I rooted my dad's phone a while back ago so he can use tethering in case of emergencies etc. He recently got a smart watch and I wanted to updated it so that he can use it. But it has not been touched since that day. I essentially want rooted stock rom, I'm unaware of where to find that the closest I can find is StockMod kitkat. Which seems to not work on ATT phones? I just want to make sure that I don't brick his only phone on christmas. So is there something I should be aware of?
His model is SGH-i747
Baseband
i747UCDLK3
Build number
jro03
So how do I go about upgrading it? Can I just flash TWRP and flash any rom using TWRP?
I found this, so I should install new TWRP, then flash a specified kernel then flash rom? would this be safe route?
Some of the latest ROMs require a 4.4.2 bootloader and modem.
The simplest and safest way to get the latest bootloader may be to flash back to unrooted stock 4.1.1 and run OTA updates until the phone is running the latest KK ROM. You can then flash TWRP or CWM and a custom ROM.
audit13 said:
Some of the latest ROMs require a 4.4.2 bootloader and modem.
The simplest and safest way to get the latest bootloader may be to flash back to unrooted stock 4.1.1 and run OTA updates until the phone is running the latest KK ROM. You can then flash TWRP or CWM and a custom ROM.
Click to expand...
Click to collapse
Would this require flashing with ODIN? I just want it so that it works with root is not required anymore.
Yes, you would flash the 4.1.1 stock ATT ROM via Odin. I prefer Odin 3.07.
You cannot install OTA updates with root.
You can try flashing just the bootloader and modem but I prefer the long slow route of OTA updates.
I rather do it this way, manually so my dad can enjoy it today. I was wondering how can I update it's TWRP? it's at 2.3 but the TWRP manager keeps crashing when I update it.
I highly recommend the latest d2lte version of Philz Touch for recovery.
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/
Ok I ****ed up, flash that kernel and did whatever and bam ****ed up. Not working... ****, I still ahve download mode and Recovery but it will not boot into the OS. I get a flash of samsung and then nothing else happends...****
I decided to flash stock DLK3 in odin. Then let the updates take it course (my dad doesn't need root) Where Can I find the file?
The stock ATT firmware is on sammobile.com.
If you want root, OTA to the latest 4.4.2, install Philz, flash supersu via recovery.
Related
I'm currently running beanstalk 4.4.1 rooted with twrp installed. I did the 4.3 OTA update before I went with the custom roms.
what is my options as far as going back to stock 4.3? I've read several threads but non of them were the exact scenario that im in. Any help is appreciated.
Are you running an AT&T phone? If you are, you cannot flash any rom that tries to flash a bootloader that is older than 4.3. If you do, it will brick the phone.
audit13 said:
Are you running an AT&T phone? If you are, you cannot flash any rom that tries to flash a bootloader that is older than 4.3. If you do, it will brick the phone.
Click to expand...
Click to collapse
yes it is at&t. Also I do have my original backup but twrp doesn't recognize it
Why not load a 4.3-based ROM? If you want to go back to stock, you could try using mobile Odin to load a stock ROM.
Wanting to drop stock(latest) back onto my phone as the person buying it wants that. I want to say I remember reading I needed a newer bootloader for 4.4.2. I got my device on launch and got tired of waiting and went to CM11.
What if anything other than clearing data/cache and flashing the stock deodexed/rooted ROM would I need to do? If there is a bootloader, is it a separate odin file? or flashable .zip?
muqali said:
Wanting to drop stock(latest) back onto my phone as the person buying it wants that. I want to say I remember reading I needed a newer bootloader for 4.4.2. I got my device on launch and got tired of waiting and went to CM11.
What if anything other than clearing data/cache and flashing the stock deodexed/rooted ROM would I need to do? If there is a bootloader, is it a separate odin file? or flashable .zip?
Click to expand...
Click to collapse
If you're on 4.3 still you will have to Odin a stock 4.3 firmware on to the phone. You can not have a custom recovery on the phone so the Odin way will also replace the custom recovery with stock recovery. Then once your phone is stock, you can then take the update to 4.4.2
If I'm not mistaken, you should download the 4.4.2 fw and Odin that on you phone as well. Even though you are Odining your new fw, the phone must be fully stock or that update will still fail.
Eric214 said:
If you're on 4.3 still you will have to Odin a stock 4.3 firmware on to the phone. You can not have a custom recovery on the phone so the Odin way will also replace the custom recovery with stock recovery. Then once your phone is stock, you can then take the update to 4.4.2
If I'm not mistaken, you should download the 4.4.2 fw and Odin that on you phone as well. Even though you are Odining your new fw, the phone must be fully stock or that update will still fail.
