Lg G3 D855 hard brick need help
Hi guys my phone has bricked so i tried to do the tot method and is almost worked but i saw on the screen that blue background and a white text "Reset factory status" something like that...
and the number "2" in a big so i checked what the hell is that number 2 means and it means that is not good becouse to finish the hard reset i need to see the same blue backgroud but with the number "3" thats means that every thing is ok .
so after that i tried to flash it again on Lg Flash Tool and it take 14 seconds to tell me that "Cant Change To Download Mode 00000064" and every thing is ok my phone did changed to the download mode but on the program it says that it cant change to download mode ?:
some one can help me please i will appriciate that !
Q. When I tried to follow the above method I get a "Can't change to download mode" error referencing "Error 00000064"
A. I experienced this several times when attempting to un-root using a USB 3.0 port. Connect the phone using a USB 2.0 port preferably connected directly to the computer - and make sure the phone is already in download mode. Occasional you may need to unplug the USB cable from your phone for a couple of seconds and reconnect to get the process started.
CR : http://forum.xda-developers.com/att-lg-g3/general/unroot-return-to-factory-stock-att-lg-g3-t2820827
Duckscreen said:
Q. When I tried to follow the above method I get a "Can't change to download mode" error referencing "Error 00000064"
A. I experienced this several times when attempting to un-root using a USB 3.0 port. Connect the phone using a USB 2.0 port preferably connected directly to the computer - and make sure the phone is already in download mode. Occasional you may need to unplug the USB cable from your phone for a couple of seconds and reconnect to get the process started.
CR : http://forum.xda-developers.com/att-lg-g3/general/unroot-return-to-factory-stock-att-lg-g3-t2820827
Click to expand...
Click to collapse
what do you mean when you said connect to USB 2.0 port ? how i do that ?
http://forum.xda-developers.com/lg-g3/general/unbrick-lg-g3-qhsusbbulk-qualcomm-9008-t3072091
Read in its entirty
---------- Post added at 07:25 AM ---------- Previous post was at 07:09 AM ----------
Sorry answer posted in wrong thread
---------- Post added at 07:26 AM ---------- Previous post was at 07:25 AM ----------
This is for a hard brick
---------- Post added at 07:27 AM ---------- Previous post was at 07:26 AM ----------
Usb 2.0 is a standard port like my computers 3.0 is on the back
---------- Post added at 07:31 AM ---------- Previous post was at 07:27 AM ----------
When you're stuck at the factory reset status 2 page, you should go through the entire guide linked before. then at Step 7, instead of having the LG FlashTool set to 'Upgrade DL', you should change it to 'Board DL'.
You'll see an AAT screen(you will know what this is when you see it) on your LG G3. Click OK here, even though it says not to, then you press and hold the power button so you can reboot normally
https://m.reddit.com/r/LGG3/comments/2obqre/please_help_phone_stuck_in_factory_reset_status_2/
This is the correct link
TheMadScientist420 said:
http://forum.xda-developers.com/lg-g3/general/unbrick-lg-g3-qhsusbbulk-qualcomm-9008-t3072091
Read in its entirty
---------- Post added at 07:25 AM ---------- Previous post was at 07:09 AM ----------
Sorry answer posted in wrong thread
---------- Post added at 07:26 AM ---------- Previous post was at 07:25 AM ----------
This is for a hard brick
---------- Post added at 07:27 AM ---------- Previous post was at 07:26 AM ----------
Usb 2.0 is a standard port like my computers 3.0 is on the back
---------- Post added at 07:31 AM ---------- Previous post was at 07:27 AM ----------
When you're stuck at the factory reset status 2 page, you should go through the entire guide linked before. then at Step 7, instead of having the LG FlashTool set to 'Upgrade DL', you should change it to 'Board DL'.
You'll see an AAT screen(you will know what this is when you see it) on your LG G3. Click OK here, even though it says not to, then you press and hold the power button so you can reboot normally
https://m.reddit.com/r/LGG3/comments/2obqre/please_help_phone_stuck_in_factory_reset_status_2/
This is the correct link
Click to expand...
