Related
Hello there,
I have a simple question, I'm sure most of you developers know how to help us all.
I have a NST not rooted (I don't really need for mods and stuff) but I would like to get rid of the manual and the quick start guide that really annoys me.
Is it possibile to create a zip (maybe an img would be even better) that starts ClockworkmodRecovery and then that includes a flashable zip that deletes the 2 epubs?
So that everyone can delete them once and for all. :laugh:
Let me know if I can help you.
Perhaps it would be better to download and install a root explorer (such as ES File Explorer) and use it to browse and delete these epub files.
Sent from my Nexus 7 using Tapatalk 4 Beta
mikey242 said:
Perhaps it would be better to download and install a root explorer (such as ES File Explorer) and use it to browse and delete these epub files.
Sent from my Nexus 7 using Tapatalk 4 Beta
Click to expand...
Click to collapse
well, that includes rooting, installing a launcher, installing a program...
i thought that a zip that does it without rooting and without anything permanent on the device would be better.
borzowsky said:
well, that includes rooting, installing a launcher, installing a program...
i thought that a zip that does it without rooting and without anything permanent on the device would be better.
Click to expand...
Click to collapse
I make what you asked for, find it enclosed. It is a zip update for CWM. I guess you know how to proceed but I've left instructions below for those who face this issue for first time:
1. Make a backup of your NST with noogie following this instructions.
2. Download the file enclosed within this post.
3. Burn 2gb_clockwork-rc2.img file to be written on a SD-Card using Win32DiskImager or dd on linux.
4. Open the SD-Card (where you burn 2gb_clockwork-rc2.img) and copy the DeletingEpubGuides.zip on the SD-Card.
5. Power down and insert the SD-Card on the NST.
6. Press the power button for 3 seconds, so that the device boots (you don't have to hold the power button after the 3 seconds)
7. As soon as the display changes to the "CWM logo" screen, push and hold the lower left and the lower right button until the screen changes again. Wait until you see the recovery. Hence, you'll be already booted into Clockworkmod recovery (Button layout: Both Buttons on the left: BACK / Upper button on the right: UP / Lower button on the right: DOWN / n button: SELECT / Power button: TOGGLE DISPLAY).
8. Install through CWM recovery the DeletingEpubGuides.zip update placed on the SD-Card. When you'll read "Done" press power button during 10 second and eject the SD-card.
9. Press power button to turn on the nook to let the devices open commonly.
I've just tested it over my NST v1.1.2 and works without problem.
Best.
kuskro said:
I make what you asked for, find it enclosed. It is a zip update for CWM. I guess you know how to proceed but I've left instructions below for those who face this issue for first time:
1. Make a backup of your NST with noogie following this instructions.
2. Download the file enclosed within this post.
3. Burn 2gb_clockwork-rc2.img file to be written on a SD-Card using Win32DiskImager or dd on linux.
4. Open the SD-Card (where you burn 2gb_clockwork-rc2.img) and copy the DeletingEpubGuides.zip on the SD-Card.
5. Power down and insert the SD-Card on the NST.
6. Press the power button for 3 seconds, so that the device boots (you don't have to hold the power button after the 3 seconds)
7. As soon as the display changes to the "CWM logo" screen, push and hold the lower left and the lower right button until the screen changes again. Wait until you see the recovery. Hence, you'll be already booted into Clockworkmod recovery (Button layout: Both Buttons on the left: BACK / Upper button on the right: UP / Lower button on the right: DOWN / n button: SELECT / Power button: TOGGLE DISPLAY).
8. Install through CWM recovery the DeletingEpubGuides.zip update placed on the SD-Card. When you'll read "Done" press power button during 10 second and eject the SD-card.
9. Press power button to turn on the nook to let the devices open commonly.
I've just tested it over my NST v1.1.2 and works without problem.
Best.
Click to expand...
Click to collapse
thank you very much, is it working on 1.2.1?
what is the path of the files that are deleted?
borzowsky said:
thank you very much, is it working on 1.2.1?
what is the path of the files that are deleted?
Click to expand...
Click to collapse
/system/media/books/
Success! (1.2.1)
borzowsky said:
thank you very much, is it working on 1.2.1?
what is the path of the files that are deleted?
Click to expand...
