Develop Bugs

[Q] Can't Access Recovery Mode

This blows. So my T-mobile Galaxy Note 3 is successfully rooted. Apparently TWRP was successfully installed via Odin, but my device refuses to enter Recovery Mode so no custom roms for me... When I attempt to boot to recovery it just starts on the screen which says:
"Recovery Booting....
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: Recovery"
And then it has the Sammy logo below. It stays on this screen a few seconds, turns black, goes back to that screen, and then depending on when I let go of the 3 finger salute... just boots up regularly after that.
In my research I saw a suggestion to download an app called QuickBoot and select the boot to recovery. When I did this it was just stuck in an infinite loop of the screen I described above until I pull the battery.
This is so damn frustrating. Can anyone point me in the right direction? :crying:

Reinstall TWRP and make sure you have the correct version for your Android version. If that fails, reinstall stock recovery.
Frank

Frank Westlake said:
Reinstall TWRP and make sure you have the correct version for your Android version. If that fails, reinstall stock recovery.
Frank
Click to expand...
Click to collapse
Thanks for the reply. I did try re-installing several times to no avail. The version I'm using is "openrecovery-twrp-2.6.3.0-hltetmo.img.tar" which I downloaded from: http://goo.im/devs/OpenRecovery/hltetmo . Now that you say that about the version I see the date is from January of the most recent one. Is it possible that TWRP cannot be installed on Kitkat? If so, I can't be the only one running into this problem.

jones75534 said:
Thanks for the reply. I did try re-installing several times to no avail. The version I'm using is "openrecovery-twrp-2.6.3.0-hltetmo.img.tar" which I downloaded from: http://goo.im/devs/OpenRecovery/hltetmo . Now that you say that about the version I see the date is from January of the most recent one. Is it possible that TWRP cannot be installed on Kitkat? If so, I can't be the only one running into this problem.
Click to expand...
Click to collapse
I think you need to try 2.7.0.0
http://forum.xda-developers.com/showthread.php?t=2467001

joytofender said:
I think you need to try 2.7.0.0
http://forum.xda-developers.com/showthread.php?t=2467001
Click to expand...
Click to collapse
Thanks, I'm sure that must be it. Looks like there is no 2.7 for T-Mobile Note 3 yet or am I just blind? Here's the site I'm looking at: http://teamw.in/project/twrp2/198

jones75534 said:
Thanks, I'm sure that must be it. Looks like there is no 2.7 for T-Mobile Note 3 yet or am I just blind? Here's the site I'm looking at: http://teamw.in/project/twrp2/198
Click to expand...
Click to collapse
scratch that. I am indeed blind. I see 2.7 in the downloads... the newer versions are at the bottom, not the top..... jeez *face palm*

[Q] installed cm on SM-T110,can't get out of recovery

I installed clockwork mod through odin, when I try turning the tablet on it goes streight into recovery, how do I fix this?

bitterdee said:
I installed clockwork mod through odin, when I try turning the tablet on it goes streight into recovery, how do I fix this?
Click to expand...
Click to collapse
Have installed the Quickboot.app to reboot into recovery?
The way to fix it, go back to stock with odin.

bierma32 said:
Have installed the Quickboot.app to reboot into recovery?
The way to fix it, go back to stock with odin.
Click to expand...
Click to collapse
I can't remember whether I istalled quickboot, I might have as at first after I installed CM it did go into android OS but I wanted to check whether CM stays if I boot into recovery and that's when it didn't let me get out of recovery no matter what I did.
I did fix it by installing the stock rom. Thanks for your help.

bitterdee said:
I can't remember whether I istalled quickboot, I might have as at first after I installed CM it did go into android OS but I wanted to check whether CM stays if I boot into recovery and that's when it didn't let me get out of recovery no matter what I did.
I did fix it by installing the stock rom. Thanks for your help.
Click to expand...
Click to collapse
You have install an CM = Cynagon Mod or CM mine Customrom
We are have no working CM for this tab !!!!!

bierma32 said:
You have install an CM = Cynagon Mod or CM mine Customrom
We are have no working CM for this tab !!!!!
Click to expand...
Click to collapse
The issue was with clockwork mod as my initial post states mate.

bitterdee said:
The issue was with clockwork mod as my initial post states mate.
Click to expand...
Click to collapse
clockworkmod recovery is CWM and not CM =CynagonMod
To your Prob. the only way is boot into download mode and flash Stock with Odin

[REQ] CWM 6.0.4.7 flashable recovery

Hi all! I can't seem to find a flashable CWM 6.0.4.7 recovery for our G PRO(E98x/F240x).
If anyone can give me a link or the file itself, I would be very thankful!
Thanks in advance!

