HI. Okay, so a couple weeks ago, I received a notification from HTC that said there was a new update available. Since I had S-Off and an unlocked bootloader (don't ask why, I just ****ing do.) I could not update, as it would give me errors, and cancel the update. So, earlier today I was fed-up with how slow my phone was being, and I wanted to fix it by updating. So I scoured XDA and found a thread about how to update by updating the HBoot or whatever. I followed those instructions and everything was fine, until I got to the initial part of installing the new **** through RUU. It was running fine, and then all of a sudden, the phone disconnected and ****ed the installation up. My battery was fully charged, and still has a charge as I am writing this. I digress. Whenever I would try to power my phone on, I would feel THREE (3) vibrations, and nothing would happen after. I tried booting into the stock recovery (fastboot, recovery, etc) and would still get THREE (3) vibrations. Bricked. So, I looked through a few threads on XDA, and found a few ways to fix it. Something about a Blind HBoot, or a Qualcomm Diagnostic Mode being stuck or something. Figured it was my best shot to try these. I tried them all. I put the PG76IMG.zip into my SD card, and booted up when holding Volume down, and only got THREE (3) vibrations. The tutorial said I was supposed to get FIVE (5) vibrations. So, I thought maybe it was something strange, and kept going through the tutorial. After five minutes, I'm supposed to press VOL UP, and should feel THREE (3) vibrations. Nothing happened. I waited and waited and tried again, and still, nothing. My phone is still lying here as a paperweight, and I want to get this working, so I can sell it because this phone is too much of a ****ing hassle for me. NOTHING HAS WORKED. ROMS, KERNELS, NOTHING. HAS. WORKED. I'M TIRED OF IT. I'm not a noob, I've been working with Android phones for a long time, and have never quite used an HTC device before. I had a Samsung Galaxy S Fascinate (CDMA) and it lost it's flash after I had moved to a different state. (The state I'm in does not have any towers for that carrier here.) SO. Can ANYONE give me a HIGHLY DETAILED tutorial, STEP BY STEP, to fix my phone?
HTC Wildfire S *Relocked* bootloader S-OFF CDMA METRO PCS.
I have tried everything I can find, and I have reached my wits end, man. Please, for the love of GOD, help me. I would really appreciate it.
I had 1000 rom flashes
3 Updates through RUU
Never had a brick
I hope someone can help you.
This is same as this thread http://forum.xda-developers.com/showthread.php?t=1522235
m1ndh4x8r said:
I had 1000 rom flashes
3 Updates through RUU
Never had a brick
I hope someone can help you.
This is same as this thread http://forum.xda-developers.com/showthread.php?t=1522235
Click to expand...
Click to collapse
I don't see how this helps me.
Help in the sense u have sent it to HTC for repair
Try this http://forum.xda-developers.com/showthread.php?t=1432425
Sent from my HTC_A510c using Tapatalk
kyleisah said:
HI. Okay, so a couple weeks ago, I received a notification from HTC that said there was a new update available. Since I had S-Off and an unlocked bootloader (don't ask why, I just ****ing do.) I could not update, as it would give me errors, and cancel the update. So, earlier today I was fed-up with how slow my phone was being, and I wanted to fix it by updating. So I scoured XDA and found a thread about how to update by updating the HBoot or whatever. I followed those instructions and everything was fine, until I got to the initial part of installing the new **** through RUU. It was running fine, and then all of a sudden, the phone disconnected and ****ed the installation up. My battery was fully charged, and still has a charge as I am writing this. I digress. Whenever I would try to power my phone on, I would feel THREE (3) vibrations, and nothing would happen after. I tried booting into the stock recovery (fastboot, recovery, etc) and would still get THREE (3) vibrations. Bricked. So, I looked through a few threads on XDA, and found a few ways to fix it. Something about a Blind HBoot, or a Qualcomm Diagnostic Mode being stuck or something. Figured it was my best shot to try these. I tried them all. I put the PG76IMG.zip into my SD card, and booted up when holding Volume down, and only got THREE (3) vibrations. The tutorial said I was supposed to get FIVE (5) vibrations. So, I thought maybe it was something strange, and kept going through the tutorial. After five minutes, I'm supposed to press VOL UP, and should feel THREE (3) vibrations. Nothing happened. I waited and waited and tried again, and still, nothing. My phone is still lying here as a paperweight, and I want to get this working, so I can sell it because this phone is too much of a ****ing hassle for me. NOTHING HAS WORKED. ROMS, KERNELS, NOTHING. HAS. WORKED. I'M TIRED OF IT. I'm not a noob, I've been working with Android phones for a long time, and have never quite used an HTC device before. I had a Samsung Galaxy S Fascinate (CDMA) and it lost it's flash after I had moved to a different state. (The state I'm in does not have any towers for that carrier here.) SO. Can ANYONE give me a HIGHLY DETAILED tutorial, STEP BY STEP, to fix my phone?
