Develop Bugs

[Q] faild update

hey everyone , excuse my english iam still beginner.
i have i747 ATT and i was running on 4.2.1 , but i decide to get updated with 4.3 , i did download it and flash it but after doing all that the phone stops at setup screen showing nothing except apps has stop working example. unfortunately Samsung cloud data relay has stopped
please help and what i should do , thanks to you all

salahddine said:
hey everyone , excuse my english iam still beginner.
i have i747 ATT and i was running on 4.2.1 , but i decide to get updated with 4.3 , i did download it and flash it but after doing all that the phone stops at setup screen showing nothing except apps has stop working example. unfortunately Samsung cloud data relay has stopped
please help and what i should do , thanks to you all
Click to expand...
Click to collapse
Did you mean 4.1.2 or were you running a custom ROM as there is no official 4.2.1 for the i747? How did you download and flash the 4.3 ROM?
Can you try booting into recovery and doing a hard wipe/reset from there? If this doesn't solve it, then you may need to restore the system image via custom recovery.

Larry2999 said:
Did you mean 4.1.2 or were you running a custom ROM as there is no official 4.2.1 for the i747? How did you download and flash the 4.3 ROM?
Can you try booting into recovery and doing a hard wipe/reset from there? If this doesn't solve it, then you may need to restore the system image via custom recovery.
Click to expand...
Click to collapse
yes sorry i mean . 4.1.2 , i can boot to recovery mode and download mode too , i did wipe cash i did wipe data too but nothing works ,
Stock OTA Update 4.3 I747UCUEMJB 623.1MB , i did download that rom , if you need to know anything else please ask i really need your help

salahddine said:
yes sorry i mean . 4.1.2 , i can boot to recovery mode and download mode too , i did wipe cash i did wipe data too but nothing works ,
Stock OTA Update 4.3 I747UCUEMJB 623.1MB , i did download that rom , if you need to know anything else please ask i really need your help
Click to expand...
Click to collapse
You updated to 4.3 by going over the air or via Odin?

audit13 said:
You updated to 4.3 by going over the air or via Odin?
Click to expand...
Click to collapse
The 623mb file sounds like the stock image for (official) OTA updates. Most likely it was downloaded and flashed as a zip via recovery. I'm not quite sure it works that way.
Salahddine, since you can get into download and recovery modes, your best option now may be to do a complete stock restore via custom recovery. See the thread below for instructions. You may need to first flash custom recovery although I'd guess you probably have custom recovery installed already.
http://forum.xda-developers.com/showthread.php?t=2658486
Download the relevant file posted in the link to your phone's internal SD card or to an external micro SDHC card and place in your phone. Boot into recovery mode and flash the zip. Hopefully, this should fix it.

Larry2999 said:
The 623mb file sounds like the stock image for (official) OTA updates. Most likely it was downloaded and flashed as a zip via recovery. I'm not quite sure it works that way.
Salahddine, since you can get into download and recovery modes, your best option now may be to do a complete stock restore via custom recovery. See the thread below for instructions. You may need to first flash custom recovery although I'd guess you probably have custom recovery installed already.
http://forum.xda-developers.com/showthread.php?t=2658486
Download the relevant file posted in the link to your phone's internal SD card or to an external micro SDHC card and place in your phone. Boot into recovery mode and flash the zip. Hopefully, this should fix it.
Click to expand...
Click to collapse
audit13 said:
You updated to 4.3 by going over the air or via Odin?
Click to expand...
Click to collapse
thank you all for your support and caring , i did downgrade it to 4.0.4 , then i did face some problems like messaging stopped working and other things , then i did install RCWM 6.0.4.3 via odin , then i did install custom rom , then i did install d2att_I747UCUEMJ2_root_noknox and now everything works fine . i thank you all again for your caring
and about your question iam from morocco i cant get ON THE AIR , i did try it many times but didnt work so i did download that stock ROM 623 mb and i did flash from sd card

salahddine said:
thank you all for your support and caring , i did downgrade it to 4.0.4 , then i did face some problems like messaging stopped working and other things , then i did install RCWM 6.0.4.3 via odin , then i did install custom rom , then i did install d2att_I747UCUEMJ2_root_noknox and now everything works fine . i thank you all again for your caring
and about your question iam from morocco i cant get ON THE AIR , i did try it many times but didnt work so i did download that stock ROM 623 mb and i did flash from sd card
Click to expand...
Click to collapse
Sorry, my initial assessment was wrong. The 623MB zip you flashed was not the OTA file but the stock ROM which should have been flashed along with the modem and kernel zips at the same time. The reason for the initial failure was likely because you did not flash the kernel (and modem) zips. Glad to know it's working fine now.

