Develop Bugs

[Q] Firmware upgrade issue. Can't open.

First of all sorry for my bad English.
I have a device with 4.3
When i was trying to root that device a problem happened and odin crushed. After that my device couldnt open. "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" massage is on screen.
And
On download mode is
Custom Binary Download : Yes (1 counts)
Current Binary : Custom
System Status : Custom
Knox Warranty Void : 1
Ap Swrev : A2
How can i install new firmware. Please help. Can i odin any stock rom?
I have no other telephone so i'm in big trouble.

Don't panic.
Just download ODIN flashable Stock Firmware which should be higher than MK4. Flash it carefully through PC ODIN and you should be good.
Once your phone boots normally to new ROM, reboot once again.
Then switch off, start in Download Mode and flash PhilZ (or whichever you like) recovery through PC ODIN.
After it you can flash any Custom ROM (they all are prerooted).
Good Luck !!!
Edit:
Check this http://forum.xda-developers.com/showthread.php?t=2536423

silentvisitor said:
Don't panic.
Just download ODIN flashable Stock Firmware which should be higher than MK4. Flash it carefully through PC ODIN and you should be good.
Once your phone boots normally to new ROM, reboot once again.
Then switch off, start in Download Mode and flash PhilZ (or whichever you like) recovery through PC ODIN.
After it you can flash any Custom ROM (they all are prerooted).
Good Luck !!!
Edit:
Check this http://forum.xda-developers.com/showthread.php?t=2536423
Click to expand...
Click to collapse
thank you for your attention. Can you give me an example Stock firmware higher than MK4. I tried one and failed. Sorry for bothering u

Like ML3, ML4 or ML6.
How it failed? What Error message?
Nothing like bothering. I will be happy if I could be of any help to you or anyone here

silentvisitor said:
Like ML3, ML4 or ML6.
How it failed? What Error message?
Nothing like bothering. I will be happy if I could be of any help to you or anyone here
Click to expand...
Click to collapse
I tried to install N7100XXUEMK9_N7100PHNEMK2_N7100XXUEMJ9_HOME.tar and from odin 3.07 pda input. Than failed. Unsupported version shows up on my screen download mode.
I'm downloading N7100XXUEMK4_N7100ODDEMK1_N7100DDEMJ9_INU.zip is that works? Maybe ypu can lough but i cant understand which one is higher than MK4 If it's wrong, could you give me correct link of version? Sorry again and again. I'm in trouble with english instructions. :/

could anyone give me any stock rom link that higher than MK4 please :/

i tried to install that rom : http://forum.xda-developers.com/showthread.php?t=2531989
but same issue again. i'm downloading rom than putting odins PDA coulmn but i cant install. FAIL and, unssupported version.
please help me am i doing wrong? what must i do?

frendlyy said:
i tried to install that rom : http://forum.xda-developers.com/showthread.php?t=2531989
but same issue again. i'm downloading rom than putting odins PDA coulmn but i cant install. FAIL and, unssupported version.
please help me am i doing wrong? what must i do?
Click to expand...
Click to collapse
Silly question, but have you tried
removing battery and rebooting?
booting into download mode or stock recovery?

tweeny80 said:
Silly question, but have you tried
removing battery and rebooting?
booting into download mode or stock recovery?
Click to expand...
Click to collapse
i tried but it didnt work that time.
After that day i found a rom which "SMA-N7100XXUEML3-20131219143048" i tried to flash with odin and worked.
I solved my issue with our helps, thank u.

same problem
ok

[Q] Messed out with kernel

I installed phanton rom in my galaxy note 2:http://forum.xda-developers.com/showthread.php?p=53186079
Then i thought of installing Perseus Kernel download it from here:http://galaxynote2root.com/t-mobile...e-2-attt-mobilesprintverizongt-n7100gt-n7105/
now i see a message showing can't boot......firmware recovery open kies to recover firmware but kies doesn't tell my device as added
also i tried to flash stock rom with odin3.09 but that also failed to complete process twice
Plz help

did u try with the latest build of stock firmware ??

Fixed thanks
devil_slayer said:
did u try with the latest build of stock firmware ??
Click to expand...
Click to collapse
it worked with lil search

Problem with CWM and Flashing Custom Roms

Hey guys i need some help. I took out my old Galaxy Grand Duos and thought about rooting it to get Android Kitkat ( I have an International version which has never been rooted before ). I rooted it successfully however I am facing problem with the CWM recovery. When i first installed it I was getting the 'No Command" error. I read on XDA that I need to perform a battery pull in order to get the CWM working. I did that and it worked but it only works when I use odin to flash it. Otherwise when ever I enter recovery I get the 'No Command' error. What should I do?
Secondly im trying to install this rom http://forum.xda-developers.com/showthread.php?t=2563557 . When i get the CWM working (by flashing it with Odin) there seems to be an error which prevents me from flashing this rom. The message I get is *Cant install this package on top of incapable data. Please try another package or run a factory reset. Error in (the file location and name) (Status 7) Installation aborted*
Thanks in advance

Can u tell us how did u root ur phone?