HTC Wildfire S *Relocked* bootloader S-OFF CDMA METRO PCS.
I have tried everything I can find, and I have reached my wits end, man. Please, for the love of GOD, help me. I would really appreciate it.
Click to expand...
Click to collapse
ok, im not saying i can get it going again but i`ll do my best to help. lets start from the beginning, what actually works atm? you say when you try boot up the phone in any way it just vibrates 3 times.
does it do anything else, does the screen light up?
does it even stay on?
when you connect it to the charger does the led still light up?
have you tried to connect it to the pc? have you tried to connect it too the pc with volume down first?
all seem very basic stuff obviously but if the pc can register it in hboot we might be able to get a ruu running on it.
Found this on a different thread...
Nevermind. Just realized you were still getting three vibrates. Sorry man. I'll keep an eye out if I see anything else that might help.
what is your hboot version? i was see 1.09.099 like in forum maybe you can start with update hboot.
you can use adb for all of this works. download a ruu and run it. after some steps you can find rom.zip in windows/temp extract it to a folder like c:\android\rom and use adb for install all *.img files. maybe it can fix that problem
hypercode said:
what is your hboot version? i was see 1.09.099 like in forum maybe you can start with update hboot.
you can use adb for all of this works. download a ruu and run it. after some steps you can find rom.zip in windows/temp extract it to a folder like c:\android\rom and use adb for install all *.img files. maybe it can fix that problem
Click to expand...
Click to collapse
seriously , adb can install img files ?!
Alright, well, I called htc and told them about my problem, and I might have to just send it in. BUT. I had my phone rooted, and had CM Recovery on it. So, since nothing is booting up at all, only the three vibrates when trying to enter either boot mode, will they be able to see that I had it rooted or anything? They said they'll charge 35$ just to ship it back in the same condition if it is. Can't really afford anything like that right now.
tl;dr I had my phone rooted, but nothing on my phone comes up, will they see my root or anything?
if you are rooted you are probably s-off or at least have unlocked bootloader. and both they will find out very easily.
Sorry for my bad it was fastboot.exe you can install .img files with fastboot.exe i was installed stock recovery with that
Sent from my HTC Wildfire S A510e using XDA App
Related
Hey guys, I tried to perma root my wife's G2 last night using Visionary+ r14 but when it tried to reboot it doesn't get past the green and white "HTC" screen, so now I have a couple of questions.
I bought this phone from someone off of Craigslist and it was working great until I tried to root it so it is technically out of warranty do you think I can get it replaced since everything is still stock?
Also I tried to apply the HTC OTA update to fix it and I still have the problem, is there anything I can do to repair this phone? Thanks in advance guys and mahalo!
Okay pull your battery out and put it back in..after dat press power button and volume down button until you get to the recovery screen and do a factory reset..
Sent from my HTC Vision using XDA App
Thanks for the reply jboiii15. I did a factory reset before I flashed the OTA update and I have factory reset several times but still no go. I appreciate you taking the time to help me out.
Did you try this? http://forum.xda-developers.com/showthread.php?t=842495
aznsnake666 said:
Did you try this? http://forum.xda-developers.com/showthread.php?t=842495
Click to expand...
Click to collapse
I haven't tried it because I can't get ADB to work with the phone the way it is, Fastboot works but ADB just shows nothing there while I'm in recovery or the boot screen. Thank you also for the reply. My wife is pissed lol.
Try to extract the ROM from the official RUU and rename it to PC10IMG.zip. Put this on the root of your SD card and boot into bootloader and leave it to work. This should solve your problem Fingers Crossed
JD
do you have s-off??
I don't have S-OFF as I just started the rooting procedure when it decided to take a dump on me, after this I don't think my wife will want me to root any more of her phones although I know she'll miss it after having a rooted G1 running CM and a rooted Slide running Chromatic. Good thing I didn't sell her Slide yet lol.
I'll try to find information on the PC10IMG.zip method now and see what can be done.
Thank you guys for all the help, I really appreciate it all.
itsmekeoni said:
I don't have S-OFF as I just started the rooting procedure when it decided to take a dump on me, after this I don't think my wife will want me to root any more of her phones although I know she'll miss it after having a rooted G1 running CM and a rooted Slide running Chromatic. Good thing I didn't sell her Slide yet lol.
I'll try to find information on the PC10IMG.zip method now and see what can be done.
Thank you guys for all the help, I really appreciate it all.
Click to expand...
Click to collapse
I think the rooting process has corrupted your kernel or rom, it is rare to get a brick from just the visionary process, but i know there has at least been one that this has happened to.
Report back to tell us if the extracted ROM worked for you, there is still hope;')
JD
Oh man this is just getting worse lol. I had the phone sitting here plugged into my laptop while the phone was in the Hboot screen where you can select Fastboot, Recovery and so on. All of a sudden my here Windows give off the noise as if something was connected or disconnected from my computer and I see the screen shut off on the G2 with a red light blinking. Now the phone doesn't power on and the red light blinks while the phone is plugged into the computer but doesn't power on.
