Develop Bugs

[Q] MJ9 bootloader and knox

I got a new note 2 in india with latest android 4.3. It apparently has MJ9 bootloader. Is it that I cannot install a custom rom on this at the moment? I tried installing through ODIN but it failed and the phone showed the message "unsupported version". Then I had to recover using Kies.
Please let me know the current solution available.
Thanks!!

nishanta2006 said:
I got a new note 2 in india with latest android 4.3. It apparently has MJ9 bootloader. Is it that I cannot install a custom rom on this at the moment? I tried installing through ODIN but it failed and the phone showed the message "unsupported version". Then I had to recover using Kies.
Please let me know the current solution available.
Thanks!!
Click to expand...
Click to collapse
You can do any customization on your phone like a normal phone, but customizing it means that you have triggered the KNOX counter to 1. Thus on a stock rom you can never use KNOX if KNOX reads 1.
FYI the MK4 (bootloader) or MJ9 (babseband version) has blocked installation of any custom roms on our n7100s via odin. You cannot even downgrade to 4.1.2 official via odin, So flashing via recoveries is the only way left.
And also it is recommended that you install custom roms via Philz/TWRP/CWM recoveries to flash custom roms and everything.
Hope the lil knowledge helped.

DeepankarS said:
You can do any customization on your phone like a normal phone, but customizing it means that you have triggered the KNOX counter to 1. Thus on a stock rom you can never use KNOX if KNOX reads 1.
FYI the MK4 (bootloader) or MJ9 (babseband version) has blocked installation of any custom roms on our n7100s via odin. You cannot even downgrade to 4.1.2 official via odin, So flashing via recoveries is the only way left.
And also it is recommended that you install custom roms via Philz/TWRP/CWM recoveries to flash custom roms and everything.
Hope the lil knowledge helped.
Click to expand...
Click to collapse
Thanks, but I would need ODIN to install recovery also right (remember its a new phone so dont have a recovery installed)....would that be possible?...considering knox just blocks out odin

Yes ....damn
DeepankarS said:
You can do any customization on your phone like a normal phone, but customizing it means that you have triggered the KNOX counter to 1. Thus on a stock rom you can never use KNOX if KNOX reads 1.
FYI the MK4 (bootloader) or MJ9 (babseband version) has blocked installation of any custom roms on our n7100s via odin. You cannot even downgrade to 4.1.2 official via odin, So flashing via recoveries is the only way left.
And also it is recommended that you install custom roms via Philz/TWRP/CWM recoveries to flash custom roms and everything.
Hope the lil knowledge helped.
Click to expand...
Click to collapse
You right here .... i try it all to make the downgrade ...only with custom revovery .... i manage to downgrade ....

The last phils ...
nishanta2006 said:
Thanks, but I would need ODIN to install recovery also right (remember its a new phone so dont have a recovery installed)....would that be possible?...considering knox just blocks out odin
Click to expand...
Click to collapse
You can flash the last phils ... i attcheed to this post ....is working without problems on PDA ... odin
or mirror

[Q] Plz Help 4.3 down to 4.1.2. rooted tried a few

So I'm by no means super knowledgable with this stuff but I've rooted a few phones, played around with CM on my old evo but for the most part I enjoy rooted stock.
I have Galaxy S3 Sprint 4.3 updated OTA from a rooted (4.1.2). When I took the OTA I lost root, no big deal I used Odin and flashed the CF auto root, it said it removed knox and I had root back. Cool!
In short 4.3 sucked, wanted to downgrade back so things like TrevE mod would work again and it wouldn't be so buggy. I tried to use odin to flash "KIES_HOME_L710VPBMD4_L710SPRBMD4_1130792_REV03_user_low_ship.tar.md5" but it gave me the "Use Kies Recovery and error occured" message.
So I then used odin and flashed TWRP and my phone booted.
I'm back on 4.3 rooted.
I've tried picking through the forums and interwebz for answers but I get mixed messages and info on international versions and what not.
I'm tired of trying to figure it out and really could use some help downgrading back to 4.1.2
Thanks,
Brandon

