Develop Bugs

[Q] Cyanogenmod 7.2 and GApps

Hi everyone,
I have some troubles to install the gapps with the Cyanogenmod 7.2 ; I made lots of tries and have several behaviors:
1.
- Wipe Everything (Wipe Cache, Wipe Dalvik Cache, System, Ext, etc.)
- Flash CM7
- Flash gapps (gapps-gb-20110828-signed)
- Reboot
--> Infinite Boot Loop
2.
- Wipe Everything
- Flash CM7
- Reboot
- Setup my preferences, etc.
- Restarting
- Flash gapps (gapps-gb-20110828-signed)
- Reboot
--> Touch the Droid to start --> Touching it --> nothing
I have tried lotfs of things like clearing the cache after the flash or when it does not do anything when I click on the android, I waited several minutes but nothing seems to work: i'm unable to have the CM7.2 working with the gapps.
Any idea to help me?
Thank's a lot guys!

htc amaze stuck on boot after upgrade to 10.1 issue

Hi,
I am trying to upgrade my htc eamaze (ruby) to Cyanogenmod 10, but after installation in recovery mod, it stuck on boot white screen. I read on somethread that flash boot into android phone but that shows the boot animation and then gets restarted. What can be the issue? Please help. I am following the steps as:
Boot into Clockwordmod Recovery
Factory Reset/wipe data
Wipe cache partition
wipe Dalvik cache
install from sd card CM 10
install from sdcard gapps
Reboot system now
For flashing boot.img
fastboot flash boot boot.img
I have downloaded cm-10.1-20130518-UNOFFICIAL-ruby and gapps-jb-20130812-signed
Please help !!!!.
Thanks

Stuck in Twrp reboot loop

I recently installed twrp and for my moto g5 then I did format data later on went for reboot system then I found no os installed so I installed a custom Rom later rebooted the system then I got stuck in twrp loop. I went through all the solution but it did not work so please help. Thank you

If you're on stock rom you need to remove dm-verity for it to boot (read faqs on twrp thread!)
For custom rom flash it correctly
Wipe
Advanced wipe
Wipe system data cache
Install
Select rom zip
Select gapps zip
Select root zip (optional)
Wipe cache
Restart

What architecture rom and twrp are you using?

[HELP][SAGIT] how to back from custom to miui.eu

Hi you guys
Can anyone tell me how back from custom rom to miui.eu, how to do that?
I had Resurrection Remix Oreo RR-O-v6.1.0-20180817-sagit-Official.zip and I wanted update to RR-O-v6.2.1-20181017-sagit-Final.zip.
After update I have all issues: can not unlock phone after power on, reboot to system almost everytime.
Newest TWRP twrp-3.2.3-4-arian-sagit make a big mess with my time zone and all next attempts to install any version of twrp take over the same time zone error
I came to the conclusion that I think I will return to miui.eu
And forget how to do that
1. Try:
- Boot into this TWRP
- Wipe system, cache and dalvik cache, art, data
- install xiaomi.eu_multi_MI6_8.10.25_v10-8.0
- reboot to system
Code:
No OS Installed! Are you sure you wish to reboot?
2. Try:
- Boot into this TWRP
- Wipe system, cache and dalvik cache, art, data
- format data - write yes tap ok
- Boot into this TWRP again, copy rom from pc
- install xiaomi.eu_multi_MI6_8.10.25_v10-8.0
- reboot to system
Code:
No OS Installed! Are you sure you wish to reboot?
as a result, I have a clean phone with no OS and recovery twrp-3.2.3-4-arian-sagit

I format data and then wipe all, try that.
that no os msg ur getting, if u can get miui to boot then it doesnt matter. give it a few min after you reboot even if it says there's no OS, mby its worth the try.