As I was typing this the red light came on solid as if it is charging now, maybe it doesn't charge while in that screen and the battery just died I dunno, strange.
JupiterDroid said:
I think the rooting process has corrupted your kernel or rom, it is rare to get a brick from just the visionary process, but i know there has at least been one that this has happened to.
Report back to tell us if the extracted ROM worked for you, there is still hope;')
JD
Click to expand...
Click to collapse
Well I called T-Mobile and they are sending out a new phone, I'm unsure if I should still mess with it or not. I did flash the TMOUSA OTA update and that didn't help, I didn't unpack it to see if it contained a new Kernel but I'm sure it had a new system.img, still think it is one of those that is messed up?
I'm having a hard time finding the things to get the PC10IMG.zip going, work is calling me in different directions and my A.D.D is kicking in lol.
try this http://forum.xda-developers.com/showthread.php?t=855764 i had the same problem like you, steviewevie told me to do it, if you have problem to connect your g2 with sdk download pda net, it works for me and now i have my g2 back with the new root... just do what it said on that link believe me works...
P.D. I am a androidnoober always have a iphone and this was my first time using sdk adb or whatever name is and I did it
Thanks AndroidNoober, I've seen that link in my search for an answer to my problem. One of the issues that is making this harder is that after the phone "bricked" it lost ADB connectivity. I've tried it on two computers that have a properly working ADB (I test it with my N1 and 3G Slide) and it used to work with the G2 but now I can't get it to see the phone, I've heard Recovery has ADB blocked.
semi bricked attempting permaroot
i attempted permaroot and semi bricked my phone. will not boot past htc screen. i can't get adb to work. i am trying to get pdanet installed but it keeps getting stuck on installing on phone. can it install while phone is in recovery mode? i have had no sucess trying to figure this out on my own and phone is not covered with a warranty
i have gotten the phone to read an update.zip file.
it is reading the pc10img.zip as well.
now i just have to get past the htc screen.
i do have s-on as i had just started the process.
any help would be appreciated
Hi guys, Well after trawling through the wealth of information on this site and reading till my eyes bleed I honestly cant seem to fix this.
I was hoping and preying some amazingly talented expert here could maybe point me in the right direction.
Ok so heres whats going on. Got my HTC Desire, Told me there was a system update. So I chose to install ofcourse. Then BAM! for no reason half way through installation the phone dies. Vibrates 7 times and black screen (Searched this too) - nothing.
So pulled battery, waited for a few minutes and put in, power on. Phone gets to HTC (white screen) the freezes. Or even sometimes just switches off and vibrates 7 times again!
So I found An RUU for 3 mobile - RUU_Bravo_H3G_UK_1.22.771.1_Radio_32.36.00.28U_4.06.00.02_2_release_127568_signed
Tried running it with the phone in fastboot usb
All was going well then reached about 80% and gave me an error code 110. Telling me to download a complete RUU for my device.
Now when I power on the screen is just black, however I know it still has some functionality as I can hear the sound for device connection in Windows when I Power on holding down Vol-
now I thought I would be clever and seeing as whilst my phone was working it downloaded the "correct" update. So checked the sd card and found it in the Downloads folder. Renamed it to PB99IMG and tried booting the phone holding down the back key. But still nothing.
By the way the phone isnt rooted and is very very very new. On 3 mobile UK network.
Can anybody please give me some pointers on how I may be able to go about fixing this? Im sure there has to be some way as it still has "some functionalty" (I think lol)
Also tried the adb method of connecting or re-flashing but device is not found.
Cheers all
Sounds like the RUU is corrupt - what is the file size?
Also, is that the one your Desire came with? If not, that won't work anyway
Also, an OTA shouldn't be named PB99IMG as that's only for RUU files - you rename an OTA update.zip and flash it in recovery. Looks like you've not read enough
Hi, thanks for the quick reply.
The RUU I tried installing that failed was from:
http://forum.xda-developers.com/showthread.php?t=695667
RUU_Bravo_H3G_UK_1.22.771.1_Radio_32.36.00.28U_4.06.00.02_2_release_127568_signed.exe
Filesize is 153mb. It matched the version number that my htc shipped with and even says when running the RUU that both versions are the same. But as it failed I tried the Update from my network provider that I found on the SD card by renaming to PB99IMG.zip and holding Back and Power down.
Looks like Im buggered I suppose. Im still trying to get my phones CID as Im guessing then I can install any RUU for my phone?
I just cant access anything to get the CID
The PB99IMG can ONLY be used when extracting it from an RUU
The one you got OTA (Over The Air) isn't a full ROM - it's just a 30MB-odd update
Download the RUU from here:
http://www.4shared.com/get/t2SsuYNF...sionid=2D4E782FB44E2CF020622A15F76C1A5A.dc278
(Shipped-ROMs.com can lead to corrupt downloads)
And then follow the guide I attached to this post - it's how to extract the PB99IMG from an RUU:
http://forum.xda-developers.com/showpost.php?p=10509780&postcount=102
Thank you so much! Will try now and let you know how it goes.
