my friend tried to root his T999 but messed up on a step im guessing so now his phone will boot straight to odin mode. i tried putting it in download mode and use odin3 to restore it back to stock but odin3 would get stuck at the "nand write start" stage. his phone says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." when it is powered up. does anybody know how to fix this issue?? any help would be great! i googled everything that i could think of and tried everything that was suggested but nothing works! thanks in advance!!
sushi829 said:
my friend tried to root his T999 but messed up on a step im guessing so now his phone will boot straight to odin mode. i tried putting it in download mode and use odin3 to restore it back to stock but odin3 would get stuck at the "nand write start" stage.
Click to expand...
Click to collapse
Contradictory. Is it in download mode or isn't it?
You did not say what was being flashed with Odin, either.
Phones do not boot into ODIN. You will have to provide more info so we can help.
Links to the ROM or software you used etc.
ok i shouldve explained this a little more clearly. when i power on the phone it says this...
ODIN MODE
PRODUCT NAME: SGH-T999
CUSTOM BINARY DOWNLOAD: Yes (10 COUNTS)
CURRENT BINARY: Custom
SYSTEM STATUS: Official
QUALCOMM SECUREBOOT: ENABLE
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
so i pulled the battery, put it in download mode (vol down + home + power) ran ODIN3, and tried to flash SGH-T999_TMB_T999UVALH2_T999TMBALH2_Original (which is a stock image) thats when it gets stuck at the NAND write start!!
I could be completely wrong but it appears you tried to install an incompatible rom.
are you talking about the SGH-T999_TMB_T999UVALH2_T999TMBALH2_Original file?
sushi829 said:
are you talking about the SGH-T999_TMB_T999UVALH2_T999TMBALH2_Original file?
Click to expand...
Click to collapse
Yes. I have not seen MBALH2 before regarding the tmo galaxy s3. I could be wrong. Hopefully someone more knowledgeable than me will chime in.
i also used this file too
T999UVDLJC_T999TMBDLJC_T999UVDLJC_HOME.tar
i downloaded the firmware from http://samsung-updates.com/device/?id=SGH-T999
sushi829 said:
i also used this file too
T999UVDLJC_T999TMBDLJC_T999UVDLJC_HOME.tar
i downloaded the firmware from http://samsung-updates.com/device/?id=SGH-T999
Click to expand...
Click to collapse
If I understand correctly you flashed that after the first one. I'm not a IT guy, but to the best of my understanding if you flash a ROM intended for another device you are going to have major issues. Sorry. I know my answers are not what you are looking for. I am trying to give you a heads up for your friends phone.
well i am trying to flash the correct firmware for his tmobile S3.
jcbofkc said:
If I understand correctly you flashed that after the first one. I'm not a IT guy, but to the best of my understanding if you flash a ROM intended for another device you are going to have major issues. Sorry. I know my answers are not what you are looking for. I am trying to give you a heads up for your friends phone.
Click to expand...
Click to collapse
He didn't flash the wrong file. Some other issue. Try a different data cable and USB port.
Related
Well, I sure hope I didn't jack up my new phone for good.
I was using odin to get OUDHS CWM-Based Recovery 1.0.3.3 working.
I booted the phone into download mode, then connected and waited for my phone to be recognized. I selected the correct tar and hit start.
It failed on the first write section, and I couldn't get it to continue so i turned my phone off and tried to boot into download mode again. Now no matter what I do it gives me the "firmware upgrade failed" message and tells me to connect to Kies, but Kies will not detect my device.
Any ideas?
For reference I was following http://forum.xda-developers.com/showthread.php?t=2260031 to the letter.
I will continue to work on this for awhile.
belisknerprime said:
Well, I sure hope I didn't jack up my new phone for good.
I was using odin to get OUDHS CWM-Based Recovery 1.0.3.3 working.
I booted the phone into download mode, then connected and waited for my phone to be recognized. I selected the correct tar and hit start.
It failed on the first write section, and I couldn't get it to continue so i turned my phone off and tried to boot into download mode again. Now no matter what I do it gives me the "firmware upgrade failed" message and tells me to connect to Kies, but Kies will not detect my device.
Any ideas?
For reference I was following http://forum.xda-developers.com/showthread.php?t=2260031 to the letter.
I will continue to work on this for awhile.
Click to expand...
