I tried to upgrade my rom but the process crashed. The utility mtty doesn't work because when I connect the universal, boatloader mode by the cable, to the pc, it says "USB not recognized" (sometimes when I connect the computer is frozen till I disconnect the cable of the universal)
Please, I tried to have some solutions in the forum but all the posts indicates is needed previously the usb connection.
Do you know if should be possible to run the flash of the rom in other way, for example using a serial cable connected into the miniusb of the universal, because the boatloader screen says "Serie, v.1.01"
I apprecite what you can say please, I'm really in a hole.
Try this...
Try taking out the battery for a few minutes (10-30mins) and reboot your PC then repeat upgrade process. Hope that helps. Good luck!!!
I have the same problem on my PC at work, it's caused by a poor USB chipset in the PC, or trying to connect through a USB hub.
The only thing I found that worked was to try a different PC, then it was fine...
sl9 said:
I have the same problem on my PC at work, it's caused by a poor USB chipset in the PC, or trying to connect through a USB hub.
The only thing I found that worked was to try a different PC, then it was fine...
Click to expand...
Click to collapse
In my case it still happening in other computers. Conclussion: some piece of the software in the universal has been lost. The screen shows "Serial" that means on some way that is opened to comunication but not USB.
My questions are:
- should be possible to put some starting software in SD and do the universal boot on it.
- do you know how to connect to the computer COM! port from the usb miniport of the Universal.
I appreciate, I was not planning to replace now the Universal...
beginner said:
sl9 said:
I have the same problem on my PC at work, it's caused by a poor USB chipset in the PC, or trying to connect through a USB hub.
Now works.... I still thinking windows is so stupid software made for distroy our mind ....
Solved after install drivers for a converter usb -rs232 ( I was looking for the way to connect from rs232 the universal)
I'm happy again and I promise don't try to change rom again (at least for a while)
If some person is interested in what brand of software/hardware I installed, send me a mail...
Thanks hearing me ...
Click to expand...
Click to collapse
Click to expand...
Click to collapse
i have the same problem with my friend's uni
does it mean that you don't have to own any adapter, just have to install drivers for USB to RS232 adapter
if yes, where to find it?
thanx
respectfully
ZeD
zedino said:
i have the same problem with my friend's uni
does it mean that you don't have to own any adapter, just have to install drivers for USB to RS232 adapter
if yes, where to find it?
thanx
respectfully
ZeD
Click to expand...
Click to collapse
I want to say that is running after doing some things and obviously some of it solved my problems. I made:
- unistall last version of activesync and go back to version 4.0
- delete all the applications using ports usb.
due the connection still not running (windows message: device not recognized) and because in the screen of universal I saw: "COMM1" I tried to connect from computer port rs232. By that I purchased some special cable, name: hama brand, rs232 serial, 9 pin - usb.
As you can imagine all the steps I followed were followed by the typical restart of windows. In this sense is important to say that the universal, after connect, need to do a soft reset each time (again windows....)
Other comment is that I unmark the option to connect by usb in activesync and mark the connection by com1.
and after all was done, connecting by usb the unniversal, kill wcescomm, windows said "NEw usb device, sync device". I started mtty and now appears the USB option, great! same time the screen in universal changed from comm1 to usb, more great....
and that's all.
does it mean you solve your problem using special USB 2 RS232 connector?
ZeD
PS: it was my first idea , but i still believe i can solve the problem using USB port
zedino said:
does it mean you solve your problem using special USB 2 RS232 connector?
ZeD
PS: it was my first idea , but i still believe i can solve the problem using USB port
Click to expand...
Click to collapse
I think my english wording was not fine. I mean I solved my problem after install the sofware -drivers- of the rs232 connector, but connecting to the universal by usb as on standard way I was syncronizing previous the crack with activesync.
OK, where to get this driver?
thanx
?????????? NOTHING ?????????????
zedino said:
OK, where to get this driver?
thanx
Click to expand...