Click to collapse
hi dude im going by his tips step by step and i hava changed to Board DL and it still tells me that cant change to download mode after 15 seconds and i didnt saw nothing that looks like aat screen :? could you contact me on facebook or skype to help me please ?
Dont have fb or skype
---------- Post added at 08:17 AM ---------- Previous post was at 08:16 AM ----------
Those guides are straight from the source i just passed them along i no nothing more than what they say
---------- Post added at 08:21 AM ---------- Previous post was at 08:17 AM ----------
Try diffrent usb cords diffrent ports theres been times it takes me 10 15 tries when it say cant switch just unplug and plug back in dont restart the proscess. Ofcoarse make sure ur com is set to port 41 in device man im sure it is cause ure makin it to no download switch but seriously follow that guide and like i said try diffrwnt cords my stock lg cord dosnt work rite i have like 5 or 6 differ usb cord but only 2 of them work for tot restore somethin bout how theyre wired
---------- Post added at 08:24 AM ---------- Previous post was at 08:21 AM ----------
Bue the way this isnt in my opinion a hard brick just so u know for future refrence woulda got more hits people are scared to even read stuff about hard bricks cause then theybthink itll happen to them this is just a set back last time i toted mine it took me like 2 hours cause of cables and usb ports like i said keep tryin
---------- Post added at 08:26 AM ---------- Previous post was at 08:24 AM ----------
Im heading to work rite now ill check back in in about about a hour to see whats up
Related
Like the title states I'm stuck on the splash screen. What makes my problem a little tricky is that I can not access recovery and I can not use odin, because the samsung drivers are not installed and will not install until I plug in a booted samsung phone into my computer to prompt the driver install. So, unless there is a way to install the drivers without plugging in the phone or another way to flash cwm (which i lost on a bad rom flash) I am really screwed. Please any help I can get would be greatly appreciated!!
____________________________________________
update: Sprint ended up just giving me a new phone at no charge! problem solved I guess. thanks for everyone's help
Navigate to where you have the drivers on comp. Open the file and look for the one ending in .exe click it and install manually. That should let your comp see your phone.
---------- Post added at 11:50 AM ---------- Previous post was at 11:48 AM ----------
If you don't have the driver package search Samsung kies download drivers and use above instructions.
Heres a link for the drivers.
---------- Post added at 02:01 PM ---------- Previous post was at 01:58 PM ----------
[/COLOR]Heres a link for the drivers. Make sure to unzip first then install. http://www.mitsdrivers.com/pages_epic-touch-4g-drivers.html#
Happened to me once. Just held down Vol up and Power button for a long time and eventually is was able to load itself.
OK so I flash grola ROM and ended up panicking when I noticed recovery or download mode didn't work. So I followed the guide using Linux to flash partitions, but where I made a mistake is with the recovery. I renamed the wrong recovery which was the stock recovery which I flashed and now I'm stuck in qhsusb_bulk. So now I been trying to force the 9006 mode so I can use lgflashtool
This is what u want when hook up on pc as long as u get a bunch of removable drives ure good I don't know the exact like but look up g2 now unbrickable there is a way to do it from windows have had to do mine multiple time if it don't connect as a bunch of removable drives you have to slightly disassemble the phone jump two resistors withe the bat disconnect ed I'll try to find the link
---------- Post added at 12:07 PM ---------- Previous post was at 12:04 PM ----------
Further more your not ready for kg flash tool just yet you have to fix the partitions first look for ure. Update zva zvc zvd with ever one your gonna tot. Back to there also is a blank partition table for download some where
---------- Post added at 12:12 PM ---------- Previous post was at 12:07 PM ----------
http://forum.xda-developers.com/lg-...m.xda-developers.com/showthread.php?t=2582142
---------- Post added at 12:12 PM ---------- Previous post was at 12:12 PM ----------
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-
http://forum.xda-developers.com/showthread.php?t=2582142
---------- Post added at 12:17 PM ---------- Previous post was at 12:12 PM ----------
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
The last 2 links
OK I've tried these and I can't seem to short the resistors. It comes up as qhsusb_bulk but no partitions shows.
