[Q] OMG! Accidentally Formatted system data! - EVO 4G Q&A, Help & Troubleshooting

Alright. For starters, xda has been VERY VERY helpful to me over the past few months and I thank everyone who has ever contributed to a question or a discussion I have read. That being said, this is my first post. I watched the newb video, read many forums (both xda and others), google searched, read some more threads, kept reading threads, tried some methods described in some threads, bookmarked some interesting threads for if my phone ever works again, and read some more threads.
I am not saying the answer is not already out there, I am saying I have reached my resourcefulness cap.
Anyway, to the root of the problem: I'm not entirely new to rooting, and am comfortable using recovery and hboot to flash roms. I also had a nandroid backup! for SOME SILLY reason, while in my clockworkmod recovery this morning (maybe slightly due to being half asleep which is why I now recommend being fully awake before entering hboot or recovery or rom manager....etc) I formatted the system on my phone. I THINK.
My phone will now load up to display the bootloader, and go into recovery mode, and flash roms, but when I flash a rom, nothing changes. If I boot my phone up, it will show a notification bar at the top like usual, a stock wallpaper, and that is IT! it will show a message notification and missed call icon since I have them, but the touch screen will not work. The rosie buttons at the bottom do not show up (i.e. phone button or all aps button) no apps appear, no clocks except for in the notification bar... hardkeys have no effect (home button search button menu or back) and volume keys will not work. The lock button will only lock and unlock the screen, not power off or reboot or anything. If plugged in at this point, it is charger only.
So, I can take the micro sd card out and put files on it from my PC via a microsd-usb converter thing...
I have tried putting new roms on the sd and flashing them from recovery, no effect. Tried the RUU_Supersonic_1.32.651.1_Radio_1.39.00.04.26_release_171253.exe program, it always says that my phone has below 30% battery and will not continue (this is not the case as I have two batteries both have been fully charged because the phone will still charge them...)
And I have tried putting PC36IMG.zip files on my sd card to no avail.
I am thinking that the system was wiped because it seems like there is no boot image on the phones internal memory itself. I am currently looking for a way to place a boot image on the sd card to possibly flash it or some sort of update.zip so that my bootloader will ask me to update upon reading it.
Sorry for the long post, and ask any questions I will answer as best I can.
I am posting preemptively to the boot image adventure so that if it does not work, maybe I can have some help finding a solution by then.
I was going to take my evo to the sprint store since it is under warranty but if they go into recovery they will see clockworkmod recovery.
Thanks to all for any form of guidance!
I did just notice in my Bootloader menu (HBOOT-2.10.0001) that it says Supersonice evt2-3 **** S-ON
I don't know how because I thought it was a requirement that it says S-OFF to be rooted and flash roms, but I have definitely flashed roms before and gained su access to applications and such. BUT since it says S-ON would it then be covered by the warranty if it is not rooted?
Thanks again.

I you want to flash a boot image, you can take the boot.img from an RUU for the firmware you are, place it in your adb tools folder, then flash it using the commands:
fastboot flash boot boot.img
fastboot reboot

I'm not sure how to identify what firmware I am. Unless your talking about the Hboot version? and also, I can't place anything in any folder except onto my sd card. I have no access other than that to the phone. On the sd card there are no files except for what I put on there.
...aaand not to mention I don't know what adb is exactly...

Does your phone still go to clockwork when you go to recovery?

Am going to try it right now, but will that work if I cannot tell my phone to allow usb debugging? i remember something about unrevoked needing that to root the phone in the first place. will update as soon as I try it. May not have time right now as I have to leave in about 15 mins. If no reply by 9:45, then I will be back online tomorrow morning. and thanks!

Timeconsumer10 said:
Am going to try it right now, but will that work if I cannot tell my phone to allow usb debugging? i remember something about unrevoked needing that to root the phone in the first place. will update as soon as I try it. May not have time right now as I have to leave in about 15 mins. If no reply by 9:45, then I will be back online tomorrow morning. and thanks!
Click to expand...
Click to collapse
Welcome, but yes, you do need to have had usb debugging enabled, so we'll see how that goes.

SUPER THANKS! S-OFF tool worked perfectly just flashed a rom and now so far so good. Will post tomorrow to let you know if everything works well. So much appreciated =) I would thanks a million times if i could don't know what to do without my evo.

Timeconsumer10 said:
SUPER THANKS! S-OFF tool worked perfectly just flashed a rom and now so far so good. Will post tomorrow to let you know if everything works well. So much appreciated =) I would thanks a million times if i could don't know what to do without my evo.
Click to expand...
Click to collapse
Lol, it'd take you 200,000 days since you can only thank 5 times a day Though glad you're rooted now.

shortydoggg said:
Does your phone still go to clockwork when you go to recovery?
Click to expand...
Click to collapse
Yes it still goes to clockwork because its rooted.. now my screen legitimately does not work in certain areas of the screen (not responding to touch) so I'm going to try and get it stock stock stock unrooted and go for warranty replacement. Any ideas please let me know. Currently trying RUU Supersonic...

So, I got an ERROR [110] message from the RUU package its a file open error... :/ now i dont know what is up. Says I need a complete RUU package. Looking for another one or another option now.
If i boot phone normally now it just goes to a black screen with "htc" in the middle and "!" in a triangle in all four corners. Can't do anything from that screen.
If I boot into bootloader once where it says SHIP S-OFF at the top and instead of recovery and all those options it just says RUU but you cant do anything there... :/ I now, however cannot even get to the bootloader screen.
Could they tell it is rooted?
Maybe I could say I finally decided to do sprints OTA update that I've been denying for a while and this is the result.
Anyone agree disagree?

COCLUSION!
So. Since it has just the HTC logo and four error icons one in each corner... I took it into a sprint repair store. It would not boot into bootloader as a hard reset, so the guys at the store were stumped. They had actually never seen this before =). They asked me if I rooted it and all so I just played dumb. I told em I didn't know what that really was. They kinna explained it and I told em I didn't even have a computer (not a lie actually I sold mine and now use my dads or gfs lol). The logo on the screen was an oooold htc logo from like hero or so. So they just put it in the system as a wont even turn on type of thing and gave me a new phone since I was under warranty =) gonna see if I can live without root juuust for a little bit because work and school are gonna keep me busy for a while. I am certain to return though!
Can't wait to see what the devs can do by then!
Thanks to all for the help!