Click to collapse
If you can still get into download mode try using odin to flash a complete firmware made for your specific device and obtained from sammobile.com
Sent from my GT-P7510 using xda app-developers app
re: Odin flash
belisknerprime said:
Well, I sure hope I didn't jack up my new phone for good.
I was using odin to get OUDHS CWM-Based Recovery 1.0.3.3 working.
I booted the phone into download mode, then connected and waited for my phone to be recognized. I selected the correct tar and hit start.
It failed on the first write section, and I couldn't get it to continue so i turned my phone off and tried to boot into download mode again. Now no matter what I do it gives me the "firmware upgrade failed" message and tells me to connect to Kies, but Kies will not detect my device.
Any ideas?
For reference I was following http://forum.xda-developers.com/showthread.php?t=2260031 to the letter.
I will continue to work on this for awhile.
Click to expand...
Click to collapse
If I were you I would forget about KIES and uninstall it along with any other samsung applications and drivers
you have on your computer, then reboot your computer and download only the Samsung USB Drivers.
Once you have the latest samsung usb drivers install it and restart your computer.
That way you will have a clean start, and if the screen of your phone displays
anything at all, especially if it displays something about kies then that proves that
your phone will go into download mode if it's done properly.
Press the volume down, home and the power button at the same time until the phone vibrates
and then let go of the power button first before letting go of the other two buttons.
Before you do any of this, you need to download the stock Samsung Jellybean
v4.2.2 M919 MDL Touchwiz Odin flash firmware.
Here is the link to download it: http://k0nane.info/rom/M919UVUAMDL_M919TMBAMDL_TMB.zip
Here is the latest Samsung USB Drivers download: http://downloadcenter.samsung.com/c...ng_USB_Driver_for_Mobile_Phones_v1.5.14.0.exe
Well did finally get Kies to pick up the phone but it just gets stuck on connecting. How is anyone supposed to do a firmware recovery if the phone cant be connected to?
I will try what you said and uninstall and only install the usb drivers.
And to answer your question I can't get into download mode, it just skips right to the Firmware upgrade error.
Although in the top left of the screen I see this:
ODIN MODE
Product Name: SGH-M919
Current Binary: Custom
System Status: Official
CSB-OEM_CONFIG_LSB: 0x30
Write Protection: Enable
Does that mean anything?
belisknerprime said:
Well did finally get Kies to pick up the phone but it just gets stuck on connecting. How is anyone supposed to do a firmware recovery if the phone cant be connected to?
I will try what you said and uninstall and only install the usb drivers.
And to answer your question I can't get into download mode, it just skips right to the Firmware upgrade error.
Although in the top left of the screen I see this:
ODIN MODE
Product Name: SGH-M919
Current Binary: Custom
System Status: Official
CSB-OEM_CONFIG_LSB: 0x30
Write Protection: Enable
Does that mean anything?
Click to expand...
Click to collapse
Then do it the old fashion way, pull the battery out of the phone
and while pressing the volume down/home/power buttons put
the battery back in and see if that gets it into download mode.
(I hope your phone is a Tmobile M919 and not the international version or a variant like the M919V).
Misterjunky said:
Then do it the old fashion way, pull the battery out of the phone
and while pressing the volume down/home/power buttons put
the battery back in and see if that gets it into download mode.
(I hope your phone is a Tmobile M919 and not the international version or a variant like the M919V).
Click to expand...
Click to collapse
Yes, it's is the T-Mobile version. It has the case branding and everything. I got it straight from them.
Ah, that did it! I'm now back in download mode. Thank you.
I'm downloading the stock firmware, it will take about an hour. Should I attempt to flash the OUDHS recovery again, or wait and just flash the stock JB firmware?
re: stock jb
belisknerprime said:
Yes, it's is the T-Mobile version. It has the case branding and everything. I got it straight from them.
Ah, that did it! I'm now back in download mode. Thank you.
I'm downloading the stock firmware, it will take about an hour. Should I attempt to flash the OUDHS recovery again, or wait and just flash the stock JB firmware?
Click to expand...
Click to collapse
You are downloading the STOCK JB firmware now....
After your phone is up and running reboot into download mode and you will need to Odin flash the OUDHS recovery TAR file: http://d-h.st/jTk
Once that's flashed you will need to go into OUDHS recovery and flash this superuser.zip file: http://www.shabbypenguin.com/Android/Scripts/Nexus-Files/Root/Superuser-1.0.1.1.zip
After flashing the superuser.zip reboot the phone.
