Develop Bugs

Super Problem!!! Need help quick please!

Ok I think I'm really f*cked.
I had installed ProBAM 1.2.4 but because I had some serious problems with data loss and not making backups properly I decided to flash official 4.1.2 and then root+install recovery and install Phoenix ROM. After trying to install the 4.1.2 from SamMobile for my carrier(Cosmote GR) using dr.ketan's instructions for stock ROM ODIN said failed. Then my phone booted up and It said something like "Corrupt Android upgrade please use emergency install using Kies". So I installed Kies, followed the instructions and my phone finally booted up, all working! Now here's the problem. I opened settings and it said I had Android 4.3(it also prompted me to make a new update/OTA). So what I want is:
*How can I downgrade to official 4.1.2? I dont care about warranty.
"*How can I reset KNOX WARRANTY AVOID: 1" ? Or at least how can I root 4.3 without tripping KNOX so that I install custom recovery and install new ROM?
Thanks in advance, really need help quick.

You and me again
1. After official update to 4.3 via Kies, afaik no more downgrade to 4.1.2 cause you flashed knox-enabled bootloader too. (Check this!)
2. At this moment there is nothing known to reset knox-counter
3. Knox counter has tripped already, therefor I recommend http://forum.xda-developers.com/showthread.php?t=2531965 to root.
Stay cool and now you are in the same situation as most people here: You can test as many custom roms as you like.

Androidwizzard said:
You and me again
1. After official update to 4.3 via Kies, afaik no more downgrade to 4.1.2 cause you flashed knox-enabled bootloader too. (Check this!)
2. At this moment there is nothing known to reset knox-counter
3. Knox counter has tripped already, therefor I recommend http://forum.xda-developers.com/showthread.php?t=2531965 to root.
Stay cool and now you are in the same situation as most people here: You can test as many custom roms as you like.
Click to expand...
Click to collapse
@Androidwizzard YOU ARE THE MAN!!! OMG you are SOOOOO helpful!! I love when members here are soo nice and helpful to others Anyway tomorrow I will try rooting my phone using that method(I will first for to service to replace the screen like I told you ) but now after reading so many knox threads I'm confused. Here's my question. After rooting and installing Philz recovery, can I flash MJ5 Bootloader and then Phoenix ROM? I want a KNOX free ROM Thanks again

Please check your bootloader with the app z-device, cause I think after that kies-update you should have a newer BL than MJ5 and then downgrading the BL is impossible, don't even try that (in many threads you can read about that failure!)
With the newer BL you can flash all roms 4.3+ here without even thinking about wifi and so on.

Androidwizzard said:
Please check your bootloader with the app z-device, cause I think after that kies-update you should have a newer BL than MJ5 and then downgrading the BL is impossible, don't even try that (in many threads you can read about that failure!)
With the newer BL you can flash all roms 4.3+ here without even thinking about wifi and so on.
Click to expand...
Click to collapse
@Androidwizzard Heres what I got from z-device test
https://imageshack.com/i/0wn8lep and https://imageshack.com/i/ngyrblp
So after rooting I can flash any 4.3+ ROM without problems? And how to remove KNOX?

As I have told you: It is a newer BL! (Trying to downgrade will end in bootloop and errors).
And as mentioned in Post #2 http://forum.xda-developers.com/showthread.php?t=2531965
for me the best and easy way to root and deknox :good: if you are sure, that knox-count is x1

Androidwizzard said:
As I have told you: It is a newer BL! (Trying to downgrade will end in bootloop and errors).
And as mentioned in Post #2 http://forum.xda-developers.com/showthread.php?t=2531965
for me the best and easy way to root and deknox :good: if you are sure, that knox-count is x1
Click to expand...
Click to collapse
@Androidwizzard So first I flash Philz recovery with ODIN and then boot into recovery and flash dr.ketan's aroma tool to root and deKNOX right? Do I have to DeKNOX everytime I flash a new ROM or just once?

You do it only one time, cause custom roms are deknoxed :good:
In the moment you have an official rom with knox.

