Related
I tried to upgrade my rom but the process crashed. The utility mtty doesn't work because when I connect the universal, boatloader mode by the cable, to the pc, it says "USB not recognized" (sometimes when I connect the computer is frozen till I disconnect the cable of the universal)
Please, I tried to have some solutions in the forum but all the posts indicates is needed previously the usb connection.
Do you know if should be possible to run the flash of the rom in other way, for example using a serial cable connected into the miniusb of the universal, because the boatloader screen says "Serie, v.1.01"
I apprecite what you can say please, I'm really in a hole.
Try this...
Try taking out the battery for a few minutes (10-30mins) and reboot your PC then repeat upgrade process. Hope that helps. Good luck!!!
I have the same problem on my PC at work, it's caused by a poor USB chipset in the PC, or trying to connect through a USB hub.
The only thing I found that worked was to try a different PC, then it was fine...
sl9 said:
I have the same problem on my PC at work, it's caused by a poor USB chipset in the PC, or trying to connect through a USB hub.
The only thing I found that worked was to try a different PC, then it was fine...
Click to expand...
Click to collapse
In my case it still happening in other computers. Conclussion: some piece of the software in the universal has been lost. The screen shows "Serial" that means on some way that is opened to comunication but not USB.
My questions are:
- should be possible to put some starting software in SD and do the universal boot on it.
- do you know how to connect to the computer COM! port from the usb miniport of the Universal.
I appreciate, I was not planning to replace now the Universal...
beginner said:
sl9 said:
I have the same problem on my PC at work, it's caused by a poor USB chipset in the PC, or trying to connect through a USB hub.
Now works.... I still thinking windows is so stupid software made for distroy our mind ....
Solved after install drivers for a converter usb -rs232 ( I was looking for the way to connect from rs232 the universal)
I'm happy again and I promise don't try to change rom again (at least for a while)
If some person is interested in what brand of software/hardware I installed, send me a mail...
Thanks hearing me ...
Click to expand...
Click to collapse
Click to expand...
Click to collapse
i have the same problem with my friend's uni
does it mean that you don't have to own any adapter, just have to install drivers for USB to RS232 adapter
if yes, where to find it?
thanx
respectfully
ZeD
zedino said:
i have the same problem with my friend's uni
does it mean that you don't have to own any adapter, just have to install drivers for USB to RS232 adapter
if yes, where to find it?
thanx
respectfully
ZeD
Click to expand...
Click to collapse
I want to say that is running after doing some things and obviously some of it solved my problems. I made:
- unistall last version of activesync and go back to version 4.0
- delete all the applications using ports usb.
due the connection still not running (windows message: device not recognized) and because in the screen of universal I saw: "COMM1" I tried to connect from computer port rs232. By that I purchased some special cable, name: hama brand, rs232 serial, 9 pin - usb.
As you can imagine all the steps I followed were followed by the typical restart of windows. In this sense is important to say that the universal, after connect, need to do a soft reset each time (again windows....)
Other comment is that I unmark the option to connect by usb in activesync and mark the connection by com1.
and after all was done, connecting by usb the unniversal, kill wcescomm, windows said "NEw usb device, sync device". I started mtty and now appears the USB option, great! same time the screen in universal changed from comm1 to usb, more great....
and that's all.
does it mean you solve your problem using special USB 2 RS232 connector?
ZeD
PS: it was my first idea , but i still believe i can solve the problem using USB port
zedino said:
does it mean you solve your problem using special USB 2 RS232 connector?
ZeD
PS: it was my first idea , but i still believe i can solve the problem using USB port
Click to expand...
Click to collapse
I think my english wording was not fine. I mean I solved my problem after install the sofware -drivers- of the rs232 connector, but connecting to the universal by usb as on standard way I was syncronizing previous the crack with activesync.
OK, where to get this driver?
thanx
?????????? NOTHING ?????????????
zedino said:
OK, where to get this driver?
thanx
Click to expand...
Click to collapse
Try here.
http://www.hama.de/portal/type*3/action*1026/searchMode*1/q*039703
I have had the same problem several times now (search the forum for the thread).
I tried three different PC's/laptops and three different USB cables all with the same error as yourself.
Eventually I got a connection but the laborious process of trying - failing, restarting windows and soft resetting the phone, trying - failing........... until it finally worked. I did nothing differently the time that it worked but the strange thing is that it has worked every time since! Maybe the USB driver the phone has a bug in it that causes it to get 'stuck' in a mode where it will no longer correctly operate but once you have managed to 'kick' it into action it seems toi then carry on working.
It was also a ROM upgrade that caused my USB phone driver to stop functioning. Maybe the fact that the phone has a slightly diffferent software configuration after the upgrade but exactly the same hardware fingerprint causes the driver to fail.
