Usb debugging -enabled,drivers on pc installed.(wont show in hardware though)..but i still cant see the tablet on my pc >Any ideas as to what to try next ?
Tab s doesn't support mass storage mode. Only MTP and PTP.
mordeith said:
Usb debugging -enabled,drivers on pc installed.(wont show in hardware though)..but i still cant see the tablet on my pc >Any ideas as to what to try next ?
Click to expand...
Click to collapse
My SkyHigh kernel does using Synapse
ashyx said:
Tab s doesn't support mass storage mode. Only MTP and PTP.
Click to expand...
Click to collapse
ashyx said:
Tab s doesn't support mass storage mode. Only MTP and PTP.
Click to expand...
Click to collapse
well it used to just pop up like all my other tabs...when i plugged it in,..now im at a loss as to what the heck i did to break that feature
mordeith said:
well it used to just pop up like all my other tabs...when i plugged it in,..now im at a loss as to what the heck i did to break that feature
Click to expand...
Click to collapse
You may just need to reinstall the usb drivers, check the tablet is detected in device manager.
gotta wrest my laptop back from the kid,and see if its just this pc(just rebuilt,and fresh install),or,tablet..drivers have been installed,tablet isnt even showing in devmanager(it charges though)...
Related
i have rooted wildfire s (marvel).from somedays i have mass storage problem in my device.like when i connected to my laptop its not detected my sdcard.and also it didnt detect htc sync.if i on usb debugging then my device ll show mass storage.and i have stock rom 2.3.5
so please help me to solve problem.i did all things like reseting phone,format sdcard and all things.i have many other phones but only this android couldnt detected please help
crossfire77 said:
i have rooted wildfire s (marvel).from somedays i have mass storage problem in my device.like when i connected to my laptop its not detected my sdcard.and also it didnt detect htc sync.if i on usb debugging then my device ll show mass storage.and i have stock rom 2.3.5
so please help me to solve problem.i did all things like reseting phone,format sdcard and all things.i have many other phones but only this android couldnt detected please help
Click to expand...
Click to collapse
Go To Settings>Connect To PC> Default Action>Set It to Mass Storage>Untick Ask Me Option
Press Thanx If I Helped
fireworker said:
Go To Settings>Connect To PC> Default Action>Set It to Mass Storage>Untick Ask Me Option
Press Thanx If I Helped
Click to expand...
Click to collapse
not working
First of all check the wire and port. Maybe something is loose?
Second: Go to device manager, does it find the phone there? If it does, right click on it and select uninstall. Then disconnect the device and reboot. When it's rebooted attach the device again.
sukhjit321 said:
First of all check the wire and port. Maybe something is loose?
Second: Go to device manager, does it find the phone there? If it does, right click on it and select uninstall. Then disconnect the device and reboot. When it's rebooted attach the device again.
Click to expand...
Click to collapse
not working
crossfire77 said:
not working
Click to expand...
Click to collapse
Does it show in device manager?
sukhjit321 said:
Does it show in device manager?
Click to expand...
Click to collapse
yeah it shows in device manager as "usb mass storage" but its not shows me my memory card in computer.when i on usb debugging then it ll mount sd card.and if i choose htc sync there comes a error.
fail to mount/unmount device storage card(1020).
in all cases i have to on usb debugging then it ll show me my device.
.
So I got my Nexus 7 2013 to work perfectly on my laptop, which runs Windows 7 x64. However, on my desktop, which also runs Win7 x64, I only have the ADB working correctly for the N7. As I recall, sometimes there is a device under Device Manager called "D:/", which is non-descriptive, but seems like the closest thing to the N7. I have tried to update this mysterious device's drivers by pointing to Google's USB drivers and the OEM drivers, but neither was accepted. There are also no devices with missing drivers listed in Device Manager.
At this point, I am not sure how to proceed. Is there a precise way identify under what device name/category the N7 shows up in Device Manager? Please advise. :fingers-crossed:
See if this helps:
http://forum.xda-developers.com/showthread.php?t=2391236
Cool, I'll give this a try in a bit.
zeppelin101 said:
Cool, I'll give this a try in a bit.
Click to expand...
Click to collapse
I cant get Nexus 7 to show has folder when check in MTP mode. it will show as camera folder PTP. Any solutions to this problem? very frustrating!
mickrg123 said:
I cant get Nexus 7 to show has folder when check in MTP mode. it will show as camera folder PTP. Any solutions to this problem? very frustrating!
Click to expand...