Androidwizzard said:
You do it only one time, cause custom roms are deknoxed :good:
In the moment you have an official rom with knox.
Click to expand...
Click to collapse
@Androidwizzard Soo(sorry for being annoying :/) Flash Philz with odin->Flash dr.ketan's tool with recovery->Root->DeKNOX->Flash Phoenix ROM

NickVXD said:
@Androidwizzard Soo(sorry for being annoying :/) Flash Philz with odin->Flash dr.ketan's tool with recovery->Root->DeKNOX->Flash Phoenix ROM
Click to expand...
Click to collapse
Well not really 100% sure, you need to deknox with the tool, if you flash a custom rom immediatly, but it won't be wrong, so do it that way.

[Q] clockwork mod removal

I rooted my friends S3 ATT with the s3 toolkit v7.0 he now wants me to unroot it so he can take the 4.3 update it have run the unroot and remove zip multiple times ( I even re rooted it and tried removing it again) and it will not remove clockwork mod recovery even though it says it will, it has successfully unrooted it the phone and removed super user and busy box . he does not want to loose all the data on his phone is there another way to remove clock work mod and get him back to the stock recovery so he can take the 4.3 update with out using triangle away ?
thanks

You would need to flash the stock recovery to replace CWM.

audit13 said:
You would need to flash the stock recovery to replace CWM.
Click to expand...
Click to collapse
where do I acquire a stock recovery and is it flashed through oden or through clockwork ?
thanks

I'm not sure where to find the stock recovery as I have never seen one that is flashable via Odin, CWM, or TWRP.
By updating to stock 4.3, the phone will have a bootloader that cannot be downgraded and Knox will be installed.
I personally avoided the 4.3 update because the 4.3 bootloader makes it tough to go back to stock and tripping the knox counter will void the warranty. Also, knox can interfere with root access.

audit13 said:
I'm not sure where to find the stock recovery as I have never seen one that is flashable via Odin, CWM, or TWRP.
By updating to stock 4.3, the phone will have a bootloader that cannot be downgraded and Knox will be installed.
I personally avoided the 4.3 update because the 4.3 bootloader makes it tough to go back to stock and tripping the knox counter will void the warranty. Also, knox can interfere with root access.
Click to expand...
Click to collapse
actually I'm a blind idiot it is an option right in the tool kit i have just reflashed it and all is good
THANK YOU VERY MUCH I could not have fixed this with out your help
(he never used any custom roms and does not mind that his unit will be locked )

iiipm said:
actually I'm a blind idiot it is an option right in the tool kit i have just reflashed it and all is good
THANK YOU VERY MUCH I could not have fixed this with out your help
(he never used any custom roms and does not mind that his unit will be locked )
Click to expand...
Click to collapse
Hey, thanks for the post. I learned something too:good:

[Q] 4.2.2 Roms after Knox is tripped?

So I recently used CF Autoroot to root my T-Mobile GS3 SGH-T999 and I heard that if you try to downgrade to android versions before 4.3 your phone will be hard bricked. So with my knox counter tripped I was wondering can I flash a rom that is on 4.2.2 I want to flash the MIUI rom. Thanks in advance.

You can flash any custom Rom via Custom Recovery. Nothing bad will happen as they have only Rom and Kernel.
However just never flash Pre-4.3 Samsung firmwares via Odin. Those contain the older bootloader. If you tried to flash older bootloader, you get hardbrick.

Perseus71 said:
You can flash any custom Rom via Custom Recovery. Nothing bad will happen as they have only Rom and Kernel.
However just never flash Pre-4.3 Samsung firmwares via Odin. Those contain the older bootloader. If you tried to flash older bootloader, you get hardbrick.
Click to expand...
Click to collapse
Thanks for the answer been wanting to try MIUI for so long was scared of hard brick

Quxus said:
So I recently used CF Autoroot to root my T-Mobile GS3 SGH-T999 and I heard that if you try to downgrade to android versions before 4.3 your phone will be hard bricked. So with my knox counter tripped I was wondering can I flash a rom that is on 4.2.2 I want to flash the MIUI rom. Thanks in advance.
Click to expand...
Click to collapse
I know to get rid of the trip count I used triangle away. I installed, opened the app, followed the set up, reboot and count was back to zero.