Just to play it safe, after you reboot the phone reboot it again in recovery and flash this:http://batakang.com/ftp/SGH-M919/ROOT_M919UVUAMDL.zip
This will setup your kernel to be 100% un-restricted so there will be no chance that you will loose root access.
NOTE: If you want to keep your phone STOCK then after odin flashing the JB stock firmware don't do anything else.
Good luck!
Thank you for the help. One question though, Do i continue to use the PDA button on odin for the JB flash like I was instructed for the other thing or do I use the phone button?
FWIW home button is not needed on the S4 to enter recovery or download mode. I love it Just hold down one of the volume buttons as its booting and voila
belisknerprime said:
Thank you for the help. One question though, Do i continue to use the PDA button on odin for the JB flash like I was instructed for the other thing or do I use the phone button?
Click to expand...
Click to collapse
Use the PDA button. I *believe* the phone button is only for flashing modem files.
belisknerprime said:
Thank you for the help. One question though, Do i continue to use the PDA button on odin for the JB flash like I was instructed for the other thing or do I use the phone button?
Click to expand...
Click to collapse
Yes. only use the PDA button
I'm trying to goto stock firmware MDL. Downloaded the right 1.7G file and the 3.07 version of odin.
Put the S4 in download mode,but I see auth fail once the ODIN process starts.
I'm reading this thread:
http://forum.xda-developers.com/showthread.php?t=2483380
Do I need to do the PIT step as well ? ( If yes, where do I find the stock pit files for the S4 US Tmobile?
I grabbed the SGH-M919-TMB-M919UVUAMDL-1366964131*.md5 to use in odin->pda section
My phone is still bricked. Pls help
didadi said:
I'm trying to goto stock firmware MDL. Downloaded the right 1.7G file and the 3.07 version of odin.
Put the S4 in download mode,but I see auth fail once the ODIN process starts.
I'm reading this thread:
http://forum.xda-developers.com/showthread.php?t=2483380
Do I need to do the PIT step as well ? ( If yes, where do I find the stock pit files for the S4 US Tmobile?
I grabbed the SGH-M919-TMB-M919UVUAMDL-1366964131*.md5 to use in odin->pda section
My phone is still bricked. Pls help
Click to expand...
Click to collapse
Make sure your cable is good and try different USB port on pc.
Also which firmware are you on?
☞ Sent from here☜???
I've used 2 cables already and different USB. . I think the pit file is what I may have to check agian,as this seems debugging ODIN failures. Can somebody post me S4, Tmo 16GB stock pit file?
I'm on MK2 firmware. I'm trying to go back to stock firmware/4.2.2.
The exact err I'm getting is:
---
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1).
---
What is the way out here? Have I totally bricked my phone? xda or elsewhere not showing a workable solution yet. (Still searching)
I have a samsung galaxy s3 (3 mobile UK).. that is rooted and CWM installed
it was working just fine when it suddenly stuck while running, i pulled out battery and reinserted.... then it started restarting at 3 mobile logo screen but after a while it started to restart just after showing samsung logo..... at first it was going to cwm recovery but now it dont .... i am running icecream sandwich ....
i tried to update it to jelly beans using odin 3.07 with firmware XXEMD2...but NAND failed .... chanding port, restarting computer tried with no success
STUCK .... help..>!!!!!!
aadil.m said:
I have a samsung galaxy s3 (3 mobile UK).. that is rooted and CWM installed
it was working just fine when it suddenly stuck while running, i pulled out battery and reinserted.... then it started restarting at 3 mobile logo screen but after a while it started to restart just after showing samsung logo..... at first it was going to cwm recovery but now it dont .... i am running icecream sandwich ....
i tried to update it to jelly beans using odin 3.07 with firmware XXEMD2...but NAND failed .... chanding port, restarting computer tried with no success
STUCK .... help..>!!!!!!
Click to expand...
Click to collapse
Can the phone still boot into Download mode?
yup
altrikdout21 said:
Can the phone still boot into Download mode?
Click to expand...
Click to collapse
yes.... thats the only thing that my fone goes to
aadil.m said:
yes.... thats the only thing that my fone goes to
Click to expand...
Click to collapse
Download the appropriate zip for your carrier from this link http://forum.xda-developers.com/showthread.php?t=1739426 and then flash with odin. Keep in mind the person that hosted these hosted them on a website with incredibly slow download times. It often cuts out on you too, so make sure at the end of the download the file size is right. You may have gotten a bad download earlier.