Every time that I have had this problem it is after an upgrade but once I have gotten it to work once with the new ROM, it always continues to function - until the next upgrade.
shrubbery said:
I have had the same problem several times now (search the forum for the thread).
I tried three different PC's/laptops and three different USB cables all with the same error as yourself.
Eventually I got a connection but the laborious process of trying - failing, restarting windows and soft resetting the phone, trying - failing........... until it finally worked. I did nothing differently the time that it worked but the strange thing is that it has worked every time since! Maybe the USB driver the phone has a bug in it that causes it to get 'stuck' in a mode where it will no longer correctly operate but once you have managed to 'kick' it into action it seems toi then carry on working.
It was also a ROM upgrade that caused my USB phone driver to stop functioning. Maybe the fact that the phone has a slightly diffferent software configuration after the upgrade but exactly the same hardware fingerprint causes the driver to fail.
Every time that I have had this problem it is after an upgrade but once I have gotten it to work once with the new ROM, it always continues to function - until the next upgrade.
Click to expand...
Click to collapse
not works, probably is this device lost forever, i have restarted device and PC almost hundred times, still the same result, uni stuck in Bootloader screen top of page "Serial" bottom of page "v1.00"
nothing changed, even if i connect to USB port
if someone have some solution to this s*it pls let me know
thanx
i have had the same. my device wast recognized by my pc, bur i used maupgradeno_id and installed a other rom, even installed the original rom from qtek (latest) then after i was finished it started then i tried the other rom and it was working. ( pc did see a unknown device ) hope you have the same and its working also.
good luck
mrijnvis said:
i have had the same. my device wast recognized by my pc, bur i used maupgradeno_id and installed a other rom, even installed the original rom from qtek (latest) then after i was finished it started then i tried the other rom and it was working. ( pc did see a unknown device ) hope you have the same and its working also.
good luck
Click to expand...
Click to collapse
no, my problem persist, hundred times i tried to recover friends device using upgrade by original shipped ROM but the device is not recognized by system so there is allways connection error, so this kind of reliving this UNI is not usable
anyway, thanx for raply and suggestion
ZeD
mrijnvis said:
i have had the same. my device wast recognized by my pc, bur i used maupgradeno_id and installed a other rom, even installed the original rom from qtek (latest) then after i was finished it started then i tried the other rom and it was working. ( pc did see a unknown device ) hope you have the same and its working also.
good luck
Click to expand...
Click to collapse
If you're stuck in bootloader mode only, visit www.buzzdev.netand look for ExitBootloader utility written by the great Buzz. Just follow his instructions or scroll thru' Universal's forum here and there for problems relating to "stuck in bootloader"
hope this helps
no device is not recognized by PC so any trying to use exitbl is not available, anyway this option was one of the first what i have tried
thanx anyway
ZeD
i had the same problem with the QTEK of my principal after I upgraded his ROMs.
(after the hard reset, the pocket remained in bootloader mode).
you can solve this problem in a very simple way:
you have to launch the bootloader installation (BL1.01_RUU_UNI_V.1.2.EXE) from the PC (still connected with the PPC through USB) while the PPC is in bootloader mode (on your display you see "USB > Serial 1.01" or something like that).
then you do a SOFT reset and the pocket boot normally.
very simple.
i hope to be helpful to someone.
zedino said:
no device is not recognized by PC so any trying to use exitbl is not available, anyway this option was one of the first what i have tried
thanx anyway
ZeD
Click to expand...
Click to collapse
I had some problem. After uninstall all usb applications in the pc and install the software for cable usb -rs 232, doing some softreset in the pda connected, it turned the screen message "Com" by "Usb"
Sim/App unlocked S621 can't sync or even connect via USB, which leads me to believe the port might be fried (it still charges), or the installed unlock bugged it?
Used P4 XPSP3/Vista 32bit + Dual Vista 32bit on multiple USB ports and device is not recognized on Active Sync 4.2/4.5 + WMDC 6.1 after re-installs and re-boots?
ROM ver 1.19.631.3 - HTC S621
Tried bootloader screen and multiple provider base ROM's with always a "Error [260]: Connection" response. Completed file wipes and 5+ hard boots.
Using a "SpeakOut" (7-11) SIM and have loaded other apps on the device via WiFi/IE but need to be able to access FAT32 for business files and would like to 6.1!
Have searched the previous posts extensively.
Please advise and thanks.
GWN - Great White North.
related:
http://social.microsoft.com/Forums/.../thread/73581fb9-7951-465e-8a82-6cb70fcd22e6/
1) Try changing the cable
2) check if the device socket is clean
3) Try with hard reset
Still no sync?
sergiopi said:
1) Try changing the cable
2) check if the device socket is clean
3) Try with hard reset
Click to expand...
Click to collapse
1) 3 x Cable/USB Port operational with Canon Camera and 2GB generic 1.8" player, file transfer and power. S621 is charging on all three but no access.
