OK so I flash grola ROM and ended up panicking when I noticed recovery or download mode didn't work. So I followed the guide using Linux to flash partitions, but where I made a mistake is with the recovery. I renamed the wrong recovery which was the stock recovery which I flashed and now I'm stuck in qhsusb_bulk. So now I been trying to force the 9006 mode so I can use lgflashtool
This is what u want when hook up on pc as long as u get a bunch of removable drives ure good I don't know the exact like but look up g2 now unbrickable there is a way to do it from windows have had to do mine multiple time if it don't connect as a bunch of removable drives you have to slightly disassemble the phone jump two resistors withe the bat disconnect ed I'll try to find the link
---------- Post added at 12:07 PM ---------- Previous post was at 12:04 PM ----------
Further more your not ready for kg flash tool just yet you have to fix the partitions first look for ure. Update zva zvc zvd with ever one your gonna tot. Back to there also is a blank partition table for download some where
---------- Post added at 12:12 PM ---------- Previous post was at 12:07 PM ----------
http://forum.xda-developers.com/lg-...m.xda-developers.com/showthread.php?t=2582142
---------- Post added at 12:12 PM ---------- Previous post was at 12:12 PM ----------
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-
http://forum.xda-developers.com/showthread.php?t=2582142
---------- Post added at 12:17 PM ---------- Previous post was at 12:12 PM ----------
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
The last 2 links
OK I've tried these and I can't seem to short the resistors. It comes up as qhsusb_bulk but no partitions shows.
Make sure it's the outside of the resistors I had the Same problom I'm just trying to think back and see what fixed it
---------- Post added at 07:07 PM ---------- Previous post was at 07:05 PM ----------
See when I done mine about 6 months ago I accident ly flashed a g3 recovery
---------- Post added at 07:20 PM ---------- Previous post was at 07:07 PM ----------
https://www.youtube.com/watch?v=_d5b_osUTug
---------- Post added at 07:27 PM ---------- Previous post was at 07:20 PM ----------
Can be done in windows and check device man see what mode it is picking phone up as it took me a million trys plug it in hold the power button for like 8 seconds if ure in a dark room u can see the sscreen cycle i didnt use linux
Look for xda user tungkick he guided me throught mine he if im not mstaken he wrote the files when u repartion u need the partitions from ure tot zip also look for tot extracter
---------- Post added at 07:30 PM ---------- Previous post was at 07:27 PM ----------
I was
I can't seem to see the video on how to short the resistors
I have everything like my unbrick files, I just can't seem to get the partitions to show up. It shows qhsusb_bulk in device manager but no partitions
Thats the right mode
It is.? OK so how do I get the partitions to show in disk management. I wish I had some type of hardware knowledge
Thanks for helping me by the way. Also I see that I'm in 9008 mode but no partitions shows
http://forum.xda-developers.com/lg-g2/general/fix-unbrick-lg-g2-stuck-qualcomm-hs-usb-t2933830
---------- Post added at 09:56 PM ---------- Previous post was at 09:53 PM ----------
This is how i done mine ofcoarse every case is unique if u scroll lower it even tells and pic on how to jump the resistors
THANK YOU SOOOO MUCH I got it into download mode. You don't know how grateful I am to you for your time and patience.
Related
Lg G3 D855 hard brick need help
Hi guys my phone has bricked so i tried to do the tot method and is almost worked but i saw on the screen that blue background and a white text "Reset factory status" something like that...
and the number "2" in a big so i checked what the hell is that number 2 means and it means that is not good becouse to finish the hard reset i need to see the same blue backgroud but with the number "3" thats means that every thing is ok .
so after that i tried to flash it again on Lg Flash Tool and it take 14 seconds to tell me that "Cant Change To Download Mode 00000064" and every thing is ok my phone did changed to the download mode but on the program it says that it cant change to download mode ?:
some one can help me please i will appriciate that !
