Google voice disconnect - Sony Smartwatch 3

Hi, I have a smartwatch 3 with a samsung galaxy note 3 but find that 50% of the time when giving google voice instructions the watch doesn't respond and then says connection lost. It makes one of the useful features of the watch pretty much worthless. Any ideas? Thanks

Orchidgreyscale said:
Hi, I have a smartwatch 3 with a samsung galaxy note 3 but find that 50% of the time when giving google voice instructions the watch doesn't respond and then says connection lost. It makes one of the useful features of the watch pretty much worthless. Any ideas? Thanks
Click to expand...
Click to collapse
If that Galaxy Note 3 is running the Stock ROM, than I'd say that's your problem. Samsung don't like you to use non-Samsung devices. alongside theirs.. Also, which version of Android are you running? As far as I know, the GN3's support was dropped, with the last official update being KitKat. So that might also be a problem... I highly recommend upgrading your phone to the same version of Android as your SW3 (Which would be 5.1.1 if you're on the latest update), and not using a Samsung ROM. If there's CyanogenMod for your phone, get it and try the watch again.

Related

[Q] Fitbit Flex, BT4 & Custom Roms

Hi,
I've been running jelly bam lately because of the PA features (specifically per app DPI), but I recently purchased a Fitbit Flex and couldn't get it to work. I contacted their support and they just told me they don't support custom roms.. so I tried to restore my stock ATT/Samsung rom which is just version 4.1.1. The Fitbit Flex software installs and actually has the refresh button now but my phone doesn't seem to see my Flex when bluetooth is on. I think I need an update before I will be able to use the stock rom and I'm not sure how to do the updates with TWRP installed, I tried but it keeps rebooting into recovery. Anyway, I'd prefer not using the stock rom, specifically I would prefer a custom rom with PA features. I've just tried PAC-Man 4.3 nightly from last night (pac_t0lte-nightly-20130823.zip), and while my phone's bluetooth does see the device now, the Fitbit app doesn't give me the options like it did with my stock rom. Has anyone gotten the bluetooth and their Fitbit Flex to work with a custom rom with PA features?
Thanks!
If I recall, on a S3 and using a Fitbit One, you won't see the Fitbit except inside the app. There is a "devices" section in the app which lets you check the sync box. If you don't see that then the phone isn't seeing the Fitbit. Stock rom on the S3 works fine. Any custom rom will show you stats pulled from the web but not allow you to sync from the phone. I believe their app is the problem and not necessarily the phone or rom. Anyway, I've learned to live without syncing from the phone since stock firmware just isn't for me.
lensgrabber said:
If I recall, on a S3 and using a Fitbit One, you won't see the Fitbit except inside the app. There is a "devices" section in the app which lets you check the sync box. If you don't see that then the phone isn't seeing the Fitbit. Stock rom on the S3 works fine. Any custom rom will show you stats pulled from the web but not allow you to sync from the phone. I believe their app is the problem and not necessarily the phone or rom. Anyway, I've learned to live without syncing from the phone since stock firmware just isn't for me.
Click to expand...
Click to collapse
This is all exactly the same on my Note 2, but even my stock doesn't rom work. Like I said, possibly due to the old version 4.1.1. Under the stock rom the app shows all the additional options like you mention, but my phone's bluetooth never sees the Flex. I wonder what the Fitbit app uses to determine whether to show the additional options or not. I included screenshots to my "about device". I noticed that my model number was different with the new rom and thought maybe that might have something to do with it because clearly it's not (or not just) the android version.
Have you tried a stock 4.1.2 build ??
UCAMA4
It's a good option..and worth a try....g
Sent from my SAMSUNG-SGH-I317 using XDA Premium HD app
chellexor said:
Hi,
I've been running jelly bam lately because of the PA features (specifically per app DPI), but I recently purchased a Fitbit Flex and couldn't get it to work. I contacted their support and they just told me they don't support custom roms.. so I tried to restore my stock ATT/Samsung rom which is just version 4.1.1. The Fitbit Flex software installs and actually has the refresh button now but my phone doesn't seem to see my Flex when bluetooth is on. I think I need an update before I will be able to use the stock rom and I'm not sure how to do the updates with TWRP installed, I tried but it keeps rebooting into recovery. Anyway, I'd prefer not using the stock rom, specifically I would prefer a custom rom with PA features. I've just tried PAC-Man 4.3 nightly from last night (pac_t0lte-nightly-20130823.zip), and while my phone's bluetooth does see the device now, the Fitbit app doesn't give me the options like it did with my stock rom. Has anyone gotten the bluetooth and their Fitbit Flex to work with a custom rom with PA features?
Thanks!
Click to expand...
Click to collapse
lensgrabber said:
If I recall, on a S3 and using a Fitbit One, you won't see the Fitbit except inside the app. There is a "devices" section in the app which lets you check the sync box. If you don't see that then the phone isn't seeing the Fitbit. Stock rom on the S3 works fine. Any custom rom will show you stats pulled from the web but not allow you to sync from the phone. I believe their app is the problem and not necessarily the phone or rom. Anyway, I've learned to live without syncing from the phone since stock firmware just isn't for me.
Click to expand...
Click to collapse
chellexor said:
This is all exactly the same on my Note 2, but even my stock doesn't rom work. Like I said, possibly due to the old version 4.1.1. Under the stock rom the app shows all the additional options like you mention, but my phone's bluetooth never sees the Flex. I wonder what the Fitbit app uses to determine whether to show the additional options or not. I included screenshots to my "about device". I noticed that my model number was different with the new rom and thought maybe that might have something to do with it because clearly it's not (or not just) the android version.
Click to expand...
Click to collapse
gregsarg said:
Have you tried a stock 4.1.2 build ??
UCAMA4
It's a good option..and worth a try....g
Sent from my SAMSUNG-SGH-I317 using XDA Premium HD app
Click to expand...
Click to collapse
Can someone link a stock rom for me? I have the GPe of the GS4. i9505G, and I have AT&T. Started out with SGH-i337
Fitbit Sync
I got FitBit to Sync finally with my custom rom.
I used the Build Prop Editor from JRummy. play.google.com/store/apps/details?id=com.jrummy.apps.build.prop.editor
change the ro.product.model=GT-I9505G
and ro.product.manufacturer=samsung
and save those settings, reboot, and now Fitbit will try to sync now. YAY! :victory:
chellexor said:
Hi,
I've been running jelly bam lately because of the PA features (specifically per app DPI), but I recently purchased a Fitbit Flex and couldn't get it to work. I contacted their support and they just told me they don't support custom roms.. so I tried to restore my stock ATT/Samsung rom which is just version 4.1.1. The Fitbit Flex software installs and actually has the refresh button now but my phone doesn't seem to see my Flex when bluetooth is on. I think I need an update before I will be able to use the stock rom and I'm not sure how to do the updates with TWRP installed, I tried but it keeps rebooting into recovery. Anyway, I'd prefer not using the stock rom, specifically I would prefer a custom rom with PA features. I've just tried PAC-Man 4.3 nightly from last night (pac_t0lte-nightly-20130823.zip), and while my phone's bluetooth does see the device now, the Fitbit app doesn't give me the options like it did with my stock rom. Has anyone gotten the bluetooth and their Fitbit Flex to work with a custom rom with PA features?
Thanks!
Click to expand...
Click to collapse
cklaus1 said:
I got FitBit to Sync finally with my custom rom.
I used the Build Prop Editor from JRummy. play.google.com/store/apps/details?id=com.jrummy.apps.build.prop.editor
change the ro.product.model=GT-I9505G
and ro.product.manufacturer=samsung
and save those settings, reboot, and now Fitbit will try to sync now. YAY! :victory:
Click to expand...
Click to collapse
I followed those tips and got it working on my Galaxy S3 AT&T running Carbon ROM...
but now the Dilbert app is telling me that my device is not supported... which is weird because it's just an app to view the daily comic strip.
zadigre said:
I followed those tips and got it working on my Galaxy S3 AT&T running Carbon ROM...
but now the Dilbert app is telling me that my device is not supported... which is weird because it's just an app to view the daily comic strip.
Click to expand...
Click to collapse
Just one thing to try, my FitBit wouldn't initially synchronise with any of my devices (all custom ROM)...but I then tried removing the gel cover and plastic rear battery cover of the phone (an S3), held it very close to the FitBit and it then sync'ed fine!
It seems that this new low-power Bluetooth protocol is a little too low on the power element
Note 2 & Fitbit/Bluetooth Problems
I came here looking for answers/help with my bluetooth... but so far I haven't really been able to find anything that's actually helpful. I can share with everything what I've been able to find out, though.
I have a Galaxy Note 2 running stock on Android 4.4.2 and I have the Fitbit Flex. I used to sync without any problems but after my phone updated to 4.4.2 it no longer syncs. After researching for a few days... it seems the problem is with the Update itself... it reduces power or range of Bluetooth... that's why the Flex cannot sync to it. However, I have discovered an quick fix to that:
When syncing, just place your phone on top of your Flex band and it will sync up without any problems. This has become my temporary solution. Someone else suggest another quick fix would be to turn on Mobile Hotspot on your phone... that is suppose to increase the Bluetooth Power.
I also learned that Samsung won't update the Note 2 to 4.4.4, which would have fixed this problem.. but instead will Update the Note 2 to Lollipop... but that date is still unannounced.
If anyone has any ideas on how to really fix this problem... I'm all ears. The only solution I found was to open up the phone and do something to the bluetooth chip inside... but I forgot where I found that solution.