2) http://s591.photobucket.com/albums/ss351/40two40888/
Documents cleaning of what was dirty port.
3) Tried 3x hard reset and watched USB ports in EVEREST Ultimate which logged the Camera, the 1.8" and the USB mouse, but no init or i/o for the S621?
Still no sync or device access. Any more suggestions?
FYI - I took apart the S621 to clean and after restart it took 1+ hours for the display to return to normal with no discoloration or streaking. Thought I would have to install a new LCD.
Please advise and thanks.
On a hunch try a different Computer preferably XP with active sync to diagnose if it's an OS problem a USB problem?
Could be just that your computer is not recognizing it, to which then could be corrupted driver.
Start by trying different comp.
stylez said:
On a hunch try a different Computer preferably XP with active sync to diagnose if it's an OS problem a USB problem?
Could be just that your computer is not recognizing it, to which then could be corrupted driver.
Start by trying different comp.
Click to expand...
Click to collapse
Sorry for the delay in response. Used XP machine at a local computer store and returned the same result.
1) Used two different USB cables that would not recognize the S621 but would mount the 2GB generic 1.8" player.
2) XP Device manger returned no activity on the port but the battery charge initiated.
Any other suggestions? Half-brick?
Brief Sync
The S621 briefly synced yesterday.
The battery was down to <20% and when it was re-charged to 100% it was recognized by XP, drivers were installed and it synced with Active Sync 4.2.
Was able to read the directory but it then started to unmount and then mount several times and now the device won't sync or mount again after reboots etc.?
Any suggestions?
Still no sync
Still no sync with XP SP3(re-installed) & Vista.
Any new suggestions? Still charging via USB and adapter.
Thnx
Hi, I have reflashed my ROM I dont know how many times. Yesterday I tried to connect via activesync on a new ROM and it wouldnt connect. These are some of the things that happened:
Device orange charging light flashes a few times then goes off [never seen THAT before]
Activesyc menu comes up on device but activesync doesnt connect
Get 'this device can perform faster' message on desktop
Sometimes get USB devce not recognized on desktop
SOmetimes device orange charging light it stays on if I plug direct into PC but still doesnt activesync
I have tried to connect as DISK DRIVE but I dont see the device on my PC.
Have tried different ROMS, 6.5, 6.51, sense 2.1 and 2.5 but all have same issue. Have also tried connecting to other computers. same issue.
Have played around with USB to PC menu options (enable / diable faster data sync etc) but doesnt make a difference.
Anyone had this problems? Thoughts?
Have you tried diselecting "ask me 1st about usb connection type when I connect the device to the pc" under USB to PC settings
It worked for me
This is the exact problem I am facing!
I tried everything - as diskdrive, activesync (with/without speedup), etc.
On many ROMs, even the original one (WM6.1)
Can't connect - every PC gives an 'unknown device' and on some ROMs I cannot charge via USB, only via mains...
I also tried without the question on connection.
Just some thoughts:
Do you have corruptions on screen sometimes? (Some graphical glitches)
Any .CAB files you cannot install?
Did you try to reflash the same ROM more than once?
tried to connect without card in the device and in flight mode? (Uses less power)
With me it started after a ROM flash from Miri... (I don't blame him!!)
The Hard SPL did not give me any problem, the radio was not flashed, just the OS. But reverting did not help.
I certainly hope you will find a solution, since I have the exact same problem!!
Do you stil know what ROM you flashed when this problem occured?
I reverted to original ROM 6.1 AND 6.5 which included everything - boot, radio, os, stardup image. But it did not change!
I figured it out after trying everything i could: i think its a hardware problem. I have dropped my devicetoo many times, or plugged it in too many times. Who knows.
ekerbuddyeker said:
I figured it out after trying everything i could: i think its a hardware problem. I have dropped my devicetoo many times, or plugged it in too many times. Who knows.
Click to expand...
Click to collapse
And how did you figured it out? Did you return the device to the shop?
I have this exact same issue except I am on AthineOS... I thought it was my PC until I read these posts. No OS updates or any other machine updates were performed except on my device. Any clues as to a fix?
Somehow I don't think this is just hardware.
I did drop my device once, but that was even before first flash. After that it still worked.
So, some weeks later I HSPLed without any problem. After that the device still worked.
Then, after investigating which ROM to use I flashed the ROM a few days later.
Right after the first flash it all still worked. So, had to flash another and from that moment on the device cannot be reckognised by any PC.
I still think it has something to do with the flashing. I think the device does not give correct feedback when it receives some commands from PC (eg. the command to reply the device type/number)
Does anyone know a program which can check the USB port for the HTC Touch Pro 2? Just to test wheather the connector pins are ok?
download activesync 4.5 and run the setup. it will perform a repair. that usually solves the problem. if not, try a different usb cable and try plugging into different ports on your pc.
crazythunder said:
download activesync 4.5 and run the setup. it will perform a repair. that usually solves the problem. if not, try a different usb cable and try plugging into different ports on your pc.
