I installed phanton rom in my galaxy note 2:http://forum.xda-developers.com/showthread.php?p=53186079
Then i thought of installing Perseus Kernel download it from here:http://galaxynote2root.com/t-mobile...e-2-attt-mobilesprintverizongt-n7100gt-n7105/
now i see a message showing can't boot......firmware recovery open kies to recover firmware but kies doesn't tell my device as added
also i tried to flash stock rom with odin3.09 but that also failed to complete process twice
Plz help
did u try with the latest build of stock firmware ??
Fixed thanks
devil_slayer said:
did u try with the latest build of stock firmware ??
Click to expand...
Click to collapse
it worked with lil search
Related
Hi Guys.
Clockwork doesnt seem to install any roms on my GT-19082l for some reason.
When i click on a rom, it says that package is installed but when I reboot the phone, it's stuck at the "samsung galaxy grand" page.
Wat do?
migloredan said:
Hi Guys.
Clockwork doesnt seem to install any roms on my GT-19082l for some reason.
When i click on a rom, it says that package is installed but when I reboot the phone, it's stuck at the "samsung galaxy grand" page.
Wat do?
Click to expand...
Click to collapse
First tell which Rom u tried flashing and on which firmware u were!!!
Sent from my GT-I9082 using Tapatalk 4
migloredan said:
Hi Guys.
Clockwork doesnt seem to install any roms on my GT-19082l for some reason.
When i click on a rom, it says that package is installed but when I reboot the phone, it's stuck at the "samsung galaxy grand" page.
Wat do?
Click to expand...
Click to collapse
Take the recovery .tar file from here according to your firmware (4.1.2 or 4.2.2) : http://forum.xda-developers.com/showthread.php?t=2315529
Then follow this step by step instructions : http://forum.xda-developers.com/showpost.php?p=46395577&postcount=19
This will have to be done each time you flash a firmware through Odin.
If after flashing you get a bootloop, simply boot into recovery and clear cache and dalvik cache and you'll be good :good:
iceyhotguy said:
Take the recovery .tar file from here according to your firmware (4.1.2 or 4.2.2) : http://forum.xda-developers.com/showthread.php?t=2315529
Then follow this step by step instructions : http://forum.xda-developers.com/showpost.php?p=46395577&postcount=19
This will have to be done each time you flash a firmware through Odin.
If after flashing you get a bootloop, simply boot into recovery and clear cache and dalvik cache and you'll be good :good:
Click to expand...
Click to collapse
Sorry for the late reply, been busy with school.
But will this work with the GT-i9082l? I know some firmware doesn't work with other variants of this phone.
Also I have ClockworkMod Recovery 6.0.4.4 and I was trying to flash Cyanogen Mod 10.1 for the Grand.
Please Help
Guys please help.
migloredan said:
Sorry for the late reply, been busy with school.
But will this work with the GT-i9082l? I know some firmware doesn't work with other variants of this phone.
Also I have ClockworkMod Recovery 6.0.4.4 and I was trying to flash Cyanogen Mod 10.1 for the Grand.
Click to expand...
Click to collapse
Yea same will work for i9082L, just make sure the recovery you are using is compatible with 4.1.2 or 4.2.2, whichever you are flashing it on.
You can flash CM10.1 through any recovery you are using (but CM10.1 only works on 4.1.2 firmware)
iceyhotguy said:
Yea same will work for i9082L, just make sure the recovery you are using is compatible with 4.1.2 or 4.2.2, whichever you are flashing it on.
You can flash CM10.1 through any recovery you are using (but CM10.1 only works on 4.1.2 firmware)
Click to expand...
Click to collapse
Could I Put this on the sdcard instead of the internal memory?
Also this is what it says when ever i try to flash CM 10.1 or any other ROM
Finding update package...
Opening update Package...
Installing update...
Install from sdcard complete.
Then when I reboot the phone it stays at the Samsung Galaxy Grand page.
migloredan said:
Also this is what it says when ever i try to flash CM 10.1 or any other ROM
Finding update package...
