HISENSE A2 (6.03 )
https://forum.xda-developers.com/showthread.php?t=3673945
global rom flashing guid and image. this is very good.
but too old version, so e-ink support poor version.
so I made custom system.img from (https://forum.xda-developers.com/showthread.php?t=3673945)
instruction.
1. update a2 to 6.09
1.1. first HISENSE A2 version update to latest version(6.09)
https://pan.baidu.com/s/1cfHYMy
Password: 15k5
1.2. down load and copy SdCard root `A2.bin`
1.3 power off phone
1.4 volume up + volume down and power button
if success sd card upgrade mode begin.
2. write my system.img for (6.09)
here is my hisense a2 'system.img'
https://drive.google.com/file/d/0Bzis7hPFLtDbX0xMWUNwNmdBYTA/view
extract and flashing previous A2 GUIDE.
3. after phone setup you must factory reset.
* simple edl mode enter able hisense a2 when debugging mode.
`adb reboot edl`
and use QFIL flashing
* menu language support only ch and eng.
thank you very much
In addition, can you add multi language, I want to add Japanese, thank you.
multi language can use with molocale2
I tried but too unstable.
you can use molocale2 change any language.
joygram said:
I tried but too unstable.
you can use molocale2 change any language.
Click to expand...
Click to collapse
After using molocale2, I set it in Japanese, but most of the menus are still in English. Only the menu of Google is in japanese. Unable to use properly.Also, can you tell me how this ROM was modified?
Thanks
In addition, the ROM has a bug, when the input *1973461# into the System info menu, will be black screen, no display, the touch failed.
chenrenying said:
After using molocale2, I set it in Japanese, but most of the menus are still in English. Only the menu of Google is in japanese. Unable to use properly.Also, can you tell me how this ROM was modified?
Thanks
Click to expand...
Click to collapse
the menu languahe in the vision-setting.apk
if you add new language. you should modify vision-setting.apk
and add translated strings.
it cannot system.img write directly. because latest system.img not opened.
I just copy latest rom files to system.img
chenrenying said:
In addition, the ROM has a bug, when the input *1973461# into the System info menu, will be black screen, no display, the touch failed.
Click to expand...
Click to collapse
you do not enter sysyem mode
only use
adb reboot edl
if you bricked.
recover with sdcard recovery with vol up + vol dn
step
1. press power button about 30 second longer.
2. volume up + volume down and power button.
then show SDCARD firmware update.
a2.bin file in sd card root. (It may be 6.09 version)
3. enter edl mode with adb command
you should debugging mode enabled.
and
adb reboot edl
4. then use QFIL .
thank you very much
chenrenying said:
thank you very much
Click to expand...
Click to collapse
you are welcome
joygram said:
you are welcome
Click to expand...
Click to collapse
This ROM removed a lot of app, but these China of users is useful, can you help me to do a Google only add Rom? Only based on the official ROM on Google can be added, or can you tell me how to add gapps, thank you very much.
chenrenying said:
This ROM removed a lot of app, but these China of users is useful, can you help me to do a Google only add Rom? Only based on the official ROM on Google can be added, or can you tell me how to add gapps, thank you very much.
Click to expand...
Click to collapse
I am not remove the apps intentionally.
but side effect.
some apps confilct library so can not recognize. and generating system error. so I removed.
(weather app and some e-ink apps)
I'm very sorry :<
Hi,
I tried to update using the A2.rar file. This file seems to be password protected. 55933 seems to work here.
--
With the system image, at first I wondered how to flash this. After unpacking the file and following the instructions given in the above mentioned guide (https://forum.xda-developers.com/sho....php?t=3673945) it worked fine.
Using qfil I selected flat build, found the *firehose* file in the extracted directory and also the xml files (rawprogramm and patch) you have to select. Starting qfil phone was recognized as Hisense... at COM12 during the process it changed to Qualcomm... at COM13. I did not use adb commands (this did not work for me). For me qfil put the phone automatically in download mode.
Up to now all works fine. Menus are in english, some might be in chinese. Gapps, gmail and my old apps installed ok.
Thanks again to joygram
Password for archive is wrong?
@baistan the a2 file for the general system upgrade to 6.09.03 is hosted at a baidu site. You need the pw given by joygram to enter his baidu account. Then you have to install a baidu download client, because the file is 1.48 GB. The file itsself is a .rar archive, which is password protected. I googled the file and found a chinese hisense fans forum. Here a file with the same name was posted. pw was given with 55933
So you need two passwords.
The new rom is only chinese / english and has no gapps.
Joygrams system.img installed fine. GoogleApps workt about two days for me, now it crashed and does not start any more, maybe because of a playstore update. This seems to be common. Maybe this issue can be solved.
Here a google drive linke to the file (makes it easier) https://drive.google.com/open?id=11anmiy8FEQNbVzu9kbS72WKFr-zmHope
Have not got playstore to run again,
flashed the A2 rom again
and use f-droid; uptodown and/or yalp store to install apps.
Thank you
Do you think it is possible to install " 7.0 or CYANOGEN MULTILINGUE " with the support of the " E-INK " screen?
That I cann not tell you. I am no developer, sadly.
I do not know if anyone got TWRP running on this phone. I know, that it is possible to customize TWRP, there are examples on youtube, but I do not know if I am able to do it.
For me it would be interesting to flash gapps. I don´t know if you can do this using qpst.
I hope there is some development for this phone in the future.
OF_Ge_72 said:
That I cann not tell you. I am no developer, sadly.
I do not know if anyone got TWRP running on this phone. I know, that it is possible to customize TWRP, there are examples on youtube, but I do not know if I am able to do it.
For me it would be interesting to flash gapps. I don´t know if you can do this using qpst.
I hope there is some development for this phone in the future.
Click to expand...
Click to collapse
the ROM "JOYGRAM" is in English and Chinese!
By against the Playstore works very well you do not turn off your phone!
from the moment you turned off your phone the factory "Google Play Services" !!
Ducout you must be very careful never to crash and do not repel if the application that works with "Google Play Services" (youtube, play store, gmail, etc ...) no longer works!
we are unable to delete the account [email protected] and "conscious"
I think he should root the phone and add Google Play Service and Play Store!
but I do not know how to sit for root on HISENSE!