Related

[Q] Did I brick my phone?

Hello,
I was trying to flash a new Rom onto my phone (Superfly) and installed the .zip file from clockwork, however, when I try to boot the phone, it sticks at the Mytouch slide screen.
I cant load into the card nor the phone.
Is there any way to reverse this?
Thanks in advance!
Hopefully you made a backup. You should still be able to boot into recovery and restore your backup or even flash a new rom.
sandpaperback said:
Hopefully you made a backup. You should still be able to boot into recovery and restore your backup or even flash a new rom.
Click to expand...
Click to collapse
The problem the OP and myself are having is that we cant load Clockwork recovery, and I think its cause when we flashed the new rom, it did away with USB debugging mode, and now we cant get back into the OS to select it again. I too am stuck in this loop, and I might just have to bite the bullet and bring it in to tmo and tell em it just stopped working for no reason...
dion20 said:
The problem the OP and myself are having is that we cant load Clockwork recovery, and I think its cause when we flashed the new rom, it did away with USB debugging mode, and now we cant get back into the OS to select it again. I too am stuck in this loop, and I might just have to bite the bullet and bring it in to tmo and tell em it just stopped working for no reason...
Click to expand...
Click to collapse
The USB debugging option means nothing while booted in to recovery. If you haven't flashed the engineering rom before you will need to redo the loop/ota.zip/update.zip spoof to get back in to clockwork.
I did do a nandroid backup, but the phone magically can not find it now. And It took forever to get to work, but I was finally able to get back into clockwork and tried to install another a different rom (Kanged CM6 ROM) but ended with the same results of sticking on the mytouch slide startup screen. Frustrating, because it probably took about 3 hours to get back into clockwork!
Any other suggestions???
wipe everything on the phone, find the thread that walks you through that
cursexcore said:
I did do a nandroid backup, but the phone magically can not find it now. And It took forever to get to work, but I was finally able to get back into clockwork and tried to install another a different rom (Kanged CM6 ROM) but ended with the same results of sticking on the mytouch slide startup screen. Frustrating, because it probably took about 3 hours to get back into clockwork!
Any other suggestions???
Click to expand...
Click to collapse
As was noted previously, if you haven't flashed the ESPRIMG rom, you're basically looking at re-rooting your phone every time you want to install a different rom. This means going through the whole process again and again and again.
falken98 said:
The USB debugging option means nothing while booted in to recovery. If you haven't flashed the engineering rom before you will need to redo the loop/ota.zip/update.zip spoof to get back in to clockwork.
Click to expand...
Click to collapse
thats weird, cause before I could get into clockwork after 2 tries max, not I tried repeatedly for 10 mins and it didnt work, so I should just keep tryin to get into clock work then?
Yes, keep trying. And when you do, please flash the engineering rom and keep the proper update.zip on your card! It will save you a lot of trouble in the long run.
sandpaperback said:
Yes, keep trying. And when you do, please flash the engineering rom and keep the proper update.zip on your card! It will save you a lot of trouble in the long run.
Click to expand...
Click to collapse
will do, theres alot of assumptions around here tho, and newbs to android are kinda expected to know things without them being stated in the threads..
Now I know theres something that makes it so I dont have to go thru the pain of rooting to get into clockwork I'm def gna use it..
what method should I use? Ive been doing the following and no luck so far
1 - cd to android sdk tools folder
2 - vol down + power for recovery
3 - highlight recovery
4 - run loop in cmd
5 - plug usb into phone
6 - plug usb into pc, and before it changes to HBOOT from USB i hit power to select recovery
7 - adb devices sees it as an offline device for a few cycles, then it disappears.
after step 7 I've tried running update.zip
unplugging and plugging back in
ctrl+c to stop the script when its offline
unplug when its noticed as an offline device
whats the best way to get into it now?
======
EDIT - finally got it into recovery, i loaded up htc's recover with it plugged it to the pc so it loaded up HBOOT from USB
normally your are not bricked if:
1. you can boot into recovery
2. you can not boot into recovery yet you can boot into bootloader [HOLD (power + volume down) to boot]
Don't worry I got a black/blank screen of death the other day for flashing the wrong boot.img fortunately I was able to boot into bootloader and start from scratch using the ESPRIMG.zip
dion20 said:
will do, theres alot of assumptions around here tho, and newbs to android are kinda expected to know things without them being stated in the threads..
Click to expand...
Click to collapse
I agree to an extent, but if you take the time to read through things thoroughly (as in every post in the How To Root or Engineering Build or even Rom Bible thread), you'll be okay. This is my first Android device as well. I put off rooting for a solid couple of weeks while I read through everything I could. I was completely paranoid about bricking my phone. Eventually, I went for it. Even then I had a couple hiccups along the way (including have to re-root two more times), but all the information is here.
So an update:
I went to a Tmobile retail store to see if I could do a direct swap and am having a new phone sent out to me. I will definately take all the replies into consideration when starting the root process on my new one! My final question is, since I am afraid Tmobile will not find my phone valid to be replaced under warranty due to it being rooted, is there any way to unroot and go back to stock? I have googled it, but cannot find anything specific for the slide...
Thanks!
cursexcore said:
[blah blah blah....] My final question is, since I am afraid Tmobile will not find my phone valid to be replaced under warranty due to it being rooted, is there any way to unroot and go back to stock? I have googled it, but cannot find anything specific for the slide...
Thanks!
Click to expand...
Click to collapse
My question: did u search here?
http://forum.xda-developers.com/forumdisplay.php?f=660
And found items about the champion build and this little file named ESPRIMG.zip?
U can also check out the ROM BIBLE stickie post.
u can try this:
http://forum.xda-developers.com/showthread.php?t=713507
or you can try this:
http://forum.xda-developers.com/showthread.php?t=713507
now if you really searched you would of found your own question:
http://forum.xda-developers.com/showthread.php?t=744709&highlight=unroot
cursexcore said:
So an update:
I went to a Tmobile retail store to see if I could do a direct swap and am having a new phone sent out to me. I will definately take all the replies into consideration when starting the root process on my new one! My final question is, since I am afraid Tmobile will not find my phone valid to be replaced under warranty due to it being rooted, is there any way to unroot and go back to stock? I have googled it, but cannot find anything specific for the slide...
Thanks!
Click to expand...
Click to collapse
I had the same problem you did, and fixed my phone, so its possible. refer to my post on the first page and then refer to this post and use the mirror that Wes himself posted.
http://forum.xda-developers.com/showpost.php?p=7001053&postcount=7

