lost the SDcard, phone cant start - Tilt, TyTN II, MDA Vario III Android Development

hi guy,
sorry that i bother you guy but i really need to fix the phone.
i got an AT&T tilt that has warm donut on. but then i switch to dif phone and take the SD card with it. but now i lost the phone so the SDcard is gone.
and i try to start the tilt up again and it wont load, it stuck at the black screen with bunch of code on it. and i try to connect it to pc with window mobile device center but it not working either. so can you guy help me out?
BTW, happy New Year guy!!!
ps: i'll upload the picture later if you guy need.

post the code or the image

i said something like "android cant access tty"

Probably you need to reinstall and a new sdcard.

can you show me how to do that?

Follow the step by step guide in atools.

im really sorry but i couldnt find the thread
can you give the link to it please. THx

Just put ur phone in boot loader mode by Pressing Power+camera+reset button together, Once u are in boot loader tri screen install any windows rom and ur phone will be working all again..

thx guy
my phone is working again

Related

HTC desire stuck in bootscreen. wont boot up!

Hey all!
I have an HTC desire and i installed the nextsense ROM 4.0 official OTA update 2.2. I also formatted my memory card. after doing all this, my phone won't boot up! It is stuck in the boot screen always! please help me out here!
Any help will be deeply appreciated!
sweetheater said:
Hey all!
I have an HTC desire and i installed the nextsense ROM 4.0 official OTA update 2.2. I also formatted my memory card. after doing all this, my phone won't boot up! It is stuck in the boot screen always! please help me out here!
Click to expand...
Click to collapse
Stuck in a bootloop? Remove the battery. Go into the recovery, perform a full-wipe and flash again. If that not helps then boot youre phone again in the recovery and .....then:
Format youre sdcard from the recovery into swap=0, ext=512, remainder=fat32. You will loose all there is on youre sdcard.
Then after formatting. Turn off the phone. Take out the sdcard and copy the rom to youre sdcard. Put it back in the phone. Start youre phone in the recovery and flash the rom.
Thanks for the quick reply.!
The problem is i am unable to login to my phone. So how will i be able to flash the phone? only if i log in can i use rom manager isnt it? I am a total newbie at this. I would really appreciate it if you could explain this in detail to me!
thanks!
as I know power button with volume down together then wait then use volume down
to highlight recovery then power to enter.
It is explained in the first post of thus forum.
Hold down the back key while pushing the power button.
You will get a menu
Select Bootloader (by pressing power button)
Then wait for 10 seconds on the next menu
Scrol to Recovery with the volume-down button
Then you'll wait ten seconds and get a black screen with red traingle
now connect your phone to the pc with usb
start a adb recovery on the pc (for this you must have a recovery on the pc installed as well as Android SDK) in my case I just run the file recovery-windows.bat
Then you'll get a menu on your phone wit a lot of options, you can even select Ms-usb toggle after wich you can acces your sd card.
I am not a developer but think this is quite it. Download links are all in teh first thread of this forum.
Could you tell me if this would work?
I'll first wipe the phone, including the cache.
Then I'll copy paste the zip file of the Nextsense rom onto an sd card from my PC, insert into my phone, go to recovery mode, go to the sdcard-update.zip menu, and select the nextsense zip file.
Will that work?
Please help me out. and cheers to all u guys who took the trouble to reply so quickly. thanks..
I finally got it to work. All i did was I went into the recovery console, selected factory reset. and it got alright. Only problem is that i think my sd card got busted in the process. No idea what happened to it. It is not even getting detected by my laptop. I guess i ll have to get a new one. Thanks a ton to all the xda guys for helping me out. this forum is really kickass! I shall definitely return to xda to get help on further issues!
reformat your SD card , that should fix it !
Thanks! yeah, formatting the sdcard fixed it. Finally working properly now..
