Related
my friend tried to root his T999 but messed up on a step im guessing so now his phone will boot straight to odin mode. i tried putting it in download mode and use odin3 to restore it back to stock but odin3 would get stuck at the "nand write start" stage. his phone says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." when it is powered up. does anybody know how to fix this issue?? any help would be great! i googled everything that i could think of and tried everything that was suggested but nothing works! thanks in advance!!
sushi829 said:
my friend tried to root his T999 but messed up on a step im guessing so now his phone will boot straight to odin mode. i tried putting it in download mode and use odin3 to restore it back to stock but odin3 would get stuck at the "nand write start" stage.
Click to expand...
Click to collapse
Contradictory. Is it in download mode or isn't it?
You did not say what was being flashed with Odin, either.
Phones do not boot into ODIN. You will have to provide more info so we can help.
Links to the ROM or software you used etc.
ok i shouldve explained this a little more clearly. when i power on the phone it says this...
ODIN MODE
PRODUCT NAME: SGH-T999
CUSTOM BINARY DOWNLOAD: Yes (10 COUNTS)
CURRENT BINARY: Custom
SYSTEM STATUS: Official
QUALCOMM SECUREBOOT: ENABLE
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
so i pulled the battery, put it in download mode (vol down + home + power) ran ODIN3, and tried to flash SGH-T999_TMB_T999UVALH2_T999TMBALH2_Original (which is a stock image) thats when it gets stuck at the NAND write start!!
I could be completely wrong but it appears you tried to install an incompatible rom.
are you talking about the SGH-T999_TMB_T999UVALH2_T999TMBALH2_Original file?
sushi829 said:
are you talking about the SGH-T999_TMB_T999UVALH2_T999TMBALH2_Original file?
Click to expand...
Click to collapse
Yes. I have not seen MBALH2 before regarding the tmo galaxy s3. I could be wrong. Hopefully someone more knowledgeable than me will chime in.
i also used this file too
T999UVDLJC_T999TMBDLJC_T999UVDLJC_HOME.tar
i downloaded the firmware from http://samsung-updates.com/device/?id=SGH-T999
sushi829 said:
i also used this file too
T999UVDLJC_T999TMBDLJC_T999UVDLJC_HOME.tar
i downloaded the firmware from http://samsung-updates.com/device/?id=SGH-T999
Click to expand...
Click to collapse
If I understand correctly you flashed that after the first one. I'm not a IT guy, but to the best of my understanding if you flash a ROM intended for another device you are going to have major issues. Sorry. I know my answers are not what you are looking for. I am trying to give you a heads up for your friends phone.
well i am trying to flash the correct firmware for his tmobile S3.
jcbofkc said:
If I understand correctly you flashed that after the first one. I'm not a IT guy, but to the best of my understanding if you flash a ROM intended for another device you are going to have major issues. Sorry. I know my answers are not what you are looking for. I am trying to give you a heads up for your friends phone.
Click to expand...
Click to collapse
He didn't flash the wrong file. Some other issue. Try a different data cable and USB port.
I was on the omni rom and decided to change my recovery when this happened.
It wouldnt boot past the samsung screen. I cannot get into recovery but I can get into download mode.
I know one possible fix is flashing the stock image through Odin but I cannot find the stock images. All the links are dead.
Anything will help.
Also if there is anybody willing to walk me through this real time, feel free to message me and we can chat on google hangouts.
krayzielilsmoki said:
Also if there is anybody willing to walk me through this real time, feel free to message me and we can chat on google hangouts.
Click to expand...
Click to collapse
What recovery are you using ?
Since you can get in to recovery, did you try restoring any of your previous backups ?
Are you already on 4,3 bootloader ?
You can download thr stock 4.3 firmware from here : http://www.sammobile.com/firmwares/1/?model=SGH-T889&pcode=0
You will need an account on sammobile though.
ciphercodes said:
What recovery are you using ?
Since you can get in to recovery, did you try restoring any of your previous backups ?
Are you already on 4,3 bootloader ?