I would like to find a charitable soul who could help me carry a Rom Stock 6.0 from Google and add on Driver and E-Ink!
or take the ROM of the HISENSE A2PRO 7.0 Nougat and change it for the Hisense A2 because unless I'm wrong there is not much difference between the 2 phones!
PS: "JOYGRAM" recommend this for translation: you may want to set the language in Japan, French etc ...
this language in the Vision-Setting.apk
I tried to edit this file.
but the system does not start, so I stopped.
but some can stay.
1. Copy Vision-Setting.apk to pc
Use decompile with apktool
3. add a new language in the res and translate the language
4. repack the copy in system.img
I wrote system.img with the Linux system mount in the virtual machine.
I can not do perfact system.img because there is no last system.img.
OF_Ge_72 said:
@baistan the a2 file for the general system upgrade to 6.09.03 is hosted at a baidu site. You need the pw given by joygram to enter his baidu account. Then you have to install a baidu download client, because the file is 1.48 GB. The file itsself is a .rar archive, which is password protected. I googled the file and found a chinese hisense fans forum. Here a file with the same name was posted. pw was given with 55933
So you need two passwords.
The new rom is only chinese / english and has no gapps.
Joygrams system.img installed fine. GoogleApps workt about two days for me, now it crashed and does not start any more, maybe because of a playstore update. This seems to be common. Maybe this issue can be solved.
Here a google drive linke to the file (makes it easier) https://drive.google.com/open?id=11anmiy8FEQNbVzu9kbS72WKFr-zmHope
Click to expand...
Click to collapse
Good evening "OF_Ge_72"
think you can put on google the other version available on fans.hisense because being in France it is impossible for me to download the possible version available on fans.hisense !
because to answer and to Download on Fans.hisense it is necessary to register with a number of Chinese telephone and it is the same for Baidu !
A huge thank you for all
how about e76MINI
could you make it with E76MINI.41 ROM, i really need the GAPPS.here is official firmware link: dwz.cn/77wmyT unzip password 20171124
also maybe could tell me how to do,i will do it myself.my email is [email protected]
xingchenfei said:
could you make it with E76MINI.41 ROM, i really need the GAPPS.here is official firmware link: dwz.cn/77wmyT unzip password 20171124
also maybe could tell me how to do,i will do it myself.my email is [email protected]
Click to expand...
Click to collapse
Hello
did you try with a VPN and download / install Google Play Services and Google playstore?
by the way I take advantage of your passage to ask you if you have access to the forum: fans.hisense.com? (because I'm looking to download the version: http://fans.hisense.com/forum.php?mod=viewthread&tid=123020&highlight=A2+L1261)
Thank you
joygram said:
HISENSE A2 (6.03 )
1. update a2 to 6.09
1.1. first HISENSE A2 version update to latest version(6.09)
Password: 15k5
1.2. down load and copy SdCard root `A2.bin`
1.3 power off phone
1.4 volume up + volume down and power button
if success sd card upgrade mode begin.
.
Click to expand...
Click to collapse
Thanks, but unfortunately the baidu link is down (as far as I understand it). Would it be possible to upload it elsewhere in order to keep your guide alive?
Related
Hi, I have a Lenovo A690 phone. I need to root it. A friend found me a A690_Rootkit. How do I use it ?
It consists of
SP_Flash_Tool_exe_v3.1224.01 folder
recover folder
driver(A690)
A690-rootBy9Sky.zip
Any help would be appreciated if anyone knows any instructions. Thanks
Good Luck for your A690
Hello Marculos,
I too bought this phone 1 month ago. The advantage is that it is quite cheap on chinese websites, and quite powerful (good rapid chipset, nice screen), , but the main drawback is that is isn't rooted, and only in chinese/english (US), and that it is full of chinese bloatware ... and misses Goggle PlayStore
However I managed to root it, install a nice CUSTOM ROM with root, install Goggle Play Store, move apps to an EXT2 partition on my SDCARD to save memory, remove bloatware (the most difficult was to know which program to remove, as most of them were written in chinese).
To root your phone (if you trust your friend that provided the zip to you), you will have to proceed carefully, as usual.
There are many forums that explain how to do it ; it is always the same operations, so I don't understand why you did not find one.
1 - follow the tutos to install the drivers (allowing your phone to connect to flashtool in the right protocole for flashing)
2 - follow the tutos on flashtool to install the CWM that should be in your 'revover' folder (follow tutos on CWM ; yours should be a 5.0.2.7 based one)
3 - follow the tutos to install your A690-rootBy9Sky.zip Custom Rom
4 - Enjoy
take care that your custom rom might be in chinese when you reboot ; you will have to select english language using the menus written in chinese letters !
Don"t forget that these operations might brick your phone if you perform a bad operation or forget something (even if the phone is a cheap one, that's always ennoying).
I can't help anymore.
Good Luck
I have also got the Lenovo A690 and have been searching the net for a way to route it, I think I need that zip and maybe a link to a how to.
would be great help as its driving me crazy over christmas weekend and its the only phone I have.
It's crazy the phone is like unusable as it has hundreds of apps preinstalled in chinese which I cant remove and there is not enough room to put any more on the phone even with an empty 8gb sd card in it aaaaahhhh
A690 CWM and Custom Rom
Hello dominiclodon,
You can easily find a custom ROM for the A690 by seaching 'needrom a690' on internet. You will have to register to the needrom website, which is currently the only one providing a custom ROM for this phone; and then download all the given files (the drivers, the flashtool, the revcovery (including the CWM-based 5.0.2.7) and the ROM (version 1.4a looks aliek android 2.3.6 and version 1.5a looks like andoid ICS).
Take care that the CWM-based is in chinese (menus are sorted in quite the same order as for an english version). Custom rom is also in chinese when flashed, but after that, you can change the "language" to English US.
The ROM includes root privileges (you will see the Superuser icon), and a RE (in chinese).
I personally removed all bloatware after having installed a browser like Root Browser, and moved most of the user apps on the EXT2 partition of my SD card thanks to Link2DS app. Then installed all useful stuff (AVG antivirus, LBE privacy firewall, a french language package, a Go keyboard (the olnly one installed in the ^hone was the chinese "Sogou" keyboard !).
Everything can be found on the numerous tutos in XDA or in the web.