HTC desire stuck in bootscreen
I have the same problem with my desire. While loading a ROM with ROM manager the phone rebooted and started to install the ROM. But while it was installing it i error message came up and the phone froze. And after that it get stuck at the bootscreen. I've read the posts written earlier about this problem, but nothing works.
When I push volume down + power on the phone should think for a second and then show green texts about the SD card etc, but when this message shows it says it can't find anything on the SD card. And when I enter fastboot -> bootloader, it just throws me back to the home menu.. any ideas what to do?
you have to use recovery option in the bootloader
Unless you pushed the NewSense ROM via ADB you're most likely going to get a bootloop. After reading statements in the flashable versions of that ROM, that's what I've gathered: Bootloops.
Either wipe everything and install another ROM or install it the 'old school' way, using ADB.
hi i'm new here,
Currently my Desire totally can't boot up..it stuck on the HTC Welcome screen..
I already remove the battery and restart it..
Also done with the Hard Reset method.
Fyi, my Desire still in stock condition (Android 2.1)
Need some advise regarding this issue.
Thanks in advance guy's =)
Hi I've the same issue as biskut here. The only deference is that have 2.2.
can you please help us noobs
cheers
kurtfimmers said:
It is explained in the first post of thus forum.
Hold down the back key while pushing the power button.
You will get a menu
Select Bootloader (by pressing power button)
Then wait for 10 seconds on the next menu
Scrol to Recovery with the volume-down button
Then you'll wait ten seconds and get a black screen with red traingle
now connect your phone to the pc with usb
start a adb recovery on the pc (for this you must have a recovery on the pc installed as well as Android SDK) in my case I just run the file recovery-windows.bat
Then you'll get a menu on your phone wit a lot of options, you can even select Ms-usb toggle after wich you can acces your sd card.
I am not a developer but think this is quite it. Download links are all in teh first thread of this forum.
Click to expand...
Click to collapse
Where can i get to windows-recovery? I installed SDK but what then?
Similar problem
Hey.
I tried to s-off my phone using alpharev and I had the "waiting for flashing to complete". I tried to check if the proces was running with some commands and it seem as if I managed to restart the proces. I finally gave up and removed the phone. Probably too early because now I can only get bootscreen and Clockwordmod recovery. I'm unable to get further than that and therefore I'm not able to start the s-off proces again.
Can anybody help me?
HrLangholz said:
Hey.
I tried to s-off my phone using alpharev and I had the "waiting for flashing to complete". I tried to check if the proces was running with some commands and it seem as if I managed to restart the proces. I finally gave up and removed the phone. Probably too early because now I can only get bootscreen and Clockwordmod recovery. I'm unable to get further than that and therefore I'm not able to start the s-off proces again.
Can anybody help me?
Click to expand...
Click to collapse
my guide. read it.
Hello guys I was experimenting with my phone HTC Desire and tryed to setup Chainfire 3D for games so first what I did was installation of CF3D drivers unfortunately after reboting my phone never stand up it stack at white bootscreen and thats it...
full wipe didnt help ,new room didnt help ,new other room didnt help I give up my phon let me get in to recovery menu and Hboot menu only now my phone is a veggie...
if someone know solution for this problem please post it here to help me rescue my phone...
Flashing a new rom didn't help? Are you sure you wiped everything? Does it boot if you pull out the sd-card?
abaaaabbbb63 said:
Flashing a new rom didn't help? Are you sure you wiped everything? Does it boot if you pull out the sd-card?
Click to expand...
Click to collapse
just solved it today,after about 20 full wipes,and upload about 30 times diferent custom rooms at least my phone woked up at CM10_VJ_4.1.2_v3.0 ROOM
dunno why my phone stucked on boot screen but now all is ok and I will never install chainfire on this phone

[Q] OMG! Accidentally Formatted system data!

