Hi all
I bought an Eonon G2110F QuadCore Android 4.4.4., S07, Mcu KLD2 V 2.77 a couple months ago. I installed the head unit in my car and flashed Malaysk's firmware RK3188 800X480 for Sept 2015. I left the MCU stock. For two months the headunit operated great. This week I started the car and the head unit began booting like normal but stopped at the Nissan logo and would not finish booting. I re-flashed Malaysk's firmware twice in recovery. Each time it looked as if the firmware flash was running properly. When the flashed finished and the head unit started the reboot process, the software would stop at the Nissan logo screen and not go any further. I'm not sure what to do at this point. Any suggestions.
Enter recovery and do a factory restore (wipe data and cache). This should fix the issue.
You will then have to reinstall your apps, though.
Related
Hello, friends.
My HU was working fine with latest Malaysk rom. But suddenly the HU keeps stuck in boot screen, with android logo (Malaysk mod), as in a loop or something like this.
I don't know why it happened, but now is impossible to access recovery screen to try wipe ans reinstall firmware. The combination reset+pwr button does not work anymore.
Could somebody help? Suggestions?
Best regards
Paulo
I am having issues with booting into recovery the screen is just black, I was wondering if you resolved your issue
jmphillips76 said:
I am having issues with booting into recovery the screen is just black, I was wondering if you resolved your issue
Click to expand...
Click to collapse
Also having similar issues with my 3188 with the latest Malaysk ROM. I need to get into recovery so I can flash something else!
When I get into recovery I can't see anything on the screen and the lights on the side of my radio just pulsate light blue until I restart the unit.
Everything was fine for a couple days after I flashed, and out of nowhere I start having these issues...
ahfunaki said:
Also having similar issues with my 3188 with the latest Malaysk ROM. I need to get into recovery so I can flash something else!
When I get into recovery I can't see anything on the screen and the lights on the side of my radio just pulsate light blue until I restart the unit.
Everything was fine for a couple days after I flashed, and out of nowhere I start having these issues...
Click to expand...
Click to collapse
Same thing happen to me. Last working rom was malaysk latest fuse rom. Did you solve your issue?
Hello all,
I have installed custom roms, and after I turn of car and start it again for a few hour units boots, last application - radio is going up, but I cannot run others appk, buttoms are working perfectly, but unit in inactive to my fingers touch. I have to push power on for a few second and start unit again, unit boots into recovery, I confirm restart unit and after boot all works perfectly. But after I stop the car for a few hours, still the same.
I tried malasky rom, DSA rom and still the same.
Regards,
Jiri
I have KLD HU with malaysk rom 4.4.4 latest update firm.
Before I start my car, I turn on bluetooth on my phone, and then start the car.
Then android logo shows, sometimes suddenly ERROR! shows on the screen and rollback itself.
It's inconvinient I have to pair my phone after HU boots completely.
My phone is Xiaomi mi5s+ with eu weekly room(marshmellow, nougot)
Is anyone can fix this problom? Please help.
I recently did a screen & speaker replacement on my oneplus 3.
The device worked for roughly one week with a bit of a touch latency issue. I just assumed the replacement screen was not as good quality as original.
However while downloading an update my screen went black, my battery had sufficient charge i could reboot into recovery but whenever i start up the device the screen would freeze and/ go completely dark immediately or 30 seconds after booting up. The phone does not freeze when in fastboot or recovery mode.
I have tried downgrading my oos version... and also upgrading it to the latest version(currently on latest version) but with each version i encounter the same issue.
The top quarter the screen becomes warm only when the phone boots up and freezes shortly after then.
Phone is is completely stock and has never been rooted/ had bootloader unlocked....
Hi All,
I am having issues with my FireTV Box Gen 1 (Bueller). The issue is when i turn off the TV and the box basically after 30 minutes or so, reboots and goes to recovery and get stuck there. I have to reset it by pulling power to bring it to the OS. When rebooted, it will work fine, but when i turn off the TV, it does same thing.
FireTV Gen 1 is Rooted and using rbox’s latest and last update. Bootloader is fully unlocked and TWRP is installed.
I have formatted and installed the OS and same issue.
Is there a way to fix this? if yes, please advise
If no to above, can i revert back to Stock Recovery? if yes, how?
I tried searching form, i can only find unroot option if you have clockwork recovery
nycelitemaster said:
Hi All,
I am having issues with my FireTV Box Gen 1 (Bueller). The issue is when i turn off the TV and the box basically after 30 minutes or so, reboots and goes to recovery and get stuck there. I have to reset it by pulling power to bring it to the OS. When rebooted, it will work fine, but when i turn off the TV, it does same thing.
Click to expand...
Click to collapse
If you mean the bootmenu cold-boots into twrp instead fireOS, try wiping cache...
i figured it out. there was an update pending latest update. somehow rbox modded firmware downloaded that and it was scheduling to install. i cleared the cache and disabled ota and took care of it.