Thanks again
Still no good. Its tricky as I cant see the screen to select the options. But Ive followed the guide allowing it enough time to load before choosing yes etc and still no joy. Im not even sure the PBIMG99.zip is loading.
I've even tried running the RUU again from the PC after Holding vol - and Power down and waiting for the sound in windows that its connected. But gives me error code 110 again saying it cannot read files.
Loos like Im going to have to send it back to my supplier. Although Im sure they will blame me for everything and refuse me a new handset! lol
Once you have the correct PB99IMG file, you copy it onto the root of the SD card (not in any folders) and then turn the phone on holding volume down. You don't have to do anything else as it'll find the file and ask if you want to use it
To try the RUU turn the phone on holding the BACK button to get into FASTBOOT, connect to the PC and when it says FASTBOOT USB on the screen of the phone run the RUU
Out of interest, when you boot into HBOOT when info do you see at the top of screen?
Thats the problem. My screen is blank. I used to be able to get into Hboot and fastboot and see the screen. Now I dont see anything. But Im sure its still going into hboot etc as I hear the connection sound windows makes when holding vol and power.
Hope that makes sense?
Edit. I do know that before all went wrong I had hboot 93 or something like that.
Right, sounds like you've flashed a ROM for an AMOLED Desire onto an SLCD one...
Oh! poooooooh. Well thanks for trying. I never even got to use the stupid thing! lol
There is a thread on here to try and use to sort it out - look through the Q&A section
have u fixed it please ?? I got the same problems now......
thx
SK
vyeshaun said:
Hi guys, Well after trawling through the wealth of information on this site and reading till my eyes bleed I honestly cant seem to fix this.
I was hoping and preying some amazingly talented expert here could maybe point me in the right direction.
Ok so heres whats going on. Got my HTC Desire, Told me there was a system update. So I chose to install ofcourse. Then BAM! for no reason half way through installation the phone dies. Vibrates 7 times and black screen (Searched this too) - nothing.
So pulled battery, waited for a few minutes and put in, power on. Phone gets to HTC (white screen) the freezes. Or even sometimes just switches off and vibrates 7 times again!
So I found An RUU for 3 mobile - RUU_Bravo_H3G_UK_1.22.771.1_Radio_32.36.00.28U_4.06.00.02_2_release_127568_signed
Tried running it with the phone in fastboot usb
All was going well then reached about 80% and gave me an error code 110. Telling me to download a complete RUU for my device.
Now when I power on the screen is just black, however I know it still has some functionality as I can hear the sound for device connection in Windows when I Power on holding down Vol-
now I thought I would be clever and seeing as whilst my phone was working it downloaded the "correct" update. So checked the sd card and found it in the Downloads folder. Renamed it to PB99IMG and tried booting the phone holding down the back key. But still nothing.
By the way the phone isnt rooted and is very very very new. On 3 mobile UK network.
Can anybody please give me some pointers on how I may be able to go about fixing this? Im sure there has to be some way as it still has "some functionalty" (I think lol)
Also tried the adb method of connecting or re-flashing but device is not found.
Cheers all
Click to expand...
Click to collapse
The thread Eddy referred to, was probably this..You should be able to do it even if blindfolded
Alright. For starters, xda has been VERY VERY helpful to me over the past few months and I thank everyone who has ever contributed to a question or a discussion I have read. That being said, this is my first post. I watched the newb video, read many forums (both xda and others), google searched, read some more threads, kept reading threads, tried some methods described in some threads, bookmarked some interesting threads for if my phone ever works again, and read some more threads.
I am not saying the answer is not already out there, I am saying I have reached my resourcefulness cap.
Anyway, to the root of the problem: I'm not entirely new to rooting, and am comfortable using recovery and hboot to flash roms. I also had a nandroid backup! for SOME SILLY reason, while in my clockworkmod recovery this morning (maybe slightly due to being half asleep which is why I now recommend being fully awake before entering hboot or recovery or rom manager....etc) I formatted the system on my phone. I THINK.
My phone will now load up to display the bootloader, and go into recovery mode, and flash roms, but when I flash a rom, nothing changes. If I boot my phone up, it will show a notification bar at the top like usual, a stock wallpaper, and that is IT! it will show a message notification and missed call icon since I have them, but the touch screen will not work. The rosie buttons at the bottom do not show up (i.e. phone button or all aps button) no apps appear, no clocks except for in the notification bar... hardkeys have no effect (home button search button menu or back) and volume keys will not work. The lock button will only lock and unlock the screen, not power off or reboot or anything. If plugged in at this point, it is charger only.
So, I can take the micro sd card out and put files on it from my PC via a microsd-usb converter thing...