Alright. For starters, xda has been VERY VERY helpful to me over the past few months and I thank everyone who has ever contributed to a question or a discussion I have read. That being said, this is my first post. I watched the newb video, read many forums (both xda and others), google searched, read some more threads, kept reading threads, tried some methods described in some threads, bookmarked some interesting threads for if my phone ever works again, and read some more threads.
I am not saying the answer is not already out there, I am saying I have reached my resourcefulness cap.
Anyway, to the root of the problem: I'm not entirely new to rooting, and am comfortable using recovery and hboot to flash roms. I also had a nandroid backup! for SOME SILLY reason, while in my clockworkmod recovery this morning (maybe slightly due to being half asleep which is why I now recommend being fully awake before entering hboot or recovery or rom manager....etc) I formatted the system on my phone. I THINK.
My phone will now load up to display the bootloader, and go into recovery mode, and flash roms, but when I flash a rom, nothing changes. If I boot my phone up, it will show a notification bar at the top like usual, a stock wallpaper, and that is IT! it will show a message notification and missed call icon since I have them, but the touch screen will not work. The rosie buttons at the bottom do not show up (i.e. phone button or all aps button) no apps appear, no clocks except for in the notification bar... hardkeys have no effect (home button search button menu or back) and volume keys will not work. The lock button will only lock and unlock the screen, not power off or reboot or anything. If plugged in at this point, it is charger only.
So, I can take the micro sd card out and put files on it from my PC via a microsd-usb converter thing...
I have tried putting new roms on the sd and flashing them from recovery, no effect. Tried the RUU_Supersonic_1.32.651.1_Radio_1.39.00.04.26_release_171253.exe program, it always says that my phone has below 30% battery and will not continue (this is not the case as I have two batteries both have been fully charged because the phone will still charge them...)
And I have tried putting PC36IMG.zip files on my sd card to no avail.
I am thinking that the system was wiped because it seems like there is no boot image on the phones internal memory itself. I am currently looking for a way to place a boot image on the sd card to possibly flash it or some sort of update.zip so that my bootloader will ask me to update upon reading it.
Sorry for the long post, and ask any questions I will answer as best I can.
I am posting preemptively to the boot image adventure so that if it does not work, maybe I can have some help finding a solution by then.
I was going to take my evo to the sprint store since it is under warranty but if they go into recovery they will see clockworkmod recovery.
Thanks to all for any form of guidance!
I did just notice in my Bootloader menu (HBOOT-2.10.0001) that it says Supersonice evt2-3 **** S-ON
I don't know how because I thought it was a requirement that it says S-OFF to be rooted and flash roms, but I have definitely flashed roms before and gained su access to applications and such. BUT since it says S-ON would it then be covered by the warranty if it is not rooted?
Thanks again.
I you want to flash a boot image, you can take the boot.img from an RUU for the firmware you are, place it in your adb tools folder, then flash it using the commands:
fastboot flash boot boot.img
fastboot reboot
I'm not sure how to identify what firmware I am. Unless your talking about the Hboot version? and also, I can't place anything in any folder except onto my sd card. I have no access other than that to the phone. On the sd card there are no files except for what I put on there.
...aaand not to mention I don't know what adb is exactly...
Does your phone still go to clockwork when you go to recovery?
Am going to try it right now, but will that work if I cannot tell my phone to allow usb debugging? i remember something about unrevoked needing that to root the phone in the first place. will update as soon as I try it. May not have time right now as I have to leave in about 15 mins. If no reply by 9:45, then I will be back online tomorrow morning. and thanks!
Timeconsumer10 said:
Am going to try it right now, but will that work if I cannot tell my phone to allow usb debugging? i remember something about unrevoked needing that to root the phone in the first place. will update as soon as I try it. May not have time right now as I have to leave in about 15 mins. If no reply by 9:45, then I will be back online tomorrow morning. and thanks!
Click to expand...
Click to collapse
Welcome, but yes, you do need to have had usb debugging enabled, so we'll see how that goes.
SUPER THANKS! S-OFF tool worked perfectly just flashed a rom and now so far so good. Will post tomorrow to let you know if everything works well. So much appreciated =) I would thanks a million times if i could don't know what to do without my evo.
Timeconsumer10 said:
SUPER THANKS! S-OFF tool worked perfectly just flashed a rom and now so far so good. Will post tomorrow to let you know if everything works well. So much appreciated =) I would thanks a million times if i could don't know what to do without my evo.
Click to expand...
Click to collapse
Lol, it'd take you 200,000 days since you can only thank 5 times a day Though glad you're rooted now.
shortydoggg said:
Does your phone still go to clockwork when you go to recovery?
Click to expand...
Click to collapse
Yes it still goes to clockwork because its rooted.. now my screen legitimately does not work in certain areas of the screen (not responding to touch) so I'm going to try and get it stock stock stock unrooted and go for warranty replacement. Any ideas please let me know. Currently trying RUU Supersonic...
So, I got an ERROR [110] message from the RUU package its a file open error... :/ now i dont know what is up. Says I need a complete RUU package. Looking for another one or another option now.
If i boot phone normally now it just goes to a black screen with "htc" in the middle and "!" in a triangle in all four corners. Can't do anything from that screen.
If I boot into bootloader once where it says SHIP S-OFF at the top and instead of recovery and all those options it just says RUU but you cant do anything there... :/ I now, however cannot even get to the bootloader screen.
Could they tell it is rooted?
Maybe I could say I finally decided to do sprints OTA update that I've been denying for a while and this is the result.
Anyone agree disagree?
COCLUSION!
So. Since it has just the HTC logo and four error icons one in each corner... I took it into a sprint repair store. It would not boot into bootloader as a hard reset, so the guys at the store were stumped. They had actually never seen this before =). They asked me if I rooted it and all so I just played dumb. I told em I didn't know what that really was. They kinna explained it and I told em I didn't even have a computer (not a lie actually I sold mine and now use my dads or gfs lol). The logo on the screen was an oooold htc logo from like hero or so. So they just put it in the system as a wont even turn on type of thing and gave me a new phone since I was under warranty =) gonna see if I can live without root juuust for a little bit because work and school are gonna keep me busy for a while. I am certain to return though!
Can't wait to see what the devs can do by then!
Thanks to all for the help!