Click to collapse
Try here.
http://www.hama.de/portal/type*3/action*1026/searchMode*1/q*039703
I have had the same problem several times now (search the forum for the thread).
I tried three different PC's/laptops and three different USB cables all with the same error as yourself.
Eventually I got a connection but the laborious process of trying - failing, restarting windows and soft resetting the phone, trying - failing........... until it finally worked. I did nothing differently the time that it worked but the strange thing is that it has worked every time since! Maybe the USB driver the phone has a bug in it that causes it to get 'stuck' in a mode where it will no longer correctly operate but once you have managed to 'kick' it into action it seems toi then carry on working.
It was also a ROM upgrade that caused my USB phone driver to stop functioning. Maybe the fact that the phone has a slightly diffferent software configuration after the upgrade but exactly the same hardware fingerprint causes the driver to fail.
Every time that I have had this problem it is after an upgrade but once I have gotten it to work once with the new ROM, it always continues to function - until the next upgrade.
shrubbery said:
I have had the same problem several times now (search the forum for the thread).
I tried three different PC's/laptops and three different USB cables all with the same error as yourself.
Eventually I got a connection but the laborious process of trying - failing, restarting windows and soft resetting the phone, trying - failing........... until it finally worked. I did nothing differently the time that it worked but the strange thing is that it has worked every time since! Maybe the USB driver the phone has a bug in it that causes it to get 'stuck' in a mode where it will no longer correctly operate but once you have managed to 'kick' it into action it seems toi then carry on working.
It was also a ROM upgrade that caused my USB phone driver to stop functioning. Maybe the fact that the phone has a slightly diffferent software configuration after the upgrade but exactly the same hardware fingerprint causes the driver to fail.
Every time that I have had this problem it is after an upgrade but once I have gotten it to work once with the new ROM, it always continues to function - until the next upgrade.
Click to expand...
Click to collapse
not works, probably is this device lost forever, i have restarted device and PC almost hundred times, still the same result, uni stuck in Bootloader screen top of page "Serial" bottom of page "v1.00"
nothing changed, even if i connect to USB port
if someone have some solution to this s*it pls let me know
thanx
i have had the same. my device wast recognized by my pc, bur i used maupgradeno_id and installed a other rom, even installed the original rom from qtek (latest) then after i was finished it started then i tried the other rom and it was working. ( pc did see a unknown device ) hope you have the same and its working also.
good luck
mrijnvis said:
i have had the same. my device wast recognized by my pc, bur i used maupgradeno_id and installed a other rom, even installed the original rom from qtek (latest) then after i was finished it started then i tried the other rom and it was working. ( pc did see a unknown device ) hope you have the same and its working also.
good luck
Click to expand...
Click to collapse
no, my problem persist, hundred times i tried to recover friends device using upgrade by original shipped ROM but the device is not recognized by system so there is allways connection error, so this kind of reliving this UNI is not usable
anyway, thanx for raply and suggestion
ZeD
mrijnvis said:
i have had the same. my device wast recognized by my pc, bur i used maupgradeno_id and installed a other rom, even installed the original rom from qtek (latest) then after i was finished it started then i tried the other rom and it was working. ( pc did see a unknown device ) hope you have the same and its working also.
good luck
Click to expand...
Click to collapse
If you're stuck in bootloader mode only, visit www.buzzdev.netand look for ExitBootloader utility written by the great Buzz. Just follow his instructions or scroll thru' Universal's forum here and there for problems relating to "stuck in bootloader"
hope this helps
no device is not recognized by PC so any trying to use exitbl is not available, anyway this option was one of the first what i have tried
thanx anyway
ZeD
i had the same problem with the QTEK of my principal after I upgraded his ROMs.