[Q] Boot Looping + No Recovery Access

Hi Guys, Idon't post too often as you can see, but I have had a great time rooting my Evo and learning from all the awesome members here. I do my research, and until now I have not run across a problem I could not fix on my own.
I am running CM7 nightly 26, and out of nowhere today, my phone rebooted and proceeded to get stuck in a boot loop. I am not surprised by that kind of thing at this point, but for the first time ever, I was not able to boot into recovery. If I select that option from the boot loader, I just get the white Evo 4G screen and it proceeds to boot loop.
Ok, I thought, maybe my recovery was corrupted somehow, so I pull the SD card and put Amon Ra 2.3 in the root directory and named it PC36IMG.zip and flashed it. No good. I still can't get into recovery.
I also tried downloading the stock (rooted) sprint ROM, putting on the root of my SD card and naming it PC36IMG.zip. After the bootloader detects it and the progress bar finishes, it says "Parsing PC36IMG.zip", and then it just takes me back to the bootloader main menu without an option to flash anything.
Also, is there a way to get S-ON back (with my only access being to the bootloader) in the event that I have to take it in? The alternative would be to drown it or smash it (as a last resort)
Any ideas? Thanks very much in advance for any help!
Westibone said:
Hi Guys, Idon't post too often as you can see, but I have had a great time rooting my Evo and learning from all the awesome members here. I do my research, and until now I have not run across a problem I could not fix on my own.
I am running CM7 nightly 26, and out of nowhere today, my phone rebooted and proceeded to get stuck in a boot loop. I am not surprised by that kind of thing at this point, but for the first time ever, I was not able to boot into recovery. If I select that option from the boot loader, I just get the white Evo 4G screen and it proceeds to boot loop.
Ok, I thought, maybe my recovery was corrupted somehow, so I pull the SD card and put Amon Ra 2.3 in the root directory and named it PC36IMG.zip and flashed it. No good. I still can't get into recovery.
I also tried downloading the stock (rooted) sprint ROM, putting on the root of my SD card and naming it PC36IMG.zip. After the bootloader detects it and the progress bar finishes, it says "Parsing PC36IMG.zip", and then it just takes me back to the bootloader main menu without an option to flash anything.
Also, is there a way to get S-ON back (with my only access being to the bootloader) in the event that I have to take it in? The alternative would be to drown it or smash it (as a last resort)
Any ideas? Thanks very much in advance for any help!
Click to expand...
Click to collapse
Many of us are racking our brains trying to figure out what is causing this situation. Everyone who are experiencing this were using CM7, like you, and it happened to of nowhere and for no known reason. I don't think anyone has figured out a workaround, but I could be wrong. I haven't ready through the forums today regarding this issue. Just know that you are not alone, my friend....
Well, it doesn't look too hopeful from what I have seen so far, but thanks for the support. It's good to know that I am not alone.
If you can still access the bootloader, you should still be able to run an RUU through fastboot.
It happened to me, I was one of the first on the forum it happened to, in January. Was never able to fix it, you could spend a loonnngggg time, and get no results. If you search for my threads you can see the ones I started about the subject.
Long story short, I was never able to fix the problem or get S-On. However by doing a battery pull while flashing a rom with a different radio, during the radio installation, I bricked my phone to the point that it wouldn't even turn on. So thats basically your only way out that I know of. You'll have to perform the battery pull upwards 20 times probably before you get the phone to fully brick.
I'm on CM7 nightlies. What are the HW specs of those having these problems? I thought it was due to CWM but there have been some on RA experiencing this too. Just wondering if this is more specific to the newer HW builds/hboots or occurs with all phones.
My Evo is hardware version 003 for what it's worth.
Westibone said:
My Evo is hardware version 003 for what it's worth.
Click to expand...
Click to collapse
When you select recovery, what happens?
I had same issue in Jan after flashing miui.
tried the suggestions on this thread..but nothing worked:
http://androidforums.com/evo-4g-support-troubleshooting/267018-struck-boot-loop.html
Had to replace my phone...that seems to be the only way out of this.
This is the reason I have stayed away from CM for so long. I keep seeing these horror stories about bootlooping, etc. I know its awesome when its running, but when it comes to the point where bricking your phone on purpose is a good thing, something is wrong For those that it has happened to above, did you get your new one and go back to CM (or any other AOSP rom)?
teh roxxorz said:
When you select recovery, what happens?
Click to expand...
Click to collapse
When I select recovery, it just goes back to the white Evo 4G screen and proceeds to boot loop. Over and over again
My God, another one. It's weird these seem to be happening more and more...
Westibone said:
When I select recovery, it just goes back to the white Evo 4G screen and proceeds to boot loop. Over and over again
Click to expand...
Click to collapse
http://dl.dropbox.com/u/19699565/3.70 RUU Zip.zip Rename it to PC36IMg. Its 3.70 ruu, flash it in the bootloader, then re-root.
teh roxxorz said:
http://dl.dropbox.com/u/19699565/3.70 RUU Zip.zip Rename it to PC36IMg. Its 3.70 ruu, flash it in the bootloader, then re-root.
Click to expand...
Click to collapse
Hopefully, your RUU will work. Others who have attempted to this this very thing still couldn't make it work. Me, k2buckley and others have yet to figure it out and believe me, we've tried everything within our experience range. A solution will be found, I have no doubt about that, but "when" is the question that I cannot answer.
teh roxxorz said:
http://dl.dropbox.com/u/19699565/3.70 RUU Zip.zip Rename it to PC36IMg. Its 3.70 ruu, flash it in the bootloader, then re-root.
Click to expand...
Click to collapse
Don't know why this keeps happening dude. Just like all the other ones. I promise (unfortunately) that this guy isn't going to be able to recovery. Same as the others. THe RUU won't work, neither will the PC36IMG. I don't know why. THey may appear to complete successfully, but the result will still be hanging at the splash screen. That is my prediction, let's see his results. I hope I'm wrong, truly, I do.
k2buckley said:
Don't know why this keeps happening dude. Just like all the other ones. I promise (unfortunately) that this guy isn't going to be able to recovery. Same as the others. THe RUU won't work, neither will the PC36IMG. I don't know why. THey may appear to complete successfully, but the result will still be hanging at the splash screen. That is my prediction, let's see his results. I hope I'm wrong, truly, I do.
Click to expand...
Click to collapse
I hope you are too, but I have saved 1 person with the RUU, so I can hope to save more, but yea, I don't know what's causing this pandemic cuz I've been flashing the latest nightlies, reflashing my kernel, with no problems...I hope it works.
Same Here
Wow, what a coincidence, this just happend to me last night. I had just finished installing and flashing the new, SavagedZen(MOD)-RC1-Evo4G, Rom. Went to bed and sometime during the night the phone got stuck on restarting on the EVO white screen and turning off and on continusly. I have tried all the efforts of putting the stock ROM back on and everything else mentioned in this thread, but to no avail. Like you said, cant get into recovery or anything, just keeps looping through startin and stopping.
With all that is said so far on this thread, it looks like a new phone is the only way to fix this.
Westibone said:
Hi Guys, Idon't post too often as you can see, but I have had a great time rooting my Evo and learning from all the awesome members here. I do my research, and until now I have not run across a problem I could not fix on my own.
I am running CM7 nightly 26, and out of nowhere today, my phone rebooted and proceeded to get stuck in a boot loop. I am not surprised by that kind of thing at this point, but for the first time ever, I was not able to boot into recovery. If I select that option from the boot loader, I just get the white Evo 4G screen and it proceeds to boot loop.
Ok, I thought, maybe my recovery was corrupted somehow, so I pull the SD card and put Amon Ra 2.3 in the root directory and named it PC36IMG.zip and flashed it. No good. I still can't get into recovery.
I also tried downloading the stock (rooted) sprint ROM, putting on the root of my SD card and naming it PC36IMG.zip. After the bootloader detects it and the progress bar finishes, it says "Parsing PC36IMG.zip", and then it just takes me back to the bootloader main menu without an option to flash anything.
Also, is there a way to get S-ON back (with my only access being to the bootloader) in the event that I have to take it in? The alternative would be to drown it or smash it (as a last resort)
Any ideas? Thanks very much in advance for any help!
Click to expand...
Click to collapse
By some awkward chance, have you tried a full wipe, and then flash a sense rom?
teh roxxorz said:
I hope you are too, but I have saved 1 person with the RUU, so I can hope to save more, but yea, I don't know what's causing this pandemic cuz I've been flashing the latest nightlies, reflashing my kernel, with no problems...I hope it works.
Click to expand...
Click to collapse
There was actually one guy that I was able to help recover. (it was short lived though). After trying like 10 different RUU's, one of them had finally took. The phone booted up into a stock sense rom, and the kid was stoked. About 10 minutes after he was up again, his phone rebooted again. Stuck at the splash screen again (this was stock, and he still had s off, because we couldn't ever turn it on). I had him try flashing a recovery again, and low and behold it worked, and he flashed a sense rom. Things seemed fine, and I didn't hear back from him. A few days later, he PM'd be back, saying that it randomly rebooted again, and was stuck at the same splash screen loops. He ended up exchanging his phone. He was the ONLY one, out of quite a few that I've tried to assist through this problem, that was actually able to boot the phone again. Unfortunately, it wasn't stable for him, and then it ended up doing the same thing. Somehow, some way, I believe that the damage was already done, and he just got lucky to be able to squeeze a few extra days out of his Evo, but it was still a short lived recovery.
It's a very perplexing phenomenon that's going on here.
k2buckley said:
There was actually one guy that I was able to help recover. (it was short lived though). After trying like 10 different RUU's, one of them had finally took. The phone booted up into a stock sense rom, and the kid was stoked. About 10 minutes after he was up again, his phone rebooted again. Stuck at the splash screen again (this was stock, and he still had s off, because we couldn't ever turn it on). I had him try flashing a recovery again, and low and behold it worked, and he flashed a sense rom. Things seemed fine, and I didn't hear back from him. A few days later, he PM'd be back, saying that it randomly rebooted again, and was stuck at the same splash screen loops. He ended up exchanging his phone. He was the ONLY one, out of quite a few that I've tried to assist through this problem, that was actually able to boot the phone again. Unfortunately, it wasn't stable for him, and then it ended up doing the same thing. Somehow, some way, I believe that the damage was already done, and he just got lucky to be able to squeeze a few extra days out of his Evo, but it was still a short lived recovery.
It's a very perplexing phenomenon that's going on here.
Click to expand...
Click to collapse
I hope my case doesn't come back to haunt me. Seems like we got a T Virus of phone crashings going around...those already along their way [like you and I] are imune...the newer ones get sucked in. we haz to fix this soon-ishly.