[Q] I messed up my phone. please help

Okay.. so I was attempting to root my phone.. started the Odin.. my phone showed up.. then did the PDA thing & clocked start.. well bout 5 seconds later my stupid PC restarts & basically my phone was stuck. So I had to restart my phone.. it stars up.. now it has te yelow triangle.. but nothing works on my phone. No apps are working. Even my buttons on the bottom of the phone wont light up or work. So I thought of just do a hard reset And go back to the beginning.. but when I go to recovery mode I gotta use the home Button to select an option but my home button wont work.
I can get into the settings on my phone & when I went to the about phone section.. it says "unknown" for the baseband version and for the hardware version. Plus everytime I restart the phone it goes back to 12am..
Can someone please try to help me..
one more issue...
My phone has no service at all now either... what do I do!???
Go into Bootloader again. Volume down with the power button and use odin to flash this kernal for root.
http://forums.acsyndicate.net/showthread.php/3102-KERNEL-CWM-ODIN-LoStKernel-Root-BB-CWM5-Tweaks-WIP
but if u need to redo the whole thing like in ur situation. follow these intructions in odin.
http://forum.xda-developers.com/showthread.php?t=1368180
---------- Post added at 08:30 AM ---------- Previous post was at 08:23 AM ----------
MissLaniS said:
My phone has no service at all now either... what do I do!???
Click to expand...
Click to collapse
Did u forget to Uncheck F- reset time? just folow the intructions i gave u and see if it helped.
reply.. help
So Im still confused.. I also have an issue kinda.. cuz I dont have internet access at my house.. so its sorta kinda hard to do all this.. But Ill figure out something..
When i turned on my phone today it says Sansung Galaxy Sii then it says something like i1900 or something.. & has the yellow triangle.. My phone is not an i1900 its the d710 or whatever the sprint model is..
So in order to get my phone back to basically the way it came when i took it out of the box.. what do I need to download?
& when I do download the file..
I use the ODIN program.. open it.. then plug in my phone USB.. & it should recognize it..right?
then i do the PDA button.. & look for the file.. then push start.. & it should do its thing, then reboot & it will be okay then?? I hope??
Do i need to have my phone in debugging mode.. dO ineed to have my SD card in my phone?
I just wanna make sure I get everything right before I attempt to do any more kinds of tweaking on my phone..
Im so frustrated without my phone & i havent even had this phone for a month yet & already I messed it up..
I was just trying to do the simple ROOT so that I can use the USB tether since I have no internet at home.. but I guess I didnt succeed.. Sucks
Thanks for youe help again guys.. I really appreciate it
MissLaniS said:
So Im still confused.. I also have an issue kinda.. cuz I dont have internet access at my house.. so its sorta kinda hard to do all this.. But Ill figure out something..
When i turned on my phone today it says Sansung Galaxy Sii then it says something like i1900 or something.. & has the yellow triangle.. My phone is not an i1900 its the d710 or whatever the sprint model is..
So in order to get my phone back to basically the way it came when i took it out of the box.. what do I need to download?
& when I do download the file..
I use the ODIN program.. open it.. then plug in my phone USB.. & it should recognize it..right?
then i do the PDA button.. & look for the file.. then push start.. & it should do its thing, then reboot & it will be okay then?? I hope??
Do i need to have my phone in debugging mode.. dO ineed to have my SD card in my phone?
I just wanna make sure I get everything right before I attempt to do any more kinds of tweaking on my phone..
Im so frustrated without my phone & i havent even had this phone for a month yet & already I messed it up..