(after the hard reset, the pocket remained in bootloader mode).
you can solve this problem in a very simple way:
you have to launch the bootloader installation (BL1.01_RUU_UNI_V.1.2.EXE) from the PC (still connected with the PPC through USB) while the PPC is in bootloader mode (on your display you see "USB > Serial 1.01" or something like that).
then you do a SOFT reset and the pocket boot normally.
very simple.
i hope to be helpful to someone.
zedino said:
no device is not recognized by PC so any trying to use exitbl is not available, anyway this option was one of the first what i have tried
thanx anyway
ZeD
Click to expand...
Click to collapse
I had some problem. After uninstall all usb applications in the pc and install the software for cable usb -rs 232, doing some softreset in the pda connected, it turned the screen message "Com" by "Usb"
I hard-SPLled my device and unpreded ROM Miri v3.0 on it. After the upgrade the device could not connect to my PC via ActiveSync or Mobile Center.
I tried with several PCs, laptops and many cables.
It should be 'soft'ware, since the problem started after ROM upgrade.
So, I figured it was because of the ROM, so downgraded to official 6.1 ROM, but connecting is still not possible. The official ROM included bootloader, radio and OS, btw.
Now I am stuck with a device that cannot connect to any PC! I always get a message of an unknown device that connects, later on followed by a message of an unknown USB device.
And yes, tried to remove the speed-up of ActiveSync. Also tried as USB storage, but I get the unknown USB device all the time...
Please help, I don't know what to try now!
Try a different USB cable. Might be a good idea to buy a brand new one. They tend to go corrupt easily.
Bright.Light said:
I hard-SPLled my device and unpreded ROM Miri v3.0 on it. After the upgrade the device could not connect to my PC via ActiveSync or Mobile Center.
I tried with several PCs, laptops and many cables.
It should be 'soft'ware, since the problem started after ROM upgrade.
So, I figured it was because of the ROM, so downgraded to official 6.1 ROM, but connecting is still not possible. The official ROM included bootloader, radio and OS, btw.
Now I am stuck with a device that cannot connect to any PC! I always get a message of an unknown device that connects, later on followed by a message of an unknown USB device.
And yes, tried to remove the speed-up of ActiveSync. Also tried as USB storage, but I get the unknown USB device all the time...
Please help, I don't know what to try now!
Click to expand...
Click to collapse
Have you tried using a differant usb port? I had to do that with a miri rom on my "old" Blackstone. I did have trouble with miri roms doing that on my Touch HD,for some strange reason.
You could also go to the threads in that forum and read what people have done to remedy that problem on the HD, as it should also work on our Tilt 2.
Later..............
Bright.Light said:
I hard-SPLled my device and unpreded ROM Miri v3.0 on it. After the upgrade the device could not connect to my PC via ActiveSync or Mobile Center.
I tried with several PCs, laptops and many cables.
It should be 'soft'ware, since the problem started after ROM upgrade.
So, I figured it was because of the ROM, so downgraded to official 6.1 ROM, but connecting is still not possible. The official ROM included bootloader, radio and OS, btw.
Now I am stuck with a device that cannot connect to any PC! I always get a message of an unknown device that connects, later on followed by a message of an unknown USB device.
And yes, tried to remove the speed-up of ActiveSync. Also tried as USB storage, but I get the unknown USB device all the time...
Please help, I don't know what to try now!
Click to expand...
Click to collapse
try rebooting your pc, also try a different usb port on your comptuer and then try another usb cable. i have read somewere that some computers do not put out enough voltage on the usb ports, so this said, after you try the previous suggestions grab your cable and try another computer, after you install activesynce of course .
Thanks for thinking with me!
I tried several PCs, so, yes, different USB ports.
Also tried several cables that proved to be ok with other devices, including one ExtUSB cable.
Of cause resetted PCs before connecting and first installing ActiveSync or Windows Mobile Center (depending on OS: WinXP or Vista)
When connecting to USB connections that worked before now sometimes the Touch tells me there is insufficient power... That's strange too! It would mean the device needs more than 500mA in some cases (because it's the only device connection to the USB) - but this is on more USB ports of different computers!