Click to expand...
Click to collapse
These are the first things done. And this was already written in here.
It happens with many PCs, including some on which the device never connected to.
Also tried different cables, ports, etc.
Also disabled the fast transfer etc. etc.
Even tried several other ROMs, inclusding original Dutch 6.1 and Dutch 6.5
I'm having the same issue. I can connect via bluetooth, but not usb. And I'm stuck with 6.1. I was tole my phone was brand new, but now I'm starting to think otherwise.
waynehead05 said:
I'm having the same issue. I can connect via bluetooth, but not usb. And I'm stuck with 6.1. I was tole my phone was brand new, but now I'm starting to think otherwise.
Click to expand...
Click to collapse
Some questions, to verify this is due to flashing or is a fault in the design of the device...
- Where did you get the device?
- Have you flashed the device?
- Did you accidentally drop the device?
hi just to say had a completely orignal o2 xda orbit 1 flashed with new rom everything worked perfect before now active sync plays up i can sometimes connect but get usb device not reconigsed then click cross then pull out usb then reinsert then active sync connects works fully functional then after 5 min it disconects this is driving me mad as use active sync for a fast internet connection on my pda as my wifi is crap
Hello, XDA-Experts!
I encounter a problem with my desire HD and looking for any help I can get.
Since about one week my Phone is not recognized when connected to a PC.
I am using the phone since December 2010 and it works well since then. It's S-Off and Radio S-Off. In the moment, I am using CoreDroid 4.9 with Radio 26.06.04.06_M. Before I was using the ARHD ROM for some time.
The problem occurs on 3 different PC's with 3 different operating systems (Server 2003, Win 7 Ultimate 64-Bit, Win XP Pro SP3, all of them used to recognize the phone before). Windows never recognizes the phone now, android (in most cases) recognizes the connection an asks for the connection mode. The phone is ALWAYS charging over USB.
What I tried so far, after searching in different forums and via Google:
- Rebooting the phone
- Removing the phone's battery
- Booted in fastboot - no USB connection
- Tried a different USB cable
- Changed the USB ports at pc (without hub, no other USB-devices connected)
- Flashing other ROM (tried CM and MIUI, with full wipe/factory reset)
- Checked the USB-connector in the phone with an electronic microscope - all contacts look fine
I am running out of ideas, the only thing I couldn't try, is another radio, because I don't know how to flash without pc. But I don't think, the problem is related to the radio...
Any help is greatly appreciated.
Bladeinger said:
Hello, XDA-Experts!
I encounter a problem with my desire HD and looking for any help I can get.
Since about one week my Phone is not recognized when connected to a PC.
I am using the phone since December 2010 and it works well since then. It's S-Off and Radio S-Off. In the moment, I am using CoreDroid 4.9 with Radio 26.06.04.06_M. Before I was using the ARHD ROM for some time.
The problem occurs on 3 different PC's with 3 different operating systems (Server 2003, Win 7 Ultimate 64-Bit, Win XP Pro SP3, all of them used to recognize the phone before). Windows never recognizes the phone now, android (in most cases) recognizes the connection an asks for the connection mode. The phone is ALWAYS charging over USB.
What I tried so far, after searching in different forums and via Google:
- Rebooting the phone
- Removing the phone's battery
- Booted in fastboot - no USB connection
- Tried a different USB cable
- Changed the USB ports at pc (without hub, no other USB-devices connected)
- Flashing other ROM (tried CM and MIUI, with full wipe/factory reset)
- Checked the USB-connector in the phone with an electronic microscope - all contacts look fine
I am running out of ideas, the only thing I couldn't try, is another radio, because I don't know how to flash without pc. But I don't think, the problem is related to the radio...
Any help is greatly appreciated.
Click to expand...
Click to collapse
Your device manager shows anything when you connect it to your pc?Debugging mode is enabled?
Device Manager shows nothing. Debugging Mode is enabled.
I went through a similar problem a while back - took ages to resolve it - in my case the problem was the usb cables I was using - I had tried a few - but its possible to get cables that only charge and dont communicate - eventually i got it fixed by using a new original cable.
Might not be this for you but it certainly helped me
No fix that I know of...
I had this problem...
I tried different computers, different SD cards, I could take the sd card out and put it in a usb holder and that would work fine, so it really wasn't the sd card. I tried different usb cables too.... nothing would work.
I spoke to my carrier (Orange) to see if they could sort out the problem, and they went through their 'script' of diagnostics and came to the conclusion that it was my computer drivers and there was nothing wrong with the phone!!!