I was just trying to do the simple ROOT so that I can use the USB tether since I have no internet at home.. but I guess I didnt succeed.. Sucks
Thanks for youe help again guys.. I really appreciate it
Click to expand...
Click to collapse
Okay, After u go to this link and Download the rom. plug in ur phone and make sure you UNCHECK F-Reset time. the only one that should be checked is Auto reboot. after u do that. click the PDA and put the rom in. Double check again to see if its only Auto reboot and click start. it should give u full root access and ur phone will be back to normal if u do it right. i do not guarantee it but im 89% sure it'll work.
http://forum.xda-developers.com/showthread.php?t=1368180
MissLaniS said:
So Im still confused.. I also have an issue kinda.. cuz I dont have internet access at my house.. so its sorta kinda hard to do all this.. But Ill figure out something..
When i turned on my phone today it says Sansung Galaxy Sii then it says something like i1900 or something.. & has the yellow triangle.. My phone is not an i1900 its the d710 or whatever the sprint model is..
So in order to get my phone back to basically the way it came when i took it out of the box.. what do I need to download?
& when I do download the file..
I use the ODIN program.. open it.. then plug in my phone USB.. & it should recognize it..right?
then i do the PDA button.. & look for the file.. then push start.. & it should do its thing, then reboot & it will be okay then?? I hope??
Do i need to have my phone in debugging mode.. dO ineed to have my SD card in my phone?
I just wanna make sure I get everything right before I attempt to do any more kinds of tweaking on my phone..
Im so frustrated without my phone & i havent even had this phone for a month yet & already I messed it up..
I was just trying to do the simple ROOT so that I can use the USB tether since I have no internet at home.. but I guess I didnt succeed.. Sucks
Thanks for youe help again guys.. I really appreciate it
Click to expand...
Click to collapse
I understand your frustration. I'd be devastated without my phone.
First off, the "GT-i9000" logo and triangle is completely normal. You have nothing to worry about.
As far as using Odin, you have everything correct. Just make sure auto reboot is the only thing checked.
Use this to flash back to stock.
http://forum.xda-developers.com/showthread.php?t=1383678
Make sure the phone IS in debugging mode and NO you don't need an external SD card to perform these steps. It's irrelevant.
Sent from the future.
I would recommend that you try the steps from the guy above me, first.
My steps are usually used if you're soft/hard bricked. Being that you're able to boot the phone, it may not be necessary.
Sent from the future.
reply
Welll I've followed direction. I'm trying to flash the deodexed rooted busybox cw5 ek02 or whatever its called.. does it take a long time to do this.. using odin.. cuz my phone has been plugged in & in download more or whatever.. for almost an hour.. so I have a feeling something is still not right. Cuz I really don't think it should take this long..
& my home & menu buttons don't work now either..
post the Odin log. You may have to open Odin as an administrator. (Right click > run as administrator.)
Edit: by the way, Odin never takes an hour to do anything.
Sent from the future.
MissLaniS said:
Welll I've followed direction. I'm trying to flash the deodexed rooted busybox cw5 ek02 or whatever its called.. does it take a long time to do this.. using odin.. cuz my phone has been plugged in & in download more or whatever.. for almost an hour.. so I have a feeling something is still not right. Cuz I really don't think it should take this long..
& my home & menu buttons don't work now either..
Click to expand...
Click to collapse
You will need internet and a computer, go to a friends if u can and restore your phone back to stock with Odin. Relax I went through the same thing. Just search "back to stock on Epic Touch 4G " on these forums. ACS has a great step by step. Good luck!!!!