Make sure it's the outside of the resistors I had the Same problom I'm just trying to think back and see what fixed it
---------- Post added at 07:07 PM ---------- Previous post was at 07:05 PM ----------
See when I done mine about 6 months ago I accident ly flashed a g3 recovery
---------- Post added at 07:20 PM ---------- Previous post was at 07:07 PM ----------
https://www.youtube.com/watch?v=_d5b_osUTug
---------- Post added at 07:27 PM ---------- Previous post was at 07:20 PM ----------
Can be done in windows and check device man see what mode it is picking phone up as it took me a million trys plug it in hold the power button for like 8 seconds if ure in a dark room u can see the sscreen cycle i didnt use linux
Look for xda user tungkick he guided me throught mine he if im not mstaken he wrote the files when u repartion u need the partitions from ure tot zip also look for tot extracter
---------- Post added at 07:30 PM ---------- Previous post was at 07:27 PM ----------
I was
I can't seem to see the video on how to short the resistors
I have everything like my unbrick files, I just can't seem to get the partitions to show up. It shows qhsusb_bulk in device manager but no partitions
Thats the right mode
It is.? OK so how do I get the partitions to show in disk management. I wish I had some type of hardware knowledge
Thanks for helping me by the way. Also I see that I'm in 9008 mode but no partitions shows
http://forum.xda-developers.com/lg-g2/general/fix-unbrick-lg-g2-stuck-qualcomm-hs-usb-t2933830
---------- Post added at 09:56 PM ---------- Previous post was at 09:53 PM ----------
This is how i done mine ofcoarse every case is unique if u scroll lower it even tells and pic on how to jump the resistors
THANK YOU SOOOO MUCH I got it into download mode. You don't know how grateful I am to you for your time and patience.
Hi Guys,
Can you point me where the test point is of F460 ? I need to put it in qhsusb 9008
Have you found a solution ?
I have the same problem, I don't know where the point is !
Thanks !
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
This is for most if not all models
hope someone will help us with this, got same issue with my g3 f460l
---------- Post added at 10:41 PM ---------- Previous post was at 10:39 PM ----------
TheMadScientist420 said:
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
This is for most if not all models
Click to expand...
Click to collapse
but the f460 board is not same as the g3..
arl8488 said:
hope someone will help us with this, got same issue with my g3 f460l
---------- Post added at 10:41 PM ---------- Previous post was at 10:39 PM ----------
but the f460 board is not same as the g3..
Click to expand...
Click to collapse
ididnt know that i aint had a g3 in quite some time.
is ure device already picked up by pc in qloader9008 mode or nothing at all
check device manager if its in qloader u can skip the test point step
TheMadScientist420 said:
ididnt know that i aint had a g3 in quite some time.
is ure device already picked up by pc in qloader9008 mode or nothing at all
check device manager if its in qloader u can skip the test point step
Click to expand...
Click to collapse
That is my problem l, because it keeps on rebooting and the pc is not detecting it..not even a sound or qloader in device manager..will you help me with this?:crying::crying:
arl8488 said:
That is my problem l, because it keeps on rebooting and the pc is not detecting it..not even a sound or qloader in device manager..will you help me with this?:crying::crying:
Click to expand...
Click to collapse
Man i wish i could. Need the test point bad. Ima look and see if i can find somethin
---------- Post added at 08:28 PM ---------- Previous post was at 08:21 PM ----------
So far from what ive read if its not picking up qloader. Either motherboard replace.ent or jtag. Now theres a chance the batter is to dead cause i know the g2 wont charge in qloader mode hard bricked. I had to buy a fastboot cable for a kidle fire which is soldered diffrently than a usb and a otg cable. And it force charges while hard bricked. Worked on my hard bricked dead kindle and my g2 which the bat died in while hard bricked. But i had to do the ground point to get it in qloader after it charged. That also might be ure issue. Is it wont pick up cause the bat is dead. But from what im reading. This is the cat 6 rite. That sofar these are the only ideas i have
---------- Post added at 08:33 PM ---------- Previous post was at 08:28 PM ----------
arl8488 said:
That is my problem l, because it keeps on rebooting and the pc is not detecting it..not even a sound or qloader in device manager..will you help me with this?:crying::crying:
Click to expand...