I then rang HTC and after several phones calls later, they said that they would repair it, unfortunately that would have left me without a phone for 2 weeks, so I rang Orange again to demand that they replaced the phone! I told them that HTC had said it was a fault and they sent out a replacement Luckily I had not rooted it at this point, so it was easy for me to swap it.
The replacement phone came the next day, and like magic, worked fine when I connected it to my computer (the same one that apparently had faulty drivers!!)
So, I never found a fix for this, but managed to get a replacement! hopefully you will be able to sort something out...
Good luck
I had this problem once and it turned out to be kernel related, but I'm not sure if this would apply in your case since you've flashed a few ROMs and still have the issue. Still, might be worth trying one of Apache's Buzz kernels or LeeDrOiD's latest... if only to rule out another possibility.
does your PC recognize it if you mount the SD in recovery?
if not, it should be the cable
I had the same thing, I went crazy, and somebody told me to use another cable
and worked
Same happened to me.
Seems the phone crashed the USB controller or something on the PC.
A reboot of the PC fixed it for me (I dont see you mention that anywhere).
First of all, thanks a lot for all your replies!
As I said before, I tried 2 different cables, that both worked fine before. But after your replies I tried a third, new one - same result.
The card is recognized fine by windows when I put it in a USB-Card Adapter.
What I forgot to mention in my initial post, is, that I also formatted the card in my pc, put it back in the phone and started the phone new - same result.
I will try some other kernels now. B.t.w., has anyone a solution for flashing the radio without pc? Via terminal, or recovery? As this is one of the few things, that I couldn't try yet.
I'm 99% sure radio wont be a factor in this mate as they only deal with mobile connections, eg GSM/3G, Bluetooth, WiFi and GPS. If the problem is software and not hardware then I think it will be with the Android USB gadget driver, which is in the kernel. Someone please correct me if I am wrong.
Can you mount as usb in CWM?
No, that doesn't work either.
Sent from my Desire HD using XDA Premium App
1) Try reinstall HTC driver on your windows and try again.
2) If it failed, backup all your files on sd card via USB-Card Adapter. Then use SD Formatter 3.0 (google it) to format the sd card. Copy the backup files back to SD card and try mount the usb again.
HELP i got the same problem
I use the phone in the last 6 months; I have S-OFF, clockworks custom recovery and rooted stock HTC 2.2 Froyo. The only change I made last week is purchasing a desktop cradle "stand". I tested the stand several times the last week and I was able to access the SD card & the HTC sync modes successfully.
Now when I connect the phone using stand or any other USB cable including the original HTC; nothing happened on the computer! The USB manager activates and brings up the USB connection type menu. However, nothing recognized by PC.
I tried all things that you can expect (another PC, another cable, factory reset, new room, with/without cradle) nothing happened, even I connected the phone on a new PC it didn’t detect the new driver!
What to do now??
Hi,
Not sure if you have already, but you can try the new HTC sync version 3.0.5557 - It's actually for the HTC flyer tablet, but i installed it and it works perfectly for the DHD.
You might have a driver issue, but the new 3.0 sync comes with new windows drivers so maybe it's worth a shot.
I've checked the HTC Flyer support page but there's no link there for the 3.0 Synch ... I could only find a direct link, here below
http://www.htc.com/www/SupportViewNews.aspx?dl_id=1097&news_id=923
Be sure to un-install the previous HTC sync first
Its not a driver issue, I tried the new sync. Not working. Nothing is working with USB only the charger.
I have a feeling that electrostatic damaged my USB. I remembered last week I touch the phone while charging and a one electrostatic click was strong.
help!!
Bladeinger said:
Hello, XDA-Experts!
I encounter a problem with my desire HD and looking for any help I can get.
Since about one week my Phone is not recognized when connected to a PC.
I am using the phone since December 2010 and it works well since then. It's S-Off and Radio S-Off. In the moment, I am using CoreDroid 4.9 with Radio 26.06.04.06_M. Before I was using the ARHD ROM for some time.
The problem occurs on 3 different PC's with 3 different operating systems (Server 2003, Win 7 Ultimate 64-Bit, Win XP Pro SP3, all of them used to recognize the phone before). Windows never recognizes the phone now, android (in most cases) recognizes the connection an asks for the connection mode. The phone is ALWAYS charging over USB.
What I tried so far, after searching in different forums and via Google:
- Rebooting the phone
- Removing the phone's battery
- Booted in fastboot - no USB connection
- Tried a different USB cable
- Changed the USB ports at pc (without hub, no other USB-devices connected)
- Flashing other ROM (tried CM and MIUI, with full wipe/factory reset)
- Checked the USB-connector in the phone with an electronic microscope - all contacts look fine
I am running out of ideas, the only thing I couldn't try, is another radio, because I don't know how to flash without pc. But I don't think, the problem is related to the radio...