Good luck
Coulmax said:
Hello dominiclodon,
You can easily find a custom ROM for the A690 by seaching 'needrom a690' on internet. You will have to register to the needrom website, which is currently the only one providing a custom ROM for this phone; and then download all the given files (the drivers, the flashtool, the revcovery (including the CWM-based 5.0.2.7) and the ROM (version 1.4a looks aliek android 2.3.6 and version 1.5a looks like andoid ICS).
Take care that the CWM-based is in chinese (menus are sorted in quite the same order as for an english version). Custom rom is also in chinese when flashed, but after that, you can change the "language" to English US.
The ROM includes root privileges (you will see the Superuser icon), and a RE (in chinese).
I personally removed all bloatware after having installed a browser like Root Browser, and moved most of the user apps on the EXT2 partition of my SD card thanks to Link2DS app. Then installed all useful stuff (AVG antivirus, LBE privacy firewall, a french language package, a Go keyboard (the olnly one installed in the ^hone was the chinese "Sogou" keyboard !).
Everything can be found on the numerous tutos in XDA or in the web.
Good luck
Click to expand...
Click to collapse
Could you tell me how could I install other language onto this phone? Because doesn't work the "morelocale2" and "any locale"...
Thank you so much for the answer!:good:
Coulmax said:
Hello dominiclodon,
You can easily find a custom ROM for the A690 by seaching 'needrom a690' on internet. You will have to register to the needrom website, which is currently the only one providing a custom ROM for this phone; and then download all the given files (the drivers, the flashtool, the revcovery (including the CWM-based 5.0.2.7) and the ROM (version 1.4a looks aliek android 2.3.6 and version 1.5a looks like andoid ICS).
Take care that the CWM-based is in chinese (menus are sorted in quite the same order as for an english version). Custom rom is also in chinese when flashed, but after that, you can change the "language" to English US.
The ROM includes root privileges (you will see the Superuser icon), and a RE (in chinese).
I personally removed all bloatware after having installed a browser like Root Browser, and moved most of the user apps on the EXT2 partition of my SD card thanks to Link2DS app. Then installed all useful stuff (AVG antivirus, LBE privacy firewall, a french language package, a Go keyboard (the olnly one installed in the ^hone was the chinese "Sogou" keyboard !).
Everything can be found on the numerous tutos in XDA or in the web.
Good luck
Click to expand...
Click to collapse
Hi and thanks for the help, I installed the rom and have now installed the 2.0 version, the only problem is that I cant add a google account or anything related to goole like gmail, youtube and playmarket, I can live without it but its very anoeying not having certain apps.
Coulmax said:
Hello Marculos,
I too bought this phone 1 month ago. The advantage is that it is quite cheap on chinese websites, and quite powerful (good rapid chipset, nice screen), , but the main drawback is that is isn't rooted, and only in chinese/english (US), and that it is full of chinese bloatware ... and misses Goggle PlayStore
However I managed to root it, install a nice CUSTOM ROM with root, install Goggle Play Store, move apps to an EXT2 partition on my SDCARD to save memory, remove bloatware (the most difficult was to know which program to remove, as most of them were written in chinese).
To root your phone (if you trust your friend that provided the zip to you), you will have to proceed carefully, as usual.
There are many forums that explain how to do it ; it is always the same operations, so I don't understand why you did not find one.
1 - follow the tutos to install the drivers (allowing your phone to connect to flashtool in the right protocole for flashing)
2 - follow the tutos on flashtool to install the CWM that should be in your 'revover' folder (follow tutos on CWM ; yours should be a 5.0.2.7 based one)
3 - follow the tutos to install your A690-rootBy9Sky.zip Custom Rom
4 - Enjoy
take care that your custom rom might be in chinese when you reboot ; you will have to select english language using the menus written in chinese letters !
Don"t forget that these operations might brick your phone if you perform a bad operation or forget something (even if the phone is a cheap one, that's always ennoying).
I can't help anymore.
Good Luck
Click to expand...
Click to collapse
Thanks for the help. I have to say I find the instructions I have found as clear as mud ! I can see how to install the USB VCOM and MTK USB drivers. The PDF states that the firmware should have 3 folders apdb, modemdb and target_bin. I can't find these.
When you load the scatter loading file theer are a bunch of files that are needed in the target_bin folder which I can't find. Any ideas ?
rooting help
I have found a guide here too
http://test.zhaoxinpeng.com/viewjy.php?id=77b8dc7f27ec456174eab6b5
from what I can see you need to roughly:
Turn off phone
Connect to usb
Install downloaded USB drivers
Load the flash tool
Open MT675_Android_Scatter from recover folder
Untick or tick ? Preloader
Click download
Then boot the phone into recovery mode (power and volume +)
Then unsure !!
rooting
ok .. so I think I sort of understand now. I need to replace the recovery image using the flash tool. Then boot the phone using teh new recovery image and install the required zipped firmware and job done..I think.
I am having issues trying to replace the recovery image. The phone gets detected by the flash tool but depending on the recovery.img used I get errors.
1/ BROM ERROR : S_FT_NEED_DOWNLOAD_ALL_FAIL (4050) .. or
2/ BROM ERROR : S_FT_DOWNLOAD_FAIL (4008)
I am using Win 7 x64. Any ideas anyone ?
driver issue
it looks like an issue with the driver - Mediatek Proloader USB com port This device cannot start. (Code 10) any ideas ? I have tried installing lots of different device drivers.
marculos said:
ok .. so I think I sort of understand now. I need to replace the recovery image using the flash tool. Then boot the phone using teh new recovery image and install the required zipped firmware and job done..I think.
I am having issues trying to replace the recovery image. The phone gets detected by the flash tool but depending on the recovery.img used I get errors.
1/ BROM ERROR : S_FT_NEED_DOWNLOAD_ALL_FAIL (4050) .. or
2/ BROM ERROR : S_FT_DOWNLOAD_FAIL (4008)
I am using Win 7 x64. Any ideas anyone ?
Click to expand...
Click to collapse
I've got the same issue with you.
progress
ok do I have the driver installed on another pc. Next issue .. When I connect the phone by taking out and replacing the battery the device only shows up in device manager for a few seconds then disconnects. Any ideas how to keep it connected for longer than a few seconds ?
I'm already install custom rom for lenovo a690, but i can't install google play, gmail, and sync my email... after i sync my phone always restart.. how to fix this problem? and how to add google play?
