I was trying to flash Android 10 on my LG G7 Thin Q (LG-G710PM) with the LGUP cmd method, but I must have flashed an incompatible KDZ file or something because the process bricked my phone.
It won't boot no matter what I do, though my PC does recognize the device still (It recognizes it under other devices as QUSB_BULK_CID:0402_SN:333F0715)
I don't know what to do, and it would be a big shame if I truly just ended up killing my phone.
Update: I've downloaded Qualcom USB Drivers onto my computer and now the device is being recognized as Qualcomm HS-USB QDLoader 9008
https://forum.xda-developers.com/lg...to-recover-hardbrick-9008-mode-boxes-t4052841
---------- Post added at 04:00 PM ---------- Previous post was at 03:58 PM ----------
Still download mode working?
Baijoosharma said:
https://forum.xda-developers.com/lg...to-recover-hardbrick-9008-mode-boxes-t4052841
---------- Post added at 04:00 PM ---------- Previous post was at 03:58 PM ----------
Still download mode working?
Click to expand...
Click to collapse
No. Download mode does not work. The phone is unresponsive.
I've already tried the method in the link in your reply and it isn't working
Reyago said:
No. Download mode does not work. The phone is unresponsive.
I've already tried the method in the link in your reply and it isn't working
Click to expand...
Click to collapse
What is the problem with this method? Where you stuck? Any errors?
Related
Like the title states I'm stuck on the splash screen. What makes my problem a little tricky is that I can not access recovery and I can not use odin, because the samsung drivers are not installed and will not install until I plug in a booted samsung phone into my computer to prompt the driver install. So, unless there is a way to install the drivers without plugging in the phone or another way to flash cwm (which i lost on a bad rom flash) I am really screwed. Please any help I can get would be greatly appreciated!!
____________________________________________
update: Sprint ended up just giving me a new phone at no charge! problem solved I guess. thanks for everyone's help
Navigate to where you have the drivers on comp. Open the file and look for the one ending in .exe click it and install manually. That should let your comp see your phone.
---------- Post added at 11:50 AM ---------- Previous post was at 11:48 AM ----------
If you don't have the driver package search Samsung kies download drivers and use above instructions.
Heres a link for the drivers.
---------- Post added at 02:01 PM ---------- Previous post was at 01:58 PM ----------
[/COLOR]Heres a link for the drivers. Make sure to unzip first then install. http://www.mitsdrivers.com/pages_epic-touch-4g-drivers.html#
Happened to me once. Just held down Vol up and Power button for a long time and eventually is was able to load itself.
Hi Guys,
Can you point me where the test point is of F460 ? I need to put it in qhsusb 9008
Have you found a solution ?
I have the same problem, I don't know where the point is !
Thanks !
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
This is for most if not all models
hope someone will help us with this, got same issue with my g3 f460l
---------- Post added at 10:41 PM ---------- Previous post was at 10:39 PM ----------
TheMadScientist420 said:
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
This is for most if not all models
Click to expand...
Click to collapse
but the f460 board is not same as the g3..
arl8488 said:
hope someone will help us with this, got same issue with my g3 f460l
---------- Post added at 10:41 PM ---------- Previous post was at 10:39 PM ----------
but the f460 board is not same as the g3..
Click to expand...
Click to collapse
ididnt know that i aint had a g3 in quite some time.
is ure device already picked up by pc in qloader9008 mode or nothing at all
check device manager if its in qloader u can skip the test point step
TheMadScientist420 said:
ididnt know that i aint had a g3 in quite some time.
is ure device already picked up by pc in qloader9008 mode or nothing at all
check device manager if its in qloader u can skip the test point step
Click to expand...
Click to collapse
That is my problem l, because it keeps on rebooting and the pc is not detecting it..not even a sound or qloader in device manager..will you help me with this?:crying::crying:
arl8488 said:
That is my problem l, because it keeps on rebooting and the pc is not detecting it..not even a sound or qloader in device manager..will you help me with this?:crying::crying:
Click to expand...
Click to collapse
Man i wish i could. Need the test point bad. Ima look and see if i can find somethin
---------- Post added at 08:28 PM ---------- Previous post was at 08:21 PM ----------
So far from what ive read if its not picking up qloader. Either motherboard replace.ent or jtag. Now theres a chance the batter is to dead cause i know the g2 wont charge in qloader mode hard bricked. I had to buy a fastboot cable for a kidle fire which is soldered diffrently than a usb and a otg cable. And it force charges while hard bricked. Worked on my hard bricked dead kindle and my g2 which the bat died in while hard bricked. But i had to do the ground point to get it in qloader after it charged. That also might be ure issue. Is it wont pick up cause the bat is dead. But from what im reading. This is the cat 6 rite. That sofar these are the only ideas i have
---------- Post added at 08:33 PM ---------- Previous post was at 08:28 PM ----------
arl8488 said:
That is my problem l, because it keeps on rebooting and the pc is not detecting it..not even a sound or qloader in device manager..will you help me with this?:crying::crying:
Click to expand...