Q. When I tried to follow the above method I get a "Can't change to download mode" error referencing "Error 00000064"
A. I experienced this several times when attempting to un-root using a USB 3.0 port. Connect the phone using a USB 2.0 port preferably connected directly to the computer - and make sure the phone is already in download mode. Occasional you may need to unplug the USB cable from your phone for a couple of seconds and reconnect to get the process started.
CR : http://forum.xda-developers.com/att-lg-g3/general/unroot-return-to-factory-stock-att-lg-g3-t2820827
Duckscreen said:
Q. When I tried to follow the above method I get a "Can't change to download mode" error referencing "Error 00000064"
A. I experienced this several times when attempting to un-root using a USB 3.0 port. Connect the phone using a USB 2.0 port preferably connected directly to the computer - and make sure the phone is already in download mode. Occasional you may need to unplug the USB cable from your phone for a couple of seconds and reconnect to get the process started.
CR : http://forum.xda-developers.com/att-lg-g3/general/unroot-return-to-factory-stock-att-lg-g3-t2820827
Click to expand...
Click to collapse
what do you mean when you said connect to USB 2.0 port ? how i do that ?
http://forum.xda-developers.com/lg-g3/general/unbrick-lg-g3-qhsusbbulk-qualcomm-9008-t3072091
Read in its entirty
---------- Post added at 07:25 AM ---------- Previous post was at 07:09 AM ----------
Sorry answer posted in wrong thread
---------- Post added at 07:26 AM ---------- Previous post was at 07:25 AM ----------
This is for a hard brick
---------- Post added at 07:27 AM ---------- Previous post was at 07:26 AM ----------
Usb 2.0 is a standard port like my computers 3.0 is on the back
---------- Post added at 07:31 AM ---------- Previous post was at 07:27 AM ----------
When you're stuck at the factory reset status 2 page, you should go through the entire guide linked before. then at Step 7, instead of having the LG FlashTool set to 'Upgrade DL', you should change it to 'Board DL'.
You'll see an AAT screen(you will know what this is when you see it) on your LG G3. Click OK here, even though it says not to, then you press and hold the power button so you can reboot normally
https://m.reddit.com/r/LGG3/comments/2obqre/please_help_phone_stuck_in_factory_reset_status_2/
This is the correct link
TheMadScientist420 said:
http://forum.xda-developers.com/lg-g3/general/unbrick-lg-g3-qhsusbbulk-qualcomm-9008-t3072091
Read in its entirty
---------- Post added at 07:25 AM ---------- Previous post was at 07:09 AM ----------
Sorry answer posted in wrong thread
---------- Post added at 07:26 AM ---------- Previous post was at 07:25 AM ----------
This is for a hard brick
---------- Post added at 07:27 AM ---------- Previous post was at 07:26 AM ----------
Usb 2.0 is a standard port like my computers 3.0 is on the back
---------- Post added at 07:31 AM ---------- Previous post was at 07:27 AM ----------
When you're stuck at the factory reset status 2 page, you should go through the entire guide linked before. then at Step 7, instead of having the LG FlashTool set to 'Upgrade DL', you should change it to 'Board DL'.
You'll see an AAT screen(you will know what this is when you see it) on your LG G3. Click OK here, even though it says not to, then you press and hold the power button so you can reboot normally
https://m.reddit.com/r/LGG3/comments/2obqre/please_help_phone_stuck_in_factory_reset_status_2/
This is the correct link
Click to expand...
Click to collapse
hi dude im going by his tips step by step and i hava changed to Board DL and it still tells me that cant change to download mode after 15 seconds and i didnt saw nothing that looks like aat screen :? could you contact me on facebook or skype to help me please ?
