Hi everyone,
I have some troubles to install the gapps with the Cyanogenmod 7.2 ; I made lots of tries and have several behaviors:
1.
- Wipe Everything (Wipe Cache, Wipe Dalvik Cache, System, Ext, etc.)
- Flash CM7
- Flash gapps (gapps-gb-20110828-signed)
- Reboot
--> Infinite Boot Loop
2.
- Wipe Everything
- Flash CM7
- Reboot
- Setup my preferences, etc.
- Restarting
- Flash gapps (gapps-gb-20110828-signed)
- Reboot
--> Touch the Droid to start --> Touching it --> nothing
I have tried lotfs of things like clearing the cache after the flash or when it does not do anything when I click on the android, I waited several minutes but nothing seems to work: i'm unable to have the CM7.2 working with the gapps.
Any idea to help me?
Thank's a lot guys!
Related
LT81i
baseband 56
flashed the kernel inside cm7.2
flashed the rom
flashed gapps
wipe factory
the rom worked with one issue when i turn on the WiFi it wont work and turn off it self again ????
any help please???
Weird i used to have CM7.2 and the wifi worked fine... reboot the phone, if it still happens reflash the kernel
on a quick note the way to successfully install a ROM is to: Copy the .zip to the SD card (GAPPS to optional) > flash the boot.img (kernel) > do a "Wipe data / factory reset", "Wipe cache partition" and "Wipe dalvik cache" install the ROM.zip and Gapps > reboot the phone
Hello guys, I need some advice ...
I have an ace with two previously a CM11, I proceeded through odin restore with original ROM JB (I8160XXNA1_I8160ITVNA1_HOME.tar) and then, once combed the new rom I proceeded to install the new rom and kernel Ace2Nutzer with this procedure:
Wipe Cache + wipe data / factory reset
Go advanced
wipe Dalvik cache
go back
install zip from sdcard
install zip from sdcard1
..then I selected the rom Ace2Nutzer (cm ROM: 20150714) and installed
..then I selected the patch Patch1 (for CM11: 20,150,714) and installed
..then I selected the gappps (HDPI_mini-gapps-kk-20150617-signed) and instllata
..then I selected kernel (latest ver 20151130) and installed
..then I selected parameters NovaThor (NovaThor Settings v1.6.6) and installed
go back and reboot system ..
At this point I figured all the phone ...
The rom is very good and congratulations for the work, but I have a problem; a low battery desktop nova flashes without background and then opens a window that says: android.system.mui the process was interrupted and I'm forced to turn off power button and put them in charge as the phone is not responding to commands
Someone kindly help me? I do not have practical installations rom, I run the right procedure of installing the kernel and rom?
Thank you
Anyone with this problem even on other rom?
Hello, I wanted to try PixelExperience 8.1 from AndyYan and after flash, every time I tried to reboot to system, it keep booting into twrp. I am at Xiaomi.eu Miui10 8.8.16, and this is what I did step by step :
1. wipe data, cache, dalvik (factory reset)
2. flash 8.4.19 global firmware
3. flash rom
4. reboot
I tried to wipe system + factory reset, and then proceed from step 2. with same effect. my twrp: 3.2.3-0. What do I did wrong?
You need a pc for transfert your backup and after to :
- format data
- wipe all
- reboot recovery
- copy your rom and flash
- reboot
And need the right recovery
Hi you guys
Can anyone tell me how back from custom rom to miui.eu, how to do that?
I had Resurrection Remix Oreo RR-O-v6.1.0-20180817-sagit-Official.zip and I wanted update to RR-O-v6.2.1-20181017-sagit-Final.zip.
After update I have all issues: can not unlock phone after power on, reboot to system almost everytime.
Newest TWRP twrp-3.2.3-4-arian-sagit make a big mess with my time zone and all next attempts to install any version of twrp take over the same time zone error
I came to the conclusion that I think I will return to miui.eu
And forget how to do that
1. Try:
- Boot into this TWRP
- Wipe system, cache and dalvik cache, art, data
- install xiaomi.eu_multi_MI6_8.10.25_v10-8.0
- reboot to system
Code:
No OS Installed! Are you sure you wish to reboot?
2. Try:
- Boot into this TWRP
- Wipe system, cache and dalvik cache, art, data
- format data - write yes tap ok
- Boot into this TWRP again, copy rom from pc
- install xiaomi.eu_multi_MI6_8.10.25_v10-8.0
- reboot to system
Code:
No OS Installed! Are you sure you wish to reboot?
as a result, I have a clean phone with no OS and recovery twrp-3.2.3-4-arian-sagit
I format data and then wipe all, try that.
that no os msg ur getting, if u can get miui to boot then it doesnt matter. give it a few min after you reboot even if it says there's no OS, mby its worth the try.
_euphonic_ said:
Hi you guys
Can anyone tell me how back from custom rom to miui.eu, how to do that?
I had Resurrection Remix Oreo RR-O-v6.1.0-20180817-sagit-Official.zip and I wanted update to RR-O-v6.2.1-20181017-sagit-Final.zip.
After update I have all issues: can not unlock phone after power on, reboot to system almost everytime.
Newest TWRP twrp-3.2.3-4-arian-sagit make a big mess with my time zone and all next attempts to install any version of twrp take over the same time zone error
I came to the conclusion that I think I will return to miui.eu
And forget how to do that
1. Try:
- Boot into this TWRP
- Wipe system, cache and dalvik cache, art, data
- install xiaomi.eu_multi_MI6_8.10.25_v10-8.0
- reboot to system
2. Try:
- Boot into this TWRP
- Wipe system, cache and dalvik cache, art, data
- format data - write yes tap ok
- Boot into this TWRP again, copy rom from pc
- install xiaomi.eu_multi_MI6_8.10.25_v10-8.0
- reboot to system
as a result, I have a clean phone with no OS and recovery twrp-3.2.3-4-arian-sagit
Click to expand...
Click to collapse
Foa this is the wrong place, use the Question / Help section.
Sad to hear you can't use the final RR build, which works just fine. Also my twrp build inst nuking the time, it isn't working on all new builds.
To go to miui you just need to do the steps from your try 2.
SM-G960F/DS is bootlooping regardless of what GSI/gapps/kernel/etc is being installed post-PIE update.
I had, at one point, installed an 8.1 GSI long ago before I installed the CSD1 update and managed to get it to boot, but have not been able to get one to boot at all now.
Just looking for some input from anyone else running GSI's or trying to at least.
So, just to clarify, these are the steps I went through from a fresh CSD4 build. (With no success.)
Advanced Wipe
>Selected Dalvik/ART Cache, System, Data, and Cache and wiped.
Install
>Selected GSI (Tried multiple ones, such as Resurrection Remix and Havok's)
Reboot into recovery
Advanced Wipe
>Selected System, then Resized
Install
>Selected Gapps (Tried OpenGapps, phh's GSI gapps and bitgapps)
>Tried installing custom kernels, Magisk, and vendor/firmware files when GSI+gapps didn't work.
Reboot into system
>System will reboot, show the boot screen, restart, show the boot screen again, then reach the boot animation where it will remain.
Regardless of image/gapps/kernel/vendor/firmware, it has resulted in bootloops
Currently (attempting to) pull any log I can get.
I'd appreciate any help I can get here.
Thanks.