I have tried putting new roms on the sd and flashing them from recovery, no effect. Tried the RUU_Supersonic_1.32.651.1_Radio_1.39.00.04.26_release_171253.exe program, it always says that my phone has below 30% battery and will not continue (this is not the case as I have two batteries both have been fully charged because the phone will still charge them...)
And I have tried putting PC36IMG.zip files on my sd card to no avail.
I am thinking that the system was wiped because it seems like there is no boot image on the phones internal memory itself. I am currently looking for a way to place a boot image on the sd card to possibly flash it or some sort of update.zip so that my bootloader will ask me to update upon reading it.
Sorry for the long post, and ask any questions I will answer as best I can.
I am posting preemptively to the boot image adventure so that if it does not work, maybe I can have some help finding a solution by then.
I was going to take my evo to the sprint store since it is under warranty but if they go into recovery they will see clockworkmod recovery.
Thanks to all for any form of guidance!
I did just notice in my Bootloader menu (HBOOT-2.10.0001) that it says Supersonice evt2-3 **** S-ON
I don't know how because I thought it was a requirement that it says S-OFF to be rooted and flash roms, but I have definitely flashed roms before and gained su access to applications and such. BUT since it says S-ON would it then be covered by the warranty if it is not rooted?
Thanks again.
I you want to flash a boot image, you can take the boot.img from an RUU for the firmware you are, place it in your adb tools folder, then flash it using the commands:
fastboot flash boot boot.img
fastboot reboot
I'm not sure how to identify what firmware I am. Unless your talking about the Hboot version? and also, I can't place anything in any folder except onto my sd card. I have no access other than that to the phone. On the sd card there are no files except for what I put on there.
...aaand not to mention I don't know what adb is exactly...
Does your phone still go to clockwork when you go to recovery?
Am going to try it right now, but will that work if I cannot tell my phone to allow usb debugging? i remember something about unrevoked needing that to root the phone in the first place. will update as soon as I try it. May not have time right now as I have to leave in about 15 mins. If no reply by 9:45, then I will be back online tomorrow morning. and thanks!
Timeconsumer10 said:
Am going to try it right now, but will that work if I cannot tell my phone to allow usb debugging? i remember something about unrevoked needing that to root the phone in the first place. will update as soon as I try it. May not have time right now as I have to leave in about 15 mins. If no reply by 9:45, then I will be back online tomorrow morning. and thanks!
Click to expand...
Click to collapse
Welcome, but yes, you do need to have had usb debugging enabled, so we'll see how that goes.
SUPER THANKS! S-OFF tool worked perfectly just flashed a rom and now so far so good. Will post tomorrow to let you know if everything works well. So much appreciated =) I would thanks a million times if i could don't know what to do without my evo.
Timeconsumer10 said:
SUPER THANKS! S-OFF tool worked perfectly just flashed a rom and now so far so good. Will post tomorrow to let you know if everything works well. So much appreciated =) I would thanks a million times if i could don't know what to do without my evo.
Click to expand...
Click to collapse
Lol, it'd take you 200,000 days since you can only thank 5 times a day Though glad you're rooted now.
shortydoggg said:
Does your phone still go to clockwork when you go to recovery?
Click to expand...
Click to collapse
Yes it still goes to clockwork because its rooted.. now my screen legitimately does not work in certain areas of the screen (not responding to touch) so I'm going to try and get it stock stock stock unrooted and go for warranty replacement. Any ideas please let me know. Currently trying RUU Supersonic...
So, I got an ERROR [110] message from the RUU package its a file open error... :/ now i dont know what is up. Says I need a complete RUU package. Looking for another one or another option now.
If i boot phone normally now it just goes to a black screen with "htc" in the middle and "!" in a triangle in all four corners. Can't do anything from that screen.
If I boot into bootloader once where it says SHIP S-OFF at the top and instead of recovery and all those options it just says RUU but you cant do anything there... :/ I now, however cannot even get to the bootloader screen.
Could they tell it is rooted?
Maybe I could say I finally decided to do sprints OTA update that I've been denying for a while and this is the result.
Anyone agree disagree?
COCLUSION!
So. Since it has just the HTC logo and four error icons one in each corner... I took it into a sprint repair store. It would not boot into bootloader as a hard reset, so the guys at the store were stumped. They had actually never seen this before =). They asked me if I rooted it and all so I just played dumb. I told em I didn't know what that really was. They kinna explained it and I told em I didn't even have a computer (not a lie actually I sold mine and now use my dads or gfs lol). The logo on the screen was an oooold htc logo from like hero or so. So they just put it in the system as a wont even turn on type of thing and gave me a new phone since I was under warranty =) gonna see if I can live without root juuust for a little bit because work and school are gonna keep me busy for a while. I am certain to return though!
Can't wait to see what the devs can do by then!
Thanks to all for the help!
I need help repairing my dinc. First, let me apologize for the long post, but I wanted to provide as much detail as possible.
My cousin dropped his phone in water and tried to dry it off. I don't know if he tried to turn it on after drying it off. Also, I don't know what attempts he has made to bring the phone back to life, but he has given up and handed the phone over to me. He figured since I am an IT guy and also do hardware repairs I would figure it out.