Any help is greatly appreciated.
Click to expand...
Click to collapse
hey I have same problem... :-/
what's the solution ?? plz tell me
same problem
please help
The device acts as if it is being charged.
Steps I have taken so far:
-uninstalled T-mo Samsung mobile drivers and reinstalled
-deleted (uninstalled) ALL recognized USB devices via USB deview
-tried to connect without Samsung drivers installed and all USB devices uninstalled
-tried to connect with Samsung drivers installed and all USB devices uninstalled
-tried to connect without Samsung drivers and other devices installed
-tried to connect using safe mode, both with drivers installed and not
---**these are both trying with the current one provided on Samsung's site (1.5.14.0) and with the one found here on XDA from 25apr2013 (1.5.23.0)
-tried to connect using different USB ports
-tried to connect using a different USB port on a different USB controller altogether
The kicker:
Device is recognized instantly... on my laptop.
This means:
-It is not the USB cable I am using (even though I have tried 3 different cables altogether regardless, including the one that came with the phone)
-It is not the device itself
Possible: Windows issue? Last time this happened was long ago when I had gotten a MyTouch 3G Slide. I eventually just reinstalled Windows since I had been meaning to then. I don't want to do it now though because I have too many things installed on here to start a fresh install... but I suppose if nothing else works, that's what I'll have to do.
Before that though, I would love to hear any other suggestions from anyone here.
Some time the fault cud be the cable itself... I had same issue months ago my original samsung UsB cables didn't worked... It olwyz show the msg UsB not recognized... Then I tried with a different UsB cable (i had a Nokia UsB cable) and it worked...
Try it...
Cheers!!!
Sent from battery killer Jellybean GT-I9100 :-\
rjsmer said:
Some time the fault cud be the cable itself... I had same issue months ago my original samsung UsB cables didn't worked... It olwyz show the msg UsB not recognized... Then I tried with a different UsB cable (i had a Nokia UsB cable) and it worked...
Try it...
Cheers!!!
Sent from battery killer Jellybean GT-I9100 :-\
Click to expand...
Click to collapse
As stated, I have tried to use two other USB cables aside from just the one that came in the package.
Since all cables work on the laptop, but not this computer, I have pretty much singled it out to be a windows or a driver issue. :\
What are the specs of your desktop and the specs of your laptop? You claim it is a windows issue so I assume your laptop (that recognizes the phone) is not windows? Do you have Kies on the PC? If so, try to uninstall it completely and then install the individual drivers. Also, maybe just try updating Kies. You wouldn't need to install it, just download to your PC should work. As far as that goes, does Kies recognize the phone when plugged in at all? Does ODIN recognize the phone when plugged in? Maybe some of this will help you to find out if it is a driver issue or not. Good luck.
scott14719 said:
What are the specs of your desktop and the specs of your laptop? You claim it is a windows issue so I assume your laptop (that recognizes the phone) is not windows? Do you have Kies on the PC? If so, try to uninstall it completely and then install the individual drivers. Also, maybe just try updating Kies. You wouldn't need to install it, just download to your PC should work. As far as that goes, does Kies recognize the phone when plugged in at all? Does ODIN recognize the phone when plugged in? Maybe some of this will help you to find out if it is a driver issue or not. Good luck.
Click to expand...
Click to collapse
PC is i7 920, 12GB DDR3, Intel x58
Laptop is i5 2430M, 6GB DDR3, Sandy Bridge
Both are Win7 Pro, neither have Kies (I always just downloaded the drivers themselves) but I'm downloading it now to give it a try. As of now, nothing recognizes the phone on PC.
Kies method didn't work either
I did "Troubleshoot connection error", which I guess reinstalled the driver, but it still didn't work.
Getting ready to dig out that Win7 Pro CD at this point... :\
Shuurei said:
Kies method didn't work either
I did "Troubleshoot connection error", which I guess reinstalled the driver, but it still didn't work.
Getting ready to dig out that Win7 Pro CD at this point... :\
Click to expand...
Click to collapse
Samsung Kies isn't yet compatible with the sgh-m919. Samsung rep told me soon last night
Have you unlocked developer options yet and checked usb debugging? That might be your problem....
SBERG117 said:
Have you unlocked developer options yet and checked usb debugging? That might be your problem....
Click to expand...
Click to collapse
Enabling dev options and USB debugging was the first thing I did once I turned on the phone. Tried it both with and without, still not recognized either way. Still recognized on laptop.
I've also reinstalled windows altogether, since that fixed my issue last time around, but it's no good this time still. Clean install, formatted. No good. Previous steps from first post also taken, still no good. Tried the PDAnet method as well, no good.
At this point I am wondering if it might be an x58 issue, which would really suck, but it's the only thing I can think of given all the steps I have taken.
Okay... so what's the trick on getting Windows 7 x64 to recognize this device in Download Mode?
