Confused about rooting with T999UVUEOH1
ok
If the phone is running a stock 4.3 Samsung ROM, the phone will have knox. Best thing to do would be to run OTA updates until the phone is running the latest ROM. This will ensure that the phone has the most recent bootloader and modem.
Once updated, you can easily root the phone by flash TWRP for the d2tmo via Odin. After installing TWRP, you can flash supersu 2.45 or 2.46 via TWRP and have root access.
Note that flashing TWRP will trip the knox counter.
Ok
The method I recommended should not cause any loss of data. To be safe, always backup before flashing anything.
Is there any warranty left on the phone? If not, tripping knox isn't going to matter.
Any attempts to downgrade the bootloader may result in a bricked phone.
Looks like the root66 method involves flashing a prerooted stock ROM. If you want to try the root66 method, just make sure the root66 ROM's bootloader and modem are the same or newer than the phone's version. If the phone has oh1, I would not use the root66 method.
Ok
Flashing TWRP and supersu from TWRP is the easiest in my opinion.
Just make sure to get the tar version of TWRP to flash in Odin.
audit13 said:
Flashing TWRP and supersu from TWRP is the easiest in my opinion.
Just make sure to get the tar version of TWRP to flash in Odin.
Click to expand...
Click to collapse
Nahh!! The easiest way is use TowelRoot
Only need to press a button! I'm using that firmware so I CONFIRM that it's working
I guess it depends on the rom. It wouldn't work on stock 4.4.2 for me.
The kernel was patched against Towelroot in 4.4.2. We were never updated past 4.3 so it should work fine.
Sent from my SGH-T999 using Tapatalk
Related
So I recently used CF Autoroot to root my T-Mobile GS3 SGH-T999 and I heard that if you try to downgrade to android versions before 4.3 your phone will be hard bricked. So with my knox counter tripped I was wondering can I flash a rom that is on 4.2.2 I want to flash the MIUI rom. Thanks in advance.
You can flash any custom Rom via Custom Recovery. Nothing bad will happen as they have only Rom and Kernel.
However just never flash Pre-4.3 Samsung firmwares via Odin. Those contain the older bootloader. If you tried to flash older bootloader, you get hardbrick.
Perseus71 said:
You can flash any custom Rom via Custom Recovery. Nothing bad will happen as they have only Rom and Kernel.
However just never flash Pre-4.3 Samsung firmwares via Odin. Those contain the older bootloader. If you tried to flash older bootloader, you get hardbrick.
Click to expand...
Click to collapse
Thanks for the answer been wanting to try MIUI for so long was scared of hard brick
Quxus said:
So I recently used CF Autoroot to root my T-Mobile GS3 SGH-T999 and I heard that if you try to downgrade to android versions before 4.3 your phone will be hard bricked. So with my knox counter tripped I was wondering can I flash a rom that is on 4.2.2 I want to flash the MIUI rom. Thanks in advance.
Click to expand...
Click to collapse
I know to get rid of the trip count I used triangle away. I installed, opened the app, followed the set up, reboot and count was back to zero.
hey guys,
I need help asap! I tried using the video on this website to root my tmobile S4. I downloaded Kies, Odin 3.07, ROOT_M919UVUAMDL.zip, and CWM as recovery-clockwork-touch-6.0.3.2-jfltetmo.tar, I did NOT install triangle away( i forgot). I went through the steps and passed in Odin. then, when I pulled the battery and booted in CWM i couldnt find the file so i went to the store to buy a sdcard. when I came home i re-ran through Odin and found the root zip on the external sdcard. I successfully installed the root zip and clicked reboot. my problem arose when it showed a "KERNEL IS NOT SEANDROID ENFORCING" in red, and a "SET WARANTY BIT: KERNEL" in yellow. it seems to be frozen in this screen and i can only use the CWM and Download mode. I have tried re-using Odin .
Please help!!
That's an old root method. You can either
1) flash a custom ROM and go about your business
2) Odin back to stock firmware and root with cf-auto root or towelroot
Sent from my SGH-M919 using Tapatalk
serio22 said:
That's an old root method. You can either
1) flash a custom ROM and go about your business
2) Odin back to stock firmware and root with cf-auto root or towelroot
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
I'm sorry, I'm a Noob. but 1) where can I get a custom ROM and how do i apply it? 2) can you elaborate on your #2?
scott560 said:
I'm sorry, I'm a Noob. but 1) where can I get a custom ROM and how do i apply it? 2) can you elaborate on your #2?
Click to expand...
Click to collapse
1) You can find tons of Custom ROMs here: http://forum.xda-developers.com/galaxy-s4-tmobile/development
You usually flash them to your phone via a Custom Recovery such as CWM or TWRP. Or, is some cases you can use ODIN. Read, Read, Read, Read before your flash. It is very easy to do, but you need to understand what you are doing. All Custom ROMs come pre-rooted.