MitoTakatori said:
Hi all! I can't seem to find a flashable CWM 6.0.4.7 recovery for our G PRO(E98x/F240x).
If anyone can give me a link or the file itself, I would be very thankful!
Thanks in advance!
Click to expand...
Click to collapse
here you go

hyperionx7 said:
here you go
Click to expand...
Click to collapse
Wow that is fast! Thanks mate. I'll try this one. Kudos!

hyperionx7 said:
here you go
Click to expand...
Click to collapse
Loki check problem when I flashed it. Any lokified recovery? Thanks!

MitoTakatori said:
Loki check problem when I flashed it. Any lokified recovery? Thanks!
Click to expand...
Click to collapse
well i took that file from freegee folder, maybe you must flash this file first

Download CWM OR TWRP without any hassle
Just download freegee(root) from Google play store and once installed and opened ....let it download the necessary....then just click on cwm or twrp as per ur wish ......u might then feel as if the app has frozen....but it is the process of downloading...... And once finished it will show flash successful ....

Works with 4.4.2?
I used the FreeGee app on stock 4.4.2 V20c earlier, but it bricked my device. Why is that? How do I install a recovery on 4.4.2?

i have a question on flashing the cwm recovery image, i had to go back to stock as i was soft bricked - i now need to install a recovery and i am sure that when i did this a few weeks ago on my g pro i used flashify and flashed the cwm recovery image through this app and everything works ed well, now i am trying to do it and it flashes the file but wont go into recovery - it says fastboot mode started but never goes into recovery, i also tried rom toolbox to flash it and not having any luck - anyone have a way to do this ?

hyperionx7 said:
here you go
Click to expand...
Click to collapse
Not work on LG F240L? Help
I want to flash rom [ROM][UNOFFICIAL][CM12][5.0.2][2/1/15] LiquidSmooth v4.0 on http://forum.xda-developers.com/opt...liquidsmooth-v4-0-t3013270/page3#post58726587
or rom Mokee http://download.mokeedev.com/?device=e980
Help me!
Thank's

I would like to install a CWM touch variant, is there a way to get it done with KK stock rom?
I know it needs to be "lokified", but I have no clue how to do this.
Is there any tutorial to do this?

chrisdotjan said:
I would like to install a CWM touch variant, is there a way to get it done with KK stock rom?
I know it needs to be "lokified", but I have no clue how to do this.
Is there any tutorial to do this?
Click to expand...
Click to collapse
Philz touch cwm is a good one, you can find here on xda, or via Google search. However, my personal experience with cwm touch variant on e980 is that it causes the recovery bootloop (where you just keeps on going back to the recovery screen). Version 6.0.47 is stable , and will not cause the boot loop say when you try to open the recovery by using the up volume + power buttons. This seem to be the issue too with the cwm provided by cm update in the developer's option. Read the postings in the Philz's thread if you want to know more about the recovery loop and the touch cwm.

I get wrong date and time whene i make a backup. I have a E986. How can i fix this?

Cant Install CWM On Samsung Note II N7100

Hello everyone .
I have problems installing CWM on my phone , i tried everything on this thread " http://forum.xda-developers.com/showthread.php?t=2445480 " and it would never work for me
I keep getting pass on ODIN but it keep reboot back into normal Android not recovery mode
What do it do , and please keep in mind that i am too noob with all the hard words for rooting and flashing stuff , so please explain to me what should i do
Thanks in advance .

.Hell. said:
Hello everyone .
I have problems installing CWM on my phone , i tried everything on this thread " http://forum.xda-developers.com/showthread.php?t=2445480 " and it would never work for me
I keep getting pass on ODIN but it keep reboot back into normal Android not recovery mode
What do it do , and please keep in mind that i am too noob with all the hard words for rooting and flashing stuff , so please explain to me what should i do
Thanks in advance .
Click to expand...
Click to collapse
Kitkat overwrites recovery on every reboot. So here is the solution:
When you flash cwm via ODIN, untick the auto-reboot option. Let the odin flash the file and wait for pass message.
Now reboot directly to recovery (not to phone). You will be in cwm. From there you can reboot to your phone.
Now power off your phone and see if you have a cwm recovery.
Press thumps up if you found this suggestion helpful.

ceomaverick said:
Kitkat overwrites recovery on every reboot. So here is the solution:
When you flash cwm via ODIN, untick the auto-reboot option. Let the odin flash the file and wait for pass message.
Now reboot directly to recovery (not to phone). You will be in cwm. From there you can reboot to your phone.
Now power off your phone and see if you have a cwm recovery.
Press thumps up if you found this suggestion helpful.
Click to expand...
Click to collapse
I have did what you just told me and still nothing happened and got back into normal ROM with no custom recovery , and i am on Android 4.3 i think that is jellybean not kitkat