Click to expand...
Click to collapse
Well I was on 4.3 stock then went to Cyanogen 4.4.2. I've now got the deodexed/rooted stock 4.4.2 from the forum here and was able to boot it using leankernel. It works and the buyer is satisfied with it. He know how to flash updated ROMs so he can change later anyway. Thanks for the response though, I was thinking noone was gonna answer.
re: latest stock rom
muqali said:
Wanting to drop stock(latest) back onto my phone as the person buying it wants that. I want to say I remember reading I needed a newer bootloader for 4.4.2. I got my device on launch and got tired of waiting and went to CM11.
What if anything other than clearing data/cache and flashing the stock deodexed/rooted ROM would I need to do? If there is a bootloader, is it a separate odin file? or flashable .zip?
Click to expand...
Click to collapse
If you want the newest/latest official stock N900T KitKat firmware why not do the following:
You need to download and Odin flash the official stock KitKat N900T NE6 firmware.
Here is the direct fast download link for it:
http://www.androidfilehost.com/?fid=23501681358537528
The above zip file also contains Odin, CF-Autoroot and TWRP 2.7.0.1 recovery.
Be sure to go into recovery before Odin flashing NE6 and do a factory data reset
and a full wipe. Optional: Then Odin flash cf-autoroot and the TWRP 2.7.0.1.
If you want more information and or instructions here is the link:
http://forum.xda-developers.com/show...60&postcount=2
If you want the older official stock N900T 4.4.2 NB4 KitKat rom you can
download it from: http://tekunix.com/downloads/TMB-N900TUVUCNB4-20140305155920.zip
and Odin flash it instead of the stock NE6 official N900T firmware.
Both the older and newer official Kitkat stock roms come with the required bootloaders/baseband.
Good luck!
Misterjunky said:
If you want the newest/latest official stock N900T KitKat firmware why not do the following:
You need to download and Odin flash the official stock KitKat N900T NE6 firmware.
Here is the direct fast download link for it:
http://www.androidfilehost.com/?fid=23501681358537528
The above zip file also contains Odin, CF-Autoroot and TWRP 2.7.0.1 recovery.
Be sure to go into recovery before Odin flashing NE6 and do a factory data reset
and a full wipe. Optional: Then Odin flash cf-autoroot and the TWRP 2.7.0.1.
If you want more information and or instructions here is the link:
http://forum.xda-developers.com/show...60&postcount=2
If you want the older official stock N900T 4.4.2 NB4 KitKat rom you can
download it from: http://tekunix.com/downloads/TMB-N900TUVUCNB4-20140305155920.zip
and Odin flash it instead of the stock NE6 official N900T firmware.
Both the older and newer official Kitkat stock roms come with the required bootloaders/baseband.
Good luck!
Click to expand...
Click to collapse
So clear data/factory reset and clear cache in recovery. Reboot into download and flash NE6, then cf-autoroot, then TWRP? I didn't see you say exactly when to flash NE6.
hi guys new to the galaxy phone and i have been looking into flashing a rom. i have done all the ground work root and custom recovery but now im trying to flash a rom and i get errors. i looked it up to a point where everything i do want to flash requires a 4.4 or 4.3 update and i am stuck in 4.1 is there any solution to this like start from an older rom and work my way up to a current rom. would that work or odin the phone to a current update if possible to find the update. what options do i have ?
not sure if this is the correct thread
Well I would just flash via Odin up to 4.3 because most Roms require the 4.3 boot loader so yea
Sent from my ATT Samsung Galaxy SIII using TapaTalk
I recommend you not update to the 4.3 bootloader as the 4.3 bootloader can cause problems when trying to flash back to stock. Once you're on a 4.3 bootloader, you cannot downgrade to a lower version. Most ROMs seem to work fine with a 4.1.1 or 4.1.2 bootloader.
If you have the att s3 (i747) and not the Bell/Telus/Rogers s3 (i747m), you cannot use Odin to flash a stock 4.3 ROM as it does not exist. You would need to flash a version of 4.3 that has been custom compiled for flashing via Odin.
I would download the latest version of Philz Touch and flash the tar version via Odin. Copy a custom ROM to your SD card, boot to recovery, wipe cache, Dalvik, data, and flash the ROM.
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte
Hey guys,
I was running Cyanogenmod 11 for a while which I installed using the automatic tool online. During the summer I flashed Dirty Unicorns but I have issues with the camera and random rebooting. I just got a Galaxy Gear for Christmas and I've read that its only compatible with touchwiz roms.