[Q] S-Voice on Gear 2 says not installed.

Hello, I am running a Note II with jedi master x2 4.3 and purchased a Gear 2 neo, running latest firmware version.
http://forum.xda-developers.com/show....php?t=2568537
I cannot remember if I uninstalled S-Voice or it is not included, either way after trying to get it to work I donwloaded and installed an APK for the s4's s voice, it starts up and seems to work on the phone, but the watch is not recognizing it (and I did restart the watch, at which point it asked me (again) to accept the terms and conditions for S-Voice and again told me it needed to be installed.
Any thoughts? And thanks for taking the time to read this!
Edit: I fixed it using these instructions as if my phone was a non samsung

Moto 360 won't update to the latest version

I've tried resetting it, deleting the wear app, unpairing bluetooth...even tried it on my tablet and the thing just will not find the update. My friend did it the other day on his new phone and it grabbed the new update straight away.
I tried contacting Motorola support and they were useless... Does anyone have any other suggestions? I wouldn't be that bothered but I feel the wifi would make me use the watch far more, plus with the latest version it works with iPhones and I'm thinking of switching to an iPhone 6S Plus!
Thanks in advance for any help.
Synthesthesia said:
I've tried resetting it, deleting the wear app, unpairing bluetooth...even tried it on my tablet and the thing just will not find the update. My friend did it the other day on his new phone and it grabbed the new update straight away.
I tried contacting Motorola support and they were useless... Does anyone have any other suggestions? I wouldn't be that bothered but I feel the wifi would make me use the watch far more, plus with the latest version it works with iPhones and I'm thinking of switching to an iPhone 6S Plus!
Thanks in advance for any help.
Click to expand...
Click to collapse
I would suggest using an older version of Android Wear. I used version 1.3.0.2139573. Once I did this I could update my Moto 360 from 4.4w2 to 5.1.1 without a problem. After that I had to update the Android Wear app on my phone to the latest build and it's all working flawlessly so far :good:

Anyone have their Gear s3 on Pixel ??