Coulmax said:
Hello Marculos,
I too bought this phone 1 month ago. The advantage is that it is quite cheap on chinese websites, and quite powerful (good rapid chipset, nice screen), , but the main drawback is that is isn't rooted, and only in chinese/english (US), and that it is full of chinese bloatware ... and misses Goggle PlayStore
However I managed to root it, install a nice CUSTOM ROM with root, install Goggle Play Store, move apps to an EXT2 partition on my SDCARD to save memory, remove bloatware (the most difficult was to know which program to remove, as most of them were written in chinese).
To root your phone (if you trust your friend that provided the zip to you), you will have to proceed carefully, as usual.
There are many forums that explain how to do it ; it is always the same operations, so I don't understand why you did not find one.
1 - follow the tutos to install the drivers (allowing your phone to connect to flashtool in the right protocole for flashing)
2 - follow the tutos on flashtool to install the CWM that should be in your 'revover' folder (follow tutos on CWM ; yours should be a 5.0.2.7 based one)
3 - follow the tutos to install your A690-rootBy9Sky.zip Custom Rom
4 - Enjoy
take care that your custom rom might be in chinese when you reboot ; you will have to select english language using the menus written in chinese letters !
Don"t forget that these operations might brick your phone if you perform a bad operation or forget something (even if the phone is a cheap one, that's always ennoying).
I can't help anymore.
Good Luck
Click to expand...
Click to collapse
Ya i agree with you..if you are sure that the rooting procedure is meant for your device then go ahead
how to root
Here is how I rooted my Lenovo A690. THIS WILL WIPE EVERYTHING INCLUDING IN MY CASE THE IMEI. WARNING !!!
What you need:
MTKdroidTools_v229.exe - only needed if you wipe your IMEI
Full A690 Firmware - got mine off Pandawill forum.
Try this :
http://74.86.85.61/showthread.php?15487-ROM-Lenovo-A690_S012_121018-for-sku35508
or google below - this is the one I used
A690_SO13_12105.
Below all available from needrom. You will need to register
http://www.needrom.com/phone-roms/lenovo/a690/
USBVCom driver
SP Flash Tool - I used v3.1220.01
Recovery.img (in recovery zip)
A690 ROM in zip file. I used a690_s013_121207_v2.0_9sky
On a x86 Win 7 pc .. extract all downloaded stuff
1/ Connect phone to pc with usb cable. Do not switch on. When prompted for a driver install the USB V Com driver. Should show up in Ports.
(usb2ser_Win7.inf)
2/ You need to maybe change the checksum.ini in the folder with the full ROM in. Change CHECKSUM_SWITCH=1 to 0.
3/ Open SP Flash Tool.
4/ Open MT675_Android_scatter.txt from the full ROM folder, NOT the recover image.
PRELOADER
DSP_BL
UBOOT
BOOTIMG
RECOVERY
SEC_RO
LOGO
ANDROID
USRDATA
5/ This should load a bunch of files as above needed to flash the phone to the stock ROM.
6/ You will need to change the recovery.img to the one downloaded from needrom website. This will load the modified CWM recovery image needed to load the custom firmware. You may need to change the checksum value as above...
7/ Click "Download"
8/ Connect your phone. (Take out battery then reconnect)
9/ If all good you should see a nice green circle and the CWM recovery image should have been loaded together with stock ROM.
10/ Next, copy the custom rom you want to use to the root of the SD card on the phone and rename to update.zip
11/ Reboot the phone, press vol + plus power. You should now see CWM-based recovery
12/ Choose the second option ??/sdcard/update.zip.
13/ Press the bottom left button and the ROM should update.
14/ That should be it ! Mine booted in chinese only and took me a while to find the option to change to english.
15/ If you get invalid IMEI error then you need to recreate the IMEI values. I used the MTKdroidTools_v229.exe tool to reenter both IMEI (same for both). The IMEI is printed on the back of the phone. You can also set the IMEI from a terminal app on the phone.
I've go this error when rooting
BROM ERROR : S_FT_NEED_DOWNLOAD_ALL_FAIL (4050)
Need download all images!
Could you please tell me what's i'm missing?
I rooted from stock rom. Can the stock rom be rooted?
halvald said:
I'm already install custom rom for lenovo a690, but i can't install google play, gmail, and sync my email... after i sync my phone always restart.. how to fix this problem? and how to add google play?
Click to expand...
Click to collapse
I am having the same problem aswell, I have done everything else but it wont let me add a google account and play store wont work with out one.
Hoping someone helps us out here
ntdvn said:
I've go this error when rooting
BROM ERROR : S_FT_NEED_DOWNLOAD_ALL_FAIL (4050)
Need download all images!
Could you please tell me what's i'm missing?
I rooted from stock rom. Can the stock rom be rooted?
Click to expand...
Click to collapse
I'm not sure if the stock rom can be rooted. I tried with all the tools out there superoneclick etc and couldnt get it to root with these tools.
I had no success just trying to replace the recovery.img so I replaced the entire rom (if rom is right terminoogy)
Did you use the rom downloaded from Pandawill link ? These files below are needed for full flash (replacing the standard recovery.img with the CWM recovery.img).
PRELOADER
DSP_BL
UBOOT
BOOTIMG
RECOVERY
SEC_RO
LOGO
ANDROID
USRDATA
Now its rooted Ive added a 16gb sd card and used link2sd with a 2nd partition for apps and I can install a ton more apps than before. I can't get a google account natively working either but doesnt bother me that much as just use 1Mobile Market for apps, and 3rd party email app.
marculos said:
I'm not sure if the stock rom can be rooted. I tried with all the tools out there superoneclick etc and couldnt get it to root with these tools.
I had no success just trying to replace the recovery.img so I replaced the entire rom (if rom is right terminoogy)
Did you use the rom downloaded from Pandawill link ? These files below are needed for full flash (replacing the standard recovery.img with the CWM recovery.img).
PRELOADER
DSP_BL
UBOOT
BOOTIMG
RECOVERY
SEC_RO
LOGO
ANDROID
USRDATA
Now its rooted Ive added a 16gb sd card and used link2sd with a 2nd partition for apps and I can install a ton more apps than before. I can't get a google account natively working either but doesnt bother me that much as just use 1Mobile Market for apps, and 3rd party email app.
