Hi,
I just brick my i747 and after use debrick image of 4.4.2 my phone alive but problem is phone do not boot without sd card, someone suggest me to flash first I747UCUFNE4 4.4.2 bootloader file along with pit file , later install 4.4.2, so I dont have these fiels, really appreciate if someone help in this issue, thanks br
this will get you the UCUFNE4 bootloader and modem.
http://forum.xda-developers.com/showthread.php?t=2808654
sorry i dont have the pit file.
good luck, and remember that once you upgrade to KK ; you CANNOT downgrade or you will BRICK.
err on the side of kindness
This might help for the pit file: http://forum.xda-developers.com/showthread.php?t=1848264
thanks both of your, porblem solved
Im new to all of this, but I screwed up my phone flashing a stock image. Odin does see my phone but I get a error when i try to flash a pda file. ( I guess I get that error because im downgrading the software???) Anyway can someone point me in the right direction so i can download firmware where I do not get a error.
Also I am using odin 3.07
hunter99507 said:
Im new to all of this, but I screwed up my phone flashing a stock image. Odin does see my phone but I get a error when i try to flash a pda file. ( I guess I get that error because im downgrading the software???) Anyway can someone point me in the right direction so i can download firmware where I do not get a error.
Also I am using odin 3.07
Click to expand...
Click to collapse
post complete history of your phone
hunter99507 said:
Im new to all of this, but I screwed up my phone flashing a stock image. Odin does see my phone but I get a error when i try to flash a pda file. ( I guess I get that error because im downgrading the software???) Anyway can someone point me in the right direction so i can download firmware where I do not get a error.
Also I am using odin 3.07
Click to expand...
Click to collapse
What bootloader is on your phone? If you don't know, boot into download mode and look for a reference to warranty bit. If you see something about warranty bit, that means you have at least a 4.3 bootloader and you can't flash a stock ROM unless the ROM was compiled for flashing in Odin.
If you have at least the 4.3 bootloader, I suggest flashing Philz Touch custom recovery via Odin. Copy a CM10.2 or early CM11 ROM onto an external SD card, boot into recovery, and flash the ROM. This will at least get you phone running to determine exactly which bootloader and baseband are on your phone.
I'm not sure what bootloader I was on, I think it was mjb software . I assume I was on the latest and I tried to flash a previous version and now my phone is hard bricked. I bought a jig on eBay and it should come early this week. I guess what my next question is, is if I can get into download mode using the jig, what software would I need to flash using Odin 3.09.
Sorry I'm kinda new to Odin and the gs3 flashinng so I'm not familiar with it (I also have a nexus 5 so I'm used to using fastboot). Could someone post what files I need to get my gs3 back in order assuming I can get into download mode?
Thank you for all of your help, it sucks having a bricked phone and not really knowing how to fix it.
Does your phone turn on at all? If not, a jig probably won't help.
It does but doesnt turn on. When i hold the power button nothing happens and it does not vibrate. But when i plug it into the computer the usb sound goes off and the red led comes on (Charging phone LED). Do you think a jig will help?
When you connect the phone, what does it say in device manager? Of it says something like qusb load, it may be hard bricked.
audit13 said:
When you connect the phone, what does it say in device manager? Of it says something like qusb load, it may be hard bricked.
Click to expand...
Click to collapse
When i plug it into the computer it shows up as "Qualcomm HS-USB QDLoader 9008 (COM7)"
Does that mean im screwed? Is there anything I can do?
Since the phone will not go into download or recovery, you may have to have it jtagged. Before doing that, did you try to de-brick it?
This may help too: http://forum.xda-developers.com/showthread.php?t=2549068
Here is the PIT for Android Version 4.4.2
nsnobel2 said:
Hi,
I just brick my i747 and after use debrick image of 4.4.2 my phone alive but problem is phone do not boot without sd card, someone suggest me to flash first I747UCUFNE4 4.4.2 bootloader file along with pit file , later install 4.4.2, so I dont have these fiels, really appreciate if someone help in this issue, thanks br
Click to expand...
Click to collapse
4shared.com PIT_16GB_I747UCUFNE4_ATT_Andro id_4_4_2
What d'you mean?