If I have helped, slap that thanks button
aeppacher said:
Download the appropriate zip for your carrier from this link http://forum.xda-developers.com/showthread.php?t=1739426 and then flash with odin. Keep in mind the person that hosted these hosted them on a website with incredibly slow download times. It often cuts out on you too, so make sure at the end of the download the file size is right. You may have gotten a bad download earlier.
If I have helped, slap that thanks button
Click to expand...
Click to collapse
but but the link you provided is to root my device ..... and it does not include 3 mobile company
not to flash :-s
Save the phone
aadil.m said:
but but the link you provided is to root my device ..... and it does not include 3 mobile company
not to flash :-s
Click to expand...
Click to collapse
Hi , please go to the sammobile site and choose your exact firm.
Download it and extract it,
Use odin to flash it.
aadil.m said:
but but the link you provided is to root my device ..... and it does not include 3 mobile company
not to flash :-s
Click to expand...
Click to collapse
sorry assumed you wanted root. Just go to sammobile and download a firmware http://www.sammobile.com/firmwares/1/ just put in your phone's info.
Slap that thanks button if I helped
aeppacher said:
sorry assumed you wanted root. Just go to sammobile and download a firmware
Slap that thanks button if I helped
Click to expand...
Click to collapse
it dint work
NAND failed in odin
thaanks for ur help
aadil.m said:
it dint work
NAND failed in odin
thaanks for ur help
Click to expand...
Click to collapse
I would recommend installing kies from samsung and trying to flash the firmware with them. That should fix it no matter what and make sure that you do have the right drivers installed. Also make sure you have the right version of odin running. Here is download link for kies on PC (I assume you have PC) http://downloadcenter.samsung.com/content/SW/201306/20130612104232657/KiesSetup.exe just install, plug your phone in and hopefully it recognizes it. Even if it doesn't, it might install some drivers that make odin work. Let me know if it fixes it
aeppacher said:
I would recommend installing kies from samsung and trying to flash the firmware with them. That should fix it no matter what and make sure that you do have the right drivers installed. Also make sure you have the right version of odin running. Here is download link for kies on PC (I assume you have PC) just install, plug your phone in and hopefully it recognizes it. Even if it doesn't, it might install some drivers that make odin work. Let me know if it fixes it
Click to expand...
Click to collapse
samsung kies dont detect the device... its says device not responding, reboot ur device
odine says same thing ... NAND failed....
went to software specialist shop locally.... even he cannot fix the device
whats wroooooooooooooooong!!!
should i go for re-partition my device with PIT file??
Hhhhheeeeeeeeeeeeeeellllllllllllllpppppppppppppppp!!!
tried to repatition with PIT but failed it says
"there is no pit partition"
aadil.m said:
samsung kies dont detect the device... its says device not responding, reboot ur device
odine says same thing ... NAND failed....
went to software specialist shop locally.... even he cannot fix the device
whats wroooooooooooooooong!!!
should i go for re-partition my device with PIT file??
Click to expand...
Click to collapse
similar issue, last post on first page might help http://forum.xda-developers.com/showthread.php?t=1846867
i tried to upgrade my s3 i accidentally falshed with correpted file('i renamed the file .mb5 to .tar) it stuck and showing that needed to connect kies
.. and kies not detecting my device and it wont boot into recovery mode but after search i rooted again through cf auto root and then it can enter into recovery mode is it bricked/not what happend to my device currently it can enter into both recovery &download mode ......
pls help me with this
ghjsdf9 said:
i tried to upgrade my s3 i accidentally falshed with correpted file('i renamed the file .mb5 to .tar) it stuck and showing that needed to connect kies
.. and kies not detecting my device and it wont boot into recovery mode but after search i rooted again through cf auto root and then it can enter into recovery mode is it bricked/not what happend to my device currently it can enter into both recovery &download mode ......
pls help me with this
Click to expand...
Click to collapse
Welcome to the forum! Your phone's hardly bricked if you can get to download and recovery modes. Flashing the correct (stock) firmware should get you back to working conditions. What Android version were you on prior to it being stuck and what were you trying to upgrade to?
Larry2999 said:
Welcome to the forum! Your phone's hardly bricked if you can get to download and recovery modes. Flashing the correct (stock) firmware should get you back to working conditions. What Android version were you on prior to it being stuck and what were you trying to upgrade to?
Click to expand...