Click to collapse
http://forum.xda-developers.com/lg-g3/general/how-to-unbrick-hardbrick-g3-cat-6-f460-t3489860
Try this.
TheMadScientist420 said:
ididnt know that i aint had a g3 in quite some time.
is ure device already picked up by pc in qloader9008 mode or nothing at all
check device manager if its in qloader u can skip the test point step
Click to expand...
Click to collapse
my computer is not picking up my g3 cat6 i dont know why, its just rebooting to lg logo..connecting usb cable not even a sound or new/unknown device on device manager...done changing the battery but still no luck..
---------- Post added at 04:48 PM ---------- Previous post was at 04:41 PM ----------
TheMadScientist420 said:
ididnt know that i aint had a g3 in quite some time.
is ure device already picked up by pc in qloader9008 mode or nothing at all
check device manager if its in qloader u can skip the test point step
Click to expand...
Click to collapse
thanks bro..yeah its really nothing at all, connecting usb cable on it not even a sound from the pc, no new/unknown device on the device manager.. do you think i we have test points with cat6? i looked the tot test points for g3 and i saw the board setup is not the same with the g3 cat6... hope someone will show how to test point..
arl8488 said:
my computer is not picking up my g3 cat6 i dont know why, its just rebooting to lg logo..connecting usb cable not even a sound or new/unknown device on device manager...done changing the battery but still no luck..
---------- Post added at 04:48 PM ---------- Previous post was at 04:41 PM ----------
thanks bro..yeah its really nothing at all, connecting usb cable on it not even a sound from the pc, no new/unknown device on the device manager.. do you think i we have test points with cat6? i looked the tot test points for g3 and i saw the board setup is not the same with the g3 cat6... hope someone will show how to test point..
Click to expand...
Click to collapse
not having the device for myself and not doing it for myself i would never tell anyone to try it wrong point grounded out and fry the motherboard
TheMadScientist420 said:
not having the device for myself and not doing it for myself i would never tell anyone to try it wrong point grounded out and fry the motherboard
Click to expand...
Click to collapse
yeah..thats why i am researching for the right way to test point the device..i've seen video in youtube with same issue but did not show the procedure, hoping someone experienced this kind of issue and teach us how to fix..
So, I am a victim of the McAfee killswitch. I rooted my phone, then unlocked bootloader, but I made a mistake and had to flash kdz. For some reason, the kdz i downloaded was locked in mcaffee, so i really struggled but managed to install twrp, and of course root. The phone worked fine for a long time, but then I messed up and got a bootloop. The thing is, my killswitch is engaged now, so I can't just go into TWRP and wipe, or go into download mode. Both locked. And if i try to boot normally I just get the loop... So my questions are: Is there a way to get into TWRP directly (without having to confirm, phone could reboot to recovery just fine). Or just flash kdz, i don't know, anything. ADB shows device offline and sometimes unathorized, fastboot doesn't detect it. LG service said it will only fixed if i replace everything. Any help?
Sounds like you need togoba I to stock using lg flash tool
---------- Post added at 03:13 PM ---------- Previous post was at 03:05 PM ----------
ToRt1sher said:
So, I am a victim of the McAfee killswitch. I rooted my phone, then unlocked bootloader, but I made a mistake and had to flash kdz. For some reason, the kdz i downloaded was locked in mcaffee, so i really struggled but managed to install twrp, and of course root. The phone worked fine for a long time, but then I messed up and got a bootloop. The thing is, my killswitch is engaged now, so I can't just go into TWRP and wipe, or go into download mode. Both locked. And if i try to boot normally I just get the loop... So my questions are: Is there a way to get into TWRP directly (without having to confirm, phone could reboot to recovery just fine). Or just flash kdz, i don't know, anything. ADB shows device offline and sometimes unathorized, fastboot doesn't detect it. LG service said it will only fixed if i replace everything. Any help?
Click to expand...
Click to collapse
Try flashing back to stock rom using lg flashtool
moswald1978 said:
Sounds like you need togoba I to stock using lg flash tool
---------- Post added at 03:13 PM ---------- Previous post was at 03:05 PM ----------
Try flashing back to stock rom using lg flashtool
Click to expand...
Click to collapse
I can't access download mode, so I guess flashtool is not an option.