2) You can download a stock ROM from here:
http://www.sammobile.com/firmwares/
Or, you can use Kies to download and install the most recent firmware for your phone.
TowelRoot is a new option for rooting stock ROMs that are version 4.4.2 (KitKat). This method of rooting doesn't trip the Knox flag.
Here's a video: https://www.youtube.com/watch?v=ZGwMs8JPBhE
Rob
rlichtefeld said:
1) You can find tons of Custom ROMs here: http://forum.xda-developers.com/galaxy-s4-tmobile/development
You flash them to your phone via ODIN. Read, Read, Read, Read before your flash. It is very easy to do, but you need to understand what you are doing. All Custom ROMs come pre-rooted.
2) You can download a stock ROM from here:
http://www.sammobile.com/firmwares/
Or, you can use Kies to download and install the most recent firmware for your phone.
TowelRoot is a new option for rooting stock ROMs that are version 4.4.2 (KitKat). This method of rooting doesn't trip the Knox flag.
Here's a video: https://www.youtube.com/watch?v=ZGwMs8JPBhE
Rob
Click to expand...
Click to collapse
Thanks for replying however, you do not flash custom ROMs via Odin, you need a custom recovery like twrp or cwm.. Stock firmware you do flash via Odin.. And their Knox flag is already tripped, wouldn't matter
serio22 said:
Thanks for replying however, you do not flash custom ROMs via Odin, you need a custom recovery like twrp or cwm.. Stock firmware you do flash via Odin.. And their Knox flag is already tripped, wouldn't matter
Click to expand...
Click to collapse
Thanks for correcting me that most of the time you flash Custom ROMs via a Custom Recovery on the S4.
But, if I'm not mistaken you can flash Custom ROMs via ODIN as long as in the right format and you select the correct partition.
However, most of my Custom ROM history is with a HTC device, so I may be mistaken.
rlichtefeld said:
Thanks for correcting me that most of the time you flash Custom ROMs via a Custom Recovery on the S4.
But, if I'm not mistaken you can flash Custom ROMs via ODIN as long as in the right format and you select the correct partition.
However, most of my Custom ROM history is with a HTC device, so I may be mistaken.
Click to expand...
Click to collapse
It is possible but 99% of custom ROMs are not made to be flashed with Odin, in the past two years I've only seen about 1. And it is also inconvenient
I rooted my dad's phone a while back ago so he can use tethering in case of emergencies etc. He recently got a smart watch and I wanted to updated it so that he can use it. But it has not been touched since that day. I essentially want rooted stock rom, I'm unaware of where to find that the closest I can find is StockMod kitkat. Which seems to not work on ATT phones? I just want to make sure that I don't brick his only phone on christmas. So is there something I should be aware of?
His model is SGH-i747
Baseband
i747UCDLK3
Build number
jro03
So how do I go about upgrading it? Can I just flash TWRP and flash any rom using TWRP?
I found this, so I should install new TWRP, then flash a specified kernel then flash rom? would this be safe route?
Some of the latest ROMs require a 4.4.2 bootloader and modem.
The simplest and safest way to get the latest bootloader may be to flash back to unrooted stock 4.1.1 and run OTA updates until the phone is running the latest KK ROM. You can then flash TWRP or CWM and a custom ROM.
audit13 said:
Some of the latest ROMs require a 4.4.2 bootloader and modem.
The simplest and safest way to get the latest bootloader may be to flash back to unrooted stock 4.1.1 and run OTA updates until the phone is running the latest KK ROM. You can then flash TWRP or CWM and a custom ROM.
Click to expand...
Click to collapse
Would this require flashing with ODIN? I just want it so that it works with root is not required anymore.
Yes, you would flash the 4.1.1 stock ATT ROM via Odin. I prefer Odin 3.07.
You cannot install OTA updates with root.
You can try flashing just the bootloader and modem but I prefer the long slow route of OTA updates.
I rather do it this way, manually so my dad can enjoy it today. I was wondering how can I update it's TWRP? it's at 2.3 but the TWRP manager keeps crashing when I update it.
I highly recommend the latest d2lte version of Philz Touch for recovery.
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/
Ok I ****ed up, flash that kernel and did whatever and bam ****ed up. Not working... ****, I still ahve download mode and Recovery but it will not boot into the OS. I get a flash of samsung and then nothing else happends...****
I decided to flash stock DLK3 in odin. Then let the updates take it course (my dad doesn't need root) Where Can I find the file?
The stock ATT firmware is on sammobile.com.
If you want root, OTA to the latest 4.4.2, install Philz, flash supersu via recovery.
Hi everyone.
Is there any way to root the Note 2 N7100 on Samsung official firmware Kitkat without tripping Knox. ??
My bootloader is ND4
My baseband is ND3
My PDA is ND4
If there is a safe method, what is it ...