[Q] Unique problem(Stuck at splash screen.Cannot get into recovery mode, only Hboot

I thought I had it all figured. Root, with Clockwork Recovery, Rom Manager. Nothing could go wrong. Now I am stuck at the splash screen with no Clockwork Recovery.
I searched fourum after forum to find a solution, but mine seems to be different. Just so you know I am 21, and a freelance computer technician so I am not afraid of the command line
What have I done to my device:
=Originally it had 2.1
=I rooted the phone via exploid method
=I installed CyanogenMod 6.1.1
+My computer only recognized my phone in HBoot mode, I think usb debugging is turned off though because I cannot acces my sd while it is in my phone.
I do have a microsd card reader
+I tried Esprimg.zip updates. It works .but I still cannot get into recovery mode.
For extra precaution, I backed up all of my sd card data on my pc.
Symptoms and problems:
+I am stuck at the white My tough slide 3g splash screen.
Holding up and power for at least 30 seconds does not get me in recovery mode. All I see is the white My tough slide 3g splash screen. No Black screen with a triangle(Biggest Problem)
+Holding down and power does get me into the HBoot.
+The recovery option will make the Mytouch slide reboot, but it will freeze at the splash screen.
+The clear storage option executed, but it did not solve my problems.
+I have also removed the battery, sim, and sd card.
Summuaray-
I need to get Into Recovery mode, but when I press up and power it does not work. I only see a white.I never though there would be a day where I could not get into recovery.
Also, I constantly charge the device so it wont turn off during an update.
Do you have S-OFF? If you do it should not be hard to recover.
If you don't I can't think of any other method now. But just to make sure which Esprimg.zip method did you tried? Because that should work in the first place.
Mine says S-On
Esprimg.zip
I used my microsd card reader to put esprimg.zip on the sd card. Boot the device while holding down and power. I let the phone check for the esprimg.zip and then the update was successful.
Conclusion:
I hold up and power and i cannot access recovery mode.
Possible causes:
By doing the clear storage, would that change my device to s-on. Honestly I never noticed s-on until now. However, I was able to root and get clockword mod 6.1.1 and it ran smoothly for a weeks.
darko4 said:
By doing the clear storage, would that change my device to s-on.
Click to expand...
Click to collapse
No. Only by flashing another bootloader will you get S-ON back. You probably did not have S-OFF before anyways but FYI Esprimg.zip does flash the bootloader so you're stuck on S-ON for now.
If the Esprimg.zip update method was successful it should have flashed back the stock recovery for you. I can't think of anything that could go wrong at this point except that u have a bad or corrupted Esprimg.zip. Did you use the champion build or the ENG build? If me I'd try to download it again and give it another go.
Good luck!
Ok so Esprimg.zip may be bad, and pretty much that is my only saviour;ok I understand.
I was using Esprimg.zip from other guides. Those were 137 mb
This time I used the one from here.
HOW-TO * Flash the Eng-Release to the Slide *6/15/2010
http://forum.xda-developers.com/showthread.php?t=703076
I am going to assume this the the eng build. It was 137.1 mb.
If this does not work the I guess I have to go champion build.
------------------------------------------------------------------
Failed
Champion build esprimg.zip is next.
A few more ideas.
manually install the recovery using fastboot.
troubleshooting without simcard?
My spl s-on so would that be possible?
Is there a way to maybe re root?
I read in one post that a guy sold it on ebay..i would hate to do that with just a month of ownership. would Htc make a warranty request even though I bought it used. Besides you only see bootloader and hboot spl s-on so how could they tell?
So you reach the screen where it asked you whether you want to install the update, you choose "yes" and it goes on to flash everything, radio, bootloader, yada yada, and it fails to boot?
Basically with S-OFF you can boot into fastboot and run
fastboot flash recovery recovery.img
in this case recovery img is CWM recovery. With S-ON fastboot flash is disable so it's not possible.
EDIT: If you do have the champion build on it's basically stock.
I have this exact same issue right now, I've tried the champion and engineering builds of ESPRIMG but with no success. I can't think of anything else that would be causing this in the first place, which is making it so difficult to troubleshoot. The only difference is that I was using CM7 instead of 6, but the exact same thing is going on. I have tried everything that the OP has with no luck. The only possible cause I can think of is that something was somehow corrupted while the phone was on and sitting on my table...because when I picked it back up, it was off and when I tried to boot, I got splash screen... Any other ideas?? I'm all out and just sitting here waiting for some genius light bulb to go off....attic's kinda dusty though..
With S-ON fastboot flash is disable so it's not possible.
So basically these are my options
esprimg.zip (if that does not work then use different)
Hboot clear memory,
with S-ON I have limited option
and keep it charged.
Although with fastboot and s-on is there something I could do?
Would rerooting be an option
darko4 said:
Would rerooting be an option
Click to expand...
Click to collapse
I don't see a root method in the forum that does not involve booting into a usable system.
Wait, you guys were able to flash the esprimg.zip right? Because in the guide when it says it requires root it's for flashing the mtd0.img first before rebooting into HBoot. Since you don't have a working system you cannot do that and if HBoot refuse to take your esprimg.zip then you need to do the Goldcard method. Otherwise I don't see why having root will make a difference.
So at this stage of the game I should do this..
1.get on my knees
2.put my hands together.
3.and just pray?
ok all jokes aside. Continue to try Esprimg.zip and update(all are successful but I still get splash)
I can't change my recovery since I have s-on
and no way of getting s off since i cant get in the phone, not even recovery,just h boot
So in a sense i have a lovely soft bricked mytouch 3g slide.
Later I might compose a list of the programs i had on the device, but i doubt that would make a difference. I appreciate the help and assistance, I am going to click the thank button for you gents.
In the mean while i got a tmobile comet for 136 one day shipping..No rooting on this one cause finals are coming and I do not have time to troubleshoot for hours. I love android cause of custom roms, but not being able to get in recovery mode...ah say no more. I am going to be one of those people who just downloads free software and complain to phone carriers about OTA.
Same here. I held off rooting and all until my exams were over because I know I'm going to go all the way until I get S-OFF.
I know many discourage S-OFF because it can potentially brick during the process but if you do read up and follow instructions very carefully it is really not that risky. And it'll be very useful in situations like this.
I'm sorry to hear you have a soft-brick. Maybe a dev will stumble upon and provides new insights but I afraid this is all we have in the forum for now.
to be honest i skimmed through the post, and im sure you did try this but just want to ask have you tried the official RUU update to see if you can get things back up running that way?
yeah I understand following directions carefully, but when you follow all of directions and get it working,and make backups, but then you turn the phone off and then turn it on. Then all of this happens.
ah let me stop my whining and download more esprimg.zip .
I just want to know what caused it. was it an application, cause if that is the case then I want to know so no one else get hurt.
(one interesting note, avg antivirus said my device was infected with viruses. It said with the apps, I did not clean it. i uninstalled avg. I presumed it was a false alarm cause the phone is rooted with applications with high privileged) Oh well
---------------------------------------------------------------------------------------------------------------------------------------------------
oh well. back to the esprimg.zip
never tried RUU, if it comes in a esprimg.zip then i guess i can try. if not then i do not know how to use it with mine in its current state
S on (so no advanced fast boot options
Hboot only
no recovery.
clear memory
only productive thing is successful esprimg.zip updates
its the official update to froyo, and need HTCsync and the RUU from htc how the installs procces goes i dont really know, but im sure there is a RUU update that you can use to update via bootloader,
ok i got htc sync
and the official exe.
my pc only detects the device in hboot. The device will read usb hboot.
1 might fiddle around for 20 mins to see whats what.
.
If it was like a esmprimg.zip then it would seem more feasible.
goood luck hope you get your phone back up and running
well a week ago it finally booted. I felt that it was a fluke so I pressed the power button to reboot. I tried to turn it back on then it was stuck at the splash screen.
I am now starting to think it is a hardware problem. Either way the unrooted tmobile comet,yes it is small, is doing wonders. The battery life is way better then a iphone 3g.
Just remember guys, if you get an android phone, make sure it is a popular one. That way you are more likely to get support because of the bigger fan base. Oh well it was fun while it lasted. The only thing I hate is that i could have gotten an xbox 360 for the same price. oh well, thanks for the assistance. i will lets you know any further updates.