ToRt1sher said:
I can't access download mode, so I guess flashtool is not an option.
Click to expand...
Click to collapse
Try using the kHz method if your computer will reconize your phone. Use LG flashtool 2014 it will put your phone in download mode for you
---------- Post added at 06:06 PM ---------- Previous post was at 06:05 PM ----------
moswald1978 said:
Try using the kHz method if your computer will reconize your phone. Use LG flashtool 2014 it will put your phone in download mode for you
Click to expand...
Click to collapse
Kdz
How will it put my phone into download mode? If i click start, it says the phone is not connected to the computer. My computer can see the device as ADB device, but only offline or unauthorized.
When I used it my phone was stuck on the LG screen. Flashtool found my device and started the upgrade then it booted my phone into download mode
That does not work for me.. The program is stuck at 60% and telling me phone is not connected.
The only other option I can think of would be to a hard factory reset. Make sure your phone is off then hold down power and volume down together when the LG logo appears keep holding them. It should take you to that menu
I already said I can't go into recovery like that, because there is a killswitch activated on my phone.
ToRt1sher said:
So, I am a victim of the McAfee killswitch. I rooted my phone, then unlocked bootloader, but I made a mistake and had to flash kdz. For some reason, the kdz i downloaded was locked in mcaffee, so i really struggled but managed to install twrp, and of course root. The phone worked fine for a long time, but then I messed up and got a bootloop. The thing is, my killswitch is engaged now, so I can't just go into TWRP and wipe, or go into download mode. Both locked. And if i try to boot normally I just get the loop... So my questions are: Is there a way to get into TWRP directly (without having to confirm, phone could reboot to recovery just fine). Or just flash kdz, i don't know, anything. ADB shows device offline and sometimes unathorized, fastboot doesn't detect it. LG service said it will only fixed if i replace everything. Any help?
Click to expand...
Click to collapse
I guess it will be very hard to flash KDZ or TOT cause you need to put your phone to download mode or need to connect ADB. following the post.
ToRt1sher said:
I already said I can't go into recovery like that, because there is a killswitch activated on my phone.
Click to expand...
Click to collapse
did you ever find a solution ?
x000x said:
did you ever find a solution ?
Click to expand...
Click to collapse
No, that's why I asked for help here.
Any news guys? Did somebody find a solution to the killswitch problem?
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359 try this follow step bye step works on most models
---------- Post added at 10:10 AM ---------- Previous post was at 10:04 AM ----------
This is a cure all for just about all bricks
---------- Post added at 10:50 AM ---------- Previous post was at 10:10 AM ----------
ToRt1sher said:
No, that's why I asked for help here.
Click to expand...
Click to collapse
It may seem hard but its really not
TheMadScientist420 said:
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359 try this follow step bye step works on most models
---------- Post added at 10:10 AM ---------- Previous post was at 10:04 AM ----------
This is a cure all for just about all bricks
---------- Post added at 10:50 AM ---------- Previous post was at 10:10 AM ----------
It may seem hard but its really not
Click to expand...
Click to collapse
You saved me, thanks a lot!!!
hi guys ,, please i need help.. i fflashed a wrong recovery file which made me stuck in bootloop.. i cant enter download mode or recovery mode. phone cannot be detected when connected to pc. i guess mmy bootloader is damaged .......
can it be fixed???/
Are you able to enter factory reset
no..... it i stucl at bootloop...no download mode and recovery mode
Qualcom usb bulk mode i dont know the method but thats about the only way i done the same thing on my g2
---------- Post added at 08:17 PM ---------- Previous post was at 08:12 PM ----------
http://forum.xda-developers.com/lg-g3/general/fix-unbrick-lg-g3-stuck-qualcomm-hs-usb-t2933853
Lg G3 D855 hard brick need help
Hi guys my phone has bricked so i tried to do the tot method and is almost worked but i saw on the screen that blue background and a white text "Reset factory status" something like that...
and the number "2" in a big so i checked what the hell is that number 2 means and it means that is not good becouse to finish the hard reset i need to see the same blue backgroud but with the number "3" thats means that every thing is ok .
so after that i tried to flash it again on Lg Flash Tool and it take 14 seconds to tell me that "Cant Change To Download Mode 00000064" and every thing is ok my phone did changed to the download mode but on the program it says that it cant change to download mode ?:
some one can help me please i will appriciate that !
Q. When I tried to follow the above method I get a "Can't change to download mode" error referencing "Error 00000064"
A. I experienced this several times when attempting to un-root using a USB 3.0 port. Connect the phone using a USB 2.0 port preferably connected directly to the computer - and make sure the phone is already in download mode. Occasional you may need to unplug the USB cable from your phone for a couple of seconds and reconnect to get the process started.
