums for a P605 recovery (Its somewhere here)
Youll get full root with original stock recovery. Then flash TWRP 2.7.0.1 and then youll be fine.
Remember the current TWRP version on the main post isnt the correct version...Further into the thread there is the correct version.
Need any help. as per always im on Facebook and Am happy to teamviewer in
fkofilee said:
With all do respect TWRP 2.7.0.1 does work on 4.4.2
I have it working myself.
Now To gain root on 4.4.2, install Autoroot - Chainfire for the SM P905
Then search the forums for a P605 recovery (Its somewhere here)
Youll get full root with original stock recovery. Then flash TWRP 2.7.0.1 and then youll be fine.
Remember the current TWRP version on the main post isnt the correct version...Further into the thread there is the correct version.
Need any help. as per always im on Facebook and Am happy to teamviewer in
Click to expand...
Click to collapse
No need to flash auto root for P905 just flash supersu from recovery TWRP 2.7.0.1 WORKS on 4.4.2!!!!
alex_72gr said:
No need to flash auto root for P905 just flash supersu from recovery TWRP 2.7.0.1 WORKS on 4.4.2!!!!
Click to expand...
Click to collapse
Hi,
Test TWRP 2.7.0.1 and no found !! to Kitkat
Big problem screen fully striped and very difficult to restore! And autoroot is a disaster!
Alan-B said:
Hi,
Test TWRP 2.7.0.1 and no found !! to Kitkat
Big problem screen fully striped and very difficult to restore! And autoroot is a disaster!
Click to expand...
Click to collapse
Mate, you were told cf-autoroot DOESN'T work and will screw things up... Why did you flash over something not working right?
You needed to find the stock recovery first, then flash 2.7.0.1 (not 2.7.0.0) to get TWRP installed. You then flash latest supersu using TWRP. This will root your device and give you a custom recovery..
The only thing is TWRP can't make a backup to the External sd card if you have it formatted exFAT...
Best advice, flash stock rom (kitkat only) again using PC ODIN, try again...
ultramag69 said:
Mate, you were told cf-autoroot DOESN'T work and will screw things up... Why did you flash over something not working right?
You needed to find the stock recovery first, then flash 2.7.0.1 (not 2.7.0.0) to get TWRP installed. You then flash latest supersu using TWRP. This will root your device and give you a custom recovery..
The only thing is TWRP can't make a backup to the External sd card if you have it formatted exFAT...
Click to expand...
Click to collapse
Yep, autoroot for P605 hasnt been updated yet to 4.4.2
Yes you can flash twrp and then SU , I came from the full firmware reflash... I t was the only way to put root on at the time.
Alan-B said:
Hi,
Test TWRP 2.7.0.1 and no found !! to Kitkat
Big problem screen fully striped and very difficult to restore! And autoroot is a disaster!
Click to expand...
Click to collapse
You can follow those links to get what you need.
http://forum.xda-developers.com/showpost.php?p=53236030&postcount=19
alex_72gr said:
You can follow those links to get what you need.
http://forum.xda-developers.com/showpost.php?p=53236030&postcount=19
Click to expand...
Click to collapse
Hi,
Having installed TWRP 2.7.0.1 on P605XXUCNE2 everything planted me! over the boot rom recovery mode and more !!!!
I spent two hours to get to switch back download.J 'thought my Note2 LTE 2014 was dead!
Sorry for the translation, I'm French
Alan-B said:
Hi,
Test TWRP 2.7.0.1 and no found !! to Kitkat
Big problem screen fully striped and very difficult to restore! And autoroot is a disaster!
Click to expand...
Click to collapse
0. If you screwed something up, flashed a wrong recovery, flash the stock rom again. If you are stuck in a boot loop, there is plenty of thread about how to boot into odin mode from there.
1. Download attached TWRP 2.7.0.1, it works with P605. I have it myself.
2. Start the tablet, download SuperSU-v1.99r4.zip, place on SD Card.
3. Reboot into Odin mode, (VolDown+Home), flash TWRP. If your recovery is being restored, don't tick Auto Reboot in Odin and turn off manually after flashing, then boot into TWRP.
4. Boot into TWRP, reset to factory settings. You will be asked if you want Root at some point. I think it's when you reboot, I don't remember.
5. When booted into Android, see if SuperSU downloader app is there. If no - boot TWRP and look around, because you missed something.
If yes, reboot into TWRP again and flash UPDATE-SuperSU-v1.99r4.zip.
Congrats, you are now rooted.
xda_user_p600 said:
0. If you screwed something up, flashed a wrong recovery, flash the stock rom again. If you are stuck in a boot loop, there is plenty of thread about how to boot into odin mode from there.
1. Download attached TWRP 2.7.0.1, it works with P605. I have it myself.
2. Start the tablet, download SuperSU-v1.99r4.zip, place on SD Card.
3. Reboot into Odin mode, (VolDown+Home), flash TWRP. If your recovery is being restored, don't tick Auto Reboot in Odin and turn off manually after flashing, then boot into TWRP.