[Q] **BRICKED**

HI. Okay, so a couple weeks ago, I received a notification from HTC that said there was a new update available. Since I had S-Off and an unlocked bootloader (don't ask why, I just ****ing do.) I could not update, as it would give me errors, and cancel the update. So, earlier today I was fed-up with how slow my phone was being, and I wanted to fix it by updating. So I scoured XDA and found a thread about how to update by updating the HBoot or whatever. I followed those instructions and everything was fine, until I got to the initial part of installing the new **** through RUU. It was running fine, and then all of a sudden, the phone disconnected and ****ed the installation up. My battery was fully charged, and still has a charge as I am writing this. I digress. Whenever I would try to power my phone on, I would feel THREE (3) vibrations, and nothing would happen after. I tried booting into the stock recovery (fastboot, recovery, etc) and would still get THREE (3) vibrations. Bricked. So, I looked through a few threads on XDA, and found a few ways to fix it. Something about a Blind HBoot, or a Qualcomm Diagnostic Mode being stuck or something. Figured it was my best shot to try these. I tried them all. I put the PG76IMG.zip into my SD card, and booted up when holding Volume down, and only got THREE (3) vibrations. The tutorial said I was supposed to get FIVE (5) vibrations. So, I thought maybe it was something strange, and kept going through the tutorial. After five minutes, I'm supposed to press VOL UP, and should feel THREE (3) vibrations. Nothing happened. I waited and waited and tried again, and still, nothing. My phone is still lying here as a paperweight, and I want to get this working, so I can sell it because this phone is too much of a ****ing hassle for me. NOTHING HAS WORKED. ROMS, KERNELS, NOTHING. HAS. WORKED. I'M TIRED OF IT. I'm not a noob, I've been working with Android phones for a long time, and have never quite used an HTC device before. I had a Samsung Galaxy S Fascinate (CDMA) and it lost it's flash after I had moved to a different state. (The state I'm in does not have any towers for that carrier here.) SO. Can ANYONE give me a HIGHLY DETAILED tutorial, STEP BY STEP, to fix my phone?
HTC Wildfire S *Relocked* bootloader S-OFF CDMA METRO PCS.
I have tried everything I can find, and I have reached my wits end, man. Please, for the love of GOD, help me. I would really appreciate it.
I had 1000 rom flashes
3 Updates through RUU
Never had a brick
I hope someone can help you.
This is same as this thread http://forum.xda-developers.com/showthread.php?t=1522235
m1ndh4x8r said:
I had 1000 rom flashes
3 Updates through RUU
Never had a brick
I hope someone can help you.
This is same as this thread http://forum.xda-developers.com/showthread.php?t=1522235
Click to expand...
Click to collapse
I don't see how this helps me.
Help in the sense u have sent it to HTC for repair
Try this http://forum.xda-developers.com/showthread.php?t=1432425
Sent from my HTC_A510c using Tapatalk
kyleisah said:
HI. Okay, so a couple weeks ago, I received a notification from HTC that said there was a new update available. Since I had S-Off and an unlocked bootloader (don't ask why, I just ****ing do.) I could not update, as it would give me errors, and cancel the update. So, earlier today I was fed-up with how slow my phone was being, and I wanted to fix it by updating. So I scoured XDA and found a thread about how to update by updating the HBoot or whatever. I followed those instructions and everything was fine, until I got to the initial part of installing the new **** through RUU. It was running fine, and then all of a sudden, the phone disconnected and ****ed the installation up. My battery was fully charged, and still has a charge as I am writing this. I digress. Whenever I would try to power my phone on, I would feel THREE (3) vibrations, and nothing would happen after. I tried booting into the stock recovery (fastboot, recovery, etc) and would still get THREE (3) vibrations. Bricked. So, I looked through a few threads on XDA, and found a few ways to fix it. Something about a Blind HBoot, or a Qualcomm Diagnostic Mode being stuck or something. Figured it was my best shot to try these. I tried them all. I put the PG76IMG.zip into my SD card, and booted up when holding Volume down, and only got THREE (3) vibrations. The tutorial said I was supposed to get FIVE (5) vibrations. So, I thought maybe it was something strange, and kept going through the tutorial. After five minutes, I'm supposed to press VOL UP, and should feel THREE (3) vibrations. Nothing happened. I waited and waited and tried again, and still, nothing. My phone is still lying here as a paperweight, and I want to get this working, so I can sell it because this phone is too much of a ****ing hassle for me. NOTHING HAS WORKED. ROMS, KERNELS, NOTHING. HAS. WORKED. I'M TIRED OF IT. I'm not a noob, I've been working with Android phones for a long time, and have never quite used an HTC device before. I had a Samsung Galaxy S Fascinate (CDMA) and it lost it's flash after I had moved to a different state. (The state I'm in does not have any towers for that carrier here.) SO. Can ANYONE give me a HIGHLY DETAILED tutorial, STEP BY STEP, to fix my phone?
HTC Wildfire S *Relocked* bootloader S-OFF CDMA METRO PCS.
I have tried everything I can find, and I have reached my wits end, man. Please, for the love of GOD, help me. I would really appreciate it.
Click to expand...
Click to collapse
ok, im not saying i can get it going again but i`ll do my best to help. lets start from the beginning, what actually works atm? you say when you try boot up the phone in any way it just vibrates 3 times.
does it do anything else, does the screen light up?
does it even stay on?
when you connect it to the charger does the led still light up?
have you tried to connect it to the pc? have you tried to connect it too the pc with volume down first?
all seem very basic stuff obviously but if the pc can register it in hboot we might be able to get a ruu running on it.
Found this on a different thread...
Nevermind. Just realized you were still getting three vibrates. Sorry man. I'll keep an eye out if I see anything else that might help.
what is your hboot version? i was see 1.09.099 like in forum maybe you can start with update hboot.
you can use adb for all of this works. download a ruu and run it. after some steps you can find rom.zip in windows/temp extract it to a folder like c:\android\rom and use adb for install all *.img files. maybe it can fix that problem
hypercode said:
what is your hboot version? i was see 1.09.099 like in forum maybe you can start with update hboot.
you can use adb for all of this works. download a ruu and run it. after some steps you can find rom.zip in windows/temp extract it to a folder like c:\android\rom and use adb for install all *.img files. maybe it can fix that problem
Click to expand...
Click to collapse
seriously , adb can install img files ?!
Alright, well, I called htc and told them about my problem, and I might have to just send it in. BUT. I had my phone rooted, and had CM Recovery on it. So, since nothing is booting up at all, only the three vibrates when trying to enter either boot mode, will they be able to see that I had it rooted or anything? They said they'll charge 35$ just to ship it back in the same condition if it is. Can't really afford anything like that right now.
tl;dr I had my phone rooted, but nothing on my phone comes up, will they see my root or anything?
if you are rooted you are probably s-off or at least have unlocked bootloader. and both they will find out very easily.
Sorry for my bad it was fastboot.exe you can install .img files with fastboot.exe i was installed stock recovery with that
Sent from my HTC Wildfire S A510e using XDA App