Opening update Package...
Installing update...
Install from sdcard complete.
Then when I reboot the phone it stays at the Samsung Galaxy Grand page.
Click to expand...
Click to collapse
Yes you can put it on sd card.
Make sure you are on 4.1.2 before installing CM10.1, if you are not that's the reason for your bootloop.
And wipe data/cache/dalvik before flashing CM10.1 or any other ROM.
Still doesnt work. :crying:
It was stock 4.1.2, then I tried to update it to 4.2.2 using ODIN but it failed (This is the reason why i'm trying to install CM 10.1).
Is the phone 4.2.2 or 4.1.2?
migloredan said:
Still doesnt work. :crying:
It was stock 4.1.2, then I tried to update it to 4.2.2 using ODIN but it failed (This is the reason why i'm trying to install CM 10.1).
Is the phone 4.2.2 or 4.1.2?
Click to expand...
Click to collapse
Your firmware flash failed in the middle? If this happened you need to reflash the 4.1.2 firmware before you can flash any ROM on it.
iceyhotguy said:
Your firmware flash failed in the middle? If this happened you need to reflash the 4.1.2 firmware before you can flash any ROM on it.
Click to expand...
Click to collapse
Do you know where to get the firmware? Or a guide I can follow? Most download links are from hotfile and it shut down.
Thanks for helping btw.
migloredan said:
Do you know where to get the firmware? Or a guide I can follow? Most download links are from hotfile and it shut down.
Thanks for helping btw.
Click to expand...
Click to collapse
You can try searching the XDA threads or google, I don't know of any firmware mirrors for i9082L sorry
iceyhotguy said:
You can try searching the XDA threads or google, I don't know of any firmware mirrors for i9082L sorry
Click to expand...
Click to collapse
I found firmware on sam mobile, will try it out.
Hope this works. :fingers-crossed:
Hey Guys i just updated my Galaxy Grand Duos to Official firmware by a software update recently and whenever i try to go to the Download mode it shows a error
After flashing the latest Firmware (4.2.2) for the Galaxy Grand , in my Download Mode I get this RED PROMPT:
! Current eMMC firm version
! [VHX_21nm_3bitMLC_8GB_p10]
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Because of this error i cant even root my phone bcuz Odin stops and fails everytime i try to flash CWM.
I just need help to remove this error plss guys :fingers-crossed:
Must have been asked a million times.
This is no error. It's just a message showing your current emmc version.
Sent from my GT-I9082 using Tapatalk Pro
And on cm11 latest build(dual sim)
9447 68548343
Ateekujjawal said:
Must have been asked a million times.
This is no error. It's just a message showing your current emmc version.
Sent from my GT-I9082 using Tapatalk Pro
And on cm11 latest build(dual sim)
Click to expand...
Click to collapse
but whenever i try to flash CWM through Odin it always fails
darryl1234 said:
Hey Guys i just updated my Galaxy Grand Duos to Official firmware by a software update recently and whenever i try to go to the Download mode it shows a error
After flashing the latest Firmware (4.2.2) for the Galaxy Grand , in my Download Mode I get this RED PROMPT:
! Current eMMC firm version
! [VHX_21nm_3bitMLC_8GB_p10]
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Because of this error i cant even root my phone bcuz Odin stops and fails everytime i try to flash CWM.
I just need help to remove this error plss guys :fingers-crossed:
Click to expand...
Click to collapse
This could be happening due to several reasons,
- you might have renamed the tar file, or have a corrupted download. Both of these would cause a checksum error in odin
- the image might not be packed properly, you might want to download the ones made on newer firmwares like 6.0.4.5 by pawitp or 6.0.3.6 by Mohanshbhr.
It would be helpful if you could post the fail message from Odin here and the source links/names of the files you are using.
Ateekujjawal is right, it's not an error, just a notification informing you of your current system.