Click to collapse
Make sure USB Debugging is disabled, device is plugged in, and go to device manager in windows. Then right click on nexus 7 or android adb device, or any similar name. Then after uninstalling everything, unplug device and replug it in. Let windows get the drivers, and MTP should work!
fevanson said:
Make sure USB Debugging is disabled, device is plugged in, and go to device manager in windows. Then right click on nexus 7 or android adb device, or any similar name. Then after uninstalling everything, unplug device and replug it in. Let windows get the drivers, and MTP should work!
Click to expand...
Click to collapse
Thats my problem it doesn't when trying this.
mickrg123 said:
Thats my problem it doesn't when trying this.
Click to expand...
Click to collapse
get this and delete anything related to google and adb.
http://www.nirsoft.net/utils/usb_devices_view.html
fevanson said:
get this and delete anything related to google and adb.
http://www.nirsoft.net/utils/usb_devices_view.html
Click to expand...
Click to collapse
Deleted everything related to google and nexus. Still installs as adb device but doesnt show as nexus 7 device! Wug fresh has this program in its tool kit
It might sound dumb, but I was literally just having this issue. But apparently certan roms or kernel disable MTP mode when they are installed. i reinstall every driver just now. My fix was as easy as going to Settings > Storage > Menu Button Top right > Enable MTP box.
tonu42 said:
It might sound dumb, but I was literally just having this issue. But apparently certan roms or kernel disable MTP mode when they are installed. i reinstall every driver just now. My fix was as easy as going to Settings > Storage > Menu Button Top right > Enable MTP box.
Click to expand...
Click to collapse
What kernal or rom are you running?
---------- Post added at 10:10 PM ---------- Previous post was at 10:02 PM ----------
mickrg123 said:
What kernal or rom are you running?
Click to expand...
Click to collapse
Going to try a custom rom see if that works!
I have tried a number of the suggestions in this thread, including the deletion of all my google/adb/nexus (and samsung) drivers. None of these steps resolved my problem. However, at the end of the day, I can still use both ADB and MTP, just not at the same time. So it's not a big deal. I think I will mess around with Tasker and/or get a widget for turning ADB on/off.
Are you ale to get a nexus 7 device to show so you can access internal storage? I can only access camera storage.
mickrg123 said:
Are you ale to get a nexus 7 device to show so you can access internal storage?
Click to expand...
Click to collapse
Yea, that's what MTP is.
zeppelin101 said:
Yea, that's what MTP is.
Click to expand...
Click to collapse
That's my problem I can't access mtp.
mickrg123 said:
Are you ale to get a nexus 7 device to show so you can access internal storage? I can only access camera storage.
Click to expand...
Click to collapse
Are you running stock?
If so, do you have USB debugging turned on?
If you have USB debugging turned on, the USB IDs change and it might not (depending on what you have previously installed) recognize the MTP device anymore.
If you turn off USB debugging, it should recognize MTP.
Now if you are on a custom ROM, there might be some issues on the ROM side causing the MTP problem. Try going back to stock and see if it works.
If you are on stock and have the case where MTP only works with USB debugging disabled, then you can try this driver inf I put together to address that.
It is available in this thread:
http://forum.xda-developers.com/showthread.php?t=2391236
Hey does anyone know if the note 3 can get into mass storage mode and if so how would you go about doing it...thanks for any help....
re: usb connect modes
rockinandroid said:
Hey does anyone know if the note 3 can get into mass storage mode and if so how would you go about doing it...thanks for any help....
Click to expand...
Click to collapse
To change modes plug the usb cable from phone to computer and pull the pulldown down
and you will see "connected as a media device" click on it and will be able to change it to
"Camera PTP" or "Media Device MTP". (Media device PTP is mass storage mode)
Be sure that you have the latest samsung usb drivers installed in your computer.
If you don't have it installed or if you don't see the options then that means that
either the usb drivers are not installed or the usb cable or the usb port is not
functioning properly.
Good luck!
Misterjunky said:
To change modes plug the usb cable from phone to computer and pull the pulldown down
and you will see "connected as a media device" click on it and will be able to change it to
"Camera PTP" or "Media Device MTP". (Media device PTP is mass storage mode)
Be sure that you have the latest samsung usb drivers installed in your computer.
If you don't have it installed or if you don't see the options then that means that
either the usb drivers are not installed or the usb cable or the usb port is not
functioning properly.
Good luck!
Click to expand...
Click to collapse
Doing that makes it show up as a camera. Which is fine I guess, but probably just for applications on the computer that don't know how to read MTP. Neither is actually USB Mass Storage though.
Either will let you copy files to/from the device in Windows. OSX seems to need MTP and the little application Google makes available.