You can download thr stock 4.3 firmware from here : http://www.sammobile.com/firmwares/1/?model=SGH-T889&pcode=0
You will need an account on sammobile though.
Click to expand...
Click to collapse
I tried the sammobile website but the downloaded files didnt work for me. I finally downloaded the T889UVALL4 factory image from this thread:
http://forum.xda-developers.com/showthread.php?t=2102380 but now im stuck in a bootloop. ill see if I can get into recovery now and if so Ill just flash twrp that I have on my sd card
still didnt want to go into recovery but I flashed CWM recovery through odin and I was able to go into it. Now ill flash the TWRP and see if I can flash my rom.
krayzielilsmoki said:
I tried the sammobile website but the downloaded files didnt work for me. I finally downloaded the T889UVALL4 factory image from this thread:
http://forum.xda-developers.com/showthread.php?t=2102380 but now im stuck in a bootloop. ill see if I can get into recovery now and if so Ill just flash twrp that I have on my sd card
Click to expand...
Click to collapse
How did you flash T889UVALL4 ?
Most likely your phone is on a newer(4.3) bootloader and flashing an older bootloader caused the boot loop.
I am very certain that flashing 4.3 stock image will resolve this problem.
ciphercodes said:
How did you flash T889UVALL4 ?
Most likely your phone is on a newer(4.3) bootloader and flashing an older bootloader caused the boot loop.
I am very certain that flashing 4.3 stock image will resolve this problem.
Click to expand...
Click to collapse
That might be it, since I was on 4.4.2 before. Do you know if there are better hosting sites for the download file because the ones on that site take 6 hours to download.
krayzielilsmoki said:
That might be it, since I was on 4.4.2 before. Do you know if there are better hosting sites for the download file because the ones on that site take 6 hours to download.
Click to expand...
Click to collapse
mluciano has uploaded the Stock Rooted ROM(Mr Robinsons) image on his dropbox, if you want stock rooted you can download it from here.
Not sure how fast this download would be.
https://www.dropbox.com/sh/lf54pmlxyrilzlx/xWF6hmlpAH
http://forum.xda-developers.com/showthread.php?p=49356729&highlight=dropbox#post49356729
ciphercodes said:
mluciano has uploaded the Stock Rooted ROM(Mr Robinsons) image on his dropbox, if you want stock rooted you can download it from here.
Not sure how fast this download would be.
https://www.dropbox.com/sh/lf54pmlxyrilzlx/xWF6hmlpAH
http://forum.xda-developers.com/showthread.php?p=49356729&highlight=dropbox#post49356729
Click to expand...
Click to collapse
Thank you so much! that rooted one worked perfect. My phone booted completely. And the file downloaded fairly quick.
krayzielilsmoki said:
Thank you so much! that rooted one worked perfect. My phone booted completely. And the file downloaded fairly quick.
Click to expand...
Click to collapse
Glad to know it worked.
Hi,
I just brick my i747 and after use debrick image of 4.4.2 my phone alive but problem is phone do not boot without sd card, someone suggest me to flash first I747UCUFNE4 4.4.2 bootloader file along with pit file , later install 4.4.2, so I dont have these fiels, really appreciate if someone help in this issue, thanks br
this will get you the UCUFNE4 bootloader and modem.
http://forum.xda-developers.com/showthread.php?t=2808654
sorry i dont have the pit file.
good luck, and remember that once you upgrade to KK ; you CANNOT downgrade or you will BRICK.
err on the side of kindness
This might help for the pit file: http://forum.xda-developers.com/showthread.php?t=1848264
thanks both of your, porblem solved
Im new to all of this, but I screwed up my phone flashing a stock image. Odin does see my phone but I get a error when i try to flash a pda file. ( I guess I get that error because im downgrading the software???) Anyway can someone point me in the right direction so i can download firmware where I do not get a error.
Also I am using odin 3.07
hunter99507 said:
Im new to all of this, but I screwed up my phone flashing a stock image. Odin does see my phone but I get a error when i try to flash a pda file. ( I guess I get that error because im downgrading the software???) Anyway can someone point me in the right direction so i can download firmware where I do not get a error.