[q] htc g2 not rooted semi bricked boot looping please help

Long story short my friend gave me a T mobile HTC G2 because it didn't turn on. I opened the phone to find the part where the battery connects to the phone came off the mother board so i solder it back on put the phone back together and turned it on. It booted up normal and came to the lock screen nothing worked the touch wasn't responding so i push power button to turn screen off and then again to turn it back on and the screen worked. I tried guessing his pattern five time and it didnt work it asked me to sign in to my Google account when the screen came up the phone rebooted and it kept doing it every time i turned it on. So i looked on xda how to restore it tried it and im not sure if it restored or not but it strated boot looping. I tried the flashing the pc10img.zip from the root of the sd card it usually says something like version to new or to old or something it didn't work. My phone is not rooted and i don't think usb debugging is on. Any info you guys want just ask. What can i do? How can i fix it? Please help
I'm going to take a guess, that if the battery connection to the motherboard 'broke off', then it's possible you have other physical issues such as the ribbon cable connecting the screen/digitizer to the rest of the phone.
If it were me I would have sent the phone into HTC for hardware warranty (which you can't do now since you soldered it.).
Can you provide some specific information about the phone, can you get into the boot loader, and if so what exact information do you have there? (USB debugging would be easily turned on under system settings, if you can get into it via the screen).
kbeezie said:
I'm going to take a guess, that if the battery connection to the motherboard 'broke off', then it's possible you have other physical issues such as the ribbon cable connecting the screen/digitizer to the rest of the phone.
If it were me I would have sent the phone into HTC for hardware warranty (which you can't do now since you soldered it.).
Can you provide some specific information about the phone, can you get into the boot loader, and if so what exact information do you have there? (USB debugging would be easily turned on under system settings, if you can get into it via the screen).
Click to expand...
Click to collapse
Thanks for replying i don't think anything else is wrong with the phone all the cables were fine. To begin with warranty was already finished. "Yes", i can get into the boot loader/H boot. I can turn on usb debugging because the phone doesn't boot all the way in to android. When you say information what exactly are you looking for?
helstonrampersad said:
Thanks for replying i don't think anything else is wrong with the phone all the cables were fine. To begin with warranty was already finished. "Yes", i can get into the boot loader/H boot. I can turn on usb debugging because the phone doesn't boot all the way in to android. When you say information what exactly are you looking for?
Click to expand...
Click to collapse
Mainly the info that shows up on hboot, and which recovery you have (or 'had') so that might be able to advise some additional steps.
helstonrampersad said:
Long story short my friend gave me a T mobile HTC G2 because it didn't turn on. I opened the phone to find the part where the battery connects to the phone came off the mother board so i solder it back on put the phone back together and turned it on. It booted up normal and came to the lock screen nothing worked the touch wasn't responding so i push power button to turn screen off and then again to turn it back on and the screen worked. I tried guessing his pattern five time and it didnt work it asked me to sign in to my Google account when the screen came up the phone rebooted and it kept doing it every time i turned it on. So i looked on xda how to restore it tried it and im not sure if it restored or not but it strated boot looping. I tried the flashing the pc10img.zip from the root of the sd card it usually says something like version to new or to old or something it didn't work. My phone is not rooted and i don't think usb debugging is on. Any info you guys want just ask. What can i do? How can i fix it? Please help
Click to expand...
Click to collapse
when you first had the phone it won't boot right? but when you tried fixing the battery connection thingy (sorry I don't know whats it called )
it booted and ran again?
have you tried doing a factory reset?
Power button+volume rocker down (volume down button) to boot into bootloader mode then do a factory reset maybe that would work ?
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
OR
or sending the phone to HTC would help bud but you have to pay them for that if they get to fix it you got yourself a new toy!
kbeezie said:
Mainly the info that shows up on hboot, and which recovery you have (or 'had') so that might be able to advise some additional steps.
Click to expand...
Click to collapse
This is the boot loader screen that i see
VISION PVT SHIP S-ON
HBOOT-0.82.0000
MICROP-26.13.04.19_M
eMMC-boot
Apr 13 211, 14:51:54
Im pretty sure the phone was never rootded before
The Android Manual said:
when you first had the phone it won't boot right? but when you tried fixing the battery connection thingy (sorry I don't know whats it called )
it booted and ran again?
have you tried doing a factory reset?
Power button+volume rocker down (volume down button) to boot into bootloader mode then do a factory reset maybe that would work ?
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
OR
or sending the phone to HTC would help bud but you have to pay them for that if they get to fix it you got yourself a new toy!
Click to expand...
Click to collapse
Its ok im not certain of what its called either but just to be sure its the part where the battery touches and it has metal prongs like. As for trying to restore it, i already tried didnt work it boot loops when i try that.
I don;t know what to do
helstonrampersad said:
Its ok im not certain of what its called either but just to be sure its the part where the battery touches and it has metal prongs like. As for trying to restore it, i already tried didnt work it boot loops when i try that.
Click to expand...
Click to collapse
ryin
sorry bro I'm no dev so I don't know that much when you were tryin to flash the "stock rom" did you flash the one for the G2 or the Desire Z?
The Android Manual said:
ryin
sorry bro I'm no dev so I don't know that much when you were tryin to flash the "stock rom" did you flash the one for the G2 or the Desire Z?
Click to expand...
Click to collapse
I still appreciate your help bro and i was trying to flash the stock rom for the g2, i made sure of it.
helstonrampersad said:
I still appreciate your help bro and i was trying to flash the stock rom for the g2, i made sure of it.
Click to expand...
Click to collapse
Would probably have to stick to the original Stock RUU update since you're S-ON (would need S-OFF for any kind of custom recovery, kernel, unsigned packages, etc), so would have to use a signed full package from T-Mobile, I don't know much bout that because I usually have my phones rooted and away from stock as fast as I can.