FYI, only the latest firmwares have the emmc notification. If you were to flash even the November firmware builds of 4.2.2, you wouldn't have it at all.
iceyhotguy said:
This could be happening due to several reasons,
- you might have renamed the tar file, or have a corrupted download. Both of these would cause a checksum error in odin
- the image might not be packed properly, you might want to download the ones made on newer firmwares like 6.0.4.5 by pawitp or 6.0.3.6 by Mohanshbhr.
It would be helpful if you could post the fail message from Odin here and the source links/names of the files you are using.
Ateekujjawal is right, it's not an error, just a notification informing you of your current system.
FYI, only the latest firmwares have the emmc notification. If you were to flash even the November firmware builds of 4.2.2, you wouldn't have it at all.
Click to expand...
Click to collapse
hey bro thanks for helping:good:
No Error
im still facing the same issue as the CMW is not getting installed please help.
im still facing the same issue as the CMW is not getting installed please help. while tring to restart in CMW it give a error as no Command
rhtkadam said:
im still facing the same issue as the CMW is not getting installed please help. while tring to restart in CMW it give a error as no Command
Click to expand...
Click to collapse
Just go here for the answer http://forum.xda-developers.com/showthread.php?t=2772170
Hey guys i need some help. I took out my old Galaxy Grand Duos and thought about rooting it to get Android Kitkat ( I have an International version which has never been rooted before ). I rooted it successfully however I am facing problem with the CWM recovery. When i first installed it I was getting the 'No Command" error. I read on XDA that I need to perform a battery pull in order to get the CWM working. I did that and it worked but it only works when I use odin to flash it. Otherwise when ever I enter recovery I get the 'No Command' error. What should I do?
Secondly im trying to install this rom http://forum.xda-developers.com/showthread.php?t=2563557 . When i get the CWM working (by flashing it with Odin) there seems to be an error which prevents me from flashing this rom. The message I get is *Cant install this package on top of incapable data. Please try another package or run a factory reset. Error in (the file location and name) (Status 7) Installation aborted*
Thanks in advance
Can u tell us how did u root ur phone?
Trilochanaaya said:
Can u tell us how did u root ur phone?
Click to expand...
Click to collapse
Thanks for the reply and sure. Here is the link
http://www.youtube.com/watch?v=jm1ssFkEaN0
metalmouth22 said:
Thanks for the reply and sure. Here is the link
http://www.youtube.com/watch?v=jm1ssFkEaN0
Click to expand...
Click to collapse
You need to have latest recovery to flash.
Any latest recovery has SE Linux support. Choose latest version or build of your choice from below threads and flash it using your recovery..
http://forum.xda-developers.com/galaxy-grand-duos/development/recovery-twrp-t2839237
http://forum.xda-developers.com/showthread.php?t=2437182
http://forum.xda-developers.com/showthread.php?t=2725019
Trilochanaaya said:
You need to have latest recovery to flash.
Any latest recovery has SE Linux support. Choose latest version or build of your choice from below threads and flash it using your recovery..
http://forum.xda-developers.com/show....php?t=2437182
http://forum.xda-developers.com/gala...-twrp-t2839237
http://forum.xda-developers.com/show....php?t=2725019
Click to expand...
Click to collapse
Thanks, ill try this right now. Btw before making this thread i tried to download CWM's latest version from its website but it was not downloading properly. I guess the download file was incomplete.
Trilochanaaya said:
You need to have latest recovery to flash.
Any latest recovery has SE Linux support. Choose latest version or build of your choice from below threads and flash it using your recovery..
http://forum.xda-developers.com/show....php?t=2437182
http://forum.xda-developers.com/gala...-twrp-t2839237
http://forum.xda-developers.com/show....php?t=2725019
Click to expand...
Click to collapse
These links are not working =/
metalmouth22 said:
These links are not working =/
Click to expand...
Click to collapse
Check now. Links fixed!