4. Boot into TWRP, reset to factory settings. You will be asked if you want Root at some point. I think it's when you reboot, I don't remember.
5. When booted into Android, see if SuperSU downloader app is there. If no - boot TWRP and look around, because you missed something.
If yes, reboot into TWRP again and flash UPDATE-SuperSU-v1.99r4.zip.
Congrats, you are now rooted.
Click to expand...
Click to collapse
Re hello,
he problem is that just after the flash TWRP nothing boot! or recovery (zebra screen) and reboot loop and very difficult to switch back to download due to the reboot loop!
Just TWRP 2.7.0.0 works with Version 4.3 Note: The 2.7.0.1 works with 4.3 rom or not ? just to test !
Thank you for the helps
Alan-B said:
Re hello,
he problem is that just after the flash TWRP nothing boot! or recovery (zebra screen) and reboot loop and very difficult to switch back to download due to the reboot loop!
Just TWRP 2.7.0.0 works with Version 4.3 Note: The 2.7.0.1 works with 4.3 rom or not ? just to test !
Thank you for the helps
Click to expand...
Click to collapse
Attached version works with 4.4.2 Nordic.
After you flashed wrong recovery and have "zebra screen", Make sure you flashed stock firmware after that. Don't try flashing anything else before you flash stock.
xda_user_p600 said:
Attached version works with 4.4.2 Nordic.
After you flashed wrong recovery and have "zebra screen", Make sure you flashed stock firmware after that. Don't try flashing anything else before you flash stock.
Click to expand...
Click to collapse
re...
I just tested a flash TWRP from your link, but it boot and stuck on the TAB 10.1 lte logo
Mate, flash Kitkat rom 1st then flash TWRP... Doing anything else is gonna get you in trouble...
2.7.0.1 TWRP has Kitkat recovery, not Jellybean so you will have issues if you flash on a Jellybean rom...
ultramag69 said:
Mate, flash Kitkat rom 1st then flash TWRP... Doing anything else is gonna get you in trouble...
2.7.0.1 TWRP has Kitkat recovery, not Jellybean so you will have issues if you flash on a Jellybean rom...
Click to expand...
Click to collapse
Re hello, and always attempts to boot and TWRP stuck on 10.1 NOTE and the red and blue lines jaune.testé logo with flash P605XXUCNE2_P605OXACNE2_P605XXUCNE2_HOME.tarre, boot in download mod and flash TWRP without reboot, then reboot manual recovery (stuck) Same with auto reboot and there is nothing not to have the display of recovery!
I understand you. Are you sure you're not missing anything? It might help to flash stock NEE again. In my case I ticked "Update boot loader", do you mind trying that?
Remember, TWRP is VolUp+Home. It should display colored text in the right upper corner on 2014 logo when booting, if it's entering recovery mode.
Hi,
Solved it is Ok....
Thanks
Hi all! I can't seem to find a flashable CWM 6.0.4.7 recovery for our G PRO(E98x/F240x).
If anyone can give me a link or the file itself, I would be very thankful!
Thanks in advance!
MitoTakatori said:
Hi all! I can't seem to find a flashable CWM 6.0.4.7 recovery for our G PRO(E98x/F240x).
If anyone can give me a link or the file itself, I would be very thankful!
Thanks in advance!
Click to expand...
Click to collapse
here you go
hyperionx7 said:
here you go
Click to expand...
Click to collapse
Wow that is fast! Thanks mate. I'll try this one. Kudos!
hyperionx7 said:
here you go
Click to expand...
Click to collapse
Loki check problem when I flashed it. Any lokified recovery? Thanks!
MitoTakatori said:
Loki check problem when I flashed it. Any lokified recovery? Thanks!
Click to expand...
Click to collapse
well i took that file from freegee folder, maybe you must flash this file first
Download CWM OR TWRP without any hassle
Just download freegee(root) from Google play store and once installed and opened ....let it download the necessary....then just click on cwm or twrp as per ur wish ......u might then feel as if the app has frozen....but it is the process of downloading...... And once finished it will show flash successful ....
Works with 4.4.2?
I used the FreeGee app on stock 4.4.2 V20c earlier, but it bricked my device. Why is that? How do I install a recovery on 4.4.2?
i have a question on flashing the cwm recovery image, i had to go back to stock as i was soft bricked - i now need to install a recovery and i am sure that when i did this a few weeks ago on my g pro i used flashify and flashed the cwm recovery image through this app and everything works ed well, now i am trying to do it and it flashes the file but wont go into recovery - it says fastboot mode started but never goes into recovery, i also tried rom toolbox to flash it and not having any luck - anyone have a way to do this ?
hyperionx7 said:
here you go
Click to expand...