Trilochanaaya said:
Can u tell us how did u root ur phone?
Click to expand...
Click to collapse
Thanks for the reply and sure. Here is the link
http://www.youtube.com/watch?v=jm1ssFkEaN0

metalmouth22 said:
Thanks for the reply and sure. Here is the link
http://www.youtube.com/watch?v=jm1ssFkEaN0
Click to expand...
Click to collapse
You need to have latest recovery to flash.
Any latest recovery has SE Linux support. Choose latest version or build of your choice from below threads and flash it using your recovery..
http://forum.xda-developers.com/galaxy-grand-duos/development/recovery-twrp-t2839237
http://forum.xda-developers.com/showthread.php?t=2437182
http://forum.xda-developers.com/showthread.php?t=2725019

Trilochanaaya said:
You need to have latest recovery to flash.
Any latest recovery has SE Linux support. Choose latest version or build of your choice from below threads and flash it using your recovery..
http://forum.xda-developers.com/show....php?t=2437182
http://forum.xda-developers.com/gala...-twrp-t2839237
http://forum.xda-developers.com/show....php?t=2725019
Click to expand...
Click to collapse
Thanks, ill try this right now. Btw before making this thread i tried to download CWM's latest version from its website but it was not downloading properly. I guess the download file was incomplete.

Trilochanaaya said:
You need to have latest recovery to flash.
Any latest recovery has SE Linux support. Choose latest version or build of your choice from below threads and flash it using your recovery..
http://forum.xda-developers.com/show....php?t=2437182
http://forum.xda-developers.com/gala...-twrp-t2839237
http://forum.xda-developers.com/show....php?t=2725019
Click to expand...
Click to collapse
These links are not working =/

metalmouth22 said:
These links are not working =/
Click to expand...
Click to collapse
Check now. Links fixed!

HUGE Problem with s4 mini GT-9195

I recently rooted my I9195 successfully. i then flashed a custom kernel i found here on the forum (kernel v1 or sth like that) then my phone wouldn go past the boot white logo screen. i then tried flashing other kernels but they were apparently wrong as some features of my phone didnt work. i finally found the right firmware for my phone and tried to flash it with odin but it failed and now my phone only shows this message where it says that the firmware update failed and i have to use kies in recovery mode.
so i use kies and try the install firmware thing that asks you to put in your model and serial number. i do that and it says the device doesnt support initialisation. tried on another computer and it said that serial number was invalid.. i was very careful when typing it etc.
help.. what do i do?
btw last firmware i had was 4.4.2

Silvershot said:
I recently rooted my I9195 successfully. i then flashed a custom kernel i found here on the forum (kernel v1 or sth like that) then my phone wouldn go past the boot white logo screen. i then tried flashing other kernels but they were apparently wrong as some features of my phone didnt work. i finally found the right firmware for my phone and tried to flash it with odin but it failed and now my phone only shows this message where it says that the firmware update failed and i have to use kies in recovery mode.
so i use kies and try the install firmware thing that asks you to put in your model and serial number. i do that and it says the device doesnt support initialisation. tried on another computer and it said that serial number was invalid.. i was very careful when typing it etc.
help.. what do i do?
btw last firmwar i had was 4.4.2
Click to expand...
Click to collapse
I think you should put original back and start over and read forum more howto.
You use ODIN to flash custom rom, why? ODIN is for original rom. With custom rom need use TWRP or other recovery boot.

S3miniFin said:
I think you should put original back and start over and read forum more howto.
You use ODIN to flash custom rom, why? ODIN is for original rom. With custom rom need use TWRP or other recovery boot.
Click to expand...
Click to collapse
I used ODIN for past phones to flash custom kernels and it worked fine. i said i flashed someone that isnt supposed to be supported. i have no idea. i am not an expert and i thought someone can provide with a fast fix since there will surely be someone to have experienced this issue.
anyone else?

bump! please help.. i dont have another phone and I need to get this fixed asap!

You don't need root phone before new kernel or custom rom. And i believe you use wrong files for that and now phone wont boot.
Start over with original ROM. With that you can test is your phone ok. Then use ODIN for recovery kernel and custom rom. Also check this:http://forum.xda-developers.com/showthread.php?t=2678420

S3miniFin said:
You don't need root phone before new kernel or custom rom. And i believe you use wrong files for that and now phone wont boot.
Start over with original ROM. With that you can test is your phone ok. Then use ODIN for recovery kernel and custom rom. Also check this:http://forum.xda-developers.com/showthread.php?t=2678420
Click to expand...
Click to collapse
check my attached image.. i cant flash anything with odin. it gives me error fused 2 > binary 1

Silvershot said:
check my attached image.. i cant flash anything with odin. it gives me error fused 2 > binary 1
Click to expand...
Click to collapse
How about download-mode? Never seen ODIN-mode myself, so cannot understand what is going on there....
With download- mode i do all things with ODIN if need...