Click to collapse
http://forum.xda-developers.com/lg-g3/general/how-to-unbrick-hardbrick-g3-cat-6-f460-t3489860
Try this.
TheMadScientist420 said:
ididnt know that i aint had a g3 in quite some time.
is ure device already picked up by pc in qloader9008 mode or nothing at all
check device manager if its in qloader u can skip the test point step
Click to expand...
Click to collapse
my computer is not picking up my g3 cat6 i dont know why, its just rebooting to lg logo..connecting usb cable not even a sound or new/unknown device on device manager...done changing the battery but still no luck..
---------- Post added at 04:48 PM ---------- Previous post was at 04:41 PM ----------
TheMadScientist420 said:
ididnt know that i aint had a g3 in quite some time.
is ure device already picked up by pc in qloader9008 mode or nothing at all
check device manager if its in qloader u can skip the test point step
Click to expand...
Click to collapse
thanks bro..yeah its really nothing at all, connecting usb cable on it not even a sound from the pc, no new/unknown device on the device manager.. do you think i we have test points with cat6? i looked the tot test points for g3 and i saw the board setup is not the same with the g3 cat6... hope someone will show how to test point..
arl8488 said:
my computer is not picking up my g3 cat6 i dont know why, its just rebooting to lg logo..connecting usb cable not even a sound or new/unknown device on device manager...done changing the battery but still no luck..
---------- Post added at 04:48 PM ---------- Previous post was at 04:41 PM ----------
thanks bro..yeah its really nothing at all, connecting usb cable on it not even a sound from the pc, no new/unknown device on the device manager.. do you think i we have test points with cat6? i looked the tot test points for g3 and i saw the board setup is not the same with the g3 cat6... hope someone will show how to test point..
Click to expand...
Click to collapse
not having the device for myself and not doing it for myself i would never tell anyone to try it wrong point grounded out and fry the motherboard
TheMadScientist420 said:
not having the device for myself and not doing it for myself i would never tell anyone to try it wrong point grounded out and fry the motherboard
Click to expand...
Click to collapse
yeah..thats why i am researching for the right way to test point the device..i've seen video in youtube with same issue but did not show the procedure, hoping someone experienced this kind of issue and teach us how to fix..
Hello everyone,
I have got a Zenfone 2 (Z00AD) but it doesn't start.
When i turn on the phone, it vibrates 1 long and 1 short, but nothing happens.
I tried the xFSTK method with the correct files, options and flag values but after the process but only a white USB logo appears on the screen.
I repeated the xFSTK process 30 times, but nothing...
Please help me!
yes i have same problem. i have tried everything sadly.....is there anybody to help us...please....
---------- Post added at 08:10 PM ---------- Previous post was at 08:09 PM ----------
just give us a hand
---------- Post added at 08:27 PM ---------- Previous post was at 08:10 PM ----------
i am trying for 6 hours on pc. i could not find any solution
I was trying to flash Android 10 on my LG G7 Thin Q (LG-G710PM) with the LGUP cmd method, but I must have flashed an incompatible KDZ file or something because the process bricked my phone.
It won't boot no matter what I do, though my PC does recognize the device still (It recognizes it under other devices as QUSB_BULK_CID:0402_SN:333F0715)
I don't know what to do, and it would be a big shame if I truly just ended up killing my phone.
Update: I've downloaded Qualcom USB Drivers onto my computer and now the device is being recognized as Qualcomm HS-USB QDLoader 9008
https://forum.xda-developers.com/lg...to-recover-hardbrick-9008-mode-boxes-t4052841
---------- Post added at 04:00 PM ---------- Previous post was at 03:58 PM ----------
Still download mode working?
Baijoosharma said:
https://forum.xda-developers.com/lg...to-recover-hardbrick-9008-mode-boxes-t4052841
---------- Post added at 04:00 PM ---------- Previous post was at 03:58 PM ----------
Still download mode working?
Click to expand...
Click to collapse
No. Download mode does not work. The phone is unresponsive.
I've already tried the method in the link in your reply and it isn't working
Reyago said:
No. Download mode does not work. The phone is unresponsive.
I've already tried the method in the link in your reply and it isn't working
Click to expand...
Click to collapse
What is the problem with this method? Where you stuck? Any errors?