I am currently on dn4 v2.1 and want ot get back to stock please someone help me will be really glad
can i use this method
http://forum.xda-developers.com/showthread.php?t=2088809
advance thankssss
MD0038 said:
I am currently on dn4 v2.1 and want ot get back to stock please someone help me will be really glad
can i use this method
http://forum.xda-developers.com/showthread.php?t=2088809
advance thankssss
Click to expand...
Click to collapse
Step1- Download Stock ROM from SAMMOBILE (for your device)
Step2- since you are in DN4... you would be having custom ROM -- clean your device by formating system/data/cache/etc etc
Step3- go to download mode (volume down+menu+power) and connect to your PC where ODIN is running...ensure you have Samsung USB driver installed on your PC
Step4- flash stock ROM downloaded in step 1
that is it....
Cheers
Ashtwinks said:
Step1- Download Stock ROM from SAMMOBILE (for your device)
Step2- since you are in DN4... you would be having custom ROM -- clean your device by formating system/data/cache/etc etc
Step3- go to download mode (volume down+menu+power) and connect to your PC where ODIN is running...ensure you have Samsung USB driver installed on your PC
Step4- flash stock ROM downloaded in step 1
that is it....
Cheers
Click to expand...
Click to collapse
wont it delete efs modem n stuff
jus being sure coz android version in mobile shows 4.4.4 and sammobile shows 4.4.2 and i have some different bootloader
MD0038 said:
wont it delete efs modem n stuff
jus being sure coz android version in mobile shows 4.4.4 and sammobile shows 4.4.2 and i have some different bootloader
Click to expand...
Click to collapse
No It wont.... System, Data, Internal storage are the ones you should clean up when ever you change your ROM...
Samsung stopped at 4.4.2 for Note 2
DN4.2 is TOUCHWIZ at 4.4.4 (SG3 base ROM)
CM12.1 is AOSP, 5.1.1 r8
hey , i recently try to update my gs6 with custom rom ( i bought it with custom rom) in settings show g920f but in download mode show g920p , so i flashed with stock rom 6.0.1 release yesterday , i found it in sammobile.com , i flashed with odin , now i stiil have recovery mode with this meesage : dm-verity verification failed/need to check drk first
please tell me any solution for this ?
Anyluck have you Wiped it in recorvery and the caches. Maybe try the 6.0.1 from the thread here in sprint s6 forum's.
Jimmy1life said:
Anyluck have you Wiped it in recorvery and the caches. Maybe try the 6.0.1 from the thread here in sprint s6 forum's.
Click to expand...
Click to collapse
i try also this rom ALL_SPT_G920PVPU3CPB6_G920PSPT3CPB6_CL7280193_QB8664149_REV02_user_low_ship.tar
always same probleme :/ any solution ?
Saafir said:
My first suggestion would be figure out what the device actually is before you go flashing stuff.
Click to expand...
Click to collapse
now i cant install stock rom 6.0 ? i think i must flash with unikernel but i dont know how i procede for the flash , thanks to answer me
Saafir said:
Look on the back of your phone, at the bottom, and confirm it is a 920P.
If so, head over to the General section and there you will find all the guides and info you need.
Click to expand...
Click to collapse
yes its g920p , you can give me the link for solve my problem please ?
i try flash my phone with lollipop 5.1.1 G920PVPU3BOL1_G920PSPT3BOL1_G920PVPU3BOL1_HOME.tar.md5 , after i flash kernel with , S6_UniKernel_v8-0002-ODIN , but my digital screen not work :/
racimrl said:
i try flash my phone with lollipop 5.1.1 G920PVPU3BOL1_G920PSPT3BOL1_G920PVPU3BOL1_HOME.tar.md5 , after i flash kernel with , S6_UniKernel_v8-0002-ODIN , but my digital screen not work :/
Click to expand...
Click to collapse
Try and get into Download Mode and flash the MM.tar in this thread
http://forum.xda-developers.com/spr...nt/tool-utility-twrp-3-0-0-1-teamwin-t3335260
Link is in OP.
i try this , but after install su2.66 i still have no signal :/
any idea ?