Click to collapse
I'm running 1.2.1, and I found them at /system/assets/userguides/standard/ . (There's also a /glowlight/ folder in the /userguides/ directory, FWIW.)
EDIT: However, deleting them there doesn't seem to remove them from the library. And I can't find the /system/media/books folder. Hmmm...
EDIT AGAIN: Also found them in /data/cloud_assets/books/userguides . Deleting, rebooting, and will report back here if that did it.
LAST EDIT I SWEAR: SUCCESS! Deleting them from all the locations listed above made them vanish from the library.
Does GB modify system? I have systemless root and Xposed and wanted to know if it will remain OK with GB. Thx.
Device: OnePlus 3
Android 6.0.1
Familotel said:
Does GB modify system? I have systemless root and Xposed and wanted to know if it will remain OK with GB. Thx.
Device: OnePlus 3
Android 6.0.1
Click to expand...
Click to collapse
looking for the answer from some experts here too...
Am using systemless xposed n root. And GB work fine
Xposed modules never modify any system files - that's the principle of Xposed! You can always uninstall modules, and then always everything is as before!
Most options in GB work fine -however the QuickSettings section and the hardware button functions have issues.
HoTsHoT89 said:
Most options in GB work fine -however the QuickSettings section and the hardware button functions have issues.
Click to expand...
Click to collapse
what is issue with hardware buttons?.
May be i can help you
JumboMan said:
what is issue with hardware buttons?.
May be i can help you
Click to expand...
Click to collapse
Configuring long press or double press for the hardware buttons in GB does not work for me. I can only change them in the Settings menu which has limited choices.
Are you able to change them via GB?
HoTsHoT89 said:
Configuring long press or double press for the hardware buttons in GB does not work for me. I can only change them in the Settings menu which has limited choices.
Are you able to change them via GB?
Click to expand...
Click to collapse
You have to edit Generic.kl file located at system/usr/keylayout.
You have to edit key 127,139,158,580.
Add VIRTUAL to this key.
for example -
original - key 158 BACK
Modified - key 158 BACK VIRTUAL
==
edit this file with any root enabled file explorer (e.g Root explorer,solid explorer).
Apply proper permissions (0644) to file and reboot the phone.
Now you can assign any custom shortcut to any hardware key through GravityBox.
mysky911 said:
looking for the answer from some experts here too...
Click to expand...
Click to collapse
I installed it, but when an OTA came, it knew i was rooted.
JumboMan said:
You have to edit Generic.kl file located at system/usr/keylayout.
You have to edit key 127,139,158,580.
Add VIRTUAL to this key.
for example -
original - key 158 BACK
Modified - key 158 BACK VIRTUAL
==
edit this file with any root enabled file explorer (e.g Root explorer,solid explorer).
Apply proper permissions (0644) to file and reboot the phone.
Now you can assign any custom shortcut any hardware key through GravityBox.
Click to expand...
Click to collapse
Thank you for the explanation.
As I understand from your previous posts, modifying the file, hence modifying /system will break OTAs. On my phone, /system is still untouched - is it possible to keep a backup for the Generic.kl file and restore the original backup for the OTA installation to work again when a new OTA arrives?
HoTsHoT89 said:
Thank you for the explanation.
As I understand from your previous posts, modifying the file, hence modifying /system will break OTAs. On my phone, /system is still untouched - is it possible to keep a backup for the Generic.kl file and restore the original backup for the OTA installation to work again when a new OTA arrives?
Click to expand...
Click to collapse
No.
once you mounted /system partition rw, OTA will fail even if you have not done anything thing with system partition.
There are apps (search for button remaper in play store) which don't requires root to change shortcuts of hardware buttons
Familotel said:
Does GB modify system? I have systemless root and Xposed and wanted to know if it will remain OK with GB. Thx.
Device: OnePlus 3
Android 6.0.1
Click to expand...
Click to collapse
No it doesn't. It won't modify your system files.
To disable all tweaks:
Just disable (uncheck) it from xposed module list and all tweaks will be disabled.
JumboMan said:
You have to edit Generic.kl file located at system/usr/keylayout.
You have to edit key 127,139,158,580.