Also I am using odin 3.07
Click to expand...
Click to collapse
post complete history of your phone
hunter99507 said:
Im new to all of this, but I screwed up my phone flashing a stock image. Odin does see my phone but I get a error when i try to flash a pda file. ( I guess I get that error because im downgrading the software???) Anyway can someone point me in the right direction so i can download firmware where I do not get a error.
Also I am using odin 3.07
Click to expand...
Click to collapse
What bootloader is on your phone? If you don't know, boot into download mode and look for a reference to warranty bit. If you see something about warranty bit, that means you have at least a 4.3 bootloader and you can't flash a stock ROM unless the ROM was compiled for flashing in Odin.
If you have at least the 4.3 bootloader, I suggest flashing Philz Touch custom recovery via Odin. Copy a CM10.2 or early CM11 ROM onto an external SD card, boot into recovery, and flash the ROM. This will at least get you phone running to determine exactly which bootloader and baseband are on your phone.
I'm not sure what bootloader I was on, I think it was mjb software . I assume I was on the latest and I tried to flash a previous version and now my phone is hard bricked. I bought a jig on eBay and it should come early this week. I guess what my next question is, is if I can get into download mode using the jig, what software would I need to flash using Odin 3.09.
Sorry I'm kinda new to Odin and the gs3 flashinng so I'm not familiar with it (I also have a nexus 5 so I'm used to using fastboot). Could someone post what files I need to get my gs3 back in order assuming I can get into download mode?
Thank you for all of your help, it sucks having a bricked phone and not really knowing how to fix it.
Does your phone turn on at all? If not, a jig probably won't help.
It does but doesnt turn on. When i hold the power button nothing happens and it does not vibrate. But when i plug it into the computer the usb sound goes off and the red led comes on (Charging phone LED). Do you think a jig will help?
When you connect the phone, what does it say in device manager? Of it says something like qusb load, it may be hard bricked.
audit13 said:
When you connect the phone, what does it say in device manager? Of it says something like qusb load, it may be hard bricked.
Click to expand...
Click to collapse
When i plug it into the computer it shows up as "Qualcomm HS-USB QDLoader 9008 (COM7)"
Does that mean im screwed? Is there anything I can do?
Since the phone will not go into download or recovery, you may have to have it jtagged. Before doing that, did you try to de-brick it?
This may help too: http://forum.xda-developers.com/showthread.php?t=2549068
Here is the PIT for Android Version 4.4.2
nsnobel2 said:
Hi,
I just brick my i747 and after use debrick image of 4.4.2 my phone alive but problem is phone do not boot without sd card, someone suggest me to flash first I747UCUFNE4 4.4.2 bootloader file along with pit file , later install 4.4.2, so I dont have these fiels, really appreciate if someone help in this issue, thanks br
Click to expand...
Click to collapse
4shared.com PIT_16GB_I747UCUFNE4_ATT_Andro id_4_4_2
What d'you mean?
01manu said:
4shared.com PIT_16GB_I747UCUFNE4_ATT_Andro id_4_4_2
Click to expand...
Click to collapse
D'you mean to search 4shared.com for "PIT_16GB_I747UCUFNE4_ATT_Android_4_4_2"?
pit samsung att android 4.4.2
LeDroidDummy said:
D'you mean to search 4shared.com for "PIT_16GB_I747UCUFNE4_ATT_Android_4_4_2"?
Click to expand...
Click to collapse
yes and writeme to [email protected] for the passwd o for the file and passwd
Thanks but...
01manu said:
yes and writeme to [email protected] for the passwd o for the file and passwd
Click to expand...
Click to collapse
Thanks 01manu, but when I search for that, there's a lot of results. Which one is it? (4shared{dot}com /web/q/#query=PIT_16GB_I747UCUFNE4_ATT_Android_4_4_2)
Here, try this.
https://forum.xda-developers.com/showthread.php?t=1848264
That should be the PIT file you need.