I have enabled USB Debugging. Tried several different ports on my Maximus V Extreme motherboard. I have tried using the PDANet drivers. Nothing works.Windows will prompt me with the "Device Driver software was not successfully installed" message. Anyone know a trick?
EDIT: FIGURED IT OUT. The last Android device I owned was the Galaxy S2. Now, back then it was understood that one should avoid Kies like the plague. However, in this case, it solved my problem. It installed all necessary drivers and I was able to communicate with ODIN. Cheers.
x58 issue
luckyduck69 said:
Okay... so what's the trick on getting Windows 7 x64 to recognize this device in Download Mode?
I have enabled USB Debugging. Tried several different ports on my Maximus V Extreme motherboard. I have tried using the PDANet drivers. Nothing works.Windows will prompt me with the "Device Driver software was not successfully installed" message. Anyone know a trick?
EDIT: FIGURED IT OUT. The last Android device I owned was the Galaxy S2. Now, back then it was understood that one should avoid Kies like the plague. However, in this case, it solved my problem. It installed all necessary drivers and I was able to communicate with ODIN. Cheers.
Click to expand...
Click to collapse
I might have pinpointed the issue!
I tried Kies again, uninstalled, reinstalled, updated. No go. I did Kies by air and got a connection! So It's gotta be something with the USB.
Although I thought it was weird, I think it might be an x58 issue, I decided to pursue that anyways.
I found out that USB issues are common with x58 (per this forum: http://www.evga.com/forums/tm.aspx?m=159610 ) and will be trying a fix located here: http://www.evga.com/forums/tm.aspx?m=442244&mpage=1
I'll report back once I try this out. Hopefully it fixes it.
If not, I just ordered another USB 3.0 controller (completely unrelated, it doesn't need to be USB 3.0, just a different controller altogether, but USB 3.0 is backwards compatible anyways. I just needed one for blackmagic) which was PCI-e x1 (still dependent on x58, so it wouldn't have mattered, check diagram on fix link), which I WAS going to install in my PCI-e x1 slot, but that would have not worked! Going to install in a PCI-e x16 and hope for the best.
I'll reply back once I test that out too.
Confirmed x58 and S4/general USB connectivity issues
Shuurei said:
I might have pinpointed the issue!
I tried Kies again, uninstalled, reinstalled, updated. No go. I did Kies by air and got a connection! So It's gotta be something with the USB.
Although I thought it was weird, I think it might be an x58 issue, I decided to pursue that anyways.
I found out that USB issues are common with x58 (per this forum: http://www.evga.com/forums/tm.aspx?m=159610 ) and will be trying a fix located here: http://www.evga.com/forums/tm.aspx?m=442244&mpage=1
I'll report back once I try this out. Hopefully it fixes it.
If not, I just ordered another USB 3.0 controller (completely unrelated, it doesn't need to be USB 3.0, just a different controller altogether, but USB 3.0 is backwards compatible anyways. I just needed one for blackmagic) which was PCI-e x1 (still dependent on x58, so it wouldn't have mattered, check diagram on fix link), which I WAS going to install in my PCI-e x1 slot, but that would have not worked! Going to install in a PCI-e x16 and hope for the best.
I'll reply back once I test that out too.
Click to expand...
Click to collapse
In case anyone was wondering or stumbles upon this later, I have a few updates.
I got the USB controller today and plugged it into the PCI-e x16 slot, plugged in the S4 and it worked completely fine.
I also contacted EVGA about the issue and will get an RMA, so perhaps it's just a faulty unit. However, this seems rather common (refer to previous linked threads) in x58 chips.
I imagine it has something to do with power distribution with the controller, which is why upping the ICH voltage fixes it for some people. The USB controller is powered via 4pin, not dependent on Southbridge. I guess the S4 has higher voltage(?) requirements for it to be recognized. It seems rather strange since my other devices are still recognized, but well, that's what I managed to come up with.
Cheers.
Shuurei said:
In case anyone was wondering or stumbles upon this later, I have a few updates.
I got the USB controller today and plugged it into the PCI-e x16 slot, plugged in the S4 and it worked completely fine.
I also contacted EVGA about the issue and will get an RMA, so perhaps it's just a faulty unit. However, this seems rather common (refer to previous linked threads) in x58 chips.
I imagine it has something to do with power distribution with the controller, which is why upping the ICH voltage fixes it for some people. The USB controller is powered via 4pin, not dependent on Southbridge. I guess the S4 has higher voltage(?) requirements for it to be recognized. It seems rather strange since my other devices are still recognized, but well, that's what I managed to come up with.
Cheers.
Click to expand...
Click to collapse
Here's my craziness.
USB connection was working yesterday. Today, it is not.