01manu said:
4shared.com PIT_16GB_I747UCUFNE4_ATT_Andro id_4_4_2
Click to expand...
Click to collapse
D'you mean to search 4shared.com for "PIT_16GB_I747UCUFNE4_ATT_Android_4_4_2"?
pit samsung att android 4.4.2
LeDroidDummy said:
D'you mean to search 4shared.com for "PIT_16GB_I747UCUFNE4_ATT_Android_4_4_2"?
Click to expand...
Click to collapse
yes and writeme to [email protected] for the passwd o for the file and passwd
Thanks but...
01manu said:
yes and writeme to [email protected] for the passwd o for the file and passwd
Click to expand...
Click to collapse
Thanks 01manu, but when I search for that, there's a lot of results. Which one is it? (4shared{dot}com /web/q/#query=PIT_16GB_I747UCUFNE4_ATT_Android_4_4_2)
Here, try this.
https://forum.xda-developers.com/showthread.php?t=1848264
That should be the PIT file you need.
Related
my friend tried to root his T999 but messed up on a step im guessing so now his phone will boot straight to odin mode. i tried putting it in download mode and use odin3 to restore it back to stock but odin3 would get stuck at the "nand write start" stage. his phone says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." when it is powered up. does anybody know how to fix this issue?? any help would be great! i googled everything that i could think of and tried everything that was suggested but nothing works! thanks in advance!!
sushi829 said:
my friend tried to root his T999 but messed up on a step im guessing so now his phone will boot straight to odin mode. i tried putting it in download mode and use odin3 to restore it back to stock but odin3 would get stuck at the "nand write start" stage.
Click to expand...
Click to collapse
Contradictory. Is it in download mode or isn't it?
You did not say what was being flashed with Odin, either.
Phones do not boot into ODIN. You will have to provide more info so we can help.
Links to the ROM or software you used etc.
ok i shouldve explained this a little more clearly. when i power on the phone it says this...
ODIN MODE
PRODUCT NAME: SGH-T999
CUSTOM BINARY DOWNLOAD: Yes (10 COUNTS)
CURRENT BINARY: Custom
SYSTEM STATUS: Official
QUALCOMM SECUREBOOT: ENABLE
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
so i pulled the battery, put it in download mode (vol down + home + power) ran ODIN3, and tried to flash SGH-T999_TMB_T999UVALH2_T999TMBALH2_Original (which is a stock image) thats when it gets stuck at the NAND write start!!
I could be completely wrong but it appears you tried to install an incompatible rom.
are you talking about the SGH-T999_TMB_T999UVALH2_T999TMBALH2_Original file?
sushi829 said:
are you talking about the SGH-T999_TMB_T999UVALH2_T999TMBALH2_Original file?
Click to expand...
Click to collapse
Yes. I have not seen MBALH2 before regarding the tmo galaxy s3. I could be wrong. Hopefully someone more knowledgeable than me will chime in.
i also used this file too
T999UVDLJC_T999TMBDLJC_T999UVDLJC_HOME.tar
i downloaded the firmware from http://samsung-updates.com/device/?id=SGH-T999
sushi829 said:
i also used this file too
T999UVDLJC_T999TMBDLJC_T999UVDLJC_HOME.tar
i downloaded the firmware from http://samsung-updates.com/device/?id=SGH-T999
Click to expand...
Click to collapse
If I understand correctly you flashed that after the first one. I'm not a IT guy, but to the best of my understanding if you flash a ROM intended for another device you are going to have major issues. Sorry. I know my answers are not what you are looking for. I am trying to give you a heads up for your friends phone.
well i am trying to flash the correct firmware for his tmobile S3.
jcbofkc said:
If I understand correctly you flashed that after the first one. I'm not a IT guy, but to the best of my understanding if you flash a ROM intended for another device you are going to have major issues. Sorry. I know my answers are not what you are looking for. I am trying to give you a heads up for your friends phone.
Click to expand...
Click to collapse
He didn't flash the wrong file. Some other issue. Try a different data cable and USB port.