Anyone have a Gear S 3 watch tied to their Pixel phone ?Getting one soon and wondering does it work without any issues with my Pixel . (I know Samsung pay isn't going to work )
Sent from my Pixel XL using Tapatalk
mastaofdacat said:
Anyone have a Gear S 3 watch tied to their Pixel phone ?Getting one soon and wondering does it work without any issues with my Pixel . (I know Samsung pay isn't going to work )
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
Had my Gear S3 paired to my Pixel XL for a couple days now. For the most part it works as advertised, a couple glitches so far.
Yesterday I dialed my wife from my phone and it passed the audio through my Gear S3, then I hung up and tried it again and this time it routed the call through my Pixel.
Today my alarm went off and only the phone notified me, then later on the day another alarm went off and this time the phone and watch notified me (which is what it's supposed to do).
Another glitch today was I received a couple emails, the watch made the notification sound but no vibration. Then the next few email notifications it notified me via sound and vibration (which is what I set it to do).
Don't know if it's a glitch with the Gear S3 but its only happened a couple times. Still LOVE THE WATCH.
Oh by the way if you get the Frontier, the bezel feels loose and it almost drove me crazy until I went to Best Buy to try out the demo they had and it felt the same.
Samsung pay actually works for me. It's weird cause everyone online says it doesn't I have 5 cards paired and have used it at sheets. I had no issues. Maybe the app was updated today as I just got mine today... But that was the one thing I hated to let go from my note 7 now I literally have the best of both worlds... This is thee best smart watch I've used right down to build quality.
Have you guys gotten text messages and responding to work or is that Svoice and Samsung messaging app only?
I've had both paired for over a month now (since the S3 came out) and love it. The biggest feature for me was Samsung Pay since the S3 has MST support. The Gear app updated about a week after having it which worried me because I thought it would work right out of the box. Even with the Pixel XL rooted, running a custom kernel, and an unlocked bootloader, Pay works fine. You just have to sign back into the Samsung Pay app through the Gear app after every few purchases (which can get annoying when you're trying to be cool.). Anyway, once you set up S-Voice you can send texts through it. I am using Textra and it works fine. I would imagine it would work with stock messenger as well. I can also use S-Voice to make calls through the stock dialer. Haven't used it for emails yet.
There have been a few things on the watch that have bothered me. If I turn off the call feature (because taking calls through the watch is most times inconvenient) then turning the ring doesn't work to answer or reject calls. It would be nice if you were to turn it and the phone would answer in speaker mode. Also, my watch always locks on me. I think with the factory strap the watch rides up too high on my wrist and a tattoo there messes with the sensors and the watch thinks i'm not wearing it. It's annoying to have enter my pin everytime I want to look at a notification. I'm am ordering another strap which I hope will hold the watch closer to my wrist and tighter to the skin which I hope will help.
Battery life has been great with me, but I don't have LTE, Wi-Fi, or the AOD on. Through regular use from 0700-2200, I put it on the charger and it has 87% life left on average.
At the end of the day, I love it. I just wish Samsung would ditch Tizen and go with Android Wear. I'm sure they could make Samsung Pay work with Wear.
nique0201 said:
Samsung pay actually works for me. It's weird cause everyone online says it doesn't I have 5 cards paired and have used it at sheets. I had no issues. Maybe the app was updated today as I just got mine today... But that was the one thing I hated to let go from my note 7 now I literally have the best of both worlds... This is thee best smart watch I've used right down to build quality.
Click to expand...
Click to collapse
Samsung publicly tweeted that Samsung Pay works on the S3 on any Android device running Kitkat or later.
jamgam said:
Have you guys gotten text messages and responding to work or is that Svoice and Samsung messaging app only?
Click to expand...
Click to collapse
The only issue I had was that Hangouts would not allow me to reply until I installed Android Wear. Counterintuitive I know, but it seems there are some parts in Android Wear that Hangouts needs to work with Samsung Gear.
coolhandz said:
I've had both paired for over a month now (since the S3 came out) and love it. The biggest feature for me was Samsung Pay since the S3 has MST support. The Gear app updated about a week after having it which worried me because I thought it would work right out of the box. Even with the Pixel XL rooted, running a custom kernel, and an unlocked bootloader, Pay works fine. You just have to sign back into the Samsung Pay app through the Gear app after every few purchases (which can get annoying when you're trying to be cool.). Anyway, once you set up S-Voice you can send texts through it. I am using Textra and it works fine. I would imagine it would work with stock messenger as well. I can also use S-Voice to make calls through the stock dialer. Haven't used it for emails yet.
There have been a few things on the watch that have bothered me. If I turn off the call feature (because taking calls through the watch is most times inconvenient) then turning the ring doesn't work to answer or reject calls. It would be nice if you were to turn it and the phone would answer in speaker mode. Also, my watch always locks on me. I think with the factory strap the watch rides up too high on my wrist and a tattoo there messes with the sensors and the watch thinks i'm not wearing it. It's annoying to have enter my pin everytime I want to look at a notification. I'm am ordering another strap which I hope will hold the watch closer to my wrist and tighter to the skin which I hope will help.
