htc amaze stuck on boot after upgrade to 10.1 issue - Upgrading, Modifying and Unlocking

Hi,
I am trying to upgrade my htc eamaze (ruby) to Cyanogenmod 10, but after installation in recovery mod, it stuck on boot white screen. I read on somethread that flash boot into android phone but that shows the boot animation and then gets restarted. What can be the issue? Please help. I am following the steps as:
Boot into Clockwordmod Recovery
Factory Reset/wipe data
Wipe cache partition
wipe Dalvik cache
install from sd card CM 10
install from sdcard gapps
Reboot system now
For flashing boot.img
fastboot flash boot boot.img
I have downloaded cm-10.1-20130518-UNOFFICIAL-ruby and gapps-jb-20130812-signed
Please help !!!!.
Thanks

Related

[Q] TripnDroid problems

Hi
I just flashed Tripndroid CM10 0.28 by
flashing boot.img through fastboot usb
going into recovery and factory resetting
then flashing the rom
and then reboot system
When it boots up it says gapps stopped and sais unfortunately setup wizard has stopped, have I done something wrong here?
How can I get it to work?
you have not wiped cache...
1. download rom and gapps,transfer them to root of SD card
2. extract boot.img(the kernel) from ROM zip and place it in fastboot folder
3. go into bootloader, FIRST flash the boot.img in fastboot(does the screen say FASTBOOT USB when u connect the phone to the PC?)
4. go into recovery, then FULL WIPE-factory reset, erase cache and dalvik cache.
5. then flash the ROM.
6. boot into the rom.then again enter into recovery and then flash gapps.
do the above steps in the same order all over again....it should work

[Q] tried Flashing and a new ROM >> BOOT LOOPS

Hello, i tried to put a new rom on my phone.
First i unlocked the bootloader with One_X_All-In-One_Kit_v2.3. that worked. Then i loaded CWM ( v 5.8.4.0) on my phone (that works).
Then i downloaded the cm-10.1-20130331-NIGHTLY-endeavoru. Put that one on my SD card, extracted the boot.img. used fastboot and it commands. Installed it and gapps-jb-20120726-signed too. Did the wipes. But the phones keeps hanging at the HTC logo and doesnt boot anymore. If i hold the power button it just reboots en hangs. I can get into HBOOT ( 1.39.0000)
RADIO-5.1204.162.29
eMMC-bootmode disabled
CPU-bootmode disabled
And yes i was so stupid not to make a back first....
Re: [Q] tried Flashing and a new ROM >> BOOT LOOPS
You need to install the vendors installer too
http://db.tt/u5FF3jgi
So its full wipe then install
Cm10.1
Gapps
Vendors
Will i tried it again with the Android Revolution HD 19.2, the phone booted now past the HTC quietly brilliant logo but hung at the HTC ONE Beats Audio logo. Started it up again..and it boots. BUT the screen doesnt respond anymore? I cant type my pincode...?
Well tried the CM 10.1 because my screen didnt seem to work with the Revolution version.....did all u said above....We are back to square one, the phone hangs at HTC quietly brilliant logo.
Re: [Q] tried Flashing and a new ROM >> BOOT LOOPS
Mr Hofs said:
You need to install the vendors installer too
http://db.tt/u5FF3jgi
So its full wipe then install
Cm10.1
Gapps
Vendors
Click to expand...
Click to collapse
RASEVEN said:
Well tried the CM 10.1 because my screen didnt seem to work with the Revolution version.....did all u said above....We are back to square one, the phone hangs at HTC quietly brilliant logo.
Click to expand...
Click to collapse
You must flash the vendor installer .zip after installing cm10.1 and gapps.
By the way there is a newer gapps for this rom : http://goo.im/gapps/gapps-jb-20130301-signed.zip
Sent from my HTC One X using xda app-developers app
Re: [Q] tried Flashing and a new ROM >> BOOT LOOPS
Then you might be forgetting something to wipe ?
Factory reset
Wipe cache partition
Advanced - wipe dalvik cache
Mounts & storage - format cache, data, system
Then install the CM10.1, Gapps, Vendors (without rebooting !!!)
Head down to the bootloader, type this in the command window :
Adb reboot bootloader (at this point you are still in the recovery)
Then flash the boot.img again.make sure you override the right boot.img to the fastboot folder !
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Fastboot reboot
If you do it like this it must boot up normally.
Edit : David, please stop repeating me in posts ..... its starting to get annoying. I already told him to install the vendors . Thank you.
Re: [Q] tried Flashing and a new ROM >> BOOT LOOPS
Mr Hofs said:
Then you might be forgetting something to wipe ?
Factory reset
Wipe cache partition
Advanced - wipe dalvik cache
Mounts & storage - format cache, data, system
Then install the CM10.1, Gapps, Vendors (without rebooting !!!)
Head down to the bootloader, type this in the command window :
Adb reboot bootloader (at this point you are still in the recovery)
Then flash the boot.img again.make sure you override the right boot.img to the fastboot folder !
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Fastboot reboot
If you do it like this it must boot up normally.
Edit : David, please stop repeating me in posts ..... its starting to get annoying. I already told him to install the vendors . Thank you.
Click to expand...
Click to collapse
It just seems that he didnt notice your post right
Sent from my HTC One X using xda app-developers app
Re: [Q] tried Flashing and a new ROM >> BOOT LOOPS
If he mis the text including a downloadlink........then he's freekin blind !
YAY!!! IT FINALLY WORKS. THNX TO YOU AND http://forum.xda-developers.com/showthread.php?t=1658084 this thread...
If yer One X is low on enegergy it will not charge when the bootloader is locked, but with a scripted (see thread) batch.BAT u can make it charge ...FINALLYY!!
Re: [Q] tried Flashing and a new ROM >> BOOT LOOPS
Good !
CASE CLOSED !