Click to collapse
THANKS FOR WELCOME PARTY:
and for the rly tooo.
i can get into both download mode as well as recovery mode ..... i'm not clear with my phones model-in odin mode it showing "PRODUCT NAME:-SGH-I747M" on starting it is running 4.1.2 (zsemc1) version i am not clear with baseband etc.
and i'm not clear with supported varient versions when i flashed with different version in odin mode it showing differnt causes for different version
ex: "unsupported dev type","secure check fail sb12",securechech fail aboot" for three different versions
ghjsdf9 said:
THANKS FOR WELCOME PARTY:
and for the rly tooo.
i can get into both download mode as well as recovery mode ..... i'm not clear with my phones model-in odin mode it showing "PRODUCT NAME:-SGH-I747M" on starting it is running 4.1.2 (zsemc1) version i am not clear with baseband etc.
and i'm not clear with supported varient versions when i flashed with different version in odin mode it showing differnt causes for different version
ex: "unsupported dev type","secure check fail sb12",securechech fail aboot" for three different versions
Click to expand...
Click to collapse
i747M is for the Canadian and Mexican variants. If you were on stock 4.1.2, you should be able to Odin back to stock 4.1.1 or upgrade to 4.3 via custom recovery. You can go to the thread below to check the correct stock image for your phone based on carrier. Make sure you use the correct image as flashing the wrong version could hard brick your phone. Download to your PC and then flash. If you select the 4.3 version, you would need to flash custom recovery to your phone via Odin, save the file to a (micro) SD card and then flash via custom recovery.
http://forum.xda-developers.com/showthread.php?t=1739426
Let me know if this works for you.
Larry2999 said:
i747M is for the Canadian and Mexican variants. If you were on stock 4.1.2, you should be able to Odin back to stock 4.1.1 or upgrade to 4.3 via custom recovery. You can go to the thread below to check the correct stock image for your phone based on carrier. Make sure you use the correct image as flashing the wrong version could hard brick your phone. Download to your PC and then flash. If you select the 4.3 version, you would need to flash custom recovery to your phone via Odin, save the file to a (micro) SD card and then flash via custom recovery.
http://forum.xda-developers.com/showthread.php?t=1739426
Let me know if this works for you.
Click to expand...
Click to collapse
i'm Asian it worked for local networks before bricked so i'm not clear with choosing in versions... ["help me with it"]
ghjsdf9 said:
i'm Asian it worked for local networks before bricked so i'm not clear with choosing in versions... ["help me with it"]
Click to expand...
Click to collapse
If we are going to flash a stock ROM, we would need to flash the correct version as there is risk of a worse brick if we flash the wrong one. When the phone was working normally, the old network would probably be showing during booting. If you got it from abroad, please check if you can get the information from the previous owner. If there is no way of telling the correct firmware, then you can flash custom recovery to the phone and try flashing a custom ROM via recovery. It's always tidier flashing a custom ROM to a device functioning normally but, unless we can be sure of the correct stock firmware to flash, your options may be limited.
Larry2999 said:
If we are going to flash a stock ROM, we would need to flash the correct version as there is risk of a worse brick if we flash the wrong one. When the phone was working normally, the old network would probably be showing during booting. If you got it from abroad, please check if you can get the information from the previous owner. If there is no way of telling the correct firmware, then you can flash custom recovery to the phone and try flashing a custom ROM via recovery. It's always tidier flashing a custom ROM to a device functioning normally but, unless we can be sure of the correct stock firmware to flash, your options may be limited.
Click to expand...
Click to collapse
and finally i found the correct version and when tried to flash through odin i came across this problem
it stuck at "initialization..." [more than hour..] help pls......
ghjsdf9 said:
and finally i found the correct version and when tried to flash through odin i came across this problem
it stuck at "initialization..." [more than hour..] help pls......
Click to expand...
Click to collapse
Sounds like a partition problem. Please let me know the firmware version you are trying to flash.
Larry2999 said:
Sounds like a partition problem. Please let me know the firmware version you are trying to flash.
Click to expand...
Click to collapse
it's version 4.3(I747MVLUEND2_I747MOYBEND2_SPC) at sammobiles.com............
and once "i tried with pit file by marking re partition" will this effect ??????????????
ghjsdf9 said:
it's version 4.3(I747MVLUEND2_I747MOYBEND2_SPC) at sammobiles.com............
and once "i tried with pit file by marking re partition" will this effect ??????????????
Click to expand...