When people ask about UMS, they usually want to connect to something that's not a computer, like a car radio that can play music/video from a flash stick. Those devices won't support MTP/PTP. I am not aware of any way to get normal UMS to work on a Note3. Last I heard, people determined that a kernel mod needed to happen, and even if that does, the device might get angry if you take its storage away as it won't expect that. The external could probably be done without too much hassle, but the internal would be weird. And probably won't work anyway as it's an ext4 format, so only Linux devices could mount it anyway.
I just cannot find a way to transfer files or discover my 5x in mtp mode.. Using the latest USB drivers..
Any help? Thnx
Sent from my Nexus 5X using Tapatalk
EnIXmA said:
I just cannot find a way to transfer files or discover my 5x in mtp mode.. Using the latest USB drivers..
Any help? Thnx
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
This is sometimes a bit finnicky. Try changing to PTP instead of MTP. If that doesn't work, enabled Android Debugging. For some odd reason, Windows 10 wouldn't discover the storage on my HTC One M9 unless I enabled debugging from the developer settings menu.
Alcolawl said:
This is sometimes a bit finnicky. Try changing to PTP instead of MTP. If that doesn't work, enabled Android Debugging. For some odd reason, Windows 10 wouldn't discover the storage on my HTC One M9 unless I enabled debugging from the developer settings menu.
Click to expand...
Click to collapse
I've tried everything that you suggested... and I'm still having the same problem as the OP.
Did you open the notification that appears on your phone after you connect it to the pc and select mtp?
How about just using a USB OTG memory with Type-C connector, something like this...
http://www.amazon.com/WEme-Type-C-MacBook-Devices-Surface/dp/B013OIGJFE/
Yea MTP nor PTP didn't work. What I did was plug it in and wait for it to show up in device manager. Then I deleted the device from device manager. Then I unplugged the device and plugged it back in... Then waited for drivers to install on it's own. Everything was good after that.
Hello,
I have a problem with my Note 2 (N7100).
When I connect my Note 2 (N7100) to my Laptop, its not connected as a media device, it takes charge only. I can't see the internal storage or memory card as a external device, also not connected in download mode in odin.
Please anyone help me solve the issue.
Thanks in Advance.
Regards.
sadique2804 said:
Hello,
I have a problem with my Note 2 (N7100).
When I connect my Note 2 (N7100) to my Laptop, its not connected as a media device, it takes charge only. I can't see the internal storage or memory card as a external device, also not connected in download mode in odin.
Please anyone help me solve the issue.
Thanks in Advance.
Regards.
Click to expand...
Click to collapse
Are you using a custom ROM....
Anyway after connecting your phone you should see a notification on the bar that says USB for charging, click on that and tap on the second option, USB for media transfer
Anymore suggestion
Vishal Vignesh said:
Are you using a custom ROM....
Anyway after connecting your phone you should see a notification on the bar that says USB for charging, click on that and tap on the second option, USB for media transfer
Click to expand...
Click to collapse
Thanks anyway
but nothing shows as a notification in status bar or anywhere else.
And in both roms Stock or custom, problem is same, otherewise I am using custom rom (Eclipse by AC).
sadique2804 said:
Thanks anyway
but nothing shows as a notification in status bar or anywhere else.
And in both roms Stock or custom, problem is same, otherewise I am using custom rom (Eclipse by AC).
Click to expand...
Click to collapse
OK, go to developer options, there will be an option called, select USB configuration....
Connect your phone to your PC and click the option and select media device
Vishal Vignesh said:
OK, go to developer options, there will be an option called, select USB configuration....
Connect your phone to your PC and click the option and select media device
Click to expand...
Click to collapse
Not found USB configuration
USB Debugging is checked
Does your computer detect your phone on USB debugging
Vishal Vignesh said:
Does your computer detect your phone on USB debugging
Click to expand...
Click to collapse
No
Not Detecting a phone nor a beep.
Even Samsung USB driver is installed.
sadique2804 said:
No
Not Detecting a phone nor a beep.
Even Samsung USB driver is installed.
Click to expand...
Click to collapse
Try using another USB cable on another port on your computer....
Type the problem in the forum of your rom...
They can help you better.....
Thanks buddy
Vishal Vignesh said:
Try using another USB cable on another port on your computer....
Type the problem in the forum of your rom...
They can help you better.....
Click to expand...
Click to collapse
3 Different types of cables in 3 different ports including USB 3.0 port
and also tried in another laptop.
same cables and laptops works perfect for other android phones.
btw its not the rom issue
service menu configuration in phone
maybe its qualcomm usb configuration