Hi,
I am trying to flash stock ROM on GT-n5100 with no success. I will first recap what I did:
1. Tried to flash N5100XXBMD1 EUR version from samsung-updates with odin and it failed with invalid volume size
2. Recovery was not working, I flashed CWM and recovery mode was still not working, only the gt-n5100 logo.
3. Flashed stock recovery, and recovery mode still not accesible, stuck in the same logo.
4. After flashing recovery, device booted in normal android. Tried to root using galaxy note 8.0 toolkit 1.1 and insecure boot method and now the device doesn't boot at all, it gets stuck in gt-n5100 logo.
5. I can enter download mode, but every stock firmware I try to flash fails with invalid volume size message on the tablet.
So, I think I may have a problem with the partitioning. I may have got broken somehow. Does someone have the pit file for N5100XXBMD1 ? or a 3 part stock firmware I can try to flash?
The pit file can be extracted from a working n5100 using Heimdall Suite in download mode. Maybe I can use a .pit file from another n5100 running N5100XXBMD1 ?
Also can you please tell if I'm doing something wrong? I double and triple checked all options in Odin.
Thank you.
aditzu_juice said:
Hi,
I am trying to flash stock ROM on GT-n5100 with no success. I will first recap what I did:
1. Tried to flash N5100XXBMD1 EUR version from samsung-updates with odin and it failed with invalid volume size
2. Recovery was not working, I flashed CWM and recovery mode was still not working, only the gt-n5100 logo.
3. Flashed stock recovery, and recovery mode still not accesible, stuck in the same logo.
4. After flashing recovery, device booted in normal android. Tried to root using galaxy note 8.0 toolkit 1.1 and insecure boot method and now the device doesn't boot at all, it gets stuck in gt-n5100 logo.
5. I can enter download mode, but every stock firmware I try to flash fails with invalid volume size message on the tablet.
So, I think I may have a problem with the partitioning. I may have got broken somehow. Does someone have the pit file for N5100XXBMD1 ? or a 3 part stock firmware I can try to flash?
The pit file can be extracted from a working n5100 using Heimdall Suite in download mode. Maybe I can use a .pit file from another n5100 running N5100XXBMD1 ?
Also can you please tell if I'm doing something wrong? I double and triple checked all options in Odin.
Thank you.
Click to expand...
Click to collapse
i got invalid volume size error on S III by Kies
then i flashed rom by Odin
so i suggest u first update or recover ur phone with kies and then flash another ROM by Odin
however restart PC and phone can help sometimes & also change USB port
:good:
x102x96x said:
i got invalid volume size error on S III by Kies
then i flashed rom by Odin
so i suggest u first update or recover ur phone with kies and then flash another ROM by Odin
however restart PC and phone can help sometimes & also change USB port
:good:
Click to expand...
Click to collapse
I tried to recover from Kies but the device is in download mode and it doesn't appear in kies emergency recovery. I will try from another PC/USB port tomorrow and post the result.
aditzu_juice said:
I tried to recover from Kies but the device is in download mode and it doesn't appear in kies emergency recovery. I will try from another PC/USB port tomorrow and post the result.
Click to expand...
Click to collapse
Tried from a different PC and same problem from Odin "Invalid volume size".I can't seem to find the serial number on the device to use Kies Firmware Initialization, but as I recall, yesterday when Android booted, Kies said that initialization is not supported for this device.
Anyway, can anyone extract the pitfile from their n5100? Or give me a serial number that works in Kies?
Thank you.
aditzu_juice said:
Tried from a different PC and same problem from Odin "Invalid volume size".I can't seem to find the serial number on the device to use Kies Firmware Initialization, but as I recall, yesterday when Android booted, Kies said that initialization is not supported for this device.
Anyway, can anyone extract the pitfile from their n5100? Or give me a serial number that works in Kies?
Thank you.
Click to expand...
Click to collapse
I checked from Kies with the serial number that I got from the box and it says "GT-N5100 does not support initializing".
Can someone with a N5100 extract the .pit file from it's tablet? It would be very helpful. I can guide you through the process using Heimdall 1.3.1. It is done in download mode.
Also if anyone has another idea on how to revive this tablet I would really appreciate it.
aditzu_juice said:
I checked from Kies with the serial number that I got from the box and it says "GT-N5100 does not support initializing".