Click to expand...
Click to collapse
Yes, I did use Pandawill's link to get recovery file then use flash tool to replace stock recovery.img. Then I got that error. I doubt that we can't root stock room by this way.
root
ntdvn said:
Yes, I did use Pandawill's link to get recovery file then use flash tool to replace stock recovery.img. Then I got that error. I doubt that we can't root stock room by this way.
Click to expand...
Click to collapse
I had no joy just replacing the stock recovery.img. You need to replace the entire ROM from pandawill link (with new CWM recovery.img).
I replaced the entire ROM together with a new CWM recovery.img then loaded a custom ROM as an update.zip. This was the only way I could root the device. I'm not sure if its possible to root the stock ROM.
Hello
I need some help please.....?
I have a Moto G5 where i want to reinstall the OS (rom etc) on the phone.
So when i switch it on its like having a new phone etc...... I know that you can reset the software from the bootloader menu etc but i wish to reinstall fresh OS.
Can anyone advice me where to download the OS..... and perhaps a guide on how to do this ?
Thank you for your help.
amebb said:
Hello
I need some help please.....?
I have a Moto G5 where i want to reinstall the OS (rom etc) on the phone.
So when i switch it on its like having a new phone etc...... I know that you can reset the software from the bootloader menu etc but i wish to reinstall fresh OS.
Can anyone advice me where to download the OS..... and perhaps a guide on how to do this ?
Thank you for your help.
Click to expand...
Click to collapse
easy tutorial had to do it myself
The issue here is that its asking for the Google authentication.
Because i have purchased this phone of ebay i do not know the previous owners details so I cannot enter the google required information.
Ideally i need to by pass the security.
I know there are methods shown on youtube but for some reason i am missing some options when it comes to copy and paste... i dont have the share option ...
Any help would be appreciated
amebb said:
The issue here is that its asking for the Google authentication.
Because i have purchased this phone of ebay i do not know the previous owners details so I cannot enter the google required information.
Ideally i need to by pass the security.
I know there are methods shown on youtube but for some reason i am missing some options when it comes to copy and paste... i dont have the share option ...
Any help would be appreciated
Click to expand...
Click to collapse
That should allow a fresh install if you do a wipe in twrp or format data should be clean stock ROM ????
amebb said:
The issue here is that its asking for the Google authentication.
Because i have purchased this phone of ebay i do not know the previous owners details so I cannot enter the google required information.
Ideally i need to by pass the security.
I know there are methods shown on youtube but for some reason i am missing some options when it comes to copy and paste... i dont have the share option ...
Any help would be appreciated
Click to expand...
Click to collapse
That doesn't ask u any security issue just switch off the phone
Go to fastboot mode by pressing volume down and power at the same time and download the files from the link provided below that video and copy the code directly from there.
And download fastboot drivers(Minimal ADB and Fastboot)
just open CMD where ADB is installed .
Extract the folder u have downloaded like (Npp...)
Copy and paste it in minimal ADB and fastboot folder
Then launch CMD there itself and connect the mobile to PC and and paste the code it automatically does the rest and finally press enter on the final command to reboot
Then it gives a fresh start ... Go and enjoy
Hi, XDA members. If you have problem with FRP, or bootloop, just flash one of this firmwares, and get success!
Instructions:
1. Format your 4GB (or more) SD Card as Fat32.
2. Extract archive.
3. Put bin file into SD card.
4. Turn off Hisense F10, put SD card in.
5. Press Vol+ + Vol- + Power
6. You'll see Upgrade mode.
7. When upgrade completed, long press Power button and Enjoy!
Note1 . Battery must be minimum 50%.
Note 2. After upgrade it will take 4-5 minutes to load OS ,just be patient.
DOWNLOAD:
mega. nz/#!FYl2jJQK!5WaHVhh7gJ2VQCV3oDosF8nM8a76yoi3HXFGNWtGf_M
mega. nz/#!wzhHnTID!wDT2yJyukiEbEFmKRoKL9KRdAFkpaNd0EdQaYvyXZhA
Note 3: Because of I'm new user XDA blocked to post links. To dowload firmwares just remove SPACES from links
If you want to see your firmware version:
1. Vision settings
2. Turn on Talkback
3. Swipe your finger DOWN and RIGHT (L)
4. Talkback settings
5. Search Voice settings with Assistant
6. Open Youtube
7. When opening browser, select Chrome
8. Download Holo Launcher (or anyone)
9. Install and Open
10. Go to Settings and see your firmware version
Note that you cannot bypass frp with this way, because all modificiations blocked by FRP protection. Only way is to flash correct firmware.
Rauf_Baku said:
If you want to see your firmware version:
1. Vision settings
2. Turn on Talkback
3. Swipe your finger DOWN and RIGHT (L)
4. Talkback settings
5. Search Voice settings with Assistant
6. Open Youtube
7. When opening browser, select Chrome
8. Download Holo Launcher (or anyone)
9. Install and Open
10. Go to Settings and see your firmware version
Note that you cannot bypass frp with this way, because all modificiations blocked by FRP protection. Only way is to flash correct firmware.
Click to expand...
Click to collapse
great entry bro, welcome to greatest xda forums,where everyone help other and get help, i hope your journey will go good, how did you get these files?
hisense f10 fpr
goodday, concerning f10 firmware, how did you manage to get a andriod phone read a bin file from a sd card, tried it, but phone cant open file
markbeljoi said:
goodday, concerning f10 firmware, how did you manage to get a andriod phone read a bin file from a sd card, tried it, but phone cant open file
Click to expand...
Click to collapse
+1 same problem
markbeljoi said:
goodday, concerning f10 firmware, how did you manage to get a andriod phone read a bin file from a sd card, tried it, but phone cant open file
Click to expand...
Click to collapse
Remove battery, wait 30 sec,put it back and IMMEDIATELY press Vol+ Vol- Power. If not work, try Vol+ Power.
favzan choksi said:
great entry bro, welcome to greatest xda forums,where everyone help other and get help, i hope your journey will go good, how did you get these files?
Click to expand...
Click to collapse
Thanks. I have downloaded this file from gem-flash (it was not free
Rauf_Baku said:
Thanks. I have downloaded this file from gem-flash (it was not free
Click to expand...