Dont have fb or skype
---------- Post added at 08:17 AM ---------- Previous post was at 08:16 AM ----------
Those guides are straight from the source i just passed them along i no nothing more than what they say
---------- Post added at 08:21 AM ---------- Previous post was at 08:17 AM ----------
Try diffrent usb cords diffrent ports theres been times it takes me 10 15 tries when it say cant switch just unplug and plug back in dont restart the proscess. Ofcoarse make sure ur com is set to port 41 in device man im sure it is cause ure makin it to no download switch but seriously follow that guide and like i said try diffrwnt cords my stock lg cord dosnt work rite i have like 5 or 6 differ usb cord but only 2 of them work for tot restore somethin bout how theyre wired
---------- Post added at 08:24 AM ---------- Previous post was at 08:21 AM ----------
Bue the way this isnt in my opinion a hard brick just so u know for future refrence woulda got more hits people are scared to even read stuff about hard bricks cause then theybthink itll happen to them this is just a set back last time i toted mine it took me like 2 hours cause of cables and usb ports like i said keep tryin
---------- Post added at 08:26 AM ---------- Previous post was at 08:24 AM ----------
Im heading to work rite now ill check back in in about about a hour to see whats up
Hi folks updated to latest rom using twrp and all great but was messing in advanced settings and deleted system files, now stuck on white logo and cant connect with adb, any ideas greatly appreciated, i see there is an image for a FTV2 is there anything for the 1
Hi folks can anyone help please
Do you have custom boot recovery?
---------- Post added at 07:32 PM ---------- Previous post was at 07:30 PM ----------
youll probaby need a-a usb cable and run the unbrick image
While entering fast boot mode it shows secure phone....Now my phone is dead pls give me a solution
get motherboard replacement from service center
if you are in warranty then it will be free of cost
if not then it will cost around Rs.3000
---------- Post added at 07:13 PM ---------- Previous post was at 07:13 PM ----------
[email protected] said:
While entering fast boot mode it shows secure phone....Now my phone is dead pls give me a solution
Click to expand...
Click to collapse
......
Hello everyone,
I have got a Zenfone 2 (Z00AD) but it doesn't start.
When i turn on the phone, it vibrates 1 long and 1 short, but nothing happens.
I tried the xFSTK method with the correct files, options and flag values but after the process but only a white USB logo appears on the screen.
I repeated the xFSTK process 30 times, but nothing...
Please help me!
yes i have same problem. i have tried everything sadly.....is there anybody to help us...please....
---------- Post added at 08:10 PM ---------- Previous post was at 08:09 PM ----------
just give us a hand
---------- Post added at 08:27 PM ---------- Previous post was at 08:10 PM ----------
i am trying for 6 hours on pc. i could not find any solution
I was trying to flash Android 10 on my LG G7 Thin Q (LG-G710PM) with the LGUP cmd method, but I must have flashed an incompatible KDZ file or something because the process bricked my phone.
It won't boot no matter what I do, though my PC does recognize the device still (It recognizes it under other devices as QUSB_BULK_CID:0402_SN:333F0715)
I don't know what to do, and it would be a big shame if I truly just ended up killing my phone.
Update: I've downloaded Qualcom USB Drivers onto my computer and now the device is being recognized as Qualcomm HS-USB QDLoader 9008
https://forum.xda-developers.com/lg...to-recover-hardbrick-9008-mode-boxes-t4052841
---------- Post added at 04:00 PM ---------- Previous post was at 03:58 PM ----------
Still download mode working?
Baijoosharma said:
https://forum.xda-developers.com/lg...to-recover-hardbrick-9008-mode-boxes-t4052841
---------- Post added at 04:00 PM ---------- Previous post was at 03:58 PM ----------
Still download mode working?
Click to expand...
Click to collapse
No. Download mode does not work. The phone is unresponsive.
I've already tried the method in the link in your reply and it isn't working
Reyago said:
No. Download mode does not work. The phone is unresponsive.
I've already tried the method in the link in your reply and it isn't working
Click to expand...
Click to collapse
What is the problem with this method? Where you stuck? Any errors?