.Hell. said:
I have did what you just told me and still nothing happened and got back into normal ROM with no custom recovery , and i am on Android 4.3 i think that is jellybean not kitkat
Click to expand...
Click to collapse
Well that is certainly weird. Are you sure you are using correct cwm file. Can you put the link of cwm file you are using?

ceomaverick said:
Well that is certainly weird. Are you sure you are using correct cwm file. Can you put the link of cwm file you are using?
Click to expand...
Click to collapse
Well i tried 3 Philz recovery files and nothing worked and here they are :
http://d-h.st/OIX
http://d-h.st/IVq
http://forum.xda-developers.com/showpost.php?p=53488494
if you have any detailed way to do it with links you can help me by posting them and i will also try your way

.Hell. said:
Well i tried 3 Philz recovery files and nothing worked and here they are :
http://d-h.st/OIX
http://d-h.st/IVq
http://forum.xda-developers.com/showpost.php?p=53488494
if you have any detailed way to do it with links you can help me by posting them and i will also try your way
Click to expand...
Click to collapse
Try this one:
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7100/philz_touch_6.48.4-n7100.zip.md5
I hope your note is 7100 not 7105.

ceomaverick said:
Try this one:
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7100/philz_touch_6.48.4-n7100.zip.md5
I hope your note is 7100 not 7105.
Click to expand...
Click to collapse
Hello , Yes my device is N7100 and i am currently on 4.3 Jellybean and i have tried your recovery file with no success still i don't know why D=

Hello , excuse me for a stupid question , but ... is your note 2 rooted ?

gb61 said:
Hello , excuse me for a stupid question , but ... is your note 2 rooted ?
Click to expand...
Click to collapse
No its not i just got it so i was trying to install CWM for the first time then root it and maybe install a custom ROM later

.Hell. said:
No its not i just got it so i was trying to install CWM for the first time then root it and maybe install a custom ROM later
Click to expand...
Click to collapse
Ok, here is the problem , you must root your phone first and after you can install a recovery like Philz or TWRP.

gb61 said:
Ok, here is the problem , you must root your phone first and after you can install a recovery like Philz or TWRP.
Click to expand...
Click to collapse
I am trying to do everything here on this thread and the first thing he said is that i need to have CWM Recovery first installed before rooting or doing anything
http://forum.xda-developers.com/showthread.php?t=2445480

.Hell. said:
I am trying to do everything here on this thread and the first thing he said is that i need to have CWM Recovery first installed before rooting or doing anything
http://forum.xda-developers.com/showthread.php?t=2445480
Click to expand...
Click to collapse
A custom recovery is necessary to install a custom rom but you can rooted your phone with Odin PC and CF-Auto-Root-t03g-t03gxx-gtn7100.zip
For example there is an explanation here :http://www.ibtimes.co.uk/galaxy-note2-n7100-root-android43-xxuemk4-jellybean-523833.
You can find others in google with search "how to root samsung galaxy note 2" .
The most important before installing is to copy your important folder to your PC.
I hope that can help you.
Excuse me for my english
---------- Post added at 05:01 PM ---------- Previous post was at 04:53 PM ----------
Other link in XDA it's seems more clear : http://forum.xda-developers.com/showthread.php?t=2143479

Okay guys i have installed Root on my phone using these two threads
http://forum.xda-developers.com/showthread.php?t=2143479
http://forum.xda-developers.com/showthread.php?t=2618261
Now what i should do actually because my problem still remain , that i cant install CWM and it keep reboot into Android not Recovery and i have tried all the methods but nothing works for me so far still

Okay guys thank you for your help , and for anyone who have my problem i used mobile odin to flash CWM

CWM RECOVERY doesn't work for me on Note 3 with Lollipop

I've used Odin 3.07 to flash n900t-cwm-recovery-6.0.4.4(1025) but it didn't pass. I'm tired now and I want to go to bed but it bugs me I don't have root.
On 4.2 I think it was easy but on 5.0 it won't work for me, now. I've scoured pages and pages, so for now I am kindly asking for some directions.

Try flashing the latest TWRP and then flash supersu from TWRP to get root.

audit13 said:
Try flashing the latest TWRP and then flash supersu from TWRP to get root.
Click to expand...
Click to collapse
Thanks, did it, it flashed it but now it gives me "Recovery is not Seandroid Enforcing". I pulled the battery right after the pass message, no change.
Read in thread about "Reactivation Lock" but I don't have that option in the stock Lollipop 5.0.
Any ideas?

So your phone is not booting? Boot into download mode and tell us what it says.

Oh no, the phone works fine. I can boot into stock Lollipop but it won't boot into recovery (Vol Up). It boots into Odin Vol Down.
All I want is to install su. First I tried to flash CWM recovery with Odin, didn't pass. Then I tried TWRP (their website is down), it passed but got "Recovery is not Seandroid Enforcing" error. So now I'm lost. I think all have to flash a modified ROM but I'm confused about their specs (what is Deoxified)
Wait wait, Oding IS the recovery, no? I'm totally confused now.