Can someone with a N5100 extract the .pit file from it's tablet? It would be very helpful. I can guide you through the process using Heimdall 1.3.1. It is done in download mode.
Also if anyone has another idea on how to revive this tablet I would really appreciate it.
Click to expand...
Click to collapse
For anyone that can help me with this .pit file, It will not harm your tablet in any way. The procedure does not write anything to your tablet, You just nee to install Heimdall Suite on your pc, put the tablet in download mode, connect it and the app has a buton that says Download .pit file.
aditzu_juice said:
For anyone that can help me with this .pit file, It will not harm your tablet in any way. The procedure does not write anything to your tablet, You just nee to install Heimdall Suite on your pc, put the tablet in download mode, connect it and the app has a buton that says Download .pit file.
Click to expand...
Click to collapse
I guess no one has a couple of minutes to extract a .pit file from it's N5100
Ok then. I'll look into the option of sending the tablet to Samsung. Too bad I can't get help here, but at least I tried.
aditzu_juice said:
I guess no one has a couple of minutes to extract a .pit file from it's N5100
Ok then. I'll look into the option of sending the tablet to Samsung. Too bad I can't get help here, but at least I tried.
Click to expand...
Click to collapse
If you still need it, am happy to help if you give me your contact details
KXMWM said:
If you still need it, am happy to help if you give me your contact details
Click to expand...
Click to collapse
Thank you. I you have the pit file then I could use it. Can you post it here, maybe if anybody else has this problem will find it in the thread.
Hi,
did anyone send the pit file. I am in same condition and need it desperately.
nevermind, I solved the issue without a pit file
.pit file for gt-n5100 needed
KXMWM said:
If you still need it, am happy to help if you give me your contact details
Click to expand...
Click to collapse
Hello,
few days a go i flashed a new kernel on my note 8.0 and now it is soft bricked. You are my only hope to get that .pit file.
is it possible to get it from you please?
Thanks in advance
---------- Post added at 02:48 PM ---------- Previous post was at 02:42 PM ----------
mrmrmrmr said:
Hi,
did anyone send the pit file. I am in same condition and need it desperately.
nevermind, I solved the issue without a pit file
Click to expand...
Click to collapse
Do you mind telling us how did you solved your problem?? Thanks
useer said:
Hello,
few days a go i flashed a new kernel on my note 8.0 and now it is soft bricked. You are my only hope to get that .pit file.
is it possible to get it from you please?
Thanks in advance
---------- Post added at 02:48 PM ---------- Previous post was at 02:42 PM ----------
Do you mind telling us how did you solved your problem?? Thanks
Click to expand...
Click to collapse
i am uploading pit file and partition output from heimdall, its from version 4.2.2
hi
this img how it works?
Hey guys i got a phone that wont boot up, the inital issue was there was no baseband, so i tired to flash via ODIN the stock image onto the phone, it fails at the modem part. I've looked through a few threads and i think the PIT file might help me; but i cannot for the life of me find the pit file. Does anyone have the Note 2 pit file they can share?
thanks
eric303 said:
Hey guys i got a phone that wont boot up, the inital issue was there was no baseband, so i tired to flash via ODIN the stock image onto the phone, it fails at the modem part. I've looked through a few threads and i think the PIT file might help me; but i cannot for the life of me find the pit file. Does anyone have the Note 2 pit file they can share?
thanks
Click to expand...
Click to collapse
Does the phone boot and if so have you rooted. Have you tried flashing the modem thru recovery. http://forum.xda-developers.com/showthread.php?t=1916936 I couldn't get link to go to page 1 sorry... This wont help you personally but maybe someone with some time (more than me) could make a .pit for you. If not ill look at it tomorrow
Sent from my SGH-T889 using Tapatalk 4 Beta
deeznutz1977 said:
Does the phone boot and if so have you rooted. Have you tried flashing the modem thru recovery. http://forum.xda-developers.com/showthread.php?t=1916936 I couldn't get link to go to page 1 sorry... This wont help you personally but maybe someone with some time (more than me) could make a .pit for you. If not ill look at it tomorrow
Sent from my SGH-T889 using Tapatalk 4 Beta
Click to expand...