[Q] Its either no touch or no carrier network on my HTC One X

Hello,
After last one 4.2.2 update my phone was stuck at the HTC One Beats audio logo.
Then I tried restoring nandroid backup(with CID HTC__038)(http://forum.xda-developers.com/showthread.php?t=1975140) and then flashing boot.img. But this left me with no touch support.
So I tried a rom from here(http://forum.xda-developers.com/showthread.php?t=2107669) but then my phone stuck at HTC Quietly brilliant logo even after flashing boot.img.
Now when I tried to restore the nandroid back from the first link, the phone worked and the touch was working again. But this time, the phone doesn't show any carrier networks. flashing with the boot.mg from this nandroid stopped the phone's touch from working, but then the carrier network came back.
So what do I do next?
My HBOOT version is 1.73.0000
The second should work, did you perform a real full wipe before installing the rom.zip ?
sent from my .......
Yes I cleared any caches and formatted by partitions using the recovery.
Also I did clear the cache using fastboot command, but still no luck. I heard something like AROMA installer's boot.img won't work or something like that. Could that be the problem?
And thanks for replying.
What recovery are you using so i can describe all steps in detail
sent from my .......
TWRP recovery.
BTW I think you should know this. My phone was stuck at boot screen(the htc one beats audio logo) after I did the latest update. I was doing this for recovering from that.
Try this :
Flash this recovery
https://db.tt/MNtVjpOJ
Rename the file to recovery.img and flash it
Fastboot flash recovery recovery.img
Then flash the boot.img from the sd rom.zip
Fastboot flash boot boot.img
Fastboot erase cache
Then enter the recovery and do :
Factory reset
Wipe cache partition
Advanced - wipe dalvik cache
Mounts & storage - format cache, data, system
Then install the sd rom.zip and reboot
sent from my .......
I think you had suggested this same steps to someone else in here right?
I am not sure, but if you had I have already tried it.
Anyway I will try to do it again. Thanks so much for this!
Yep but its a method that should work flawlessly ! If not report back and see for other solutions
sent from my .......

Can't boot into rom or wipe phone. Completely stuck, please help!

This morning I found my phone stuck on the boot logo displaying the model number. Nothing I can do gets it to go past this screen (I can boot into TWRP recovery and Download mode). The following are things I have tried:
1. Boot into recovery and wipe Dalvik/Cache (Nothing changes)
2. Boot into recovery and Factory reset (Factory reset fails)
3. Boot into recovery and advanced wipe all partitions (Wipe fails, can't access /data/media)
4. Boot into recovery and format data (Seems to work asks for restart but nothing changes)
5. Boot into recovery and install clean CM Rom (Seems to succeed but still doesn't go past boot on restart)
5. Boot into download and attempt restore to stock using Samsung Kies (Fails when trying to flash stock to phone)
6. Boot into download and attempt to flash stock using Odin (Fails)
7. Boot into download and attempt to re-partition using .pit file and restore stock firmware (Fails when trying to re-partition)
Everything I've tried just seems to fail and the phone still doesn't go past the boot logo. I can still boot into recovery and download mode. Please help I'm at wits end.

Stuck in Twrp reboot loop

I recently installed twrp and for my moto g5 then I did format data later on went for reboot system then I found no os installed so I installed a custom Rom later rebooted the system then I got stuck in twrp loop. I went through all the solution but it did not work so please help. Thank you
If you're on stock rom you need to remove dm-verity for it to boot (read faqs on twrp thread!)
For custom rom flash it correctly
Wipe
Advanced wipe
Wipe system data cache
Install
Select rom zip
Select gapps zip
Select root zip (optional)
Wipe cache
Restart
What architecture rom and twrp are you using?

Categories

Resources