[Q] Downgrading CM11 to stock 4.3 on i747M

I know there are a few threads regarding this issue but I can't seem to find a definitive answer.
I am currently running stock 4.3 jellybean (rooted). My phone hasn't received the 4.4 KitKat update yet, so I wanted to install CM11 in order to get KitKat on my s3. However, I heard CM11 can be buggy on the s3, so in case things go south, I want to be able to revert back to the stock 4.3 rom. Some people have said that you can easily flash the stock ROM via ODIN. However, others said that downgrading from 4.4.2 to 4.3 will hard brick the device since installing CM11 updates the boot loader. So downgrading to 4.3 stock with a 4.4.2 boot loader will cause a hard brick according to other threads I've seen. My question is, how can I downgrade from CM11 to stock 4.3 safely without bricking? Thanks in advance.

If you are sure you are using a Canadian version of the i747m, you can flash back to stock in Odin using a stock 4.3 ROM for the phone's original carrier (Bell, Rogers, Telus).

audit13 said:
If you are sure you are using a Canadian version of the i747m, you can flash back to stock in Odin using a stock 4.3 ROM for the phone's original carrier (Bell, Rogers, Telus).
Click to expand...
Click to collapse
Yes I got the phone from Rogers, it's most definitely i747M. But do I have to worry about any issues with the bootloader? I'm assuming installing CM11 will install the 4.4.2 bootloader, so if I choose to downgrade to the stock 4.3 rom, will it cause any issues seeing as I'm running a 4.3 rom with a 4.4.2 bootloader? I just want to make sure because I heard it can cause some serious problems if the bootloader is newer than the rom.

Mzrz said:
Yes I got the phone from Rogers, it's most definitely i747M. But do I have to worry about any issues with the bootloader? I'm assuming installing CM11 will install the 4.4.2 bootloader, so if I choose to downgrade to the stock 4.3 rom, will it cause any issues seeing as I'm running a 4.3 rom with a 4.4.2 bootloader? I just want to make sure because I heard it can cause some serious problems if the bootloader is newer than the rom.
Click to expand...
Click to collapse
I have never come across a custom ROM that touches the bootloader. A compatible bootloader has to be loaded on the phone before you attempt to install the custom ROM. Supported bootloaders can be found in the ROM's updater script.
I assume your phone has no warranty since you rooted it on stock 4.3. Did you root it by installing a pre-rooted ROM?
You could copy a ROM to your external SD card, install Philz Touch via Odin, reboot directly to recovery, create a nandroid backup, wipe cache, Dalvik, data, and install your KK ROM.

audit13 said:
I have never come across a custom ROM that touches the bootloader. A compatible bootloader has to be loaded on the phone before you attempt to install the custom ROM. Supported bootloaders can be found in the ROM's updater script.
I assume your phone has no warranty since you rooted it on stock 4.3. Did you root it by installing a pre-rooted ROM?
You could copy a ROM to your external SD card, install Philz Touch via Odin, reboot directly to recovery, create a nandroid backup, wipe cache, Dalvik, data, and install your KK ROM.
Click to expand...
Click to collapse
Okay, I was just making sure because I know OTA updates can change the bootloader, so I just wanted to make sure the custom roms don't do that. As for the custom recovery, are you recommending Philz Touch over CWM and TWRP? Do you know which custom recovery is installed from the CM installer?