mentorkyrom said:
So I'm by no means super knowledgable with this stuff but I've rooted a few phones, played around with CM on my old evo but for the most part I enjoy rooted stock.
I have Galaxy S3 Sprint 4.3 updated OTA from a rooted (4.1.2). When I took the OTA I lost root, no big deal I used Odin and flashed the CF auto root, it said it removed knox and I had root back. Cool!
In short 4.3 sucked, wanted to downgrade back so things like TrevE mod would work again and it wouldn't be so buggy. I tried to use odin to flash "KIES_HOME_L710VPBMD4_L710SPRBMD4_1130792_REV03_user_low_ship.tar.md5" but it gave me the "Use Kies Recovery and error occured" message.
So I then used odin and flashed TWRP and my phone booted.
I'm back on 4.3 rooted.
I've tried picking through the forums and interwebz for answers but I get mixed messages and info on international versions and what not.
I'm tired of trying to figure it out and really could use some help downgrading back to 4.1.2
Thanks,
Brandon
Click to expand...
Click to collapse
The 4.3 OTA installed a locked bootloader, which will prevent you from ODIN'ing back to a previous version. you can flash any ROM you would like from recovery, you CANNOT downgrade the bootloader. As of right now, if you have knox, you are stuck with it.
You are extremely lucky that you didn't brick your phone by using odin to flash a non-4.3 tar. I wouldnt try again.
My advice is, remain rooted with a custom recovery, and find a ROM to your liking, and flash that.
I have also heard that we cannot flash custom kernels on the knox (MK3) bootloader as well, but I havent verified that.

eletendre84 said:
The 4.3 OTA installed a locked bootloader, which will prevent you from ODIN'ing back to a previous version. you can flash any ROM you would like from recovery, you CANNOT downgrade the bootloader. As of right now, if you have knox, you are stuck with it.
You are extremely lucky that you didn't brick your phone by using odin to flash a non-4.3 tar. I wouldnt try again.
My advice is, remain rooted with a custom recovery, and find a ROM to your liking, and flash that.
I have also heard that we cannot flash custom kernels on the knox (MK3) bootloader as well, but I havent verified that.
Click to expand...
Click to collapse
Thank you for the response. Is CyanogenMod an option then? If I go to CM could I flash back a stock 4.3 rom in the future?
As an added bonus question does CM allow wifi tethering?
Again thank you for the response.

mentorkyrom said:
Thank you for the response. Is CyanogenMod an option then? If I go to CM could I flash back a stock 4.3 rom in the future?
As an added bonus question does CM allow wifi tethering?
Again thank you for the response.
Click to expand...
Click to collapse
CM is certainly an option. In fact, its what i am running now. CM11 12-24. Runs great. You can always odin the stock mk3 tar and go back to stock unrooted, at any time.
in order to flash cm11 you MUST be on TWRP 2.6.3.1 or CWM 6.0.4.5 or newer or the assert check will fail.
not sure on the tethering, but im pretty sure it definitely works on cm10.2 and i think it does on 11 as well, but dont quote me on that.

eletendre84 said:
CM is certainly an option. In fact, its what i am running now. CM11 12-24. Runs great. You can always odin the stock mk3 tar and go back to stock unrooted, at any time.
in order to flash cm11 you MUST be on TWRP 2.6.3.1 or CWM 6.0.4.5 or newer or the assert check will fail.
not sure on the tethering, but im pretty sure it definitely works on cm10.2 and i think it does on 11 as well, but dont quote me on that.
Click to expand...
Click to collapse
Tethering is available on CM11 just like it was on 10.2; would strongly recommend latest Philz Touch Recovery over either TWRP or CWM though. Although it is based on CWM, it has proven to be pretty much the superior recovery option for flashing any Android build number, plus it is highly customizable.
Philz Touch Recovery

this is how to downgrade
mentorkyrom said:
So I'm by no means super knowledgable with this stuff but I've rooted a few phones, played around with CM on my old evo but for the most part I enjoy rooted stock.
I have Galaxy S3 Sprint 4.3 updated OTA from a rooted (4.1.2). When I took the OTA I lost root, no big deal I used Odin and flashed the CF auto root, it said it removed knox and I had root back. Cool!
In short 4.3 sucked, wanted to downgrade back so things like TrevE mod would work again and it wouldn't be so buggy. I tried to use odin to flash "KIES_HOME_L710VPBMD4_L710SPRBMD4_1130792_REV03_user_low_ship.tar.md5" but it gave me the "Use Kies Recovery and error occured" message.
So I then used odin and flashed TWRP and my phone booted.
I'm back on 4.3 rooted.
I've tried picking through the forums and interwebz for answers but I get mixed messages and info on international versions and what not.
I'm tired of trying to figure it out and really could use some help downgrading back to 4.1.2
Thanks,
Brandon
Click to expand...
Click to collapse
do a factory data reset then use odin auto root from computer ok...... after boot u will get a security message supersu will be unfortunately stopping this is ok..... then u will need to download the supersu.app to root of sd then manually install this will update it and now u can turn off knox and have root... then go to market and download odin mobile then flash your .tar file u want and you will be good to go 4.1.2 doesn't have knox and has a unlocked bootloader so have fun bro this method may work for other phones