Urgent help needed

Am a bit novice n need help
am running dn3 v1.0 n its pretty stable and good
and my boot loader is N7100XXDMG1
so my first question is should i upgrae to dn3 v5 and if yes just see n tell if i have got the process right or not if not please suggest some correction
1- I flash mj5 bootloader from joeldroid n2 forum that 1.6 mb file using odin
2-i have philz tough now i install twrp
3- now i backup my app n efs
4-make a nandroid backup
5-wipe data n cache
6-install the new rom
is that it or i need to do something else
advance thanks help would appreciated

MD0038 said:
Am a bit novice n need help
am running dn3 v1.0 n its pretty stable and good
and my boot loader is N7100XXDMG1
so my first question is should i upgrae to dn3 v5 and if yes just see n tell if i have got the process right or not if not please suggest some correction
1- I flash mj5 bootloader from joeldroid n2 forum that 1.6 mb file using odin
2-i have philz tough now i install twrp
3- now i backup my app n efs
4-make a nandroid backup
5-wipe data n cache
6-install the new rom
is that it or i need to do something else
advance thanks help would appreciated
Click to expand...
Click to collapse
hello,
sure I'll have to flash the boot mj5 if you have not already installed and come 4.3.
mg1 is a modem, not a bootloader.
Steps you say are good for flash, keep the backups in the external sd card.
incuidos make full wipes and wipes internal sd car system and install from external sd card rom.
greetings and good luck

MD0038 said:
Am a bit novice n need help
am running dn3 v1.0 n its pretty stable and good
and my boot loader is N7100XXDMG1
so my first question is should i upgrae to dn3 v5 and if yes just see n tell if i have got the process right or not if not please suggest some correction
1- I flash mj5 bootloader from joeldroid n2 forum that 1.6 mb file using odin
2-i have philz tough now i install twrp
3- now i backup my app n efs
4-make a nandroid backup
5-wipe data n cache
6-install the new rom
is that it or i need to do something else
advance thanks help would appreciated
Click to expand...
Click to collapse
Don't flash bootloader first , back up your current rom and everything, make efs back up and such. Next you can either use latest Philz 6.26.6 or 6.41. Twrp use 2.7.0.2( whichever recovery you are comfortable with ). Do the wipes ( fully clean your internal memory ) If you need a guide on how to clean the phone using either of the recoveries click on my signature called JellyKat FAQ's you'll find the links to latest Recoveries as well as step by step instructions on how to flash bootloader and link to MJ5 bootloader ( it's a rar file , extract it and you'll get the .tar.md5 file and place that on Bootloader option in PC Odin). So after you've cleaned your phone flash the DN3 ROM let the phone boot up go through set up screen and such. Now your WiFi won't be working cause of old bootloader .so put your phone into download mods flash the new bootloader via PC Odin . Reboot and done. The only thing with MJ5 and other 4.3 bootloader is that you won't be able to charge your phone when powered off it reboots. If your warranty period is already over I suggest you flash the latest kitkat bootloader ND3 ( link to it is also in JellyKat FAQ - scroll to the bottom past version 5 and you'll find the newest bootloader). Only thing is that this is a Knoxed bootloader you can never go back to 4.1.2 only 4.4.2 or 4.3 ROMS would be possible . Good luck
Sent from my GT-N7100 using Tapatalk