So I tried everything qua hardware... Don't know what to do now.
Bright.Light said:
Thanks for thinking with me!
So I tried everything qua hardware... Don't know what to do now.
Click to expand...
Click to collapse
Have you considered -- or tried -- flashing to a different ROM via the sd-card method? The method where you put the RHODIMG.nbh file in the root of your sd card (by removing card and using a card reader attached to PC), then put the TP2 in bootloader and it flashes the new ROM from the sd card...something like that?
I probably didn't describe this quite right -- I haven't done it myself -- but lots of people prefer this rom-flashing method. Find/check-out the procedure elsewhere on this forum.
If it works then maybe you'd get away from the problem-rom...if the rom is really the problem.
Hi!
My name is MyThejuli and i have a big problem with my note 2(international n7100)!!
Problem:
I want to connect my phone to my pc but it wont work.
What i tried to do:
Changed rom,changed usb flex(original one),changed usb cable(all oem and all from other note 2 users where their usb to pc works,5 of them)
Changed pc(4 times (vista, xp, 7, and my pc win7 and8)
Changed radio,went to the A1 store(yes im Form austria)(they sad i should replace(for 450€) it but i need the phone!)
Changed the drivers on the pc and installed them...+changed the usb flex again... *POKERFACE*
Changed quallcom usb settings back and forth(between mtp and mtp+...)
I dont know what to do now i had a problem with my efs partition (suddenly rebooted then there was no h/w number and no imei and no receiption)<--- Fixed
in the past. but after that (2 weeks later the usb problem began...)
Im currently using the standard 4.3 test firmware
PLS help me im normally very good at computers and phone but i cant get it to work i want my usb back(its charging fast since usb flex change number 2)
Pls its hopeless for me i tried every damn thing to get this to work! But nothing works!!!!!!!
Sorry for y and z error using false keyboard layout and cant switch it(i dont know how.. i changed it in the settings but layout is always the same)
Thanks!
PS: please dont say that i should find a genuine seller because i tried another one from a friends note II and it didnt work!
PPS: I have the flex from TOKKA-VERSAND (good german amazon seller) and the first replacement, also from amazon but i dont know the seller anymore.
PPPs: If nothing works i would sell it!PM me if you are interrested!
Hi,
Have you found a fix on this one? I'm having the same problem. When I plug my note 2 to my PC, it charges but it is not being detected by the PC. I've read posts saying that this problem is caused by the USB fast charge being enabled in the device.
Let me know if you already found a solution to this one.
Thank you.
Hello everyone i hope you guys can help me, so im new in the note 2 world, i was given one with dn4 rom, everything was fine but when i tried to connect it to my pc, i just did nothing, only started to charge the phone, i tried different ports and usb cables and still the same, also i change de rom to DiamondV8 and the issue is still running. PS: I can see my sd card stuff on my phone. i hope this has any solution
Do you see message on pc as usb not recognised or something?
hello,
my note 2 doesn't turn on. it still remains in the display with samsung logo. i can't enter in recovery, but only in download mode. i tried to reflash the twrp with odin, but odin doesn't recognize the smartphone.
how can i solve?
thank you
Did Odin recognise the phone before?
Unfortunately I've been there, Odin won't recognise the note 2 nether will the PC, there is a problem in the USB socket that comes with the phone that makes the phone unable to be recognized by the PC unless you use the Cable that came with the phone and not always, so you have two options now:
1-keep trying any cable you find, even if it was a camera cable or other devices, or try to find the original note 2 cable.
2-or change the USB socket in your phone with a normal one and you will be able to make it recognized by the PC.
I always hated that issue ?
If you could solve it in another way, then tell me..
Regards Migo
@audit13 no @MigO thanks, i will try with another cable, but i don't have original cable
Also try all usb 2.0 ports and make sure drivers are installed properly.