smuther22 said:
do a factory data reset then use odin auto root from computer ok...... after boot u will get a security message supersu will be unfortunately stopping this is ok..... then u will need to download the supersu.app to root of sd then manually install this will update it and now u can turn off knox and have root... then go to market and download odin mobile then flash your .tar file u want and you will be good to go 4.1.2 doesn't have knox and has a unlocked bootloader so have fun bro this method may work for other phones
Click to expand...
Click to collapse
Do you realize that this thread hasn't been used in a couple of months? I would assume the author has no more need of advice based on the inactivity. Also, once Knox is installed, it is on the phone to stay. PERIOD. NO DOWNGRADING POSSIBLE VIA ODIN. Custom ROMs of any build are fine via custom recovery, but any attempt to change the bootloader will trigger Knox and brick the phone. Dangerous info to be posting here, especially since someone else who doesn't know better might try this.

Bootloader rp swrev : 1 .... and general questions

galaxy s3 4.3 sgh i747m with Roger's on twrp recovery
Hi I have rooted my phone two days ago and im new to the rooting world of android there is soooo much stuff to learn !!!
I want to know what does it mean when im in odin mode and I see
qualcomm secureboot enable.... and bootloader rp swrev :1 what does it means actually ? I try to find information but it's not clear i dont want to install a custom rom and brick my phone ...
i have so many question ...
if I install a custom rom does my boot loader have to be unlock or i shouldn't care ?
I do i check if my bootloader is unlock ?
Is the carrier is important when you put a custom rom ?
where I can find the gapps file made for my phone ?
1 rom that interest me is wicked sensation rom http://forum.xda-developers.com/showthread.php?t=2286350 it look so sick but once again it says for at&t can I install it if im with rogers because they are the same model ?
it's some little tecnical question that I have can some one help me

Are you on stock Rogers 4.3? If you are, loading a custom recovery will void the warranty by tripping the Knox counter.
If you have no warranty and just want to install a custom ROM, you can install a custom recovery via Odin and flash the ROM you want.

audit13 said:
Are you on stock Rogers 4.3? If you are, loading a custom recovery will void the warranty by tripping the Knox counter.
If you have no warranty and just want to install a custom ROM, you can install a custom recovery via Odin and flash the ROM you want.
Click to expand...
Click to collapse
Yes im on stock 4.3 but my warranty is over so it doesn't really matter I have TWRP recovery so if I want to flash a rom there is no problem ?
I made a nandroid backup in case

carlosQC said:
Yes im on stock 4.3 but my warranty is over so it doesn't really matter I have TWRP recovery so if I want to flash a rom there is no problem ?
I made a nandroid backup in case
Click to expand...
Click to collapse
I prefer Philz Touch which is based on CWM because I had problems flashing with TWRP.
There should be no problem as long as the ROM is supported by TWRP.

carlosQC said:
Yes im on stock 4.3 but my warranty is over so it doesn't really matter I have TWRP recovery so if I want to flash a rom there is no problem ?
I made a nandroid backup in case
Click to expand...
Click to collapse
You shouldn't just go around flashing all the ROMs you think look or sound cool. I would suggest doing your research beforehand. For example, if you want to install the newer KitKat ROMs, you HAVE to be on a JellyBean bootloader. Click HERE for the bootloader guide if you need it.
Also, your TWRP should always be up to date. The link for the latest (may be outdated, idk...)TWRP is HERE
Lastly, if you ever run into any problems and want to go back to stock, or you just want to start fresh and start from scratch, then use this. This has never failed on me. Click HERE
Remember, YMMV.
Best of luck!

