[Q] TripnDroid problems - HTC One X

Hi
I just flashed Tripndroid CM10 0.28 by
flashing boot.img through fastboot usb
going into recovery and factory resetting
then flashing the rom
and then reboot system
When it boots up it says gapps stopped and sais unfortunately setup wizard has stopped, have I done something wrong here?
How can I get it to work?

you have not wiped cache...
1. download rom and gapps,transfer them to root of SD card
2. extract boot.img(the kernel) from ROM zip and place it in fastboot folder
3. go into bootloader, FIRST flash the boot.img in fastboot(does the screen say FASTBOOT USB when u connect the phone to the PC?)
4. go into recovery, then FULL WIPE-factory reset, erase cache and dalvik cache.
5. then flash the ROM.
6. boot into the rom.then again enter into recovery and then flash gapps.
do the above steps in the same order all over again....it should work

Related

question about paranoidandroid

hello.
i just change my phone from galaxy s i9000 to htc one x and i'm loving it.
so i want to tried paranoidandroid but it didn't specified about the room working with hboot 1.3.6
i tried to install it, flash boot img and everything but then i got stuck at htc logo.
i've read the forum but non specified anything except that i can used the boot img in the rom file.
so if anyone can help to run paranoidandroid in my htc one x. all help will be appreciated.
1. download rom and gapps,transfer them to root of SD card
2. extract boot.img(the kernel) from ROM zip and place it in fastboot folder
3. go into bootloader, FIRST flash the boot.img in fastboot(does the screen say FASTBOOT USB when u connect the phone to the PC?)
4. go into recovery, then FULL WIPE-factory reset, erase cache and dalvik cache.
5. then flash the ROM.
6. boot into the rom.then again enter into recovery and then flash gapps.
do the above steps in the same order all over again....it SHOULD work..
You need a special boot.img for 1.36 hboot because of some compatibility issues.
well. i didnt find the special boot img to make it work with hboot 1.3.6

[Q] Phone Dont Work After Flashing CM10

Hi , Yesterday I tried to flash Cm10 official I did everything after the steps Changing my boot.img flash gapps and rom and I wipe everything before. But when I tried to turn my phone on he was stuck on black screen , I am rooted and unlockdbootloader of curse and I am s-on.
Using CWM Bootloader works fine and recovery aswell so I tried to back my HTC Sense+ nandroid backup and i am wiped every thing before but I'ts steel doesn't bootup does i need to flash Sense Boot.img ?
You need to flash the boot.img that is delivered within the rom.zip.
What hboot version do you have ? If you are on the JB hboot i suggest you try CM10.1
ok
Mr Hofs said:
You need to flash the boot.img that is delivered within the rom.zip.
What hboot version do you have ? If you are on the JB hboot i suggest you try CM10.1[/
Ops sorry I am a noob and hboot is 1.36 I think can you give me a guide to flashing IceColdJelly ?
Click to expand...
Click to collapse
I know now why CM10 didn't boot, because it needs a modified boot.img !
Icecoldjelly.....pretty much the same as any other Rom
Put the phone in the bootloader and flash the boot.img from the rom
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Enter the recovery and put the rom.zip on the sdcard (mount as usbdrive)
Then perform a full wipe
Factory reset, wipe cache,dalvik cache
Format cache,data, system
Then install the rom.zip and gapps if it has it !
ok
Mr Hofs said:
I know now why CM10 didn't boot, because it needs a modified boot.img !
Icecoldjelly.....pretty much the same as any other Rom
Put the phone in the bootloader and flash the boot.img from the rom
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Enter the recovery and put the rom.zip on the sdcard (mount as usbdrive)
Then perform a full wipe
Factory reset, wipe cache,dalvik cache
Format cache,data, system
Then install the rom.zip and gapps if it has it !
Click to expand...
Click to collapse
How can I move IceColdJelly from my computer to the phone without boot ?
You must mount the internal sdcard as a usb diskdrive, you have the option inside the recovery. What version do you have ?
i have a similar issue with my one X. i flashed it something went wrong and i now dont have an SD card or storage on my phone? any suggestions
artsonex said:
i have a similar issue with my one X. i flashed it something went wrong and i now dont have an SD card or storage on my phone? any suggestions
Click to expand...
Click to collapse
What recovery do you use, and also what version ?

[Q] Flashing Blackout ROM Phone now just boots to Clockwork

Sorry to intrude guys but this is my first post so please be kind.
Since this happened i have searched these forums and now im more confused than ever so i am hoping someone can help me.
I have never done anything like this before so took the time to read up.
i unlocked the bootloader with HTCDEV, one i had done that i followed these instructions
Flashing roms with an unlocked bootloader
Unlock your bootloader and flash a custom recovery (CWM or 4ext)
Download the rom zip file you are willing to flash to your PC.
Extract the the boot.img from inside the zip file (do not extract the whole rom)
Put the zip file in your sdcard.
Boot into recovery and do a full wipe (wipe data/factory reset, wipe cache partition, format system)
Flash rom (install zip from sdcard)
Reboot into bootloader again and plug the phone to the PC.
You need to be in fastboot usb (if you see HBOOT USB PLUG in the phone, just press power to toggle)
Open a cmd/terminal and navigate to where the boot.img file is located.
Type: fastboot flash boot boot.img
Reboot and now you should be enjoying your custom rom
the install of Blackout ICS ROM seemed to go ok, once i had flashed the boot.img in the last step i rebooted and now once past the HTC screen loads of lines appear on the screen which gradually fade and then it just reboots to Clockwork recovery.
I have tried to recover using the back up that was made and this makes no difference.
My phone isnt rooted and as i say im more confused as to my next step than ever

After flashing the sybria 9.0 rom into my mix 2, my phone stuck in the fastboot mode.

After flashing the Syberia 9.0 rom into my mix 2, my phone stuck in the fastboot mode. Every time I tried to reboot my phone, my phone will go right into the fastboot mode. I could get into the TWRP, and I perform the 'wipe' serval times.
This is what happens on my phone:
wipe the system---- flash the rom ------ reboot ----- fastboot mode
I don't know what happens with my phone. Pls help me guys:crying:
Could I try to use the official miui fastboot update via the mi flash?
Try installing again with "Clean Flash". Wipe System, Cache/Dalvik and format Data (don't wipe data).
Backup your data first, because your data will destroy.
I believe you should already have the ROM, Firmware and Gapps into internal storage.
Now boot to recovery.
Wipe Data (if u are decrypted, format data)
But be aware that formatting Data means that you have to again copy everything back to internal storage using adb. So my advice is to just wipe and see if that works out.
Install Firmware, ROM and Gapps zip.
Order of installation should be same.
Reboot - 1st boot may take some time.

I can't flash TWRP

I want to flash twrp but after I boot twrp.img from bootloader, my phone stucks at nokia logo
I use pixel experience
I recommend you following the steps on https://forum.xda-developers.com/t/nokia-8-nb1-full-rom-installation-guide.4349525/
There's probably another way but this is the way I would do it.
Backup the data inside your phone.
Flash the T-Virus 2.0 (steps above).
After flashing, the phone will boot to the stock rom, turn it off.
Follow the steps to go to recovery: Flash the Pixel Experience first and TWRP recovery afterwards.
Format data or wipe dalvik / cache.
Reboot to ROM.
Have fun!
Do fastboot flash boot twrp.img

Categories

Resources