_euphonic_ said:
Hi you guys
Can anyone tell me how back from custom rom to miui.eu, how to do that?
I had Resurrection Remix Oreo RR-O-v6.1.0-20180817-sagit-Official.zip and I wanted update to RR-O-v6.2.1-20181017-sagit-Final.zip.
After update I have all issues: can not unlock phone after power on, reboot to system almost everytime.
Newest TWRP twrp-3.2.3-4-arian-sagit make a big mess with my time zone and all next attempts to install any version of twrp take over the same time zone error
I came to the conclusion that I think I will return to miui.eu
And forget how to do that
1. Try:
- Boot into this TWRP
- Wipe system, cache and dalvik cache, art, data
- install xiaomi.eu_multi_MI6_8.10.25_v10-8.0
- reboot to system
2. Try:
- Boot into this TWRP
- Wipe system, cache and dalvik cache, art, data
- format data - write yes tap ok
- Boot into this TWRP again, copy rom from pc
- install xiaomi.eu_multi_MI6_8.10.25_v10-8.0
- reboot to system
as a result, I have a clean phone with no OS and recovery twrp-3.2.3-4-arian-sagit
Click to expand...
Click to collapse
Foa this is the wrong place, use the Question / Help section.
Sad to hear you can't use the final RR build, which works just fine. Also my twrp build inst nuking the time, it isn't working on all new builds.
To go to miui you just need to do the steps from your try 2.

Pixel Experience 11 Bootloop

Hi,
i was using LineageOS 17.1(Android 10) on my pixel Xl (32 gb storage)
when android 11 came out, I thought I would switch to pixel experience. So I went to their official website and downloaded the android 11 version of pixel XL
There was an instruction guide provided by the developers on how to install android 11
So I followed that and even after applying update from the adb, there was no issue at all
but when I pressed "Reboot to system" Bootloop is happening
Note: I didn't noticed the official instruction first so i installed twrp to flash the rom just like I flashed LineageOS, but in the advance wipe section, there was only 4 option available
-Dalvik / ART cache
-System
-Data
-Internal Storage
there was no cache option
I formatted the data and wiped all of them and tried to both install and sideload the rom but every time during the installation, an error (code 28) occurs
Then I downloaded the rom again hoping that the previos 1 was corrupted and i saw the instruction guide this time.
So I followed the guide and installed their recovery image, flashed recovery partition and flashed the rom using sideload.
But after rebooting the system, Bootloop keeps occurring
*sorry for any misspell or grammatical mistake*
ROM and Recovery image Downloaded from - https://download.pixelexperience.org/marlin (Android 11, 2021/04/16)
ROM and Recovery image installation guide - https://wiki.pixelexperience.org/devices/marlin/install/

I'm having the same issue. Did you flash the repartition zip?
I ended up reflashing stock rom https://developers.google.com/android/images#marlin
Try doing that and restarting the process

GalaxyWhy said:
I'm having the same issue. Did you flash the repartition zip?
I ended up reflashing stock rom https://developers.google.com/android/images#marlin
Try doing that and restarting the process
Click to expand...
Click to collapse
I actually solved the problem a few moments ago
What i did wrong was, when i sideload the rom rom file with twrp i always cleared the dalvik and cache file
let me make a little guide for you..hope that will help
1. install twrp recovery
2. go to wipe section -> advanced wipe -> wipe all 4(Dalvik/ART cache, System, Data, Internal Storage)
3. do a factory reset and format data
4. go to mount section and check all the boxes (system, data, vendor)
5. sideload the repartition zip according to your storage and device model (mine was pixel xl 32gb)
6. after sideload is done reboot the system..it will reboot into recovery again
7. then again sideload the rom file (don't check the clear cache and dalvik boxes)
8. after that is done, go back to main menu and go to reboot-> switch to slot B-> Reboot into system
Hopefully you're done
Note: don't skip any step regarding how minor it is
and if you wish you can also follow the official instruction: https://wiki.pixelexperience.org/devices/marlin/install/
Let me know if it works for you
Best of luck!