I don't think you need a 4.3 bootloader for all ROMs. I have loaded Cyanfox, CM11, and Vidalus which are all 4.4.2 ROMs without issue. I personally prefer to stay away from the 4.3 bootloader because I want the ability to return my phone to stock for warranty purposes.
The OP is running 4.3 stock and the link you provided could brick his phone.

audit13 said:
I don't think you need a 4.3 bootloader for all ROMs. I have loaded Cyanfox, CM11, and Vidalus which are all 4.4.2 ROMs without issue. I personally prefer to stay away from the 4.3 bootloader because I want the ability to return my phone to stock for warranty purposes.
The OP is running 4.3 stock and the link you provided could brick his phone.
Click to expand...
Click to collapse
I never said that the OP needed to update his bootloader, I was just mentioning as an example if he wanted to then he would probably need to if he wanted to flash a KitKat ROM.
But you are right, for him, I would stay away from 4.3 since you can't downgrade.

[Q] clockwork mod removal

I rooted my friends S3 ATT with the s3 toolkit v7.0 he now wants me to unroot it so he can take the 4.3 update it have run the unroot and remove zip multiple times ( I even re rooted it and tried removing it again) and it will not remove clockwork mod recovery even though it says it will, it has successfully unrooted it the phone and removed super user and busy box . he does not want to loose all the data on his phone is there another way to remove clock work mod and get him back to the stock recovery so he can take the 4.3 update with out using triangle away ?
thanks

You would need to flash the stock recovery to replace CWM.

audit13 said:
You would need to flash the stock recovery to replace CWM.
Click to expand...
Click to collapse
where do I acquire a stock recovery and is it flashed through oden or through clockwork ?
thanks

I'm not sure where to find the stock recovery as I have never seen one that is flashable via Odin, CWM, or TWRP.
By updating to stock 4.3, the phone will have a bootloader that cannot be downgraded and Knox will be installed.
I personally avoided the 4.3 update because the 4.3 bootloader makes it tough to go back to stock and tripping the knox counter will void the warranty. Also, knox can interfere with root access.

audit13 said:
I'm not sure where to find the stock recovery as I have never seen one that is flashable via Odin, CWM, or TWRP.
By updating to stock 4.3, the phone will have a bootloader that cannot be downgraded and Knox will be installed.
I personally avoided the 4.3 update because the 4.3 bootloader makes it tough to go back to stock and tripping the knox counter will void the warranty. Also, knox can interfere with root access.
Click to expand...
Click to collapse
actually I'm a blind idiot it is an option right in the tool kit i have just reflashed it and all is good
THANK YOU VERY MUCH I could not have fixed this with out your help
(he never used any custom roms and does not mind that his unit will be locked )

iiipm said:
actually I'm a blind idiot it is an option right in the tool kit i have just reflashed it and all is good
THANK YOU VERY MUCH I could not have fixed this with out your help
(he never used any custom roms and does not mind that his unit will be locked )
Click to expand...
Click to collapse
Hey, thanks for the post. I learned something too:good:

[q] urgent!: Need to reset!

My friend has a Galaxy S4 on T-Mobile.
It has the Knox Counter set to 0x1.
It is currently on CM11, and I have TWRP installed, but apparently he cannot receive texts...
I tried restoring to the MDL firmware with Odin but it failed... I think because of the boot loader. I tried installing a 4.2.2 ROM but it was boot looping at the T-Mobile screen.
I have 1 hour tomorrow with him to fix it -- I just want to restore it to a Samsung Stock ROM (just downloaded the 4.4.2 Deodexed KitKat ROM).
How can I restore this phone to a 100% working Samsung Stock ROM? I don't care if it is a rooted ROM. I just need texts, calls, etc. 100% working and I need it to be a TouchWiz ROM. Thanks!
EDIT: I also found this list of firmwares: if I should try again with ODIN with the right firmware, which one should i be flashing?

If he just mainly wants stock and already has knox tripped just flash the newest odin image for the device.
You can use this one that Fenny posted.
http://www.cheatersedge.org/android/m919/M919UVUFNB4_M919TMBFNB4_TMB_FENNY_FIXED.zip
If you can still get into recovery you can flash the custom stock rom from Fenny or the Sickness. Both work really well.
The one from the sickness seems to have more of a stock feel though.
http://forum.xda-developers.com/showthread.php?t=2683507

TheArtiszan said:
If he just mainly wants stock and already has knox tripped just flash the newest odin image for the device.
You can use this one that Fenny posted.
http://www.cheatersedge.org/android/m919/M919UVUFNB4_M919TMBFNB4_TMB_FENNY_FIXED.zip
If you can still get into recovery you can flash the custom stock rom from Fenny or the Sickness. Both work really well.
The one from the sickness seems to have more of a stock feel though.
http://forum.xda-developers.com/showthread.php?t=2683507
Click to expand...
Click to collapse
Thank you!!!!!!!!!