audit13 said:
I have never come across a custom ROM that touches the bootloader. A compatible bootloader has to be loaded on the phone before you attempt to install the custom ROM. Supported bootloaders can be found in the ROM's updater script.
I assume your phone has no warranty since you rooted it on stock 4.3. Did you root it by installing a pre-rooted ROM?
You could copy a ROM to your external SD card, install Philz Touch via Odin, reboot directly to recovery, create a nandroid backup, wipe cache, Dalvik, data, and install your KK ROM.
Click to expand...
Click to collapse
Oh and one more question, my phone was originally carrier locked to Rogers and unrooted on 4.3 jelly bean. I brought it in to a cell store for them to carrier unlock it for me, but they used a rooting method to unlock it (because SuperSU was installed on it when I brought it back). They didn't unlock it with a code, so I'm guessing they used something like Samsung Tool or z3x shell. If I install CM11, will I lose the unlock, considering it's more of a "soft unlock", or is the unlock permanent regardless of how many roms I flash? Thanks for your help!

Mzrz said:
Okay, I was just making sure because I know OTA updates can change the bootloader, so I just wanted to make sure the custom roms don't do that. As for the custom recovery, are you recommending Philz Touch over CWM and TWRP? Do you know which custom recovery is installed from the CM installer?
Click to expand...
Click to collapse
Philz is based on the latest release of CWM and I prefer CWM over TWRP because I had problems flashing ROMs. Once I switched to Philz/CWM, no more problems.
Mzrz said:
Oh and one more question, my phone was originally carrier locked to Rogers and unrooted on 4.3 jelly bean. I brought it in to a cell store for them to carrier unlock it for me, but they used a rooting method to unlock it (because SuperSU was installed on it when I brought it back). They didn't unlock it with a code, so I'm guessing they used something like Samsung Tool or z3x shell. If I install CM11, will I lose the unlock, considering it's more of a "soft unlock", or is the unlock permanent regardless of how many roms I flash? Thanks for your help!
Click to expand...
Click to collapse
The unlock should be permanent. I unlocked it using the free method when on 4.1.1 and no ROM has ever caused it to re-lock. Reflashing a completely stock ROM, including the bootloader, did not relock the phone.
Please remember that flashing and changing ROMs will always carry a risk of soft bricking or hard bricking your phone. Make sure you read all of the guides and be prepared for disaster.
Good read here: http://forum.xda-developers.com/showthread.php?t=2201860

How to have custom recovery

Hey guys its been a week since i bought the note 2 and i rooted it. But i cannot find how to flash a custom recovery tutorial anywhere. I am on jellybean 4.1 and the rest of the details (firmware etc) can be found on the screenshots attached..
I would highly appreciate if someone can send me a link to the guide for flashing.. thanks a lot in advance
Sent from my GT-N7100 using XDA Premium 4 mobile app

Just simply flash via Odin
You can choose CWM, Philz touch or TWRP

RazaVakil7995 said:
Hey guys its been a week since i bought the note 2 and i rooted it. But i cannot find how to flash a custom recovery tutorial anywhere. I am on jellybean 4.1 and the rest of the details (firmware etc) can be found on the screenshots attached..
I would highly appreciate if someone can send me a link to the guide for flashing.. thanks a lot in advance
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You got two options either root your phone while being on 4.1.2 or upgrade to official Indian 4.4.2 and then root it.Ofcourse once you root your current 4.1.2 you can try custom 4.4 ROM and if you don't like it you can go back to 4.1.2 or flash a 4.3 custom ROM. To root your 4.1.2 rom read this guide.If you decide to upgrade to 4.4.2 Indian firmware download it from here.
To flash the 4.4.2 ROM on your phone download it from the above link(there are 3 links where the ROM is uploaded) ,use any of the links and download the zip file,extract it you'll get a tar file,put your phone into download mode ,open odin v3.09 on pc and flash the official stock rom by checking the AP tab on odin.You can find tutorials on youtube on how to use odin to flash official stock firmware so just look them up if you need it.Once you flash stock ROM you can root your phone via this guide.
Okay so now things to remember.If you root your 4.1.2 ROM and want to try 4.3 or 4.4 custom ROM you need to flash MJ5 bootloader in order to have working wifi.Bootloader is flashed directly on your mother board and it cannot be downgraded only be upgraded.MJ5 is the last 4.3 bootloader which is KNOX free(what is knox ,blah blah,you can read about it on google).Advantage of MJ5 is you can try 4.1.2/4.3/4.4.2 rom and your warranty and knox remain intact but if you upgrade to official 4.3 or 4.4.2 ROM you'll be on knoxed bootlooader which means you cannot downgrade to 4.1.2 anymore plus rooting a phone with knoxed bootloader will trigger knox 0x1 and your warranty if any will be void (no way yet to reset Knox).So if you have warranty on your phone then my advise is root your 4.1.2 Rom,download any 4.3 or 4.4.2 custom ROM,you wont have wifi working then flash the MJ5 bootloader from here and read this post on how to flash bootloader.
I know it's a lot of info to you but your best guide is self reading from the above links i hooked you up with.Also read comments from people cause that's how I learned I read and read a lot before i jumped the rooting bandwagon cause wanted to make sure i don't brick my phone. Ofcourse whenever in doubt STOP RIGHT THERE and ask us.Dont attempt things that you are not sure of.Good luck.