Add VIRTUAL to this key.
for example -
original - key 158 BACK
Modified - key 158 BACK VIRTUAL
==
edit this file with any root enabled file explorer (e.g Root explorer,solid explorer).
Apply proper permissions (0644) to file and reboot the phone.
Now you can assign any custom shortcut any hardware key through GravityBox.
Click to expand...
Click to collapse
Thanks a lot for this useful informations! (I also hit Thanks btw)
minigreen said:
Most options in GB work fine -however the QuickSettings section and the hardware button functions have issues.
Click to expand...
Click to collapse
GB messes badly with quick settings.
For hardware button function see my reply here http://forum.xda-developers.com/showpost.php?p=68477822&postcount=8
I just got a OP3 and have also noticed problems with the quick settings.
I dont know if I broke it by attempting to modify in GB but I can't seem to modify my quick settings properly from either GB or the OnePlus settings anymore.
Unticking "NFC" for instance in either settings isn't making it go away. No way around this, eh?
NinetoFive said:
I just got a OP3 and have also noticed problems with the quick settings.
I dont know if I broke it by attempting to modify in GB but I can't seem to modify my quick settings properly from either GB or the OnePlus settings anymore.
Unticking "NFC" for instance in either settings isn't making it go away. No way around this, eh?
Click to expand...
Click to collapse
quick settings don't work properly on GB.
JumboMan said:
You have to edit Generic.kl file located at system/usr/keylayout.
You have to edit key 127,139,158,580.
Add VIRTUAL to this key.
for example -
original - key 158 BACK
Modified - key 158 BACK VIRTUAL
==
edit this file with any root enabled file explorer (e.g Root explorer,solid explorer).
Apply proper permissions (0644) to file and reboot the phone.
Now you can assign any custom shortcut to any hardware key through GravityBox.
Click to expand...
Click to collapse
i tried it on my oneplus 3t and it works great. thanks a lot!
JumboMan said:
You have to edit Generic.kl file located at system/usr/keylayout.
You have to edit key 127,139,158,580.
Add VIRTUAL to this key.
for example -
original - key 158 BACK
Modified - key 158 BACK VIRTUAL
==
edit this file with any root enabled file explorer (e.g Root explorer,solid explorer).
Apply proper permissions (0644) to file and reboot the phone.
Now you can assign any custom shortcut to any hardware key through GravityBox.
Click to expand...
Click to collapse
is there any way on nougat to reasign hardware keys with new functions with this trick? without gravitybox ofc since xposed isnt released yet for nougat.
MarcTremonti said:
is there any way on nougat to reasign hardware keys with new functions with this trick? without gravitybox ofc since xposed isnt released yet for nougat.
Click to expand...
Click to collapse
no
Hi,
As you probably know we can't acces to the hidden menu "EngineerMode" to increase the speaker volume... until now
I succefully modified the app to work on rooted XA :good:
I will not explain how to use this dangerous menu, you can find many guides for that.
How to install:
- Download the attached zip, copy the 3 folders to "/system/app" and reboot.
- On the phone dialer enter *#*#3646633#*#*, the menu will appear.
- Don't forget to make backups of your partitions before playing with this !
Some features are greyed because of missing apps, I don't know if it's usefull to try to add them ?
rrvuhpg said:
Hi,
As you probably know we can't acces to the hidden menu "EngineerMode" to increase the speaker volume... until now
I succefully modified the app to work on rooted XA :good:
I will not explain how to use this dangerous menu, you can find many guides for that.
How to install:
- Download the attached zip, copy the 3 folders to "/system/app" and reboot.
- On the phone dialer enter *#*#3646633#*#*, the menu will appear.
- Don't forget to make backups of your partitions before playing with this !
Some features are greyed because of missing apps, I don't know if it's usefull to try to add them ?
Click to expand...
Click to collapse
I've installed the folders and tried to change the value for increase volume in audio/headset mode (increasing the value 124 to 160) but i don't notice any different
Evedammo said:
I've installed the folders and tried to change the value for increase volume in audio/headset mode (increasing the value 124 to 160) but i don't notice any different
Click to expand...