singhpratik87 said:
Don't flash bootloader first , back up your current rom and everything, make efs back up and such. Next you can either use latest Philz 6.26.6 or 6.41. Twrp use 2.7.0.2( whichever recovery you are comfortable with ). Do the wipes ( fully clean your internal memory ) If you need a guide on how to clean the phone using either of the recoveries click on my signature called JellyKat FAQ's you'll find the links to latest Recoveries as well as step by step instructions on how to flash bootloader and link to MJ5 bootloader ( it's a rar file , extract it and you'll get the .tar.md5 file and place that on Bootloader option in PC Odin). So after you've cleaned your phone flash the DN3 ROM let the phone boot up go through set up screen and such. Now your WiFi won't be working cause of old bootloader .so put your phone into download mods flash the new bootloader via PC Odin . Reboot and done. The only thing with MJ5 and other 4.3 bootloader is that you won't be able to charge your phone when powered off it reboots. If your warranty period is already over I suggest you flash the latest kitkat bootloader ND3 ( link to it is also in JellyKat FAQ - scroll to the bottom past version 5 and you'll find the newest bootloader). Only thing is that this is a Knoxed bootloader you can never go back to 4.1.2 only 4.4.2 or 4.3 ROMS would be possible . Good luck
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
everything done as u told n things are just awsome njoying the new rom and typing from my note 2 and ya didnt flash modem u gave in dn3 thread I guess nd1 or sth coz signal is as it sud be and thnxx again a lot lot lot and lot to both of u for help
n guess i can contact u in future if need arises through pm and again thanks for the help

MD0038 said:
everything done as u told n things are just awsome njoying the new rom and typing from my note 2 and ya didnt flash modem u gave in dn3 thread I guess nd1 or sth coz signal is as it sud be and thnxx again a lot lot lot and lot to both of u for help
n guess i can contact u in future if need arises through pm and again thanks for the help
Click to expand...
Click to collapse
Awesome! Enjoy the DN3 ROM and you can get in touch with me either by PM or by posting in DN3 ROM and mentioning my name (i hope you know how to do that?) if you don't here's how you do it type @ then right next to @ type my username singhpratik87 (no space between @ and singhpratik87) and post a comment. There are many people over at DN3 thread who would help you out incase i amnot able to get back to you soon .

[Q] Messed out with kernel

I installed phanton rom in my galaxy note 2:http://forum.xda-developers.com/showthread.php?p=53186079
Then i thought of installing Perseus Kernel download it from here:http://galaxynote2root.com/t-mobile...e-2-attt-mobilesprintverizongt-n7100gt-n7105/
now i see a message showing can't boot......firmware recovery open kies to recover firmware but kies doesn't tell my device as added
also i tried to flash stock rom with odin3.09 but that also failed to complete process twice
Plz help

did u try with the latest build of stock firmware ??

Fixed thanks
devil_slayer said:
did u try with the latest build of stock firmware ??
Click to expand...
Click to collapse
it worked with lil search

[Q] need help urgently please :'(

i don't know how i did that stupid thing ! i'm using note 2 gt-n7100 ( rooted ) i tried to install a new rom that doesn't built for my phone with " mobile odin v 4.2 pro unfortunately it flashed the sumsung star dous stock rom on my mobile but it doesn't boot .. i entered the philz touch recovery menu and select clean to install a new rom and restore my old rom and the problems started to appear !
the first thing is when i press the power button to lock my note 2 and try to open it again i find no response at all and the only way is to remove the battery and re turn it on again and try not to press the lock button as if i do so my mobile gives me no response and the screen doesn't turn on !
the second matter i noticed that when the start up i found the bluetooth icon trying to turn to green like i'm turning the bluetooth on but a few seconds it didn't turn on even i try to turn it ! the bluetooth doesn't work at all !
the third thing when i recieve a call that turn on the proximty sensor automatically if i touch the sensor the screen go black but i lose the control and give me no response at all and i have to remove the battery and turn it on again !
the things i noticed when i flashed the galaxy star rom with mobile odin that it has partion called param and the note to doesn't have it with its rom but have partion called modem which i didn't found in the galaxy star rom !
i need help please how i delete things that caused that conflict .. i tried to reflash the stock rom of my note with odin on my lap top but nothig changed and it hanging and the screen freezes with no control at all and that happened when i try to use a custom rom and flash it through the recovery .. please help urgently
sorry for my bad english

Two options I see:
1. Try to restore your device using Kies3
2. Flash newest firmware (get it from sammobile) for your region using PC-Odin.

Putting "need help urgently please :'(" does not help you in any way, in fact it makes it more likely that people will simply ignore the topic. Topic titles need to be descriptive, not generic non-descriptive.
Your problem is that like many newbies you cant be bothered to do research, read and learn before messing around with your device.
You should boot into download mode and flash a stock rom. Preferably a older one that doesn't have knox. Then flash a stock rom(without knox) in recovery mode. All the info you need is here on forum.