Thanks for the help
singhpratik87 said:
You got two options either root your phone while being on 4.1.2 or upgrade to official Indian 4.4.2 and then root it.Ofcourse once you root your current 4.1.2 you can try custom 4.4 ROM and if you don't like it you can go back to 4.1.2 or flash a 4.3 custom ROM. To root your 4.1.2 rom read this guide.If you decide to upgrade to 4.4.2 Indian firmware download it from here.
To flash the 4.4.2 ROM on your phone download it from the above link(there are 3 links where the ROM is uploaded) ,use any of the links and download the zip file,extract it you'll get a tar file,put your phone into download mode ,open odin v3.09 on pc and flash the official stock rom by checking the AP tab on odin.You can find tutorials on youtube on how to use odin to flash official stock firmware so just look them up if you need it.Once you flash stock ROM you can root your phone via this guide.
Okay so now things to remember.If you root your 4.1.2 ROM and want to try 4.3 or 4.4 custom ROM you need to flash MJ5 bootloader in order to have working wifi.Bootloader is flashed directly on your mother board and it cannot be downgraded only be upgraded.MJ5 is the last 4.3 bootloader which is KNOX free(what is knox ,blah blah,you can read about it on google).Advantage of MJ5 is you can try 4.1.2/4.3/4.4.2 rom and your warranty and knox remain intact but if you upgrade to official 4.3 or 4.4.2 ROM you'll be on knoxed bootlooader which means you cannot downgrade to 4.1.2 anymore plus rooting a phone with knoxed bootloader will trigger knox 0x1 and your warranty if any will be void (no way yet to reset Knox).So if you have warranty on your phone then my advise is root your 4.1.2 Rom,download any 4.3 or 4.4.2 custom ROM,you wont have wifi working then flash the MJ5 bootloader from here and read this post on how to flash bootloader.
I know it's a lot of info to you but your best guide is self reading from the above links i hooked you up with.Also read comments from people cause that's how I learned I read and read a lot before i jumped the rooting bandwagon cause wanted to make sure i don't brick my phone. Ofcourse whenever in doubt STOP RIGHT THERE and ask us.Dont attempt things that you are not sure of.Good luck.
Click to expand...
Click to collapse
Wow that's a lot of info you provided there, thanks. I am not new to rooting as far it goes I have rooted and flashed many roms on my galaxy s advance and my micromax A87 before that. But note 2 was a flagship device so there are many complications that come along which got me confused. As for now, I have my rooted 4.1.2 stock rom along with cwm recovery flashed via rom manager. I am planning to flash either DN3 or the Xperia Z-ized rom. So my question is: do I have to flash mj5 bootloader to flash DN3 and xperia z-ized or can I directly flash it from cwm (with factory reset and necessary wipes of course)?
BTW, I have heard that knox is a security application that prohibits rooting on samsung phones. It also had a reward for $18k for those who can bypass the knox on the S5 and root it. If I am right, then I think I am fairly acquainted to knox.
Once again, thanks a lot for helping! Appreciate it