Click to collapse
Yes you right, just tested on the last firmware and no changes in volume level. On my previous tests I'm sure it worked but on what firmware version and as said before when worked my rom was heavily modified. Maybe it need something more to work, I will try to find why.
rrvuhpg said:
Hi,
As you probably know we can't acces to the hidden menu "EngineerMode" to increase the speaker volume... until now
I succefully modified the app to work on rooted XA :good:
I will not explain how to use this dangerous menu, you can find many guides for that.
How to install:
- Download the attached zip, copy the 3 folders to "/system/app" and reboot.
- On the phone dialer enter *#*#3646633#*#*, the menu will appear.
- Don't forget to make backups of your partitions before playing with this !
Some features are greyed because of missing apps, I don't know if it's usefull to try to add them ?
Click to expand...
Click to collapse
Hey,
I've copied all 3 folders as you said but I still can't access the egineer menu to deactivate some LTE bands.
How have you managed to get into the Engineer Menu? Is there a trick or something?
felixkruemel said:
Hey,
I've copied all 3 folders as you said but I still can't access the egineer menu to deactivate some LTE bands.
How have you managed to get into the Engineer Menu? Is there a trick or something?
Click to expand...
Click to collapse
Hi,
This thread was created on december 2016, you have to downgrade your phone to a Marshmallow firmware older than that.
I don't remember if it works on later M firmware but I'm sure that will not works on Nougat.
rrvuhpg said:
Hi,
This thread was created on december 2016, you have to downgrade your phone to a Marshmallow firmware older than that.
I don't remember if it works on later M firmware but I'm sure that will not works on Nougat.
Click to expand...
Click to collapse
Thanks for the answer despite the old thread.
Is there no way to access it in the Nougat firmware? What a bullsh*t Sony did with that then.
To downgrade the phone I would need to get the MM Firmware from anywhere. Do you have any link for it? Would reformatting and flashing it through TWRP be enough to get it to boot?
felixkruemel said:
Thanks for the answer despite the old thread.
Is there no way to access it in the Nougat firmware? What a bullsh*t Sony did with that then.
To downgrade the phone I would need to get the MM Firmware from anywhere. Do you have any link for it? Would reformatting and flashing it through TWRP be enough to get it to boot?
Click to expand...
Click to collapse
There is probably a way to acces it with Nougat but you have to find updated MTK apps.
To downgrade you have to download the firmware with Xperifirm inclued in Flashtool. Be careful with Flashtool, read/watch guides on how to flash firmware to avoid hard brick.
rrvuhpg said:
Hi,
As you probably know we can't acces to the hidden menu "EngineerMode" to increase the speaker volume... until now
I succefully modified the app to work on rooted XA :good:
I will not explain how to use this dangerous menu, you can find many guides for that.
How to install:
- Download the attached zip, copy the 3 folders to "/system/app" and reboot.
- On the phone dialer enter *#*#3646633#*#*, the menu will appear.
- Don't forget to make backups of your partitions before playing with this !
Some features are greyed because of missing apps, I don't know if it's usefull to try to add them ?
Click to expand...
Click to collapse
I'm sorry, I can't find where the file 'App' inside any of my 3 'System' folders are, can you please help?
felixkruemel said:
Hey,
I've copied all 3 folders as you said but I still can't access the egineer menu to deactivate some LTE bands.
How have you managed to get into the Engineer Menu? Is there a trick or something?
Click to expand...
Click to collapse
Did you find the system folder where an 'app' file is meant to be in and then placed them in there? If so then type in the code that was given in the original thread and the menu will appear
QUESTION: how did you find the 'system' folder where the 'app' folder is? Please help
HISENSE A2 (6.03 )
https://forum.xda-developers.com/showthread.php?t=3673945
global rom flashing guid and image. this is very good.
but too old version, so e-ink support poor version.
so I made custom system.img from (https://forum.xda-developers.com/showthread.php?t=3673945)
instruction.
1. update a2 to 6.09
1.1. first HISENSE A2 version update to latest version(6.09)
https://pan.baidu.com/s/1cfHYMy
Password: 15k5
1.2. down load and copy SdCard root `A2.bin`
1.3 power off phone
1.4 volume up + volume down and power button
if success sd card upgrade mode begin.
2. write my system.img for (6.09)
here is my hisense a2 'system.img'
https://drive.google.com/file/d/0Bzis7hPFLtDbX0xMWUNwNmdBYTA/view
extract and flashing previous A2 GUIDE.