What stock rom did you find before? links?
kbeezie said:
Would probably have to stick to the original Stock RUU update since you're S-ON (would need S-OFF for any kind of custom recovery, kernel, unsigned packages, etc), so would have to use a signed full package from T-Mobile, I don't know much bout that because I usually have my phones rooted and away from stock as fast as I can.
What stock rom did you find before? links?
Click to expand...
Click to collapse
http://shipped-roms.com/index.php?category=android&model=Vision
Thats is the above link i used and i used all the ones that start with "PC10" I rename them to PC10IMG.zip so the phone can recognize it and it did. The only problem is that after it tries to install is say something along the lines of version is older or newer since i tried multiple packages. One package was going through the process and after that it didn't do anything, it didnt say failed or reboot or anything like that. Ive been trying to fix this for like a week and a half now. Ive even flashed custom PC10IMG.zip to see if it could help but nothing the furthest ive gotten is the phone boots for like 2 seconds the screen is blurry and the shuts off and there is an orange light in top right that wasn't lighting up before. Here are the links for the custom packages
http://forum.xda-developers.com/showpost.php?p=10583834&postcount=33
http://forum.xda-developers.com/showpost.php?p=10966727&postcount=63
Cant thank you enough for helping me this is really frustrating
kbeezie said:
Would probably have to stick to the original Stock RUU update since you're S-ON (would need S-OFF for any kind of custom recovery, kernel, unsigned packages, etc), so would have to use a signed full package from T-Mobile, I don't know much bout that because I usually have my phones rooted and away from stock as fast as I can.
What stock rom did you find before? links?
Click to expand...
Click to collapse
If what i explained above is not what you were referring to then let me know your way
helstonrampersad said:
If what i explained above is not what you were referring to then let me know your way
Click to expand...
Click to collapse
You would have to much it to your exact carrier/phone, Just flashing whatever you get your hands on can be very very risky.
For example for me being on T-Mobile with a T-Mobile branded G2, I would grab PC10IMG_Vision_TMOUS_1.19.531.1_Radio_12.21.60.09b_26.02.01.15_M2_release_149459_signed.zip from http://forum.xda-developers.com/showthread.php?t=971109
(noting the *.15 is the original radio my device was shipped with, though I've upgraded to the newer *.19)
I of course have no intention to returning to complete stock, but it's usually the only course of action for most people stuck with S-ON (and then would look into exploiting/unlocking/rooting again from there).
kbeezie said:
You would have to much it to your exact carrier/phone, Just flashing whatever you get your hands on can be very very risky.
For example for me being on T-Mobile with a T-Mobile branded G2, I would grab PC10IMG_Vision_TMOUS_1.19.531.1_Radio_12.21.60.09b_26.02.01.15_M2_release_149459_signed.zip from http://forum.xda-developers.com/showthread.php?t=971109
(noting the *.15 is the original radio my device was shipped with, though I've upgraded to the newer *.19)
I of course have no intention to returning to complete stock, but it's usually the only course of action for most people stuck with S-ON (and then would look into exploiting/unlocking/rooting again from there).
Click to expand...
Click to collapse
I know it can be risky but im desperate for a fix. Ill try the package you linked. I download it and rename it to PC10IMG.zip? Ill get back after im done if you have any other suggestion please let me know.
kbeezie said:
You would have to much it to your exact carrier/phone, Just flashing whatever you get your hands on can be very very risky.
For example for me being on T-Mobile with a T-Mobile branded G2, I would grab PC10IMG_Vision_TMOUS_1.19.531.1_Radio_12.21.60.09b_26.02.01.15_M2_release_149459_signed.zip from http://forum.xda-developers.com/showthread.php?t=971109
(noting the *.15 is the original radio my device was shipped with, though I've upgraded to the newer *.19)
I of course have no intention to returning to complete stock, but it's usually the only course of action for most people stuck with S-ON (and then would look into exploiting/unlocking/rooting again from there).
Click to expand...
Click to collapse
Im confused on which one to flash I have a T-Mobile HTC G2 which one will i flash?
choose the latest one for the g2, reading your thread I feel you will have little luck with this. try logging onto freenode #g2root, you'll get real time help here
Sent from my HTC Vision using xda premium
demkantor said:
choose the latest one for the g2, reading your thread I feel you will have little luck with this. try logging onto freenode #g2root, you'll get real time help here
Sent from my HTC Vision using xda premium
Click to expand...
Click to collapse
I am new to XDA how can i do that?
helstonrampersad said:
I am new to XDA how can i do that?
Click to expand...
Click to collapse
I'm new so I can't post links, but copy and paste this url: http://webchat.freenode.net/?channels=g2root
EDIT - Oh, I can post links.
eboy_gb said:
I'm new so I can't post links, but copy and paste this url: http://webchat.freenode.net/?channels=g2root
EDIT - Oh, I can post links.
Click to expand...
Click to collapse
Though ideally using an actual IRC client will work much nicer than a web chat one.
Same problem, but desire z S-ON
Hey guys.
I have the same problem with the boot loop /semi brick. Expect I never had any problem before, with the phone. I have tried taking out the sd card, starting it agian. I have tried without simcard. I have tried to flash the ROM with RUU_Vision_Gingerbread_S_HTC_WWE_2.42.405.2_Radio_12.56.60.25_26.10.04.03_M_release_199043_signed
via Hboot Fastboot USB PLUG mode (which was the only mode the aplication was progressing in until it want to restart the phone in bootloader), but the phone frezzes and the aplication on the computer just keep working, without progress.
The factory reset just frezzes the phone.
The only thing reali seem to not frezze the phone is the revocery option. Here the phone react with restart showing a image of a phone with two green arrows bent around, over the phone. then it turns off the display and vibrate 4-5 times, og stays turn off not reacting to anything other then taking out the battery and you can start the phone once again.
VISION PVT SHIP S-ON
HBOOT-0.85.0013
MICROP-26.10.04.19_M
eMMC-boot
Apr 11 2011, 23:36:27
Have no idea but the version of android. I know that usb debugging is NOT on Any hjelp is a big help. I'm a noob, And I have been searching for 3 days for a solution, so I just hope you can help my, otherwise it is going for a repair at the place I bought it.
Thanks

Categories

Resources