Hi
I managed to brick my T800. I have twrp but I can't get into recovery mode. I can get into down load mode, though. So I'm trying to flash a rom with Odin but down load from sammobile is taking forever. I'm afraid the logo will burn in. (I can't turn it off either, it wants to reboot)
Is there done place else where I can get a rom I can flash with Odin?
Thanks
barth2 said:
Hi
I managed to brick my T800. I have twrp but I can't get into recovery mode. I can get into down load mode, though. So I'm trying to flash a rom with Odin but down load from sammobile is taking forever. I'm afraid the logo will burn in. (I can't turn it off either, it wants to reboot)
Is there done place else where I can get a rom I can flash with Odin?
Thanks
Click to expand...
Click to collapse
Found it here in the Android Development forum
http://forum.xda-developers.com/showthread.php?t=2800372
Thank you. Back in business
barth2 said:
Thank you. Back in business
Click to expand...
Click to collapse
Good to hear
kevman8396 said:
Found it here in the Android Development forum
http://forum.xda-developers.com/showthread.php?t=2800372
Click to expand...
Click to collapse
Thanks for your help in the location of the firmware, just bricked my Tab and currently working to restore all.
Here's my thread if you guys need a fast server. The firmwares in my thread come straight from sammobile and uploaded to mega. http://forum.xda-developers.com/showthread.php?t=2934279
Hello, I used to be rooted with custom ROMs ect but went back to stock I317ATTALJ2 so I can give the phone to my daughter. Well everything went smooth until an update from AT&T came through and she ran it when the battery was at 21% but I'm not sure it that matter but didn't help in matters... Anyhow it ran the upgrade and on reboot it stayed on the Galaxy Note II screen and wont do anything but sit there. I let it sit for a long time before pulling the battery and booting but it goes to same screen and same thing. I can not get into recovery (Volume Up, Home, Pwr) but I can go into download mode. With the battery being so low I read that it charges while in download mode so for the remainder of the day I put the phone in download mode and plugged into charger.
Suggestions?
After you get it charged up some and you're in download mode. Just Odin back to stock Att firmware should fix the problem hopefully...
You can find the stock firmware here>> http://bit.ly/1HNVFVJ
Guess the phone didn't like that update ?.
Bajanman said:
After you get it charged up some and you're in download mode. Just Odin back to stock Att firmware should fix the problem hopefully...
You can find the stock firmware here>> http://bit.ly/1HNVFVJ
Guess the phone didn't like that update .
Click to expand...
Click to collapse
Ok, Ill give the stock firmware (At&t Firmware I317UCALJ2 Uploaded By-Bajanman) that Bajanman supplys ill let you guys know in an hour or two its downloading now. I did try re installing the stock firmware I had that worked the first time and it was from SamMobile and it too sent me to the Galaxy Note II screen and froze so its not looking good.....
Thanks!
Oxicottin said:
Ok, Ill give the stock firmware (At&t Firmware I317UCALJ2 Uploaded By-Bajanman) that Bajanman supplys ill let you guys know in an hour or two its downloading now. I did try re installing the stock firmware I had that worked the first time and it was from SamMobile and it too sent me to the Galaxy Note II screen and froze so its not looking good.....
Thanks!
Click to expand...
Click to collapse
Ok.
Hopefully everything works out next time around.
Another thing you could try is flashing which ever recovery you previously had installed. Last time I was having issues with something similar, after re flashing my recovery everything started working again. Just just a thought that might work.
I'm monitoring this thread too see what happens ok.
Bajanman said:
Ok.
Hopefully everything works out next time around.
Another thing you could try is flashing which ever recovery you previously had installed. Last time I was having issues with something similar, after re flashing my recovery everything started working again. Just just a thought that might work.
I'm monitoring this thread too see what happens ok.
Click to expand...
Click to collapse
Recovery? can I flash the stock recovery using ODIN? If so where do I get it.... I always have used TWRP I wanted to use custom ROMs never really experimented with anything else.