This is new to me because I've never owned a Smartphone before. He turned off his service on the dinc and used another Verizon phone he had lying around.
I've research different forums for a fix for the past few days, but nothing has worked. I’ve seen posts with similar symptoms, but in all cases they were able to get more functionality from their phone than mine. Also, my issue is related to water and not from a bad ROM upgrade. Here's a summary of things I've already tried:
Dried the phone out with the rice in Ziploc bag trick for 3 days (phone is completely dried)
Reformatted the micro sd card to fat32
Did a system update
Placed PB31IMG.zip into the root of the sd card
md5 checksum: 31bb1611a0fa8197d447c0438426717e
When I remove or rename the PB31IMG.zip file and hold the down button+power, here is the outcome for the following:
Fastboot: Gives me the following options Bootloader, Reboot, Reboot Bootloader, & Power Dwn
Bootloader takes me back to the main HBoot screen.
Reboot would get me stuck on a continuous loop (stuck on the "HTC Incredible" white screen) and freeze
Reboot Bootloader just takes me back to the Fastboot menu
Power Dwn would do the same thing as the Reboot
Recovery: does the same thing as Reboot; it would freeze at the white "HTC Incredible" screen
Clear Storage: does the same thing as above
Factory Reset: does the same thing as above
Each time it gets stuck at the white HTC Incredible boot up screen, I would have to pull the battery. Hitting/holding the power button doesn't seem to do anything.
From what I've been reading, I don't think the phone is bricked, since it still turns on, has limited functions, & I can get to the HBoot screen. The only thing I haven’t tried is reinstalling the OS (not sure if the OS is included in the PB31IMG.zip file)? Also, I was going to try to reformat the hard drive (just in case the partition is damaged).
The phone has never been rooted and I am not trying to root/unroot the phone... just trying to repair the phone. The phone has the S-ON.
I have uploaded a 10 min. YouTube video so you can see what I'm dealing with. Any help would be much appreciated. If there is anything you want me to try or anything you want to know that I may have left out, please don't hesitate to ask. At this point, I'm willing to try anything.
www(dot)youtube(dot)com/watch?v=gHXDJl6G2X4
Sorry, I can't post a link to my video so just replace the (dot) with a "."
You need to do an ruu with a PB31IMG.zip.
You can get the ruu here http://pvillecomp.com/?page_id=22
If you ever want to be able to root you need to use the froyo one as gingerbread cant be rooted if your s-on. Just download, rename exactly PB31IMG.zip, place on your sdcard in no folders, make sure its not connected to a computer, then pull battery and replace then boot into hboot (vol down + power) it should automaticly find the file after a couple secs and then prompt you to press vol up to install. Once its done you will be promptet to reboot , do so and if all is as expected you should boot up normally. Note that the first boot will take a long time so be patient, it may seem like it freezes at the boot animation but give it time.
cmlusco said:
You need to do an ruu with a PB31IMG.zip.
You can get the ruu here pvillecomp(dot)com/?page_id=22
If you ever want to be able to root you need to use the froyo one as gingerbread cant be rooted if your s-on. Just download, rename exactly PB31IMG.zip, place on your sdcard in no folders, make sure its not connected to a computer, then pull battery and replace then boot into hboot (vol down + power) it should automaticly find the file after a couple secs and then prompt you to press vol up to install. Once its done you will be promptet to reboot , do so and if all is as expected you should boot up normally. Note that the first boot will take a long time so be patient, it may seem like it freezes at the boot animation but give it time.
Click to expand...
Click to collapse
I ran the RUU program, which took about 10 min to complete. When it finished the update process, it rebooted the dinc, but I'm now stuck on the white htc incredible screen as demonstrated in my video. How long I'm I suppose to wait as this white screen? It seems as if it's frozen, but I'm not sure. Am I missing something?
Should I rerun it or try to run the PB31IMG.zip file? BTW, I grabbed the PB31IMG.zip file from the same site from your link.
HiJacK69 said:
I ran the RUU program, which took about 10 min to complete. When it finished the update process, it rebooted the dinc, but I'm now stuck on the white htc incredible screen as demonstrated in my video. How long I'm I suppose to wait as this white screen? It seems as if it's frozen, but I'm not sure. Am I missing something?
Should I rerun it or try to run the PB31IMG.zip file? BTW, I grabbed the PB31IMG.zip file from the same site from your link.
Click to expand...
Click to collapse
Have you done a logcat?
HiJacK69 said:
I ran the RUU program, which took about 10 min to complete. When it finished the update process, it rebooted the dinc, but I'm now stuck on the white htc incredible screen as demonstrated in my video. How long I'm I suppose to wait as this white screen? It seems as if it's frozen, but I'm not sure. Am I missing something?
Should I rerun it or try to run the PB31IMG.zip file? BTW, I grabbed the PB31IMG.zip file from the same site from your link.