TP2 Flashed with wrong HSPL,what can i do :(

hello guys,
after a long research i landed to this forum at last.
today morning i had a client who wanted to have new rom on his tp2 with russian language. but unfortunatly i flashed the tp2 with a wrong flasher! first time hapening something like this... i was pretty sleepy that i didnt even recognised that it was the wrong one... and now the client wants his phone back but the phone dosnt even turn on and not going in the boot menu... only when i plug the usb cable to the pc with the tp2, the pc recognises that there is a usb connected.. but only this.. im really stuck in a bad situation i would be very appreciative if someone can help me with this out the client will come tomorrow again, i hope there is some options to get the tp2 back alive
Try to flash back with stock, but depending on what you've flashed, it might very well be bricked.
This is why you should always be careful as to pay attention to what you are flashing.
Did you apply the wrong hSPL, or the wrong ROM? Did you flash something meant for a CDMA device on a GSM device...? Please, explain exactly what you have done.
Firstly thank you very much for your answer. I apply the wrong hSPL. HardSPLWrapper_Blackstone i used, the hSPL from blackstone >.< ..my device is htc touch pro 2 Sprint . It much be CDMA but with Gsm radio as far i know. actually the progress didnt start.. there were not a loading bar and no boot mode on phone screen (green-blue-red). suddenly phone turned off and red service light turned on.now when i connect it to pc,i hear usb connected sound and the pc reads the phone as ''qualcomm cdma tecnologies msm'' and requests driver for it.
Does anyone have a clue if there is a solution or what i can do ? or even if there is no way to fix it, except with Jtag ? :S
yildizgsm said:
Does anyone have a clue if there is a solution or what i can do ? or even if there is no way to fix it, except with Jtag ? :S
Click to expand...
Click to collapse
You flashed a RHOD with hSPL for BLAC. That's pretty blatant mistake dude.
I'm not sure if there's a way back. Try flashing stock like I already suggested. Try relocking too, I don't know.
You might have to go into mtty, erase everything, flash the radio, then flash stock. Next time, be more careful.
I would flash it back to stock but the problem is that i need to get activesync with the phone.. my pc dosnt connect to the phone with activesync because i cant open the phone :S do you think with mtty it could work mate ? im gonna search for that now.. thanks
yildizgsm said:
I would flash it back to stock but the problem is that i need to get activesync with the phone.. my pc dosnt connect to the phone with activesync because i cant open the phone :S do you think with mtty it could work mate ? im gonna search for that now.. thanks
Click to expand...
Click to collapse
Try flashing via SD?
yildizgsm said:
Firstly thank you very much for your answer. I apply the wrong hSPL. HardSPLWrapper_Blackstone i used, the hSPL from blackstone >.< ..my device is htc touch pro 2 Sprint . It much be CDMA but with Gsm radio as far i know. actually the progress didnt start.. there were not a loading bar and no boot mode on phone screen (green-blue-red). suddenly phone turned off and red service light turned on.now when i connect it to pc,i hear usb connected sound and the pc reads the phone as ''qualcomm cdma tecnologies msm'' and requests driver for it.
Click to expand...
Click to collapse
HardSpl doesn't show a progress bar when flashed. Can you manually put the phone in bootloader mode (Press volume down button and power it up)?
If you can get it into bootloader what does it show on the screen? You may be able to flash the shipped rom after you are in bootloader if when you connect to your PC it says USB toward the bottom of the bootloader screen and then click on the exe for the shipped rom on your PC. Or maybe try flashing the re-locker as suggested earlier to see if you can install the correct SPL.
i cant get bootloader mode(volum-,power up).im gonna try flash via sd if no succes then gonna try relocker ...i'll post result..
i cant get bootloader mode(volum-,power up).im gonna try flash via sd if no succes then gonna try relocker ...i'll post result..
Click to expand...
Click to collapse
If you flashed the wrong HSPL then you have bricked the device. There is no recovery outside of a jtag box. I don't know of anyone who has made one of those fora Rhodium anyway. It sounds like you owe your client some money.
By the way, if you can't get into the bootloader, then you can't flash via SD.
cajunflavoredbob said:
If you flashed the wrong HSPL then you have bricked the device. There is no recovery outside of a jtag box. I don't know of anyone who has made one of those fora Rhodium anyway. It sounds like you owe your client some money.
By the way, if you can't get into the bootloader, then you can't flash via SD.
Click to expand...
Click to collapse
Indeed, and a great way to end the thread.