Try this: open Odin and uncheck everything except f.reset time, connect the phone, flash TWRP, when you see the word "reset" in the status window, remove USB cable, remove battery, replace battery, use button combination to boot into recovery.

Thanks for the help. I've tried that sequence before. It didn't work. I'll try it again.
But I've managed to install su using Chainfire's Auto Root for Kitkat (but I have Lollipop). Now I have an older recovery. Will that cause any troubles?
What I've learned from my "ordeal" is make sure you have the right versions. In my case particularly the phone model, N900T, and then the software versions, N900TUVUFOB6, where B6 is the Lollipop (right?).

No no no!
I've rebooted into old recovery now my user interface in Lollipop doesn't work. I guess the recovery deleted some cache (noticed some messages at the bottom)
I guess I'll burn the Lollipop + CF Autoroot for the N-th time and never boot into recovery.

Bogdan45 said:
I've used Odin 3.07 to flash n900t-cwm-recovery-6.0.4.4(1025) but it didn't pass. I'm tired now and I want to go to bed but it bugs me I don't have root.
On 4.2 I think it was easy but on 5.0 it won't work for me, now. I've scoured pages and pages, so for now I am kindly asking for some directions.
Click to expand...
Click to collapse
Do you still need help? If so reply back. I'll do way best to help. Had the three main custom recoveries and had my share of problems and learned from them haha.

LiftedDroid said:
Do you still need help? If so reply back. I'll do way best to help. Had the three main custom recoveries and had my share of problems and learned from them haha.
Click to expand...
Click to collapse
Yes, I do need a working recovery for stock Lollipop 5.0 on Note 3.

Bogdan45 said:
Yes, I do need a working recovery for stock Lollipop 5.0 on Note 3.
Click to expand...
Click to collapse
I used chain fires autoroot 9005, and installed TWRP
Sent from my SM-N9005 using Tapatalk

Bogdan45 said:
Yes, I do need a working recovery for stock Lollipop 5.0 on Note 3.
Click to expand...
Click to collapse
Sorry was busy last few days with minecraft lol. I will get that up in a few and have link for you

Hi there,
I have one question. I have rooted my phone with cf-autoroot method same as you and like you I can't installed custom recovery, weather it be TWARP or CWM. Buy my question isn't this.
I was just randomly checking my app manager for all my apps and found getroot version 1.0 was installed.
Can you confirm me that u have the same thing.
Because it has access to my camera SD card and sms.
Let me know.
Sent from my SM-N900W8 using XDA Free mobile app

No, I don't have it.

tenjohn23 said:
Hi there,
I have one question. I have rooted my phone with cf-autoroot method same as you and like you I can't installed custom recovery, weather it be TWARP or CWM. Buy my question isn't this.
I was just randomly checking my app manager for all my apps and found getroot version 1.0 was installed.
Can you confirm me that u have the same thing.
Because it has access to my camera SD card and sms.
Let me know.
Sent from my SM-N900W8 using XDA Free mobile app
Click to expand...
Click to collapse
Make sure you have patched sd access and set correct path for location.
SD patch
Or use this this version of twrp and open in Odin just as you would cf autoroot.
Uploading now
---------- Post added at 01:40 ---------- Previous post was at 01:30 ----------
tenjohn23 said:
Hi there,
I have one question. I have rooted my phone with cf-autoroot method same as you and like you I can't installed custom recovery, weather it be TWARP or CWM. Buy my question isn't this.
I was just randomly checking my app manager for all my apps and found getroot version 1.0 was installed.
Can you confirm me that u have the same thing.
Because it has access to my camera SD card and sms.
Let me know.
Sent from my SM-N900W8 using XDA Free mobile app
Click to expand...
Click to collapse
Make sure you have patched sd access and set correct path for location.
TWRP 2.8.7 Open Recovery
SD patch
Or use this this version of twrp and open in Odin just as you would cf autoroot.
TWRP 2.8.7.0 4.4
Also thesee are for smn900t I am sure as long as your using any snm900* you OK. Any issues try hard reset and last option do reflash of stock

Bogdan45 said:
Oh no, the phone works fine. I can boot into stock Lollipop but it won't boot into recovery (Vol Up). It boots into Odin Vol Down.
All I want is to install su. First I tried to flash CWM recovery with Odin, didn't pass. Then I tried TWRP (their website is down), it passed but got "Recovery is not Seandroid Enforcing" error. So now I'm lost. I think all have to flash a modified ROM but I'm confused about their specs (what is Deoxified)
Wait wait, Oding IS the recovery, no? I'm totally confused now.
Click to expand...
Click to collapse
the enforcing thing is because you have a custom recovery only, it just tells the user that it isn't factory