Click to expand...
Click to collapse
So your saying you did the ruu exe with your pc and it compleeded sucessfully?
dmeadows013 said:
Have you done a logcat?
Click to expand...
Click to collapse
No, I haven't. Can you please explain what this is and how it's done? I'm assuming this will pull up the syslog on the phone?
cmlusco said:
So your saying you did the ruu exe with your pc and it compleeded sucessfully?
Click to expand...
Click to collapse
Yes, but let me explain. When I first turned on my phone it would freeze at the white htc incredible screen. The pc would not recognize the device. The HTC Sync program would also not recognize the device.
I pulled the battery and did pushed the down button+power to get the HBoot. Then I would plug in the usb cable and the device is still not recognized. I would have to select the fastboot option, then bootloader a few times before the ruu program can detect my phone. HTC Sync would still not detect my phone.
After the phone is recognized by ruu I ran the program. I can see a black screen on my phone with big white HTC letters. Then I would see a green scan bar running. The ruu program completed and the phone rebooted. I hit the "finished" button on the ruu program and exit.
The phone rebooted and got stuck on the white htc incredible screen. I waited for 15 mins and it's still stuck on the same screen. If you watch my video, you can see exactly what I'm talking about. I've tried re-running the PB31IMG.zip file, but it's not working.
Any other ideas? You think the partition is damaged or the phone is bricked?
Ok I watched the video. My only other sugestion would be to try and root it with unrevoked so you can get the custom recovery, wipe everything from in recovery, and then try flashing a custom rom such as jermains rooted gingerbread+ rom. If that dosent work i would say there is some type of hardware failure.
cmlusco said:
Ok I watched the video. My only other sugestion would be to try and root it with unrevoked so you can get the custom recovery, wipe everything from in recovery, and then try flashing a custom rom such as jermains rooted gingerbread+ rom. If that dosent work i would say there is some type of hardware failure.
Click to expand...
Click to collapse
When I root it with Unrevoked, can I use the online method where I log on to their site or does matter?
Can I still root the phone even though HTC Sync does not recognize my phone? Yeah, someone from another forum suggested it might be a hardware issue from the water. If my cousin turned the phone on while it was still wet, he could have shorted out some circuits on the motherboard. I told him what he should do if it ever happened to him next time.
Thanks for helping me out!
HiJacK69 said:
When I root it with Unrevoked, can I use the online method where I log on to their site or does matter?
Can I still root the phone even though HTC Sync does not recognize my phone? Yeah, someone from another forum suggested it might be a hardware issue from the water. If my cousin turned the phone on while it was still wet, he could have shorted out some circuits on the motherboard. I told him what he should do if it ever happened to him next time.
Thanks for helping me out!
Click to expand...
Click to collapse
I wasnt aware there was an online method. I'm not sure if unrevoked will work or not but i know you have to uninstall htc sync before you use the downloadable method. Its a pretty simple process and worth a shot. Hardware failure is verry possible though, especially if it was turned on wile still wet. Even if it wasnt turned on wet it probably got droped in the water wile on possibly causing a short right away.
cmlusco said:
I wasnt aware there was an online method. I'm not sure if unrevoked will work or not but i know you have to uninstall htc sync before you use the downloadable method. Its a pretty simple process and worth a shot. Hardware failure is verry possible though, especially if it was turned on wile still wet. Even if it wasnt turned on wet it probably got droped in the water wile on possibly causing a short right away.
Click to expand...
Click to collapse
That's my bad; it's like 2am now and I was thinking about something else. I had to download the unrevoked3 program and run it. You're right, I had to uninstall htc sync. I was unable to use the program because it wanted me to enable usb debugging mode, which I am not able to do with my phone in its current state. It could not detect my device.
Someone from another forum stated that after watching my video, he noticed that the image I flashed contained a VZ radio. He said he's heard of cases where users were waiting up to 2 hours in the htc incredible screen before the update is complete. This seems like a very long time, but I'm willing to try.
He wanted me to make sure my phone is fully charged. Then he wants me to run the update in the bootloader and just let it sit. He says it may take up to 2 hours. He said if it doesn't work then it's a hardware related issue caused by the board getting shorted out.
Thanks for all your help!
HiJacK69 said:
No, I haven't. Can you please explain what this is and how it's done? I'm assuming this will pull up the syslog on the phone?
Click to expand...
Click to collapse
You need to have adb installed. If you don't, google how and there are many in depth tutorials. Then, once adb is installed, cd to your adb directory in terminal/command prompt and type ./adb logcat.
Yes I have searched and no I have not solved my problem so I decided to post here after accidentally posting in the Incredible thread.
I flashed the wrong RUU and now my phone will only vibrate three times no matter what I do. I have tried holding the buttons as described, 3 vibes. Pulled the battery and held all different combinations of buttons while plugging in, 3 vibes.
I can not get 5 vibes out of my phone.
I have made a goldcard, 3 vibes, no love.