Androidwizzard said:
Two options I see:
1. Try to restore your device using Kies3
2. Flash newest firmware (get it from sammobile) for your region using PC-Odin.
Click to expand...
Click to collapse
i forgot to tell that one of the things changed that my mobile lost the usb support in the normal mode as there is no change when i connect it to my pc except it charges only but it works in the download mode and when i reflash the stock rom v 4.3 the screen freezes after a few seconds of turning it on and i have to remove the battery .. do you think that flashing the 4.4.2 sthock rom will make a change ? as the solution of kies isn't possible due to the lack of usb support !
is there a way to format the sectors that the pation " param " which flashed by the sumsung star dous stock rom is in it and make that conflict to delete that ??

What was your last stock rom on your device before messing up?
I do absolutely not agree with those horror tales about knox, most people don't use and easily get rid of.
Do you remember your last bootloader? MK4 or above? Then don't take any risk by flashing 4.3 firmware and go straight ahead to 4.4.2.
It will be the safest way to get a working device again.

TheATHEiST said:
Putting "need help urgently please :'(" does not help you in any way, in fact it makes it more likely that people will simply ignore the topic. Topic titles need to be descriptive, not generic non-descriptive.
Your problem is that like many newbies you cant be bothered to do research, read and learn before messing around with your device.
You should boot into download mode and flash a stock rom. Preferably a older one that doesn't have knox. Then flash a stock rom(without knox) in recovery mode. All the info you need is here on forum.
Click to expand...
Click to collapse
i'm sorry for the way i show my problem as i'm a newbie already .. it that possible to downgrade my rom ? i will try install 4.1.2 rom then flasing the 4.4.2 one but when i flashed the 4.3 stock rom the screen freezes and nothing changed what do you think of that ? it there's a way to delete the " param " found in the sumsung galaxy star dous rom ? i think that made this conflict but try to explain to me why flashing an old rom then a new one without knox ? what will that do ?

Androidwizzard said:
What was your last stock rom on your device before messing up?
I do absolutely not agree with those horror tales about knox, most people don't use and easily get rid of.
Do you remember your last bootloader? MK4 or above? Then don't take any risk by flashing 4.3 firmware and go straight ahead to 4.4.2.
It will be the safest way to get a working device again.
Click to expand...
Click to collapse
i was using dn3 rom which has android version v 4.4.2 but i enter the recovery and restored the stock rom v 4.3 and it works with no problem and it was the last rom i use it when i flashed the star dous rom through the mobile odin in my mobile .. is there is a things i must do when i'm flashin the rom through the pc odin ? like check the repartion option or some thing else ?
my bootloader version is : n7100xxuena1 what that mean ?

omar youssef said:
i was using dn3 rom which has android version v 4.4.2 but i enter the recovery and restored the stock rom v 4.3 and it works with no problem and it was the last rom i use it when i flashed the star dous rom through the mobile odin in my mobile .. is there is a things i must do when i'm flashin the rom through the pc odin ? like check the repartion option or some thing else ?
my bootloader version is : n7100xxuena1 what that mean ?
Click to expand...
Click to collapse
So you can also try the NA1 firmware, but nothing beneath that. NA1 is a knox enabled BL, so whatever you flash successfully will have Knox in it.
DON'T TICK REPARTITION!

Androidwizzard said:
So you can also try the NA1 firmware, but nothing beneath that. NA1 is a knox enabled BL, so whatever you flash successfully will have Knox in it.
DON'T TICK REPARTITION!
Click to expand...
Click to collapse
what you mean of the NA1 firmware if you mean the 4.3 stock rom i flashed it with the pc odin and my mobile screen freezes as i told you and nothing changed .. give me obvious steps 1 2 3 to do it to solve this problem and if you can give me a suitable download links .. now you know all the issues with my mobile and thanks for your interst

omar youssef said:
what you mean of the NA1 firmware if you mean the 4.3 stock rom i flashed it with the pc odin and my mobile screen freezes as i told you and nothing changed .. give me obvious steps 1 2 3 to do it to solve this problem and if you can give me a suitable download links .. now you know all the issues with my mobile and thanks for your interst
Click to expand...
Click to collapse
1) Go to Sammobile
2) Find firmware for your region -> download
3) Find Odin 3.09 -> download and install
4) Start Odin 3.09
5) Plugin device -> see if Odin displays active com port
6) Go into download mode
7) Link firmware download in tab PDA/AP
8) Let Odin check md5
9) Press start button
10) Wait until display of com port in Odin turns green and says success.
All these steps could also be found with an easy Google search or in Youtube tutorials