S3miniFin said:
How about download-mode? Never seen ODIN-mode myself, so cannot understand what is going on there....
With download- mode i do all things with ODIN if need...
Click to expand...
Click to collapse
that works, and it says downloading like normally when you try to flash something with odin, but it fails and gives me this error again: sw rev check fail: fused 2 > binarz 1
the rom im trying to flash is the DBT one in germany.
I am choosing AP btw, and not the other flash options.

S3miniFin said:
You don't need root phone before new kernel or custom rom. And i believe you use wrong files for that and now phone wont boot.
Start over with original ROM. With that you can test is your phone ok. Then use ODIN for recovery kernel and custom rom. Also check this:http://forum.xda-developers.com/showthread.php?t=2678420
Click to expand...
Click to collapse
i flashed one of those roms and i got my phone to boot. i have no wifi. i guess it was the last rom i flashed which was the wrong one.
i now tried the one which is supposed to be the correct rom but i land on the same error again. can someone help me find the correct stock rom?
here are the current device info. it seems that there is no official 4.4.2 rom for my phone. so i ****ed up lol.

Your phone has official 4.4.2 Rom and you are currently using it. If you have Wi-Fi issues, your can try to flash custom kernel (Silviu, alexax)
Sent from my GT-I9190 using Tapatalk

Silvershot said:
that works, and it says downloading like normally when you try to flash something with odin, but it fails and gives me this error again: sw rev check fail: fused 2 > binarz 1
the rom im trying to flash is the DBT one in germany.
I am choosing AP btw, and not the other flash options.
Click to expand...
Click to collapse
But why you use F.Reset Time -option? Clear that and try again.
---------- Post added at 12:12 AM ---------- Previous post was at 12:10 AM ----------
Silvershot said:
i flashed one of those roms and i got my phone to boot. i have no wifi. i guess it was the last rom i flashed which was the wrong one.
i now tried the one which is supposed to be the correct rom but i land on the same error again. can someone help me find the correct stock rom?
here are the current device info. it seems that there is no official 4.4.2 rom for my phone. so i ****ed up lol.
Click to expand...
Click to collapse
For Wifi problem could help if boot phone again after first setup.

ok now it wont go past the flashing SAMSUNG logo. i went and bought a huawei g play mini today. no more time trying to revive the s4 mini.
if someone wants to give it a try let me know and i'll ship it to you.

I will try it!
Plz sent me a PN (i'm german)
Sent from my GT-I9195 using XDA Free mobile app

S3miniFin said:
But why you use F.Reset Time -option? Clear that and try again.
---------- Post added at 12:12 AM ---------- Previous post was at 12:10 AM ----------
For Wifi problem could help if boot phone again after first setup.
Click to expand...
Click to collapse
i tried rebooting the phone but it still is as slow as before. it peaks on 27mbit when i start the speedtest but then drops down to 19 or sth..
actually the download speed seems to be the problem. not the upload. now i forgot the network and connected again and its even slower

HELP! I think i might of broken my S9

Hello
i was trying to install stock back onto my phone, i was finally able to find a image to flash but when using Odin it got stuck on the system part then failed.
now when i boot up the phone i get a message saying ONLY OFFICIAL RELEASED BINARIES ARE ALLOWED TO BE FLASHED!
I can only seem to get into download mode and nothing else if anyone can help me that would be amazing im really worried that it will not be able to be fixed!
(sorry for the grammar im kind of frantic that i wont be able to get it fixed so im trying to type fast.)

OVOXOVO said:
Hello
i was trying to install stock back onto my phone, i was finally able to find a image to flash but when using Odin it got stuck on the system part then failed.
now when i boot up the phone i get a message saying ONLY OFFICIAL RELEASED BINARIES ARE ALLOWED TO BE FLASHED!
I can only seem to get into download mode and nothing else if anyone can help me that would be amazing im really worried that it will not be able to be fixed!
(sorry for the grammar im kind of frantic that i wont be able to get it fixed so im trying to type fast.)
Click to expand...
Click to collapse
Don't worry you're not into too big of a problem. That download mode is all you need. Search around xda and flash the firmware for your model using odin.

Download the last firmware form you phone here: https://www.sammobile.com/firmwares/ and then flash it with the latest odin.

Option58 said:
Don't worry you're not into too big of a problem. That download mode is all you need. Search around xda and flash the firmware for your model using odin.
Click to expand...
Click to collapse
also get the newest Odin which is 3.13.1
FedericoPeranzi said:
Download the last firmware form you phone here: https://www.sammobile.com/firmwares/ and then flash it with the latest odin.
Click to expand...
Click to collapse
Frijas firmware downloader is about 40,000 times faster than going to the site directly