I have KLD HU with malaysk rom 4.4.4 latest update firm.
Before I start my car, I turn on bluetooth on my phone, and then start the car.
Then android logo shows, sometimes suddenly ERROR! shows on the screen and rollback itself.
It's inconvinient I have to pair my phone after HU boots completely.
My phone is Xiaomi mi5s+ with eu weekly room(marshmellow, nougot)
Is anyone can fix this problom? Please help.
Related
Hi all
I bought an Eonon G2110F QuadCore Android 4.4.4., S07, Mcu KLD2 V 2.77 a couple months ago. I installed the head unit in my car and flashed Malaysk's firmware RK3188 800X480 for Sept 2015. I left the MCU stock. For two months the headunit operated great. This week I started the car and the head unit began booting like normal but stopped at the Nissan logo and would not finish booting. I re-flashed Malaysk's firmware twice in recovery. Each time it looked as if the firmware flash was running properly. When the flashed finished and the head unit started the reboot process, the software would stop at the Nissan logo screen and not go any further. I'm not sure what to do at this point. Any suggestions.
Enter recovery and do a factory restore (wipe data and cache). This should fix the issue.
You will then have to reinstall your apps, though.
Hello, friends.
My HU was working fine with latest Malaysk rom. But suddenly the HU keeps stuck in boot screen, with android logo (Malaysk mod), as in a loop or something like this.
I don't know why it happened, but now is impossible to access recovery screen to try wipe ans reinstall firmware. The combination reset+pwr button does not work anymore.
Could somebody help? Suggestions?
Best regards
Paulo
I am having issues with booting into recovery the screen is just black, I was wondering if you resolved your issue
jmphillips76 said:
I am having issues with booting into recovery the screen is just black, I was wondering if you resolved your issue
Click to expand...
Click to collapse
Also having similar issues with my 3188 with the latest Malaysk ROM. I need to get into recovery so I can flash something else!
When I get into recovery I can't see anything on the screen and the lights on the side of my radio just pulsate light blue until I restart the unit.
Everything was fine for a couple days after I flashed, and out of nowhere I start having these issues...
ahfunaki said:
Also having similar issues with my 3188 with the latest Malaysk ROM. I need to get into recovery so I can flash something else!
When I get into recovery I can't see anything on the screen and the lights on the side of my radio just pulsate light blue until I restart the unit.
Everything was fine for a couple days after I flashed, and out of nowhere I start having these issues...
Click to expand...
Click to collapse
Same thing happen to me. Last working rom was malaysk latest fuse rom. Did you solve your issue?
Hello all,
I have installed custom roms, and after I turn of car and start it again for a few hour units boots, last application - radio is going up, but I cannot run others appk, buttoms are working perfectly, but unit in inactive to my fingers touch. I have to push power on for a few second and start unit again, unit boots into recovery, I confirm restart unit and after boot all works perfectly. But after I stop the car for a few hours, still the same.
I tried malasky rom, DSA rom and still the same.
Regards,
Jiri
Hello everyone
My G3 (d855) (fulmics 8.0 ) started restating yesterday. when I turn it on, it restarts on lg logo before android come up and it stucks in a loop.
At first i thought it's a software issue and I did a factory reset usinng TWRP but still the same issue.
I reprogramed the same rom and then I programmed Official rom and still the same.
Today I found sth out. sometimes phone starts normally or after just one bootloop when the charger is pluged. so i think the battery may have problem.
I tried using a power supply to turn the phone without battery but it stuck again in bootloop. (phone draws 1.1A max)
any idea ?
Hi everyone,
My parents have a TCL U43P6036 (but hardware says P6046) that keeps shutting down at boot just after the dots animation/before the Android logo.
I don't have a clear backstory of the problems before this but I know the screen started to become darker on a side, there was also a moment when there was no image but the sound was working, and finally this problem of shutting down at boot.
It happens 100% of the time.
I tried a hard reboot but I'm not even sure the buttons under the screen are working for that purpose as there's not clear volume down button (the buttons are like "<", power/menu, ">"). And my attempts at a hard reboot all failed (Android says "error" and just reboots, then the TCL logo shows up and "error" again, etc.)
There's no reset button too, so I can't even try that.
Now I think the next step is trying to flash it but I'm not even sure of the version of Android. The manual says "Android N (7.0), O (8.0) Q3 ‘18 updt" but I don't know what it really says (is the OS Nougat 7 or Oreo 8?). I know some auto updates have been done.
Anyway, I'm stuck and not sure about the real problem here...
Update: tried to flash it but nothing happened at all. The TV starts like usual, then shuts down after the dots animation/before the Android logo... I don't even know if it detected the USB drive...