Androidwizzard said:
1) Go to Sammobile
2) Find firmware for your region -> download
3) Find Odin 3.09 -> download and install
4) Start Odin 3.09
5) Plugin device -> see if Odin displays active com port
6) Go into download mode
7) Link firmware download in tab PDA/AP
8) Let Odin check md5
9) Press start button
10) Wait until display of com port in Odin turns green and says success.
All these steps could also be found with an easy Google search or in Youtube tutorials
Click to expand...
Click to collapse
Thanks for your work but I did all these steps but my mobile freezes and noying changed fir sorry .. I flashed the 4.4.2 kitkat stock rom which is the latest one !

omar youssef said:
Thanks for your work but I did all these steps but my mobile freezes and noying changed fir sorry .. I flashed the 4.4.2 kitkat stock rom which is the latest one !
Click to expand...
Click to collapse
OK, I see. Try a wipe from stock recovery, wipe all possible.
Another option: Kies!
I know, you said not recognized but you must get it to work. Uninstall all drivers from PC an re-install drivers until Kies can restore your device.
Very last option: Find a Samsung repair near to you.

Androidwizzard said:
OK, I see. Try a wipe from stock recovery, wipe all possible.
Another option: Kies!
I know, you said not recognized but you must get it to work. Uninstall all drivers from PC an re-install drivers until Kies can restore your device.
Very last option: Find a Samsung repair near to you.
Click to expand...
Click to collapse
Look I searched the internet find something I think it will be useful if we can use it successfully called n7100 rescue rom consists of 5 files in one zip file it is the fully original factory rom but unfortunately it's 4.1.2 jellybean so how can I flash this rom successfully ? Is it possible downgrade the bootloader first or what ?? Please help

omar youssef said:
Look I searched the internet find something I think it will be useful if we can use it successfully called n7100 rescue rom consists of 5 files in one zip file it is the fully original factory rom but unfortunately it's 4.1.2 jellybean so how can I flash this rom successfully ? Is it possible downgrade the bootloader first or what ?? Please help
Click to expand...
Click to collapse
As you mentioned you already have been on NA1 firmware and as it seems you have flashed latest 4.4.2 with "a kind of success" I find it hope- and useless to even try this rescue rom. Bootloader is the reason why you can't successfully flash. NO DOWNGRADE POSSIBLE.

Androidwizzard said:
As you mentioned you already have been on NA1 firmware and as it seems you have flashed latest 4.4.2 with "a kind of success" I find it hope- and useless to even try this rescue rom. Bootloader is the reason why you can't successfully flash. NO DOWNGRADE POSSIBLE.
Click to expand...
Click to collapse
Can you illustrate your words ? For kies it's unpossible to connect my mobile to any pc the drivers works perfectly for any similarphone the fault is in my mobile not the driver and for sumsung care it will be high cost as the warranty ended ! And I wipe every thing possible through the stock recovery but noyhing changed !

I am beginning to lose my patience cause you don't follow my advice or even don't consider that I am right.
Look into system on your PC if there is an unknown device.
Whenever hardware is connected to PC Windows starts to search for drivers.
It doesn't matter that other devices are recognized correctly.
Wipe all Samsung drivers and re-install. Even re-install Kies too.
Start Kies and try restoration, maybe it will fail, but try. AND with current drivers you are supposed to fail.
At last: Try to find a friend with knowledge who can help you at your home or his.

[Q] Why cant I install 4.2.2 ROM's

Hi, I am a rooted Samsung Galaxy Duos i9082, with a Paranoid 4.4.4 Kitkat Rom. Now recently i tried to go back to stock but was unsuccessful. I tried to install the CM10.1 Based MIUI we have for our phones, But was unsuccessful again. What the problem is that when i try to boot after flashing a 4.2.2 ROM .. It's stuck on the Samsung Galaxy Logo and wont go further even after 30 minutes. Later that day i tried reinstalling Paranoid 4.4.4 kitkat ROM and it boot up in a Jiffy. If anyone can provide me with a solution I would be really grateful. I really wanna use the Stock rom again !