3. after phone setup you must factory reset.
* simple edl mode enter able hisense a2 when debugging mode.
`adb reboot edl`
and use QFIL flashing
* menu language support only ch and eng.
thank you very much
In addition, can you add multi language, I want to add Japanese, thank you.
multi language can use with molocale2
I tried but too unstable.
you can use molocale2 change any language.
joygram said:
I tried but too unstable.
you can use molocale2 change any language.
Click to expand...
Click to collapse
After using molocale2, I set it in Japanese, but most of the menus are still in English. Only the menu of Google is in japanese. Unable to use properly.Also, can you tell me how this ROM was modified?
Thanks
In addition, the ROM has a bug, when the input *1973461# into the System info menu, will be black screen, no display, the touch failed.
chenrenying said:
After using molocale2, I set it in Japanese, but most of the menus are still in English. Only the menu of Google is in japanese. Unable to use properly.Also, can you tell me how this ROM was modified?
Thanks
Click to expand...
Click to collapse
the menu languahe in the vision-setting.apk
if you add new language. you should modify vision-setting.apk
and add translated strings.
it cannot system.img write directly. because latest system.img not opened.
I just copy latest rom files to system.img
chenrenying said:
In addition, the ROM has a bug, when the input *1973461# into the System info menu, will be black screen, no display, the touch failed.
Click to expand...
Click to collapse
you do not enter sysyem mode
only use
adb reboot edl
if you bricked.
recover with sdcard recovery with vol up + vol dn
step
1. press power button about 30 second longer.
2. volume up + volume down and power button.
then show SDCARD firmware update.
a2.bin file in sd card root. (It may be 6.09 version)
3. enter edl mode with adb command
you should debugging mode enabled.
and
adb reboot edl
4. then use QFIL .
thank you very much
chenrenying said:
thank you very much
Click to expand...
Click to collapse
you are welcome
joygram said:
you are welcome
Click to expand...
Click to collapse
This ROM removed a lot of app, but these China of users is useful, can you help me to do a Google only add Rom? Only based on the official ROM on Google can be added, or can you tell me how to add gapps, thank you very much.
chenrenying said:
This ROM removed a lot of app, but these China of users is useful, can you help me to do a Google only add Rom? Only based on the official ROM on Google can be added, or can you tell me how to add gapps, thank you very much.
Click to expand...
Click to collapse
I am not remove the apps intentionally.
but side effect.
some apps confilct library so can not recognize. and generating system error. so I removed.
(weather app and some e-ink apps)
I'm very sorry :<
Hi,
I tried to update using the A2.rar file. This file seems to be password protected. 55933 seems to work here.
--
With the system image, at first I wondered how to flash this. After unpacking the file and following the instructions given in the above mentioned guide (https://forum.xda-developers.com/sho....php?t=3673945) it worked fine.
Using qfil I selected flat build, found the *firehose* file in the extracted directory and also the xml files (rawprogramm and patch) you have to select. Starting qfil phone was recognized as Hisense... at COM12 during the process it changed to Qualcomm... at COM13. I did not use adb commands (this did not work for me). For me qfil put the phone automatically in download mode.
Up to now all works fine. Menus are in english, some might be in chinese. Gapps, gmail and my old apps installed ok.
Thanks again to joygram
Password for archive is wrong?
@baistan the a2 file for the general system upgrade to 6.09.03 is hosted at a baidu site. You need the pw given by joygram to enter his baidu account. Then you have to install a baidu download client, because the file is 1.48 GB. The file itsself is a .rar archive, which is password protected. I googled the file and found a chinese hisense fans forum. Here a file with the same name was posted. pw was given with 55933
So you need two passwords.
The new rom is only chinese / english and has no gapps.
Joygrams system.img installed fine. GoogleApps workt about two days for me, now it crashed and does not start any more, maybe because of a playstore update. This seems to be common. Maybe this issue can be solved.
Here a google drive linke to the file (makes it easier) https://drive.google.com/open?id=11anmiy8FEQNbVzu9kbS72WKFr-zmHope
Have not got playstore to run again,
flashed the A2 rom again
and use f-droid; uptodown and/or yalp store to install apps.