I tried TR but got that my device is not supported.
My Knox is 0x0
If there isn't & I must trip Knox to root, so what's the best & safest method for rooting my N7100?? My warranty is gone long time ago anyway.
And if I'm gonna trip Knox so I prefer to have a custom recovery, what should I use? I thought of TWRP but found some complaining that 2.8.6 caused loss of signal... What should I use??
One more question, please.
Will rooting my phone & tripping Knox prevent future OTA update to the long awaited official Samsung Lollipop??
If the answer is yes is there a way around it ?? Will I be able to flash it by Odin after getting it from any where like Sammobile ?
Sorry for being long & Thanks
zoghrob said:
Hi everyone.
Is there any way to root the Note 2 N7100 on Samsung official firmware Kitkat without tripping Knox. ??
My bootloader is ND4
My baseband is ND3
My PDA is ND4
If there is a safe method, what is it ...
I tried TR but got that my device is not supported.
My Knox is 0x0
If there isn't & I must trip Knox to root, so what's the best & safest method for rooting my N7100?? My warranty is gone long time ago anyway.
And if I'm gonna trip Knox so I prefer to have a custom recovery, what should I use? I thought of TWRP but found some complaining that 2.8.6 caused loss of signal... What should I use??
One more question, please.
Will rooting my phone & tripping Knox prevent future OTA update to the long awaited official Samsung Lollipop??
If the answer is yes is there a way around it ?? Will I be able to flash it by Odin after getting it from any where like Sammobile ?
Sorry for being long & Thanks
Click to expand...
Click to collapse
Just root it as posted in sticky thread.
You don't have warranty, so just don't bother. Use odin, root and install recovery, then rom.
You can flash stock rom via odin if you want, you can install custom roms via recovery.
I'm using TWRP for 2 years and never had any problem. You can also use Philz. For normal user it doesn't really matter.
yaro666 said:
Just root it as posted in sticky thread.
You don't have warranty, so just don't bother. Use odin, root and install recovery, then rom.
You can flash stock rom via odin if you want, you can install custom roms via recovery.
I'm using TWRP for 2 years and never had any problem. You can also use Philz. For normal user it doesn't really matter.
Click to expand...
Click to collapse
Thank you very much for your help.
Actually I found no sticky threads for rooting 4.4.2. Most of the sticky threads are dating since 2012 with 4.1.2 & 4.3.
However by searching I found 2 threads for 4.4.2, one of them is
http://forum.xda-developers.com/showthread.php?t=2767604
This one uses CF-auto-root... but no mention about any custom recovery. Will I lose root or mess things up if I install TWRP after that??
The other thread is
http://forum.xda-developers.com/showthread.php?t=2730764
This one uses the typical steps that I know, custom recovery then SuperSU. But it uses Philz recovery. Can I substitute it with TWRP??
Thank you for your help & patience.
The most important question: Why do you want to root?
If you like to flash a custom rom no need for root, any custom recovery - TWRP or CWM - flashed with Odin will do.
Androidwizzard said:
The most important question: Why do you want to root?
If you like to flash a custom rom no need for root, any custom recovery - TWRP or CWM - flashed with Odin will do.
Click to expand...
Click to collapse
I'm not planning to flash custom rom right now, may be later.
I want to root to be able to use some apps that require root. Plus, having full control over my phone.
In odin you have option to choose recovery file - AP.
After flashing recovery just install superSU via recovery.
DO a backup of your device and EFS before you flash anything.
yaro666 said:
In odin you have option to choose recovery file - AP.
After flashing recovery just install superSU via recovery.
DO a backup of your device and EFS before you flash anything.
Click to expand...
Click to collapse
Thank you for your help.
I don't know how to make a backup without recovery. So I flashed TWRP 2.8.6, took a backup then installed SuperSU via TWRP.
All went well except that I lost the signal and IMEI.
I found that I flashed TWRP t03gup while I should flashed t03g.
I reflashed the correct file then flashed the modem.bin of XXUFND3.
Everything thing is back to normal again except 2 things:
The icon of my service provider shifts place to the last app page after reboot, no matter where I place it...
The phone status shows custom (expected) but stays so even after using Triangle Away.
Is it better if I flash the stock firmware then recovery then SuperSU? ?? Or flashing the modem as I did was enough to straighten things up? ?
Thank you for your patience and help.
zoghrob said:
Thank you for your help.
I don't know how to make a backup without recovery. So I flashed TWRP 2.8.6, took a backup then installed SuperSU via TWRP.
All went well except that I lost the signal and IMEI.
I found that I flashed TWRP t03gup while I should flashed t03g.
I reflashed the correct file then flashed the modem.bin of XXUFND3.
Everything thing is back to normal again except 2 things:
The icon of my service provider shifts place to the last app page after reboot, no matter where I place it...