Draconius007 said:
Hi, I am a rooted Samsung Galaxy Duos i9082, with a Paranoid 4.4.4 Kitkat Rom. Now recently i tried to go back to stock but was unsuccessful. I tried to install the CM10.1 Based MIUI we have for our phones, But was unsuccessful again. What the problem is that when i try to boot after flashing a 4.2.2 ROM .. It's stuck on the Samsung Galaxy Logo and wont go further even after 30 minutes. Later that day i tried reinstalling Paranoid 4.4.4 kitkat ROM and it boot up in a Jiffy. If anyone can provide me with a solution I would be really grateful. I really wanna use the Stock rom again !
Click to expand...
Click to collapse
its to easy i face this my self and i solved it by myself too
first when u download 4.2.2 zip download it direct to phone or pc but move it to sdcard with card reader not cable :good:
in recovery make full format
tell me if this work

Don Anas said:
its to easy i face this my self and i solved it by myself too
first when u download 4.2.2 zip download it direct to phone or pc but move it to sdcard with card reader not cable :good:
in recovery make full format
tell me if this work
Click to expand...
Click to collapse
Thanks a lot ... I have a question tho ... When i download the ROM.. do i keep it on the internal storage and the transfer to SD card via any file manager and then flash ? Because i flashed roms .... but i couldnt boot ... But 4.4 roms easily install ... I am on Carbon 4.4.4 now ...

Draconius007 said:
Thanks a lot ... I have a question tho ... When i download the ROM.. do i keep it on the internal storage and the transfer to SD card via any file manager and then flash ? Because i flashed roms .... but i couldnt boot ... But 4.4 roms easily install ... I am on Carbon 4.4.4 now ...
Click to expand...
Click to collapse
yes u can
tell me u try to falsh TouchWiz Revolution 4.2.2 right ??

Don Anas said:
yes u can
tell me u try to falsh TouchWiz Revolution 4.2.2 right ??
Click to expand...
Click to collapse
Yes ... Yes I was !

Draconius007 said:
Yes ... Yes I was !
Click to expand...
Click to collapse
Hhhhh I know it bro just change the ROM name toTouchWizRevolution and flash it it well work
Tell me result

Don Anas said:
Hhhhh I know it bro just change the ROM name toTouchWizRevolution and flash it it well work
Tell me result
Click to expand...
Click to collapse
Dude ... I tried it ... The rom flashed ... But it wont boot up at all !!

Draconius007 said:
Hi, I am a rooted Samsung Galaxy Duos i9082, with a Paranoid 4.4.4 Kitkat Rom. Now recently i tried to go back to stock but was unsuccessful. I tried to install the CM10.1 Based MIUI we have for our phones, But was unsuccessful again. What the problem is that when i try to boot after flashing a 4.2.2 ROM .. It's stuck on the Samsung Galaxy Logo and wont go further even after 30 minutes. Later that day i tried reinstalling Paranoid 4.4.4 kitkat ROM and it boot up in a Jiffy. If anyone can provide me with a solution I would be really grateful. I really wanna use the Stock rom again !
Click to expand...
Click to collapse
Its a Bootloader issue. Kitkat rom needs 4.2.2 bootloader while cm 10.1 or miui based on it requires 4.1.2 bootloader. This means you need 4.1.2 stock rom on phone before you install cm 10.1 miui rom
Thats why cm10.1 based miui is not booting up while Kitkat based roms are booting fine.
Developer of touchwiz revolution has stated that rom boots on 4.2.2 or 4.4.2 based rom
Have u tried wiping data, cache?
If yes and rom still doesn't boot. Then I suggest you to flash stock firmware though Odin. Let it boot again. And then install the recovery again via odin
Odin v3.04 is recommended.
Now you have a rooted phone and Kitkat based rom then while flashing touchwiz revolution 4.2.2
I will suggest you to format /system, /data, /cache through the recovery Then flash the TW revorevolution 4.2.2 rom.

Draconius007 said:
Dude ... I tried it ... The rom flashed ... But it wont boot up at all !!
Click to expand...
Click to collapse
dude its not bootloader issue im sure did u try chang recovery ???
did u try to flash another 4.2.2 rom ??
this rom have alot issues try GENNXT SUPERIOR ROM its good rom