Develop Bugs

Cyanogenmod updates

I installed CM7 7.1 RC1 yesterday and have a question regarding updates. I can see a lot of nighly builds (on quarx site). Can someone write/explain (or point me to thread [couldn't find any]) how to install newer versions (nighlies) over the working CM7?

The basic procedure is as follows:
- Disable USB Debugging
- Reboot to recovery
- When led flashes blue, press volume down
- Select "Custom Recovery", "Stable"
- Select "wipe cache partition" then "wipe data/factory reset"
- Select "install zip from sdcard", "choose zip from sdcard", then select the nightly zip
- Select "Go Back"
- Select "reboot your system now"
Sometimes you don't want to wipe data; Just skip that step. If stuff fails, you can always try wiping data later.

Great stuff! It's working. Didn't know that it it so straight forward .

if you wanna follow the nightlies you dont have to wipe data on each update. you can keep all the apps and settings by only perform "wipe cache" then go advance and wipe dalvik cache.

5starfish said:
if you wanna follow the nightlies you dont have to wipe data on each update. you can keep all the apps and settings by only perform "wipe cache" then go advance and wipe dalvik cache.
Click to expand...
Click to collapse
...and wipe cache, wipe dalvik is important for killing some bugs,as I experienced before install zip and once again after too.

problem after install zip

HI all super place this is would like a little help if possable
iv got a sony arc s can root and load in to recover mode but when i try to install any rom from zip it will do all the normal stuff then says reboot ..
after that it just sstays on the sony logo does not go no more no matter how long i leave it ... can you help me in this am i doing some thing wronge :fingers-crossed:

flash the supporting kernel
PLZ SPECIFY WHICH RO YOU HAVE INSTALLED
if you are using a custom rom then IT IS NECESSARY TO FLASH THE KERNEL FOR THE SAME!!!
Eg:- if using ics based rom the flash a kernel for ics, if using cynogenmod the flash the kernel for that..etc
also clear cache,wipe data and dalvik cache using CWM..
_______________________________________________________________________________________________
**IF YOU THINK I HELPED THEN SHOW IT BY PRESSING THE THANKS ICON**:good:

If you want to flash the custom kernel, you should unlock bootloader first.
If your bootloader is unlocked, first flash the custom kernel (ics/jb/gb) thru fastboot that supports the ROM you are installing.
After flashing the custom kernel, wipe user data, wipe cache partition, advanced-> wipe dalvik cache and flash the ROM. Reboot the phone.

hi thanks for your replys
im trying to install
Original Xperia T ICS Rom v5.0 for ARC/ARC-S based on (4.0.4) 587 [9th-Oct-2012]
http://forum.xda-developers.com/showthread.php?t=1746508
mybe a step im doing wronge im not shore follow it step by step
3.1- wipe factory date <<<< does not show this where is this or is it called soem thing els
3.2- wipe cache partition
3.3- wipe delvik cache
3.4- wipe system <<<< does not show this where is this or is it called soem thing els
i see
reboot otions
install zip from sd
apply /sd/update
factory reset
wipe cache partition
backup restore
mount storage
advanced
power off
in advance
reboot recovery
wipe dalvik cache
wipe battery stats
reboot error
key test
show log
partition sd card
fix permissions
that all that in recovery
?

Its in detail!!
THAT'S an ICS rom from xperia t
FROM that post it's clear(text copied from the post)
STEPS ARE QUITE CLEAR AND STRAIGHT FORWARD
How to install.... please do all step as i am describing
Step-1) Download & Flash the kernel From here available in downloads
Quote:
Step-2) Please download Xperia Arc-S 4.0.4_431 ftf pack from here only and flash it through flash tools , in Arc and arc-s both , FTF is available in downloads
Flash every thing from ftf pack just exclude two things
1. simlock.ta
2. Kernel.sin
do not flash these two things, after flash power up your phone and let it start completely, now copy rom zip into SD card , and reboot your device into recovery
Why you need to do this ???
It will give you 440-MB internal memory and 419-MB System Rom memory
If you already have these memories then you can skip this step
3) go into recovery and wipe these things
3.1- wipe factory date
3.2- wipe cache partition
3.3- wipe delvik cache
3.4- wipe system
4) now flash my rom after flash reboot your phone and wait for 60 seconds
5) Tick unknown source, then reboot it recovery again and flash the Xperia T lock-screen mod
6) reboot and enjoy do not wipe data after this for more info read recommendations
Click to expand...
Click to collapse
AGAIN FOR YOUR BETTER UNDERSTANDING
**YOUR BOOTLOADER MUST BE UNLOCKED AND YOU MUST HAVE THE KERNEL INSTALLED PROVIDED IN THAT POST
**YOU MUST install THOSE FTF files excluding (THIS STEP IS DONE IN ORDER TO INCREASE THE INTERNAL MEMORY CAUSE XPERIA T ROM REQUIRE A HIGHER VALUE OF INTERNEL MEMORY WHICH IS BY DEFAULT NOT PRESENT IN ARC/S)
1. simlock.ta
2. Kernel.sin
**NOW GO INTO RECOVERY
3.1- wipe factory date ==factory reset
3.2- wipe cache partition
3.3- wipe delvik cache
3.4- wipe system ==MOUNT and storage>format/system
**THEN install the rom (the zip file) via install zip from sdcard
then step 5,6
I THINK I MADE IT QUITE DESCRIPTIVE NOW AND YOU WOULD BE ABLE TO INSTALL THAT ROM
BTW YOU MUST POST THIS PROBLEM IN THAT THREAD ITSELF SO THAT OTHER PERSON WHO IS FACING THE SIMILAR PROBLEM OR HAVE OVER-COME THIS PROBLEM CAN HELP FOR SURE!!!
---------------------------------------------------------------------------------------------------------------------------------------------
**IF YOU THINK I HELPED THEN SHOW IT BY PRESSING THE THANKS ICON""IT'S FREE:good:

thanks m8 will try now let you know thanks again for your reply

m8 i cannot thank you any more it worked thank q again :good:

Instructions for updating to CleanROM 2.0 R2

Question,
If one used these instructions originally to install Clean Rom version 1.5 on their Galaxy Note 10.1 (2014)
-boot to download mode and Flash autorootp600mj4.tar.md5 via ODIN AP slot keep default settings.
-Let it reboot to ROM by itself
-Back up apps with TB (you should have root now)
-Copy Clean ROM 1.5 zip file (or newer) to your EXT SD CARD (internal will be erased when doing factory reset next steps)
- reboot to download mode and Flash stockrecoverymj4.tar.md5 via ODIN AP slot keep default settings.
-Just when rebooting hold power+vol UP to go to stock recovery you just flashed (no need to let it boot to ROM, if you miss its ok just reboot from ROM and do the button combination when booting up i.e. before spashscreen shows up)
-Factory reset and reboot
-Just when rebooting hold power+vol DOWN to go to download mode (If you miss the button combination reboot from ROM to recovery and factory reset and then repeat this step)
-Flash TWRP (openrecovery-twrp-2.6.3.3-lt03wifiue.zip) from ODIN AP slot
-Just when rebooting hold power+vol UP to go to TWRP you just flashed (If you miss this step you have to flash stock recovery again to do the factory reset, AFAIK doing factory reset from TWRP has issues so I didnt do it, only use stock recovery for that)
-go to settings and check rm -rf
-mount ExtSDcard
-install Clean ROM (DO NOT wipe again)
Click to expand...
Click to collapse
To update to 2.0 R2, would this now be the procedure to ensure a proper flash to new version?
-First backup whatever apps/data you need.
-Copy Clean ROM 2.0 R2 zip to your EXT SD CARD (internal will be erased when doing factory reset next steps)
-Reboot - hold power+vol UP - IN TWRP which is already installed = Choose advance tab under wipe, then choose wiping system, cache & Dalvik cache. (Don't choose data because boot loops can occur?)
-go to settings and check rm -rf (is this step necessary?)
-mount ExtSDcard
-install Clean ROM (DO NOT wipe again)
Thanks

-First backup whatever apps/data you need.
-Copy Clean ROM 2.0 R2 zip to your EXT SD CARD (internal will be erased when doing factory reset next steps)
-Reboot - hold power+vol UP - IN TWRP which is already installed = Choose advance tab under wipe, then choose wiping system, cache & Dalvik cache. (Don't choose data because boot loops can occur?)
-go to settings and check rm -rf (is this step necessary? - I checked this, not sure if I had to)
-mount ExtSDcard
-install Clean ROM (DO NOT wipe again)
Click to expand...
Click to collapse
I followed the above to upgrade, but all my apps (and settings like wifi password) that I had installed were still present after the install of Clean Rom 2.0 R2. Is that because I did NOT choose to wipe the DATA in the wipe process from TWRP? Is there any caveats to updating like this?
Thanks

Problem android.system.mui interrupted in rom ace2Nutzer

Hello guys, I need some advice ...
I have an ace with two previously a CM11, I proceeded through odin restore with original ROM JB (I8160XXNA1_I8160ITVNA1_HOME.tar) and then, once combed the new rom I proceeded to install the new rom and kernel Ace2Nutzer with this procedure:
Wipe Cache + wipe data / factory reset
Go advanced
wipe Dalvik cache
go back
install zip from sdcard
install zip from sdcard1
..then I selected the rom Ace2Nutzer (cm ROM: 20150714) and installed
..then I selected the patch Patch1 (for CM11: 20,150,714) and installed
..then I selected the gappps (HDPI_mini-gapps-kk-20150617-signed) and instllata
..then I selected kernel (latest ver 20151130) and installed
..then I selected parameters NovaThor (NovaThor Settings v1.6.6) and installed
go back and reboot system ..
At this point I figured all the phone ...
The rom is very good and congratulations for the work, but I have a problem; a low battery desktop nova flashes without background and then opens a window that says: android.system.mui the process was interrupted and I'm forced to turn off power button and put them in charge as the phone is not responding to commands
Someone kindly help me? I do not have practical installations rom, I run the right procedure of installing the kernel and rom?
Thank you

Anyone with this problem even on other rom?

Stuck in Twrp reboot loop

I recently installed twrp and for my moto g5 then I did format data later on went for reboot system then I found no os installed so I installed a custom Rom later rebooted the system then I got stuck in twrp loop. I went through all the solution but it did not work so please help. Thank you

If you're on stock rom you need to remove dm-verity for it to boot (read faqs on twrp thread!)
For custom rom flash it correctly
Wipe
Advanced wipe
Wipe system data cache
Install
Select rom zip
Select gapps zip
Select root zip (optional)
Wipe cache
Restart

What architecture rom and twrp are you using?