Click to collapse
you are really great bro, boom boom entry bro, for those who are unable to flash hisense f10 with above firmware, hisense f10 has 3 model, we have 2 firmware, so its clear that your phone is 3rd type, anyone please post that 3rd firmware if you have
bricked phone
Hello, my phone bricked
I formatted sd card in FAT
uploaded bin file in sd card
But In upgrade mode its always says "No update file in TF card"
Hisense F10 WhatsApp error
Hey guys inhave this phone but every time i restart the device it also restarts WhatsApp. It goes back to the first initial screen and says that the version was last updated on July 2017. Anyone with a solution will be highly appreciated.
Flash Hisense F10
Howzit guys, my Hisense does not see the .bin file from SD card in boot menu. Did everything shown in the post?
Hi !I want to know how to extract hisense ROM bin files. Please help me, thanks.
How to root hisense f10
Can someone help me with hisensef10 rooting problem
I have tried going through many reference links for my below issue , but all of them are atleast the pre-Marshmallow age so couldn't find a proper solution
I have a Redmi 2 Prime mobile ( 2014 model ) and I have flashed it with Lineage OS 17.1 version ( Android 10 ) ( exact version is lineage-17.1-20200711-nightly-wt88047-signed.zip ) along with OpenGApps pico version ( open_gapps-arm-10.0-pico-20200725.zip ). The device came up fine, most other things which I have checked also is working fine, except for Indic language support. I am specifically looking for Malayalam ( South Indian language ). When I try to add it in languages section, it shows the name of language itself as garbage. I tried adding GBoard and Google Indic keyboard, but when I select Malayalam->English, it says 'Your device does not support this language' above the space bar of keyboard . When I add Malayalam language( by typing in English and selecting the only option that comes ), Google Play services is shown to check for some language support online but quickly stops and nothing happens. I checked accessing a web page in this language in Google Chrome and it rendered nicely. But on checking some other pages, it is the same junk( both in page and the Google search results for it )
Could someone help me with what I should try to get this fixed?
LineageRNz said:
I have tried going through many reference links for my below issue , but all of them are atleast the pre-Marshmallow age so couldn't find a proper solution
I have a Redmi 2 Prime mobile ( 2014 model ) and I have flashed it with Lineage OS 17.1 version ( Android 10 ) ( exact version is lineage-17.1-20200711-nightly-wt88047-signed.zip ) along with OpenGApps pico version ( open_gapps-arm-10.0-pico-20200725.zip ). The device came up fine, most other things which I have checked also is working fine, except for Indic language support. I am specifically looking for Malayalam ( South Indian language ). When I try to add it in languages section, it shows the name of language itself as garbage. I tried adding GBoard and Google Indic keyboard, but when I select Malayalam->English, it says 'Your device does not support this language' above the space bar of keyboard . When I add Malayalam language( by typing in English and selecting the only option that comes ), Google Play services is shown to check for some language support online but quickly stops and nothing happens. I checked accessing a web page in this language in Google Chrome and it rendered nicely. But on checking some other pages, it is the same junk( both in page and the Google search results for it )
Could someone help me with what I should try to get this fixed?
Click to expand...
Click to collapse
If it's about lineageOS user interface, you can help to translate
https://crowdin.com/project/lineageos/ml-IN#
For keyboard you can try anysoft
https://www.f-droid.org/en/packages/com.anysoftkeyboard.languagepack.malayalam/
kurtn said:
If it's about lineageOS user interface, you can help to translate
For keyboard you can try anysoft
Click to expand...
Click to collapse
Thanks for the reply.
I am not sure if Lineage OS itself is lacking this support or if I just need to install a font or language support. I tried downloading Google Indic keyboard(which usually downloads a language pack and then proceeds fine in my previous mobiles(Moto G2 and Redmi with MIUI ) but here it doenst seem to do the trick.
I will try to install font and see if it helps. Thanks for the tip
LineageRNz said:
Thanks for the reply.
I am not sure if Lineage OS itself is lacking this support or if I just need to install a font or language support. I tried downloading Google Indic keyboard(which usually downloads a language pack and then proceeds fine in my previous mobiles(Moto G2 and Redmi with MIUI ) but here it doenst seem to do the trick.
I will try to install font and see if it helps. Thanks for the tip
Click to expand...
Click to collapse
Just tried without GApps. Seems to work
kurtn said:
Just tried without GApps. Seems to work
Click to expand...
Click to collapse
Thanks for the reply.
I tried installing a font using TWRP( font in zip format and copying to /system/fonts/ ). On reboot, I still saw it is not supported. So I did some debug. From TWRP, I again flashed the font, using the file manager in TWRP I browsed the location and made sure it is copied. I pressed the reboot in TWRP window itself, rebooted and once in , again rebooted to TWRP, browsed to the location using File manager and saw the files are not there. It seems whatever fonts I install from TWRP are not persisting after reboot. I am missing something when I flash the fonts?
if it helps to get a clue on my issue - The same happens for Magisk. I install the zip via TWRP, I confirm it is doing the job via logs shown in TWRP, but when I boot to OS, install Magisk Manager, it says Magisk is not installed ( I saw some bugs raised in github, which were closed without proper explanation )
LineageRNz said:
Thanks for the reply.
I tried installing a font using TWRP( font in zip format and copying to /system/fonts/ ). On reboot, I still saw it is not supported. So I did some debug. From TWRP, I again flashed the font, using the file manager in TWRP I browsed the location and made sure it is copied. I pressed the reboot in TWRP window itself, rebooted and once in , again rebooted to TWRP, browsed to the location using File manager and saw the files are not there. It seems whatever fonts I install from TWRP are not persisting after reboot. I am missing something when I flash the fonts?
if it helps to get a clue on my issue - The same happens for Magisk. I install the zip via TWRP, I confirm it is doing the job via logs shown in TWRP, but when I boot to OS, install Magisk Manager, it says Magisk is not installed ( I saw some bugs raised in github, which were closed without proper explanation )
Click to expand...
Click to collapse
Yes. Magisk issues are not accepted by lineageOS team. Maybe your issue is magisk related aswell. In your case i would start from scratch with wiping system and data and installing lineageOS only.
kurtn said:
Just tried without GApps. Seems to work
Click to expand...