Any other suggestions? VM support are full of stupid people that can't seem to realize I have three phones so they keep saying my issue is resolved and I can't understand half of them anyway. wish I spoke Indian, maybe we could communicate.
Any help is greatly appreciated at this point. I am very savy computer wise and have been able to root my LG Elite and unbrick my LB OV but this on is really getting me.
Thanks ahead of time.
1-Take an appropriate RUU
2-Run it on the computer
3-Just as the first screen occurs close the setup
4-Go to the temp folder (%temp% in run) and searh for a zip file named "rom"
5-Take that file out,rename it "PG76IMG.zip"
6-Put it on the root of the SDcard(no folders)
7-Power on your phone while holding the Volume down button
8-After some time you will feel some vibes........press volume up then
9-Hopefully your phone will boot after 20-30 minutes
csoulr666 said:
1-Take an appropriate RUU
2-Run it on the computer
3-Just as the first screen occurs close the setup
4-Go to the temp folder (%temp% in run) and searh for a zip file named "rom"
5-Take that file out,rename it "PG76IMG.zip"
6-Put it on the root of the SDcard(no folders)
7-Power on your phone while holding the Volume down button
8-After some time you will feel some vibes........press volume up then
9-Hopefully your phone will boot after 20-30 minutes
Click to expand...
Click to collapse
I really wanna know if it worked. Cause it means we can fix bricked phone without jtag.
finance.resat said:
I really wanna know if it worked. Cause it means we can fix bricked phone without jtag.
Click to expand...
Click to collapse
It's not bricked. It's in Qualcomm diagnostics mode.
finance.resat said:
I really wanna know if it worked. Cause it means we can fix bricked phone without jtag.
Click to expand...
Click to collapse
The phone isn't bricked. I think 3 vibes means it is in Qualcomm Diagnostics mode. You'd still need a jtag for a bricked phone.
Well guys I'm learning. thanks for correctING me
I'm a noob:banghead::banghead::banghead::banghead::banghead:
rwperkinsjr said:
Yes I have searched and no I have not solved my problem so I decided to post here after accidentally posting in the Incredible thread.
I flashed the wrong RUU and now my phone will only vibrate three times no matter what I do. I have tried holding the buttons as described, 3 vibes. Pulled the battery and held all different combinations of buttons while plugging in, 3 vibes.
I can not get 5 vibes out of my phone.
I have made a goldcard, 3 vibes, no love.
Any other suggestions? VM support are full of stupid people that can't seem to realize I have three phones so they keep saying my issue is resolved and I can't understand half of them anyway. wish I spoke Indian, maybe we could communicate.
Any help is greatly appreciated at this point. I am very savy computer wise and have been able to root my LG Elite and unbrick my LB OV but this on is really getting me.
Thanks ahead of time.
Click to expand...
Click to collapse
You can try this method:
If you have made a correct Gold Card and put the correct PG76IMG.zip file on it, then;
1: Take your battery out.
2: Put the battery back.
3: Press and Hold BOTH Volume UP and Volume DOWN then the Power Button.
Now wait to see it the PG76IMG.zip will load.
Didn't work need Goldcard?
No it didn't work, I never get 5 vibes and I am having a heck of a time getting a goldcard made without the phone. Sorry it took so long to reply I guess I wasn't being sent messages or they went to my spam folder one of the two.
So now here I am, I worked on trying t get a goldcard made and the thing fixed for hours last night, went through every tutorial I could find and nothin, still in the same 3 vibe mode. :crying:
I tried everything from using an LG that I have to looking up more Goldcard tools than I can even remember. Every time I would maje the card whether through the HEX edit method or tools that say they will make it for you they failed. When inserted into the computer they all said they need formatted and if inserted into a phone I would get a damaged sd-card notice.
I am totally at a loss here and ready to give up. Funny that I have been able to repair both the LG's that I have (Elite and V) at least back t working order and have even been able to make progress on the NVram thing I was having problems with on the Elite without even posting about it but not this HTC when it sounds so easy. How stupid for HTC to require some goldcard thing anyway.
I have now turned on instant email notifications so if anyone out there has any idea what I am doing wrong I would really appreciate the help.
Thanks!
I hate those dang image verification things! Grrr....
At a loss
I have tried everything I can find all over the internet. Is this phone just done?
I finally got a goldcard made using linux. Looked at the stock RUU's available from HTC and tried the Virgin Mobile for Marvel and the Sprint for marvelc. Phone never does anything expect vibrate three times no matter how I try to start it or what RUU I use. I have extracted the rom.zip out of each and renamed it to PG76IMG.zip. I just don't know what I am doing wrong. I see other people that have fixed this problem and I know I can too.
I keep seeing that the phone should vibrate five times after it verifies the image but I never have been able to get it to do that.
If any of you have actually fixed this problem personally can you please tell me your exact steps and any way I can verify what is happening, I'm getting really tired of this. I don't know what the heck to try next.