Click to collapse
I've seen this particular problem reported several times and it's always been a problem with the pit file. Flashing a complete stock system should fix all partition problems though. If the stock file you are using is an Odin flashable file, you may try using Odin 3.09. Otherwise, I'd suggest you find a recovery flashable image and flash via (custom) recovery.
Hi,
I just brick my i747 and after use debrick image of 4.4.2 my phone alive but problem is phone do not boot without sd card, someone suggest me to flash first I747UCUFNE4 4.4.2 bootloader file along with pit file , later install 4.4.2, so I dont have these fiels, really appreciate if someone help in this issue, thanks br
this will get you the UCUFNE4 bootloader and modem.
http://forum.xda-developers.com/showthread.php?t=2808654
sorry i dont have the pit file.
good luck, and remember that once you upgrade to KK ; you CANNOT downgrade or you will BRICK.
err on the side of kindness
This might help for the pit file: http://forum.xda-developers.com/showthread.php?t=1848264
thanks both of your, porblem solved
Im new to all of this, but I screwed up my phone flashing a stock image. Odin does see my phone but I get a error when i try to flash a pda file. ( I guess I get that error because im downgrading the software???) Anyway can someone point me in the right direction so i can download firmware where I do not get a error.
Also I am using odin 3.07
hunter99507 said:
Im new to all of this, but I screwed up my phone flashing a stock image. Odin does see my phone but I get a error when i try to flash a pda file. ( I guess I get that error because im downgrading the software???) Anyway can someone point me in the right direction so i can download firmware where I do not get a error.
Also I am using odin 3.07
Click to expand...
Click to collapse
post complete history of your phone
hunter99507 said:
Im new to all of this, but I screwed up my phone flashing a stock image. Odin does see my phone but I get a error when i try to flash a pda file. ( I guess I get that error because im downgrading the software???) Anyway can someone point me in the right direction so i can download firmware where I do not get a error.
Also I am using odin 3.07
Click to expand...
Click to collapse
What bootloader is on your phone? If you don't know, boot into download mode and look for a reference to warranty bit. If you see something about warranty bit, that means you have at least a 4.3 bootloader and you can't flash a stock ROM unless the ROM was compiled for flashing in Odin.
If you have at least the 4.3 bootloader, I suggest flashing Philz Touch custom recovery via Odin. Copy a CM10.2 or early CM11 ROM onto an external SD card, boot into recovery, and flash the ROM. This will at least get you phone running to determine exactly which bootloader and baseband are on your phone.
I'm not sure what bootloader I was on, I think it was mjb software . I assume I was on the latest and I tried to flash a previous version and now my phone is hard bricked. I bought a jig on eBay and it should come early this week. I guess what my next question is, is if I can get into download mode using the jig, what software would I need to flash using Odin 3.09.
Sorry I'm kinda new to Odin and the gs3 flashinng so I'm not familiar with it (I also have a nexus 5 so I'm used to using fastboot). Could someone post what files I need to get my gs3 back in order assuming I can get into download mode?
Thank you for all of your help, it sucks having a bricked phone and not really knowing how to fix it.
Does your phone turn on at all? If not, a jig probably won't help.
It does but doesnt turn on. When i hold the power button nothing happens and it does not vibrate. But when i plug it into the computer the usb sound goes off and the red led comes on (Charging phone LED). Do you think a jig will help?
When you connect the phone, what does it say in device manager? Of it says something like qusb load, it may be hard bricked.
audit13 said:
When you connect the phone, what does it say in device manager? Of it says something like qusb load, it may be hard bricked.
Click to expand...
Click to collapse
When i plug it into the computer it shows up as "Qualcomm HS-USB QDLoader 9008 (COM7)"
Does that mean im screwed? Is there anything I can do?
Since the phone will not go into download or recovery, you may have to have it jtagged. Before doing that, did you try to de-brick it?
This may help too: http://forum.xda-developers.com/showthread.php?t=2549068
Here is the PIT for Android Version 4.4.2
nsnobel2 said:
Hi,
I just brick my i747 and after use debrick image of 4.4.2 my phone alive but problem is phone do not boot without sd card, someone suggest me to flash first I747UCUFNE4 4.4.2 bootloader file along with pit file , later install 4.4.2, so I dont have these fiels, really appreciate if someone help in this issue, thanks br
Click to expand...
Click to collapse
4shared.com PIT_16GB_I747UCUFNE4_ATT_Andro id_4_4_2
What d'you mean?