Click to collapse
Ah , I tried this ( TWRP->LineageOS 17.1->Fonts zip->Reboot ). Still didn't helped. I am debugging further
kurtn said:
Just tried without GApps. Seems to work
Click to expand...
Click to collapse
At last I was able to resolve this issue( as mentioned in my comment in https://forum.xda-developers.com/showpost.php?p=83561275&postcount=435 ). The issue seems to be with the font i tried earlier. Now I got a full set of font package and was able to install it and use
Everything you do, you do at your own risk. I'm not responsible for all damages, this can also lead to loss of warranty.
Hi,
Probably many of you know how to do a Magisk install without TWRP, but this guide is for people who don't know and don't want to mess things up.
I will try to show you step by step how to do it.
Many thanks to:
kdrag0n
topjohnwu
Leave them a nice feedback
!!! Before we start make sure your device is unlocked, if you don't know how to do it below is link to official Xiaomi guide !!!
https://c.mi.com/thread-2262302-1-0.html
Requirement
Xiaomi Mi Flash ver. =>3-14-0 - Needed to install all adb drivers Download
ADB & Fastboot tools - Could be the one built into Mi Flash tool I'll use this to make it simple
Magisk =>24.2 - This software is base of our rooting process Download
SafetyNet Fix => 2.2.1 (Zygisk) - Needed to backdoor SafetyNet fail check, at the moment it is only working method for Mi Pad 5 Download Make sure you download the Zygisk version!
Boot.img - You can download from official MIUI website full flashable rom and separate boot.img file from there, or use my if your Miui version is China 13.0.5, EEA 13.0.3, Global 13.0.1
China 13.0.5EEA 13.0.3Global 13.0.1Installation
To make it easier, Green color mean what you need to do on Tablet, Orange on PC
Unzip Mi Flash tool
Open folder and run XiaoMiFlash.exe, if window "Driver" won't pop-up click on the Driver tab and then "Install" button and close all windows.
Connect your tablet to computer, when your tablet ask how you want use USB, choose File Transfer/Android Auto
Copy to internal storage Magisk-v****.apk, safetynet-fix-v****.zip and boot.img
Open File Manager on your tablet find a folder where you copied all files, and install Magisk
Open Magisk app, and click on Install in section Magisk, then select "Select and Path a File", after that find your boot.img file and click on it
Click "LET'S GO" button on the right side and wait until process will be finished
On your computer in the tablet's storage window, go to the file specified in the application probably /Download/magisk_patched-*****
Copy this file to a subfolder of Mi Flash on your computer, exactly to MiFlash2020-3-14-0\Source\ThirdParty\Google\Android and change the name of this file to boot.img
Open PowerShell/Windows Terminal in this folder (Hold Shift + Right click -> Open PowerShell window here)
Make sure your tablet have enabled USB debugging in Developer options Setting -> Additional settings -> Developer options -> USB debugging
Turn off your tablet, then hold down Power and VOL- until the screen lights up, then release power button, if Fastboot appears, everything went fine
Go back to your Terminal window and type to check if your computer see your tablet
Code:
./fastboot.exe devices
If you see answer "******** fastboot" it mean there is communication between PC and Tablet
Next type this command to flash patched boot image
Code:
./fastboot.exe flash boot boot.img
Next type this command to reboot your device
Code:
./fastboot.exe reboot
Restart can take a longer time than normal
Open Magisk app and check status of Magisk, if you see for exaple "Installed 24.2 (24200)" everything went fine
Open Settings in right corner of app and in section App click on Hide the Magisk app then type name for hidden app, it will ask to install new app so do it
Open again Magisk app and open Settings in section Magisk enable Zygisk (Beta) and Enforce DenyList
Click on Configure DenyList than click on three dots in right corner and uncheck Show system apps
Search for all the apps in the list below and check them. It is important to click on their name to see all modules, once you have done this click on the box to activate all of them
Code:
Google
Google Assistant (I have two)
Google Pay
Google Play services
Google Play Store
After that reboot your tablet, and open again Magisk app
On the bottom click on Modules
Click on Install from storage button and find file safetynet-fix-v*******.zip, than click on it
After that reboot your device one more time
After reboot open Android Settings go to Apps and Unhide system services than find and clear all data of Google Play services and Google Play Store
Reboot tablet last time
If you have reached this point it means that everything has gone correctly, probably for about 3 hours you will still not be able to install Netflix and some banking applications but after this time everything will be back to normal, this is because Google's servers have detected that Magisk has been installed but that the application has been changed and Zygisk has been enabled so at the next check it notices that everything is Ok and gives access back.
Quick explaination what happend here:
Magisk has been installed and device is Rooted
The application has been changed and hidden
Zygisk has been activated and hidden from Google services
SafetyNet-fix was installed, which restores the functionality of SafetyNet and Widevine L1, which is blocked after the installation of Magisk and unlocked Bootloader
Hello,
(I use google translate).
Thanks for your method. Before using it, I would like to ask you a few questions.
I have already rooted a few devices (mipad 1, mi phone, htc...) with my macbook and twrp.
The adb files are already installed on my mac.
1) once the pad 5 is rooted, should I, like on my phone, patch the new boot.img file with each update?
2) Could I install the twrp application afterwards to be able to do a complete backup of the system and possibly install a version of lineageos later?
3) Is there a version of miflash unlock tool for mac os x?
4) Should I register or register on the xioami site before unlocking the boot?
Thank you in advance for your method and your answers.
Nux01
Nux01 said:
Hello,
(I use google translate).
Thanks for your method. Before using it, I would like to ask you a few questions.
I have already rooted a few devices (mipad 1, mi phone, htc...) with my macbook and twrp.
The adb files are already installed on my mac.
1) once the pad 5 is rooted, should I, like on my phone, patch the new boot.img file with each update?
2) Could I install the twrp application afterwards to be able to do a complete backup of the system and possibly install a version of lineageos later?
3) Is there a version of miflash unlock tool for mac os x?
4) Should I register or register on the xioami site before unlocking the boot?
Thank you in advance for your method and your answers.
Nux01
Click to expand...