Thank you
Do you think it is possible to install " 7.0 or CYANOGEN MULTILINGUE " with the support of the " E-INK " screen?
That I cann not tell you. I am no developer, sadly.
I do not know if anyone got TWRP running on this phone. I know, that it is possible to customize TWRP, there are examples on youtube, but I do not know if I am able to do it.
For me it would be interesting to flash gapps. I don´t know if you can do this using qpst.
I hope there is some development for this phone in the future.
OF_Ge_72 said:
That I cann not tell you. I am no developer, sadly.
I do not know if anyone got TWRP running on this phone. I know, that it is possible to customize TWRP, there are examples on youtube, but I do not know if I am able to do it.
For me it would be interesting to flash gapps. I don´t know if you can do this using qpst.
I hope there is some development for this phone in the future.
Click to expand...
Click to collapse
the ROM "JOYGRAM" is in English and Chinese!
By against the Playstore works very well you do not turn off your phone!
from the moment you turned off your phone the factory "Google Play Services" !!
Ducout you must be very careful never to crash and do not repel if the application that works with "Google Play Services" (youtube, play store, gmail, etc ...) no longer works!
we are unable to delete the account [email protected] and "conscious"
I think he should root the phone and add Google Play Service and Play Store!
but I do not know how to sit for root on HISENSE!
I would like to find a charitable soul who could help me carry a Rom Stock 6.0 from Google and add on Driver and E-Ink!
or take the ROM of the HISENSE A2PRO 7.0 Nougat and change it for the Hisense A2 because unless I'm wrong there is not much difference between the 2 phones!
PS: "JOYGRAM" recommend this for translation: you may want to set the language in Japan, French etc ...
this language in the Vision-Setting.apk
I tried to edit this file.
but the system does not start, so I stopped.
but some can stay.
1. Copy Vision-Setting.apk to pc
Use decompile with apktool
3. add a new language in the res and translate the language
4. repack the copy in system.img
I wrote system.img with the Linux system mount in the virtual machine.
I can not do perfact system.img because there is no last system.img.
OF_Ge_72 said:
@baistan the a2 file for the general system upgrade to 6.09.03 is hosted at a baidu site. You need the pw given by joygram to enter his baidu account. Then you have to install a baidu download client, because the file is 1.48 GB. The file itsself is a .rar archive, which is password protected. I googled the file and found a chinese hisense fans forum. Here a file with the same name was posted. pw was given with 55933
So you need two passwords.
The new rom is only chinese / english and has no gapps.
Joygrams system.img installed fine. GoogleApps workt about two days for me, now it crashed and does not start any more, maybe because of a playstore update. This seems to be common. Maybe this issue can be solved.
Here a google drive linke to the file (makes it easier) https://drive.google.com/open?id=11anmiy8FEQNbVzu9kbS72WKFr-zmHope
Click to expand...
Click to collapse
Good evening "OF_Ge_72"
think you can put on google the other version available on fans.hisense because being in France it is impossible for me to download the possible version available on fans.hisense !
because to answer and to Download on Fans.hisense it is necessary to register with a number of Chinese telephone and it is the same for Baidu !
A huge thank you for all
how about e76MINI
could you make it with E76MINI.41 ROM, i really need the GAPPS.here is official firmware link: dwz.cn/77wmyT unzip password 20171124
also maybe could tell me how to do,i will do it myself.my email is [email protected]
xingchenfei said:
could you make it with E76MINI.41 ROM, i really need the GAPPS.here is official firmware link: dwz.cn/77wmyT unzip password 20171124
also maybe could tell me how to do,i will do it myself.my email is [email protected]
Click to expand...
Click to collapse
Hello
did you try with a VPN and download / install Google Play Services and Google playstore?
by the way I take advantage of your passage to ask you if you have access to the forum: fans.hisense.com? (because I'm looking to download the version: http://fans.hisense.com/forum.php?mod=viewthread&tid=123020&highlight=A2+L1261)
Thank you
joygram said:
HISENSE A2 (6.03 )
1. update a2 to 6.09
1.1. first HISENSE A2 version update to latest version(6.09)
Password: 15k5
1.2. down load and copy SdCard root `A2.bin`
1.3 power off phone
1.4 volume up + volume down and power button
if success sd card upgrade mode begin.