Help a Dad out please!!

So to make a long story long! I have a beautiful almost 10 year old daughter who is in need of a phone and I have a droid inc that was giving to me a while back but never was used.. Well I went to power it on and it would just get stuck on the incredible screen..So i did some research on xda and decided to give this a shot through hboot http://forum.xda-developers.com/showthread.php?t=1944012 it seemed to quick to be true which I was correct because it still pretty much does the same thing but I did notice some differences.. I noticed the charging light now comes on when plugged in, the white droid incredible screen looks different then past, also the date on the hboot screen changed from 2010 to 2012.. Any help at all would be super! I am attaching some pictures to show what I get.. Please help times are a little tough and I cant really afford to go out and spend $$ on a new phone..
fyi Im not exactly a noob but I wouldnt clasify myself as a expert.. So if I ask dumb questions I apologize in advance.. Thanks guys y"all rock, XDA has been making my phone awesome since 2008!!!
Best bet is to flash the latest stock RUU. You can find instructions all over on how to do it and you can find the files here: http://dinc.does-it.net/Stock_Images/
smpauls06 said:
fyi Im not exactly a noob but I wouldnt clasify myself as a expert.. So if I ask dumb questions I apologize in advance.. Thanks guys y"all rock, XDA has been making my phone awesome since 2008!!!
Click to expand...
Click to collapse
Either the ruu you used the first time was corrupt, or you may need to backup your sdcard to a pc, format it fat32 and then put only the PB31IMG.zip back on it in no folders. The lates ruu is here http://dinc.does-it.net/Stock_Images/4.08.605.15/PB31IMG.zip. If that dosent fix it you will need to root the phone and get a custom recovery on there.
smpauls06 said:
So to make a long story long! I have a beautiful almost 10 year old daughter who is in need of a phone and I have a droid inc that was giving to me a while back but never was used.. Well I went to power it on and it would just get stuck on the incredible screen..So i did some research on xda and decided to give this a shot through hboot http://forum.xda-developers.com/showthread.php?t=1944012 it seemed to quick to be true which I was correct because it still pretty much does the same thing but I did notice some differences.. I noticed the charging light now comes on when plugged in, the white droid incredible screen looks different then past, also the date on the hboot screen changed from 2010 to 2012.. Any help at all would be super! I am attaching some pictures to show what I get.. Please help times are a little tough and I cant really afford to go out and spend $$ on a new phone..
Click to expand...
Click to collapse
Yep..install the android sdk and get the platform tools folder pack. Go to htcdev.com register and skip the boot loader update just unlock it and install TWRP recovery .. Download from the TWRP website I forget the URL right now.. From there rename the recovery image to recovery.img put the phone back to fast boot and open a window inside the platform tools folder.. You should be able to get the download from and s-off guide.. Anyways plug the phone in and type fastboot flash recovery recovery.img.. Then reboot boot loader hit boot loader and press the power button and go to recovery and hit power... From there you can mount the phone as a USB drive transfer cm7 or touch of blue my favorite gingerbread choices and flash it .. And flash the gapps package with cm7 to hope that helps a littel

Categories

Resources