Battery life has been great with me, but I don't have LTE, Wi-Fi, or the AOD on. Through regular use from 0700-2200, I put it on the charger and it has 87% life left on average.
At the end of the day, I love it. I just wish Samsung would ditch Tizen and go with Android Wear. I'm sure they could make Samsung Pay work with Wear.
Click to expand...
Click to collapse
How did you install S-Voice? Download apk and install?? I don't see it in play store
jamgam said:
How did you install S-Voice? Download apk and install?? I don't see it in play store
Click to expand...
Click to collapse
S voice is on the watch only. You can download it through the Gear Manager app.
coolhandz said:
S voice is on the watch only. You can download it through the Gear Manager app.
Click to expand...
Click to collapse
Cool thanks, last question for now. Do you have a messaging app on the apps screen? Is that possible?
Hi
Most annoying issue for me is when im trying to answer incoming call using phone call is passed via gear s3 anyway - all the time
Anybody has same issue? Any suggestions?
Samsung Pay wasn't working initially but around a month ago I updated the gear app and up it popped. No other issues to report as yet.
xiaomishmiaomi said:
Samsung Pay wasn't working initially but around a month ago I updated the gear app and up it popped. No other issues to report as yet.
Click to expand...
Click to collapse
So when you answering phone call using phone call is passed via phone or via watch?
Will Android Pay work on the Gear S3? I know, it sounds counter intuitive to use AP instead of SP but I've ran into situations before that no matter what I did, I couldn't get SP to work on an NFC payment terminal. Honestly, it's still so hit and miss I'd only really feel like messing with mobile payments via NFC which for me goes back to Android Pay.
Is there still those problems available with the s3 or everything is gone cause am planning to get one if everything is fixed!
farfromovin said:
Will Android Pay work on the Gear S3? I know, it sounds counter intuitive to use AP instead of SP but I've ran into situations before that no matter what I did, I couldn't get SP to work on an NFC payment terminal. Honestly, it's still so hit and miss I'd only really feel like messing with mobile payments via NFC which for me goes back to Android Pay.
Click to expand...
Click to collapse
I didn't know they had AP for the S3. I mean I don't think they do.
---------- Post added at 11:25 PM ---------- Previous post was at 11:24 PM ----------
wojtas29 said:
So when you answering phone call using phone call is passed via phone or via watch?
Click to expand...
Click to collapse
If you have phone audio ticked in the bt profile audio goes through the watch.
---------- Post added at 11:26 PM ---------- Previous post was at 11:25 PM ----------
Mubarac said:
Is there still those problems available with the s3 or everything is gone cause am planning to get one if everything is fixed!
Click to expand...
Click to collapse
Works fine for me
Disable LTE?
jamgam said:
Battery life has been great with me, but I don't have LTE, Wi-Fi, or the AOD on
Click to expand...
Click to collapse
I'm considering buying one of these. I would sometimes want LTE capability, but would mostly want to turn it off to preserve battery. It sounds like you've got an advanced setup. Also, you mentioned being able to disable LTE. Is the option to disable LTE available to regular (non-advanced) folks like me?
Thanks in advance!
a789877 said:
I'm considering buying one of these. I would sometimes want LTE capability, but would mostly want to turn it off to preserve battery. It sounds like you've got an advanced setup. Also, you mentioned being able to disable LTE. Is the option to disable LTE available to regular (non-advanced) folks like me?
Thanks in advance!
Click to expand...
Click to collapse
The device has a smart network function that disables the mobile radio while the Bluetooth connection is active. Then once you don't have a Bluetooth connection for like thirty seconds it enables it
In my first attempt at setting it up, it looked as though the "bluetooth only" model SM-R760 wasn't going to support text msgs with my Pixel XL. I reset the watch and did the setup again, and still no messaging app. Later discovered it DOES support text messaging with my Pixel, but only receive and respond. You cannot originate a message on the watch. A small compromise. It was confusing at first. But glad I don't have to pay more for a carrier supported model to have SMS on my Gear S3.

Samsung Gear Active 2 (wearable app on pixel 3 XL)

I've been looking for an answer for this for a while but couldn't find anything, not even Samsung was of any help, as they said the active 2 watch doesn't work well with pixel 3, even though online o saw multiple people using it without issues.
So the thing is I've owned a gear S3 for 2 years, working great from Pixel 2 XL to 3 XL. I just bought a newer version of The watch, the active 2. The app couldn't find it, so I tried uninstalling it, and finding out I couldn't install it again. I keep getting an error message from Google play saying the app couldn't be installed. I tried downloading the apk for the app, but also got a "app not installed" message. Now I can't use the watch. I can still install the old apk, that doesn't find the watch. But can't get a later version because nothing will install. I can't even install the active 2 plugin, either through the app store or from an apk. Not sure what else to do. I really like the watch and didn't want to go back using my old one
I have the same watch, with pixel 3 xl, everything works as expected here..
@DeskPixel what rom are you using? I noticed that kind of thing happen when I was using custom roms, but everything was fine on the official rom.
I'm currently running Havoc and have not come across any issues with my Active2

Categories

Resources