CR : http://forum.xda-developers.com/att-lg-g3/general/unroot-return-to-factory-stock-att-lg-g3-t2820827
Duckscreen said:
Q. When I tried to follow the above method I get a "Can't change to download mode" error referencing "Error 00000064"
A. I experienced this several times when attempting to un-root using a USB 3.0 port. Connect the phone using a USB 2.0 port preferably connected directly to the computer - and make sure the phone is already in download mode. Occasional you may need to unplug the USB cable from your phone for a couple of seconds and reconnect to get the process started.
CR : http://forum.xda-developers.com/att-lg-g3/general/unroot-return-to-factory-stock-att-lg-g3-t2820827
Click to expand...
Click to collapse
what do you mean when you said connect to USB 2.0 port ? how i do that ?
http://forum.xda-developers.com/lg-g3/general/unbrick-lg-g3-qhsusbbulk-qualcomm-9008-t3072091
Read in its entirty
---------- Post added at 07:25 AM ---------- Previous post was at 07:09 AM ----------
Sorry answer posted in wrong thread
---------- Post added at 07:26 AM ---------- Previous post was at 07:25 AM ----------
This is for a hard brick
---------- Post added at 07:27 AM ---------- Previous post was at 07:26 AM ----------
Usb 2.0 is a standard port like my computers 3.0 is on the back
---------- Post added at 07:31 AM ---------- Previous post was at 07:27 AM ----------
When you're stuck at the factory reset status 2 page, you should go through the entire guide linked before. then at Step 7, instead of having the LG FlashTool set to 'Upgrade DL', you should change it to 'Board DL'.
You'll see an AAT screen(you will know what this is when you see it) on your LG G3. Click OK here, even though it says not to, then you press and hold the power button so you can reboot normally
https://m.reddit.com/r/LGG3/comments/2obqre/please_help_phone_stuck_in_factory_reset_status_2/
This is the correct link
TheMadScientist420 said:
http://forum.xda-developers.com/lg-g3/general/unbrick-lg-g3-qhsusbbulk-qualcomm-9008-t3072091
Read in its entirty
---------- Post added at 07:25 AM ---------- Previous post was at 07:09 AM ----------
Sorry answer posted in wrong thread
---------- Post added at 07:26 AM ---------- Previous post was at 07:25 AM ----------
This is for a hard brick
---------- Post added at 07:27 AM ---------- Previous post was at 07:26 AM ----------
Usb 2.0 is a standard port like my computers 3.0 is on the back
---------- Post added at 07:31 AM ---------- Previous post was at 07:27 AM ----------
When you're stuck at the factory reset status 2 page, you should go through the entire guide linked before. then at Step 7, instead of having the LG FlashTool set to 'Upgrade DL', you should change it to 'Board DL'.
You'll see an AAT screen(you will know what this is when you see it) on your LG G3. Click OK here, even though it says not to, then you press and hold the power button so you can reboot normally
https://m.reddit.com/r/LGG3/comments/2obqre/please_help_phone_stuck_in_factory_reset_status_2/
This is the correct link
Click to expand...
Click to collapse
hi dude im going by his tips step by step and i hava changed to Board DL and it still tells me that cant change to download mode after 15 seconds and i didnt saw nothing that looks like aat screen :? could you contact me on facebook or skype to help me please ?
Dont have fb or skype
---------- Post added at 08:17 AM ---------- Previous post was at 08:16 AM ----------
Those guides are straight from the source i just passed them along i no nothing more than what they say
---------- Post added at 08:21 AM ---------- Previous post was at 08:17 AM ----------
Try diffrent usb cords diffrent ports theres been times it takes me 10 15 tries when it say cant switch just unplug and plug back in dont restart the proscess. Ofcoarse make sure ur com is set to port 41 in device man im sure it is cause ure makin it to no download switch but seriously follow that guide and like i said try diffrwnt cords my stock lg cord dosnt work rite i have like 5 or 6 differ usb cord but only 2 of them work for tot restore somethin bout how theyre wired
---------- Post added at 08:24 AM ---------- Previous post was at 08:21 AM ----------
Bue the way this isnt in my opinion a hard brick just so u know for future refrence woulda got more hits people are scared to even read stuff about hard bricks cause then theybthink itll happen to them this is just a set back last time i toted mine it took me like 2 hours cause of cables and usb ports like i said keep tryin
---------- Post added at 08:26 AM ---------- Previous post was at 08:24 AM ----------
Im heading to work rite now ill check back in in about about a hour to see whats up