I have uninstalled/reinstalled the Samsung Windows drivers/Kies
I have even adjusted my southbridge voltage to 1.2V in my BIOS
Still, no joy.
Curiously, when I boot the phone into download/ODIN mode and connect it, ODIN recognizes the connection. Reboot back into normal mode, and no USB connection is recognized. It is not showing up in my Device Manager as an unrecognized device. It just doesn't know it is there (unless phone is in download mode).
UPDATE: Solved. I had installed this ROM (http://forum.xda-developers.com/showthread.php?t=2261013). Reading back over the thread, it provided instructions for re-enabling the USB recognition of the phone. Had to re-enable the developer options and reset USB debugging. Makes sense now.
HI
I'm facing this issue today, I've tried two different laptops, both have Windows 7 x64 installed. I've tried every USB port on the two machines, I've tried with three different cables, I've downloaded and installed every USB driver there is. no use!
I'm out of options here and I can't think where to look further.
any help please?
shuurei said:
the device acts as if it is being charged.
Steps i have taken so far:
-uninstalled t-mo samsung mobile drivers and reinstalled
-deleted (uninstalled) all recognized usb devices via usb deview
-tried to connect without samsung drivers installed and all usb devices uninstalled
-tried to connect with samsung drivers installed and all usb devices uninstalled
-tried to connect without samsung drivers and other devices installed
-tried to connect using safe mode, both with drivers installed and not
---**these are both trying with the current one provided on samsung's site (1.5.14.0) and with the one found here on xda from 25apr2013 (1.5.23.0)
-tried to connect using different usb ports
-tried to connect using a different usb port on a different usb controller altogether
the kicker:
Device is recognized instantly... On my laptop.
This means:
-it is not the usb cable i am using (even though i have tried 3 different cables altogether regardless, including the one that came with the phone)
-it is not the device itself
possible: Windows issue? Last time this happened was long ago when i had gotten a mytouch 3g slide. I eventually just reinstalled windows since i had been meaning to then. I don't want to do it now though because i have too many things installed on here to start a fresh install... But i suppose if nothing else works, that's what i'll have to do.
Before that though, i would love to hear any other suggestions from anyone here.
Click to expand...
Click to collapse
很想帮你啊 可是英文水平比较拙计
ok so now I'm guessing it is not windows, I tried on another machine with Windows Vista and got the same error.
any thoughts, anyone?
Did a factory reset for the phone
no it works!
don't know why
I just picked up this phone a couple days ago and last night tried to get the USB to work with no luck. I've tried everything I can think of. It does work in PTP mode but not MTP mode. I was able to use odin to on it though, so I was able to root it.
I've tried both in linux and on windows xp. I've never had an issue with any phone on linux and have installed/removed drivers numerous times on XP.
Tried 3 different cables, Factory reset with and without USB installed, tried pretty much everything I could find while googling similar problems (removing old registry entries, installed media player, etc)
I have adb installed on my linux box and even with debugging enabled I can't even get adb to connect to the phone.
Definitely something strange going on. Maybe I'll switch to cm10.1 to see if that makes a difference
I cant get my computer (windows 7) to connect with the phone when the phone is on, and was hoping some one might have found a fix.
This might fix it...
Shuurei said:
The device acts as if it is being charged.
Steps I have taken so far:
-uninstalled T-mo Samsung mobile drivers and reinstalled
-deleted (uninstalled) ALL recognized USB devices via USB deview
-tried to connect without Samsung drivers installed and all USB devices uninstalled
-tried to connect with Samsung drivers installed and all USB devices uninstalled
-tried to connect without Samsung drivers and other devices installed
-tried to connect using safe mode, both with drivers installed and not
---**these are both trying with the current one provided on Samsung's site (1.5.14.0) and with the one found here on XDA from 25apr2013 (1.5.23.0)
-tried to connect using different USB ports
-tried to connect using a different USB port on a different USB controller altogether
The kicker:
Device is recognized instantly... on my laptop.
This means:
-It is not the USB cable I am using (even though I have tried 3 different cables altogether regardless, including the one that came with the phone)
-It is not the device itself
Possible: Windows issue? Last time this happened was long ago when I had gotten a MyTouch 3G Slide. I eventually just reinstalled Windows since I had been meaning to then. I don't want to do it now though because I have too many things installed on here to start a fresh install... but I suppose if nothing else works, that's what I'll have to do.
Before that though, I would love to hear any other suggestions from anyone here.
Click to expand...
Click to collapse
Here's a link with a list of things to try what you may not have tried to fix your problems.
A small number of devices I have worked on have a weird thing, that the first time I plug the cable into the computer, it connects but won't show up on the screen. unplugging the USB cable from the machine for maybe 3 seconds, and reinserting makes the connection work... go figure! :>)
Aloha and Good Luck!
http://forum.xda-developers.com/showthread.php?p=32906335#post32906335