The phone status shows custom (expected) but stays so even after using Triangle Away.
Is it better if I flash the stock firmware then recovery then SuperSU? ?? Or flashing the modem as I did was enough to straighten things up? ?
Thank you for your patience and help.
Click to expand...
Click to collapse
It should be OK just as it is now, but if you have 30min free time, you can flash stock, root, custom rom with full wipe to make sure you have everything straighten up
yaro666 said:
It should be OK just as it is now, but if you have 30min free time, you can flash stock, root, custom rom with full wipe to make sure you have everything straighten up
Click to expand...
Click to collapse
30 min or even an hour is ok by me...
I'll do it right away. Flash stock, TWRP recovery then root with SuperSU.
As for the custom rom it'll have to wait as I didn't make up my mind which Lollipop to get... I'm kinda confused about it very much. I can't decide which to get.
I'm open for suggestions. lol
Thanks a million for your support.
If you need your phone for business don't flash lollipop. Still in beta phase, so bugs are occuring often.
I use dr. ketan's V14 and it's the most stable rom I have used
yaro666 said:
If you need your phone for business don't flash lollipop. Still in beta phase, so bugs are occuring often.
I use dr. ketan's V14 and it's the most stable rom I have used
Click to expand...
Click to collapse
My phone is for personal use not for business.
But I think I'll follow your advice & give Dr. Ketan's V14 a try.
I did flash stock firmware then flashed TWRP 2.8.6 (correct file this time.. lol) then installed root.
I did backup my phone & EFS by TWRP. All is excellent now.
Now I'll backup my contacts, sms, apps & data using Titanium back up then go for Dr. ketan's rom.
Wish me luck.
Thanks.
you will be positively surprised if youhad stock the whole time.
cheers
salute
yaro666 said:
you will be positively surprised if youhad stock the whole time.
cheers
salute
Click to expand...
Click to collapse
Wow... it's awesome. ..
Thumbs up. ..
You are right.
I'm wondering right now how did I stuck to the stock firmware all the past time.
Thanks.
Hi,
Am on CM12.1, T-Mobile Galaxy S4 SGH-M919, Rooted, Android 5.1.1
How i can update the Baseband - From M919Uvufnk2 To M919Uvufoh3 using TWRP?
You can't. You have to use Odin.
HampTheToker said:
You can't. You have to use Odin.
Click to expand...
Click to collapse
Ok, i can use ODIN. But from where i can find the baseband for rooted custom ROM (CM) SGH-M919?
My method...Backup your current rom. Odin the oh3 stock release, odin cf root, odin twrp, backup the new stock rom, restore prior backup.
Sent from my SM-T320 using XDA Premium HD app
mgp53 said:
My method...Backup your current rom. Odin the oh3 stock release, odin cf root, odin twrp, backup the new stock rom, restore prior backup.
Sent from my SM-T320 using XDA Premium HD app
Click to expand...
Click to collapse
Hmmm...thats what i am actually thinking as of now....but looking for easy alternative like if we get the flashable zip or something of this baseband i can just flash it without taking backup of ROM and reinstall the ROM etc.....
But am looking for a site where i can download these basebands....
i take it you are trying to update the modem/baseband ihere you go. Must be done thru odin.
http://forum.xda-developers.com/galaxy-s4-tmobile/general/foh3-modem-bin-mdl-bootloader-t3191094
IMPORTANT: DO NOT CHANGE THE BOOTLOADER unless u KNOW EXACLY what you are doing...changing bootloader to the wrong bootloader will brick your device and some modem packages conatin bootloader. so make sure that you are getting a ODIN file that only contains the modems and no bootloader!
if you wish to properly update the bootlaoder and baseband properly ....just ODIN the OFFICIAL samsung release for your device and then re-root and reinstall recovery and then your rom.
XeoNoX said:
i take it you are trying to update the modem/baseband ihere you go. Must be done thru odin.
http://forum.xda-developers.com/galaxy-s4-tmobile/general/foh3-modem-bin-mdl-bootloader-t3191094
IMPORTANT: DO NOT CHANGE THE BOOTLOADER unless u KNOW EXACLY what you are doing...changing bootloader to the wrong bootloader will brick your device and some modem packages conatin bootloader. so make sure that you are getting a ODIN file that only contains the modems and no bootloader!
if you wish to properly update the bootlaoder and baseband properly ....just ODIN the OFFICIAL samsung release for your device and then re-root and reinstall recovery and then your rom.
Click to expand...
Click to collapse
Perfect....I will use this one....
And on S4 you don't even need to root before flashing TWRP and your ROM of choice. Just double flash the stock release with ODIN, let it boot up and make sure all is well, go into Camera to let it see if it needs a firmware update (happens automatically first time you run stock camera app), and when satisfied your phone is good, go into download mode, take TWRP + whatever else you want.