RazaVakil7995 said:
Wow that's a lot of info you provided there, thanks. I am not new to rooting as far it goes I have rooted and flashed many roms on my galaxy s advance and my micromax A87 before that. But note 2 was a flagship device so there are many complications that come along which got me confused. As for now, I have my rooted 4.1.2 stock rom along with cwm recovery flashed via rom manager. I am planning to flash either DN3 or the Xperia Z-ized rom. So my question is: do I have to flash mj5 bootloader to flash DN3 and xperia z-ized or can I directly flash it from cwm (with factory reset and necessary wipes of course)?
BTW, I have heard that knox is a security application that prohibits rooting on samsung phones. It also had a reward for $18k for those who can bypass the knox on the S5 and root it. If I am right, then I think I am fairly acquainted to knox.
Once again, thanks a lot for helping! Appreciate it
Click to expand...
Click to collapse
Since you are on stock 4.1.2 MJ5 is required for wifi to work.i learned 2 weeks ago that even mj5 is not required as previously thought by us at least not while flashing 4.4.2 TW rom.When you flash 4.4.2 custom ROM you wont have wifi working,then flash custom kernel like agni or nadia and wifi works flawlessly so one doesn't need to flash mj5 bootloader.I am not sure if this would work on 4.3 ROM you could try xperia z'd 4.3 custom ROM then flash a compatible 4.3 custom kernel and see if wifi works if it does you're set.This was new to most of us so I asked the person who told me about this how did he manage to do this and he told me apparently custom kernels have some sort of wifi drivers on them so when we flash custom kernels on 4.4.2 ROM wifi works but it wont work on stock kernel unless you upgrade to MJ5 and on stock kernel.MJ5 is safe to flash anyways since its knox free bootloader.
Actually 4.3 and 4.4.2 note 2 phones and others got knox on them but we found a way to disable knox after rooting our phone SuperSu disables it but knox is triggered to 0x1 and there's no way to reset KNOX since it's concerned with the motherboard of the phone which is the heart and soul of out note 2.So that bounty you might be talking about how to reset it perhaps.Even if they succeed in reversing it doesn't necessarily mean it would work on note 3 or note 2 cause of the phones being of different hardware .i don't know the technicalities of this.

singhpratik87 said:
Since you are on stock 4.1.2 MJ5 is required for wifi to work.i learned 2 weeks ago that even mj5 is not required as previously thought by us at least not while flashing 4.4.2 TW rom.When you flash 4.4.2 custom ROM you wont have wifi working,then flash custom kernel like agni or nadia and wifi works flawlessly so one doesn't need to flash mj5 bootloader.I am not sure if this would work on 4.3 ROM you could try xperia z'd 4.3 custom ROM then flash a compatible 4.3 custom kernel and see if wifi works if it does you're set.This was new to most of us so I asked the person who told me about this how did he manage to do this and he told me apparently custom kernels have some sort of wifi drivers on them so when we flash custom kernels on 4.4.2 ROM wifi works but it wont work on stock kernel unless you upgrade to MJ5 and on stock kernel.MJ5 is safe to flash anyways since its knox free bootloader.
Actually 4.3 and 4.4.2 note 2 phones and others got knox on them but we found a way to disable knox after rooting our phone SuperSu disables it but knox is triggered to 0x1 and there's no way to reset KNOX since it's concerned with the motherboard of the phone which is the heart and soul of out note 2.So that bounty you might be talking about how to reset it perhaps.Even if they succeed in reversing it doesn't necessarily mean it would work on note 3 or note 2 cause of the phones being of different hardware .i don't know the technicalities of this.
Click to expand...
Click to collapse
How do you know all this man??

RazaVakil7995 said:
How do you know all this man??
Click to expand...
Click to collapse
Lurking around in xda and reading as much as I can and participating in discussions related to Knox.I was clueless to all this Knox and how it works.My previous phone was HTC HD2 so samsung note II was the first serious smartphone I owned so just wanted to be extra careful that I don't end up bricking my device so read and read and asked questions.