Click to collapse
Hi Nux01,
1. Unfortunately yes, TWRP isn't supported for Pad 5 yet.
2. It won't work, TWRP app is only making a request to TWRP custom recovery, until it doesn't exist you can't even install custom ROM
3. It is, but i didn't test it yet on Pad 5, and I don't know if it will work with new decides because last release is from 20.07.2020.
https://github.com/francescotescari/XiaoMiToolV2/releases
4. Yes, you need Xiaomi account, also your device has to be logged in, and registered to unlock, Xiaomi made complete guide how to do this, link is on the top of this post.
Hello,
Thank you for your quick reply.
The latest version of Mitool does not work. On the other hand, with regard to version 20.7.21, it's OK.
What does it mean: "I do not know if it will work with new decides".
And to unlock the bootloader, I have to use the Xiaomitool V2 application?
Thanks again.
NUX01
Nux01 said:
Hello,
Thank you for your quick reply.
The latest version of Mitool does not work. On the other hand, with regard to version 20.7.21, it's OK.
What does it mean: "I do not know if it will work with new decides".
And to unlock the bootloader, I have to use the Xiaomitool V2 application?
Thanks again.
NUX01
Click to expand...
Click to collapse
I mean it's quite old release so it may not work with current unlock bootloader process on new devices like a Xiaomi 12, Xiaomi Pad 5 etc. I can't promise it won't brick your device, only confirmed method is by official Xiaomi tool.
Thank you
I'll wait a little bit before rooting my tablet.
Have a nice day.
Followed the instruction, worked like a charm. Although I had unknown "chinese sings" errors with the driver install it worked. By the way there is a newer version of the flashing tool.
Thanks for the effort of writing this down!
Hello,
I just managed to unlock the bootloader of my tablet "Pad 5".
I tried under Mac and Linux with Xiaomitool V2 without success (error 20036 and 20045).
I also tried with VirtualBox who did not recognize the tablet.
I succeeded with VMware and Windows 7 by testing different drivers and it worked.
I just root the tablet with Magisk.
On the other hand, is there the equivalent of TWRP to make a complete system backup. Apart from Titanium and MyBackup.
Thanks for your help.
thanks dude.
didn't try this yet, just wondering.
can't i just flash recovery and then flash magisk.apk?
thanks
Can i update ota to 13.0.2 after rooted? Just update and root again?
Cpanel10x said:
Can i update ota to 13.0.2 after rooted? Just update and root again?
Click to expand...
Click to collapse
You can update, but after that you need root again but with boot.img from 13.0.2
How to get the boot.img 13.0.2? I checked the 3GB Firmware and only found vendor_boot.img. Is it the same thing?
Never mind. I got the boot.img from here: https://miuirom.org/tablets/xiaomi-pad-5
Thomas Brown 99 said:
Never mind. I got the boot.img from here: https://miuirom.org/tablets/xiaomi-pad-5
Click to expand...
Click to collapse
boot.img for miui global 13.0.3(RKXINXM) isn't available there. Plz help...
Thanks for this awesome guide. Do you have some suggest about the magisk modules to install?
thanks, it just worked perfectly and your step by step guide is very handy and helpful. thanks so so much.
vjsaini00 said:
boot.img for miui global 13.0.3(RKXINXM) isn't available there. Plz help...
Click to expand...
Click to collapse
Today evening, I'll add more boot.img
kisielec said:
Today evening, I'll add more boot.img
Click to expand...
Click to collapse
eagerly waiting, Thanks
Hey there.
I have done everything above and i MIGHT have some problem. The problem with my problem is that its not really reproducable easily even for me.... Weird, I know!
Lets go into details:
Issue description: When I reboot my tablet it goes into "MIUI Recovery" window, on which I am offered to reboot the device or clean.... And when I reboot it goes back to the recovery screen again. Like a loop-hole.
....
But then if I leave it untouched for several minutes it reboots itself and launches the system properly finally...
When did it start: It first started after I performed this step:
24. Click on Install from storage button and find file safetynet-fix-v*******.zip, than click on it
25. After that reboot your device one more time
Click to expand...
Click to collapse
When I finally landed in the system I of course continued and performed further steps. After another reboot in step 27 the same thing happened but much, much longer.
I thought it somehow self fixed and works - once I am in the system. Right? So I did a reboot to test it. And no... recovery screen again for another 20 or so minutes until finally MIUI loaded fully.
Now I am afraid to turn off / reboot my tablet... I am afraid it might never finish booting next time.
Any ideas whats wrong and how to fix this weird and irregular behaviour?
My details:
Device: Xiaomi Pad 5 6/256gb
Original system was Chinese. I have reinstalled to Global one a version ago.
MIUI version currently running: 13.0.3(RKXMIXM)
Android version: 11 RKQ1.200826.002
Magisk version: 25.1 (25100) (32)
Magisk Modules: Universal SafetyNet Fix v2.2.1 (yes I made sure to download around Zygisk section)
Anything else I shall provide?
cysmaster said:
Hey there.
I have done everything above and i MIGHT have some problem. The problem with my problem is that its not really reproducable easily even for me.... Weird, I know!
Lets go into details:
Issue description: When I reboot my tablet it goes into "MIUI Recovery" window, on which I am offered to reboot the device or clean.... And when I reboot it goes back to the recovery screen again. Like a loop-hole.
....
But then if I leave it untouched for several minutes it reboots itself and launches the system properly finally...
When did it start: It first started after I performed this step:
When I finally landed in the system I of course continued and performed further steps. After another reboot in step 27 the same thing happened but much, much longer.
I thought it somehow self fixed and works - once I am in the system. Right? So I did a reboot to test it. And no... recovery screen again for another 20 or so minutes until finally MIUI loaded fully.
Now I am afraid to turn off / reboot my tablet... I am afraid it might never finish booting next time.
Any ideas whats wrong and how to fix this weird and irregular behaviour?
My details:
Device: Xiaomi Pad 5 6/256gb
Original system was Chinese. I have reinstalled to Global one a version ago.
MIUI version currently running: 13.0.3(RKXMIXM)
Android version: 11 RKQ1.200826.002
Magisk version: 25.1 (25100) (32)
Magisk Modules: Universal SafetyNet Fix v2.2.1 (yes I made sure to download around Zygisk section)
Anything else I shall provide?
Click to expand...
Click to collapse
I also have this module installed without problems, as there is no recovey for Pad5, it is a good idea to install in magisk the module Magisk Bootloop Protector, which serves exactly to prevent what you are afraid that happen with your tablet