Oxicottin said:
Recovery? can I flash the stock recovery using ODIN? If so where do I get it.... I always have used TWRP I wanted to use custom ROMs never really experimented with anything else.
Click to expand...
Click to collapse
Yes you can flash a custom recovery from Odin. You just have to use the (Twrp) tar file found here>>>
http://bit.ly/1y0Tyg7
Find your device model and download the tar. And make sure you're downloading the correct file for your device ok!
I to use Twrp and luv it.?
OK, well its not looking good....
1) Flashed the stock firmware suggested...... Still get same results!
2) Flashed TWRP through ODIN and it made it to the same screen and froze. Did a battery pull and button combo and it wont go into recovery.
Is there a application that will force your phone into recovery and download modes? I remember back when I messed with the captivate there was a application someone built that did such a thing.
Any suggestions?
Oxicottin said:
OK, well its not looking good....
1) Flashed the stock firmware suggested...... Still get same results!
2) Flashed TWRP through ODIN and it made it to the same screen and froze. Did a battery pull and button combo and it wont go into recovery.
Is there a application that will force your phone into recovery and download modes? I remember back when I messed with the captivate there was a application someone built that did such a thing.
Any suggestions?
Click to expand...
Click to collapse
Not sure you were on the newer 4.4.2 bootloader or not. If it was on a newer bootloader then you won't be able to downgrade.. This might help you get the phone working again since you just flashed the original firmware.
Go to this thread here>>http://forum.xda-developers.com/showthread.php?t=2502464.
Download
4.3 Param.bin and Tz.img
http://d-h.st/OYC
Step 2 (no bootloader in here)
flash this to bring wifi back
but keep your knox free 4.1.2 bootloader.
Allowing you to freely flash between 4.1.2 roms and the latest 4.3 leak
Without having to one click,Keeping Wifi Throughout and removing Knox
Click to expand...
Click to collapse
Unzip, Boot into Download mode, Open ODIN, put tar file in PDS slot, click Start.
Then you can go here for the latest stock Att firmware. If the above steps don't help you, then you could try flashing one one the rooted stock packages from this thread.
Bajanman said:
Not sure you were on the newer 4.4.2 bootloader or not. If it was on a newer bootloader then you won't be able to downgrade.. This might help you get the phone working again since you just flashed the original firmware.
Go to this thread here>>http://forum.xda-developers.com/showthread.php?t=2502464.
Download
4.3 Param.bin and Tz.img
http://d-h.st/OYC
Unzip, Boot into Download mode, Open ODIN, put tar file in PDS slot, click Start.
Then you can go here for the latest stock Att firmware. If the above steps don't help you, then you could try flashing one one the rooted stock packages from this thread.
Click to expand...
Click to collapse
Ok that worked and it booted!!!! Now im on 4.1.1 with TWRP
Not really sure what I just did? Did I downgrade my bootloader? Also, now how do I get it to the most up to date version without this again?
I downloaded an app and it says im on.....
Bootloader Version: 1317UCUBMK6
Thanks!
Oxicottin said:
Ok that worked and it booted!!!! Now im on 4.1.1 with TWRP
Not really sure what I just did? Did I downgrade my bootloader? Also, now how do I get it to the most up to date version without this again?
Thanks!
Click to expand...
Click to collapse
Ok not is back working again, which is great news ?. Go to the link I posted for the stock firmware, and use the rooted one.
But first make a backup of your working system first ok.
Bajanman said:
Ok not is back working again, which is great news . Go to the link I posted for the stock firmware, and use the rooted one.
But first make a backup of your working system first ok.
Click to expand...
Click to collapse
Ok, Im On 4.3 now and its working great.... Thank You!
Oxicottin said:
Ok, Im On 4.3 now and its working great.... Thank You!
Click to expand...
Click to collapse
You're very welcome glad I could help fix it.
Have a good day...
Ok problem solved so unsubscribing from this thread. If you run into any other problems you can always hit me up thru pm ?.