I think my Phone is hardbricked?! - Galaxy S 4 Mini Q&A, Help & Troubleshooting

Hey there
Let me tell what happened...
A few days ago i got my Cell Phone back from the Cops, they had taken it to save proofs for a crime i didnt do and i had to take it back from the Department.
Now i gave my autogram and got it back but it won´t turn on
I cannot enter CMW Recovery, neither Download mode
Arrived at home i found out that it connects to the PC and answers to me that i need a QHUSB_DLOAD Driver... so i got this and i read in some Forum that i need to geht QPST...
so now i have qpst and the driver so its identified as Com9 on my computer.... but at this point i don´t have any idea what to do.... Someone in here who had the Same Problem or someone in here who can help me?
The Phone is an Samsung Galaxy S4 Mini Serranoltexx GT-1595
Please help me
Greets

Any Ideas? Please!
Now i downloaded an Debrick Image tryin to fix my phone and wrote it with Win32DiskImager on my SDcard (16gb)
put it into my Smartphone and pressed the Power button but nothing happened....
Whats the Cure for this? i´m loosing all my nerves
May Somebody help me?

Related

help needed / auto restarting

hello!
Can anyone help me with this:
after 5 or 10 minutes, or even at the splash screen, my device automatically restarts and does it for several times.
When i try to put it into bootloader mode i see usb,..... but only for a minute. after that it goes out of bootloader mode and starts the OS again...
So i'm a bit worried that when i flash it, the bootloader mode will go out and the device will try to restart.
Any known sollutions to this problem? Any help would be appreciated!!
ps: no answers in the wiki nor in the forum.
thanks in advance to your replies!!!!!
I think your battery is given up or you have bad connection so that you dont get enough power.
Try first to clean the battery and device connections(best to use contact spray for PCB boards) if doesnt help then you need to have new battery
Thanks for your reply.
I just got it back 2 weeks ago and they installed a new board in it... i made them send it back and fix it (i blamed them)
they also putted french rom and AZERTY keyboard in it so they can fix that to (i had englis OS and Qwerty).
Thx for your post, i appreciate it!
Restarting Problem - PLEASE HELP!!!
Hi
I have an Orange SPV m5000 that I rely on for to carry my contact address book and send text messages (I know other phones would do it but I really like my Uni).
Recently mine has decided that it's going restart itself every few seconds. I have no idea why it's doing this, but the shop I bought it from are not helping me at all.
I've hard reset the device and that hasn't worked so if anyone has any ideas then please let me know, or if you know of anywhere I can send it to be repaired (I'm in the UK).
Thanks in advance
Nick

Cash via PAYPAL if you help fix hp6815 deadboot with jtag !! uk.

Hi all,
I have a hp 6815 and i am desperate to fix it.
I had upgraded ROM a few times with sd card fine, then i went to change the rom again and i think i didn't wait long enough and messed up the booting. But problem now is it won't go into to boot loader mode at all, it is totally black with no power.
It has an orange light when charging, so i think the battery is ok.
But i am sure the boot loader is corrupted and it needs restoring with jtag.
I have connected it up with some make shift wires and entered the jflashmm what i have heard other people fix their dead boots. It would ask me first question what i answer then it goes to next question. What is binfile name, i think ! I put in the EBO etc and have tried various ways but it won't register any. I just need help with the commands. I have already copy and renamed file for EBO_a.nb0. I just need a little help, if i fix this with help i swear i will send the person who helps at least 20 uk pounds through paypal, I would be overjoyed !!
So someone with good jtag knowledge and ipaqs would be great.
Also another thing is i'm not sure what the ntrst connection is to on jtag. Is it connected to anything at all ? As the diagram on dead boots shows this but not seeming connected, am i right ?
Thankyou in advance
Please someone give a little help.
Hello,
Please someone help with this. Just need to know about jtag[ntrst] and all the commands i need to input to fix boatloader from the 1st to last.
If i get this info and fix it i will either pay some money or give my TUROK game to you what is boxed with key and manual ready for multiplayer action, atm i'm into gta4 so don't play turok anymore. But this is a solid unreal engine 3 game.
FRAGEYE said:
give my TUROK game to you
Click to expand...
Click to collapse
SWEET!!!!
I guess ill try to help you,
Im going to ask you to try to "hard reset" your device...
I already googled it, and i found this Youtube Video
Tell me if that does anything....
If you still need assistance, then Private message me.
Thankyou, believe me though i have tried everything, no power only when charging. I have to fix this with jtag. Really all i need is commands from 1st to last.
Whoever can help with the right commands gets a game. Remember it is a ipaq 6815.
Does anyone know anyone with the knowledge.
I had before upgraded rom a few times with no worries and bricked it before but not where it has no boatloader.
I am pretty handy with flashing but need help with this.
Please people help a kind soul.
Thankyou
Someone must know about jtag.

lost the SDcard, phone cant start

hi guy,
sorry that i bother you guy but i really need to fix the phone.
i got an AT&T tilt that has warm donut on. but then i switch to dif phone and take the SD card with it. but now i lost the phone so the SDcard is gone.
and i try to start the tilt up again and it wont load, it stuck at the black screen with bunch of code on it. and i try to connect it to pc with window mobile device center but it not working either. so can you guy help me out?
BTW, happy New Year guy!!!
ps: i'll upload the picture later if you guy need.
post the code or the image
i said something like "android cant access tty"
Probably you need to reinstall and a new sdcard.
can you show me how to do that?
Follow the step by step guide in atools.
im really sorry but i couldnt find the thread
can you give the link to it please. THx
Just put ur phone in boot loader mode by Pressing Power+camera+reset button together, Once u are in boot loader tri screen install any windows rom and ur phone will be working all again..
thx guy
my phone is working again

Galaxy Wonder Brick Help Me Pleace :(

hello everyone my galaxy wonder don't turn on and i can't enter in download mode and recovery mode i try all possible metod...but nothing...
Someone can help me pleace..?
Sorry for my bad english...
can you please tell us.. what did you do before to your phone?
details please?
Sent from my GT-I8150 using xda
Seems like you had accidentally hard-bricked your phone, if that really happen the only solution is send back to Samsung Service Centre as you will have to replace your mainboard, anyway please tell a little bit more details so we can confirm what had happened to your phone
MyDeSTiNaTe said:
Seems like you had accidentally hard-bricked your phone, if that really happen the only solution is send back to Samsung Service Centre as you will have to replace your mainboard, anyway please tell a little bit more details so we can confirm what had happened to your phone
Click to expand...
Click to collapse
i flesh a recovery maybe this is the problem so i can't boot the phone so i can buy a jig dongle to try by myself to work the phone or assisstence...
flash, what steps had you done?
it should be safe..

HardBrick Samsung Galaxy Note 2 need help!! ASAP

My Galaxy Note 2 unable to start. It's completely blackscreen (not out of battery). No matter i press power nothing appear not even a small light.
Before this happy I phone got upgrade issue. After fixed, I tried to flash kernel "philz_touch_6.07.9-n7000.tar.md5" through Odin but stuck at "NAND writing start". I waited almost a hour nothing happen so I take of the cable (repeatedly did that many time) then it become like that.
I hope it can be fix.
I am seriously scared ****less right now.
*Phone is now blackscreen just like dead battery phone. Nothing happen when I press POWER BUTTON. However, I connect to PC sometime i appear "Window not recognize USB connection". *
Pls someone help me
*I posted for help at XDA assist and someone asked to posted in Link help thread so I hope now I post at the right place. If still not pls give me a link to that thread because I still new here.*
[sorry for make mistake without realize it]

Categories

Resources