01manu said:
4shared.com PIT_16GB_I747UCUFNE4_ATT_Andro id_4_4_2
Click to expand...
Click to collapse
D'you mean to search 4shared.com for "PIT_16GB_I747UCUFNE4_ATT_Android_4_4_2"?
pit samsung att android 4.4.2
LeDroidDummy said:
D'you mean to search 4shared.com for "PIT_16GB_I747UCUFNE4_ATT_Android_4_4_2"?
Click to expand...
Click to collapse
yes and writeme to [email protected] for the passwd o for the file and passwd
Thanks but...
01manu said:
yes and writeme to [email protected] for the passwd o for the file and passwd
Click to expand...
Click to collapse
Thanks 01manu, but when I search for that, there's a lot of results. Which one is it? (4shared{dot}com /web/q/#query=PIT_16GB_I747UCUFNE4_ATT_Android_4_4_2)
Here, try this.
https://forum.xda-developers.com/showthread.php?t=1848264
That should be the PIT file you need.
guys please help as i was rooting my phone everything went fine then all of sudden bam froze so i took battery out to restart and was stuck on logo i can upload any specs u like
Just download the latest stock rom from sammobile.com and flash it via Odin.
audit13 said:
Just download the latest stock rom from sammobile.com and flash it via Odin.
Click to expand...
Click to collapse
THANKS for reply i downloaded all the firmware all failed...i even went into my wipe datat cache by holdin up on volume power key an home..key it said n71000 i donloaded that firmware to...all failed from that site...i can upload anything u likee plz help
What model is shown in download mode? If it says n7100, the phone is not from T-Mobile.
audit13 said:
What model is shown in download mode? If it says n7100, the phone is not from T-Mobile.
Click to expand...
Click to collapse
thaznks for repli after I rooted it it says at the top in red here i'll upload a video for you it says this n71000ccunfni1
It says n7100 in download mode?
KingHack12 said:
thaznks for repli after I rooted it it says at the top in red here i'll upload a video for you it says this n71000xxunfni1...but when I take battery from phone it says sgh-t889 at the top in red it says
android system recovery <3e>
kot49h.n7100xxufni1
and the rest is just a bunch of e:failed to mount/cache {no such file or directori)
e:cant mount /cahce/recorveri/last_recoveri
theres a lot more
Click to expand...
Click to collapse
let me check download mode 1 sec
download mode says sgh-t889 sorry my webcam actin ****ty
sorry download mode is fine its the recorvery mode
The model @ shown in download is the firmware you should be flashing, not the n7100.
Flash the latest ROM from here: http://www.sammobile.com/firmwares/database/SGH-T889/
audit13 said:
The model @ shown in download is the firmware you should be flashing, not the n7100.
Flash the latest ROM from here: http://www.sammobile.com/firmwares/database/SGH-T889/
Click to expand...
Click to collapse
hey thanks but I downloaded them all already all fails says operation failed to write...or something like that
What is the Odin error? Phone appears as a com device in Odin?Have you tried using different USB cables and USB ports?
audit13 said:
What is the Odin error? Phone appears as a com device in Odin?Have you tried using different USB cables and USB ports?
Click to expand...
Click to collapse
wahhhhh:crying::crying: I don't know the pit error is re partionin error and the stock flash is complete(write) operation failed....I used the same odin when I rooted my phone everything was fine....for 40 mins I downloaded gta sa then phone froze so I took battery out to restart and I was stuck on logo tried to reset my phone using the old fashion wipe/data factory reset.but nothing happens I never seen this screen befor the red 1
Your phone lols to have an n7100 recovery but it is a t889 in download mode.
lol so what the hell man it was that stupid one click root method or some **** that did it I could of factory reset just fine befor this...when I rooted I guess that chged my recorvery is ther sum way I can fix?
and thank for helpin m3
Just to confirm but you flashed t889 firmware in Odin?
nope never I just straight up rooted the phone...got stuck on the logo tried 1 flash 2 flash...got pissed of downloaded them all (sammobile) all failed all said same thing.....only thing that seems to do something is cwm4_fixed_forcm7-odin.tar
but never completes
So you never tried to flash t889 firmware from sammobile?
audit13 said:
So you never tried to flash t889 firmware from sammobile?
Click to expand...
Click to collapse
I might go to the store later or sometim3 next week but yes man..i downloaded all the firmwar on the page...al say complete write fail