Click to collapse
the phone does not boot, and i do not have root. I have not tried flashing the modem through recovery as i dont have a custom recovery on there or a modem.zip
Update - so i was able to get the phone to boot up, installed root and TWRP, installed the note 2 modem but still baseband unknown. From i can understand so far is that its a Tmobile note2, my idiot friend tried to flash the n7100 SW on it, now its showing unknown baseband/IMEI. Is there a fix for this?
truwrxtacy said:
the phone does not boot, and i do not have root. I have not tried flashing the modem through recovery as i dont have a custom recovery on there or a modem.zip
Update - so i was able to get the phone to boot up, installed root and TWRP, installed the note 2 modem but still baseband unknown. From i can understand so far is that its a Tmobile note2, my idiot friend tried to flash the n7100 SW on it, now its showing unknown baseband/IMEI. Is there a fix for this?
Click to expand...
Click to collapse
try to flash via recovery some modems and do factory reset
someone has a thread with all modems
What version of ODIN were you using? Some earlier versions have issues w/ the modem part of newer phones... just a thought.
dwitherell said:
What version of ODIN were you using? Some earlier versions have issues w/ the modem part of newer phones... just a thought.
Click to expand...
Click to collapse
Good point dwith , i use 3.07
How did you?
truwrxtacy said:
the phone does not boot, and i do not have root. I have not tried flashing the modem through recovery as i dont have a custom recovery on there or a modem.zip
Update - so i was able to get the phone to boot up, installed root and TWRP, installed the note 2 modem but still baseband unknown. From i can understand so far is that its a Tmobile note2, my idiot friend tried to flash the n7100 SW on it, now its showing unknown baseband/IMEI. Is there a fix for this?
Click to expand...
Click to collapse
I have exact same error, but also mine wont enter recovery mode, only download mode.
Kind to share how you recovered your phone ?
dannyogolo said:
I have exact same error, but also mine wont enter recovery mode, only download mode.
Kind to share how you recovered your phone ?
Click to expand...
Click to collapse
Have you tried Kies? That has been reported to work for recovering from Loss of imei and partitioning by at least one person around here.
Hastily spouted for your befuddlement
wrong post sorry
hi may i know how to find a pit file for my note2
deeznutz1977 said:
Does the phone boot and if so have you rooted. Have you tried flashing the modem thru recovery. http://forum.xda-developers.com/showthread.php?t=1916936 I couldn't get link to go to page 1 sorry... This wont help you personally but maybe someone with some time (more than me) could make a .pit for you. If not ill look at it tomorrow
Sent from my SGH-T889 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I have note 2 but how to find the pit file, mine is active note2 korean version
I have spent days looking, turn on goes to kies firmware screen yet when i put in the model and s/n it shuts and the new samsung app to replace kies is of no help. I can get to the download screen and odin shows it up but no ATT 10.5 Tab S Sm-T807A firmware ANYWHERE.
Please help this is a very very expensive paperweight and im not affiliated with ATT so them helping me is out of the question.
Samobile.com
info.sven said:
Samobile.com
Click to expand...
Click to collapse
They dont have it for the SM-T807A
0 Results found
You searched for "sm-t807a"
It would better if you just explain what state the tablet is in and how it got to that state.
There is no official software for the t807a.
OK here how it goes,
The tablet was completely fine.
The original owner ( a family member) tried to root it and didnt accomplish it, somehow through his process it ended up softbricked.
I can enter he download mode for odin but no firmware for this LTE model.
When I turn it on it goes to the kies screen but kies doesnt recognize it, and when I enter the serial it buffers for 2 seconds then closes the process of kies.
Also it says device isnt supported and yes I have installed the right drivers and uninstalled kies numerous times.
The new replacement prog for Kies (forgot the name) is no help either.
Im terrified of what to do next as it does go to the odin screen just no firmware as I stated.
Any update, or could someone upload the stock firmware so i can use Odin on it.
Samsung told me ATT can flash it for free onto it so its deff a possibility however I do not have a ATT account so they cant help me.
It doesn't boot because the stock recovery has been wiped/replaced.
Thats assuming you have tried to boot recovery?
The att models are all bootloader locked.