.
Click to expand...
Click to collapse
Thanks, but unfortunately the baidu link is down (as far as I understand it). Would it be possible to upload it elsewhere in order to keep your guide alive?
Hi, XDA members. If you have problem with FRP, or bootloop, just flash one of this firmwares, and get success!
Instructions:
1. Format your 4GB (or more) SD Card as Fat32.
2. Extract archive.
3. Put bin file into SD card.
4. Turn off Hisense F10, put SD card in.
5. Press Vol+ + Vol- + Power
6. You'll see Upgrade mode.
7. When upgrade completed, long press Power button and Enjoy!
Note1 . Battery must be minimum 50%.
Note 2. After upgrade it will take 4-5 minutes to load OS ,just be patient.
DOWNLOAD:
mega. nz/#!FYl2jJQK!5WaHVhh7gJ2VQCV3oDosF8nM8a76yoi3HXFGNWtGf_M
mega. nz/#!wzhHnTID!wDT2yJyukiEbEFmKRoKL9KRdAFkpaNd0EdQaYvyXZhA
Note 3: Because of I'm new user XDA blocked to post links. To dowload firmwares just remove SPACES from links
If you want to see your firmware version:
1. Vision settings
2. Turn on Talkback
3. Swipe your finger DOWN and RIGHT (L)
4. Talkback settings
5. Search Voice settings with Assistant
6. Open Youtube
7. When opening browser, select Chrome
8. Download Holo Launcher (or anyone)
9. Install and Open
10. Go to Settings and see your firmware version
Note that you cannot bypass frp with this way, because all modificiations blocked by FRP protection. Only way is to flash correct firmware.
Rauf_Baku said:
If you want to see your firmware version:
1. Vision settings
2. Turn on Talkback
3. Swipe your finger DOWN and RIGHT (L)
4. Talkback settings
5. Search Voice settings with Assistant
6. Open Youtube
7. When opening browser, select Chrome
8. Download Holo Launcher (or anyone)
9. Install and Open
10. Go to Settings and see your firmware version
Note that you cannot bypass frp with this way, because all modificiations blocked by FRP protection. Only way is to flash correct firmware.
Click to expand...
Click to collapse
great entry bro, welcome to greatest xda forums,where everyone help other and get help, i hope your journey will go good, how did you get these files?
hisense f10 fpr
goodday, concerning f10 firmware, how did you manage to get a andriod phone read a bin file from a sd card, tried it, but phone cant open file
markbeljoi said:
goodday, concerning f10 firmware, how did you manage to get a andriod phone read a bin file from a sd card, tried it, but phone cant open file
Click to expand...
Click to collapse
+1 same problem
markbeljoi said:
goodday, concerning f10 firmware, how did you manage to get a andriod phone read a bin file from a sd card, tried it, but phone cant open file
Click to expand...
Click to collapse
Remove battery, wait 30 sec,put it back and IMMEDIATELY press Vol+ Vol- Power. If not work, try Vol+ Power.
favzan choksi said:
great entry bro, welcome to greatest xda forums,where everyone help other and get help, i hope your journey will go good, how did you get these files?
Click to expand...
Click to collapse
Thanks. I have downloaded this file from gem-flash (it was not free
Rauf_Baku said:
Thanks. I have downloaded this file from gem-flash (it was not free
Click to expand...
Click to collapse
you are really great bro, boom boom entry bro, for those who are unable to flash hisense f10 with above firmware, hisense f10 has 3 model, we have 2 firmware, so its clear that your phone is 3rd type, anyone please post that 3rd firmware if you have
bricked phone
Hello, my phone bricked
I formatted sd card in FAT
uploaded bin file in sd card
But In upgrade mode its always says "No update file in TF card"
Hisense F10 WhatsApp error
Hey guys inhave this phone but every time i restart the device it also restarts WhatsApp. It goes back to the first initial screen and says that the version was last updated on July 2017. Anyone with a solution will be highly appreciated.
Flash Hisense F10
Howzit guys, my Hisense does not see the .bin file from SD card in boot menu. Did everything shown in the post?
Hi ！I want to know how to extract hisense ROM bin files. Please help me, thanks.
How to root hisense f10
Can someone help me with hisensef10 rooting problem