I'm trying to go back to stock and I am ok with losing my root access.
I have an SGH-1747m on Baseband I747MVLUEMK5 and my service provider is Bell. The android version is 4.4.4 currently. Whats the easiest method to do this? I've read some concerning information that going back to an earlier version of android will soft brick your phone, but I believe the most current Bell firmware is still in Jelly Bean.
Is it as easy as downloading the correct firmware and flashing it using Clockworkmod Recovery?
Thanks
You should download the stock ROM from sammobile.com and flash it in Odin to get back to stock.
audit13 said:
You should download the stock ROM from sammobile.com and flash it in Odin to get back to stock.
Click to expand...
Click to collapse
The latest version available for my baseband is 4.3. Will I run into problems going from 4.4.4 to 4.3?
Flashing in Odin will flash everything, including the bootloader and modem.
audit13 said:
Flashing in Odin will flash everything, including the bootloader and modem.
Click to expand...
Click to collapse
Thanks. So if I'm understanding correctly I just flash the latest firmware released by my carrier (4.4.2)? Is there anything else to watch out for when choosing the firmware?
Also, before flashing should I make a backup with Clockwork Recovery or any other program? Will Clockwork Recovery still be present after flashing with ODIN?
ZombieLee said:
Thanks. So if I'm understanding correctly I just flash the latest firmware released by my carrier (4.4.2)? Is there anything else to watch out for when choosing the firmware?
Also, before flashing should I make a backup with Clockwork Recovery or any other program? Will Clockwork Recovery still be present after flashing with ODIN?
Click to expand...
Click to collapse
Yes, flash the latest firmware for your phone. Be sure it's firmware for the i747m and not anything else. Always make a backup if you ever screw up or want to go back to where you are now. You will lose everything by flashing the stock firmware with ODIN, even clockwork mod recovery.
Thanks. When I made a backup before going to Dirty Unicorns I used Clockwork Recovery. If Clockwork will be deleted by flashing with ODIN, how would I utilize that backup if I needed it? Should I use another program to back up?
EDIT: I flashed it and everything went smoothly. Sincere thanks to everyone who gave me help!
I have a Canadian Galaxy S3, on 4.1.1 DLK4 Official. I rooted it, and have TWRP.
I want to upgrade my rom to a CM12/13 but of course with root and custom recovery, OTA updates are blocked.
I need newer bootloaders and modem to run the newer android versions.
Should I install them now, while on 4.1.1, and then flash CM12, or should I sequentially update each of the AT&T firmwares until I get up to 4.4.2?
Do official roms have the bootloaders and modems in them and install them automatically?
Should I use the Kies restore method?
The Canadian and att s3 phones are not the same model number. Don't flash an att bootloader to your Canadian phone as this may brick the phone.
Flash latest stock rom from Sammobile.com, flash twrp, flash cm.
audit13 said:
The Canadian and att s3 phones are not the same model number. Don't flash an att bootloader to your Canadian phone as this may brick the phone.
Flash latest stock rom from Sammobile.com, flash twrp, flash cm.
Click to expand...
Click to collapse
Okay, but i can use AT&T roms tho?
The i747m will work with d2can, d2lte, and d2att Roms.
Is it safe to flash straight from 4.1.1 to 4.4.2 using a sammobile rom? will i brick due to Knox bootloader and modem?
Can I flash it using TWRP?
If someone could link a tutorial that would be very helpful.
I keep reading stuff that says to flash the newer bootloader before flashing a 4.3 firmware, and some that say the opposite. Others say that people should incrementally update.
I want to go from 4.1.1 original with Root and TWRP, to CM13.
Thank you.
Yes, you can flash the latest stock 4.4.2 rom from Sammobile.com directly to your phone. No need to do anything other than backing up your data.
audit13 said:
Yes, you can flash the latest stock 4.4.2 rom from Sammobile.com directly to your phone. No need to do anything other than backing up your data.
Click to expand...
Click to collapse
Thank you!
Now I just need to get the balls again to use odin. Flashing the custom recovery using the Universal Tool Kit that had step by step walkthrough was adrenaline rush enough LOL.
I could also use Kies, as that has 4.4.2 OB3 (telus), and also has "emergency firmware recovery" feature if a brick ever happens. Though ideally the only time boot.img gets flashed is only with Full Stock Firmware files.
I find kies to be unreliable when I have tried to restore firmware so I always stuck with Odin.