Click to collapse
Not work on LG F240L? Help
I want to flash rom [ROM][UNOFFICIAL][CM12][5.0.2][2/1/15] LiquidSmooth v4.0 on http://forum.xda-developers.com/opt...liquidsmooth-v4-0-t3013270/page3#post58726587
or rom Mokee http://download.mokeedev.com/?device=e980
Help me!
Thank's
I would like to install a CWM touch variant, is there a way to get it done with KK stock rom?
I know it needs to be "lokified", but I have no clue how to do this.
Is there any tutorial to do this?
chrisdotjan said:
I would like to install a CWM touch variant, is there a way to get it done with KK stock rom?
I know it needs to be "lokified", but I have no clue how to do this.
Is there any tutorial to do this?
Click to expand...
Click to collapse
Philz touch cwm is a good one, you can find here on xda, or via Google search. However, my personal experience with cwm touch variant on e980 is that it causes the recovery bootloop (where you just keeps on going back to the recovery screen). Version 6.0.47 is stable , and will not cause the boot loop say when you try to open the recovery by using the up volume + power buttons. This seem to be the issue too with the cwm provided by cm update in the developer's option. Read the postings in the Philz's thread if you want to know more about the recovery loop and the touch cwm.
I get wrong date and time whene i make a backup. I have a E986. How can i fix this?
Hello there,
This is my first XDA thread! This is an issue I ran into.
I just installed CM 14.1 on my OP3. I downloaded the latest TWRP from the official website before flashing it.
Here is the problem. After setting up my ROM, like installing all the required apps, I'm not able to boot into recovery. I tried flashing TWRP again, I downloaded the oneplus recovery from your website and I flashed that one too.
I erased recovery partition and installed both of them again (erasing each time). What happens is, after booting into the bootloader, I select recovery to go to the recovery and it stays blank, unless I reset it by holding the buttons.
Please let me know what I can do.
Same happened to me also. But somehow I fixed it by installing TWRP again by using OnrPlus 3 toolkit. Here is the toolkit forum.xda-developers.com/oneplus-3/development/tool-tool-one-driversunlocktwrpfactory-t3398993. Can't post links. Don't forget to put http:// front of it
SillyPython said:
Same happened to me also. But somehow I fixed it by installing TWRP again by using OnrPlus 3 toolkit. Here is the toolkit forum.xda-developers.com/oneplus-3/development/tool-tool-one-driversunlocktwrpfactory-t3398993. Can't post links. Don't forget to put http:// front of it
Click to expand...
Click to collapse
Thanks for the reply.
Are you sure what happened to is exactly what happened to you? Because I tried the ToolKit and it is not working. I tried both the versions of the TWRP and Stock recovery.
If you know anything else about this issue that would help me. I'd love to hear it.
SillyPython said:
Same happened to me also. But somehow I fixed it by installing TWRP again by using OnrPlus 3 toolkit. Here is the toolkit forum.xda-developers.com/oneplus-3/development/tool-tool-one-driversunlocktwrpfactory-t3398993. Can't post links. Don't forget to put http:// front of it
Click to expand...
Click to collapse
Also. Does encryption affect this in anyway, because I did it. I don't want to factory reset my phone because this is my primary phone and I don't have another phone. And I don't want to risk it, at least for a few days.
malachiseelam said:
Hello there,
This is my first XDA thread! This is an issue I ran into.
I just installed CM 14.1 on my OP3. I downloaded the latest TWRP from the official website before flashing it.
Here is the problem. After setting up my ROM, like installing all the required apps, I'm not able to boot into recovery. I tried flashing TWRP again, I downloaded the oneplus recovery from your website and I flashed that one too.
I erased recovery partition and installed both of them again (erasing each time). What happens is, after booting into the bootloader, I select recovery to go to the recovery and it stays blank, unless I reset it by holding the buttons.
Please let me know what I can do.
Click to expand...
Click to collapse
Modified TWRP version should do it
Same, when I flashed cm 14.1 I also got blank TWRP.
michielokt said:
Same, when I flashed cm 14.1 I also got blank TWRP.
Click to expand...
Click to collapse
Then, what did you do?
LS.xD said:
Modified TWRP version should do it
Click to expand...
Click to collapse
Thanks LS.xD. You are awesome. I completely messed up my old Moto X and I didn't have a smartphone until now. I hesitated a lot before installing all custom stuff until I gave in. And this problem made me worry a lot.
Thanks a lot.
michielokt said:
Same, when I flashed cm 14.1 I also got blank TWRP.
Click to expand...
Click to collapse
Michielokt, you should try flash the recovery LS.xD gave the link to, it booted.
malachiseelam said:
Thanks LS.xD. You are awesome. I completely messed up my old Moto X and I didn't have a smartphone until now. I hesitated a lot before installing all custom stuff until I gave in. And this problem made me worry a lot.
Thanks a lot.
Michielokt, you should try flash the recovery LS.xD gave the link to, it booted.
Click to expand...
Click to collapse
Thanks it worked!
Please try the modified TWRP, 3.0.2-22