I'm surprised a bootloader locked device even allowed an unsigned image to flash or did they use something like flashify?
The stock ota update was posted by someone here a while back. Your only chance is to pull the recovery from it and try and flash it in download mode. However odin may refuse to flash it.
If I can find it I can pull out the recovery.img and post a modified cf_autoroot which will try and flash the original recovery, that's if odin will even accept the image.
I was used with something like kingroot.
"The stock ota update was posted by someone here a while back. Your only chance is to pull the recovery from it and try and flash it in download mode. However odin may refuse to flash it.
If I can find it I can pull out the recovery.img and post a modified cf_autoroot which will try and flash the original recovery, that's if odin will even accept the image."
this i would highly appreciate as the firmwares not deleted just corrupted.
i have searched the whole web.
here is the link to the pulled stock sm-t807a files from a xda member
https://drive.google.com/folderview?id=0B7ndOWpeCEJ4NFVHZmtvTFN0UFU&usp=sharing
PowerfulJY, any successfull update with your SM-T807A journey?
I have the same problem as you, and Odin refuses to flash your firmware files
synphonica said:
PowerfulJY, any successfull update with your SM-T807A journey?
I have the same problem as you, and Odin refuses to flash your firmware files
Click to expand...
Click to collapse
The images won't flash as they are raw unsigned images.
The update should contain a signed recovery image, but may still not flash with odin as the tar package you make will not be signed either and odin may refuse to flash
There may be a way though, another member managed to brick their device by flashing twrp using Heimdall, but couldn't then flash back the stock recovery with Heimdall.
If somehow the stock recovery can be forced to flash with Heimdall then there's a chance of unbricking the device.
I worked just flashed the FW part through AP did it on a friends pc all is back to new.
if you need a link for the ripped files just pm me.
also odin was used.
ashyx said:
The images won't flash as they are raw unsigned images.
The update should contain a signed recovery image, but may still not flash with odin as the tar package you make will not be signed either and odin may refuse to flash
There may be a way though, another member managed to brick their device by flashing twrp using Heimdall, but couldn't then flash back the stock recovery with Heimdall.
If somehow the stock recovery can be forced to flash with Heimdall then there's a chance of unbricking the device.
Click to expand...
Click to collapse
Unfortunately, Heimdall shows the same behaviour as Odin has.
AFAIK they are using the same protocol and seems that recovery CRC/sign check done via device internally, not via flashing tool.
PowerfulJY said:
I worked just flashed the FW part through AP did it on a friends pc all is back to new.
if you need a link for the ripped files just pm me.
Click to expand...
Click to collapse
Please explain in more detail what you have done for the benefit of others.
---------- Post added at 03:22 PM ---------- Previous post was at 03:22 PM ----------
synphonica said:
Unfortunately, Heimdall shows the same behaviour as Odin has.
AFAIK they are using the same protocol and seems that recovery CRC/sign check done via device internally, not via flashing tool.
Click to expand...
Click to collapse
Did you use command line or gui?
I used GUI, i didnt do the bootloader or choose any special clickies, I simply tried another pc with the same FW and it flashed in a hearbeast with PASS.
USB hubs are the devil, TRY EVERY USB PORT YOU HAVE
Kies sucks so does the new one.
any issues PM me and ill set you straightm any public questions ask away.
You have to download the IMG files and use the IMG to TAR app, I will provide a ZIP with all tars included but I assure you dont start ****ing around with bootloader images stick to AP.
AT&T is he devil.
The new Rockstar Whipped Strawberry OWNS, Oraneg Creme is Meh.
PowerfulJY said:
I used GUI, i didnt do the bootloader or choose any special clickies, I simply tried another pc with the same FW and it flashed in a hearbeast with PASS.
USB hubs are the devil, TRY EVERY USB PORT YOU HAVE
Kies sucks so does the new one.
any issues PM me and ill set you straightm any public questions ask away.
You have to download the IMG files and use the IMG to TAR app, I will provide a ZIP with all tars included but I assure you dont start ****ing around with bootloader images stick to AP.
AT&T is he devil.
The new Rockstar Whipped Strawberry OWNS, Oraneg Creme is Meh.
Click to expand...
Click to collapse
The gui question was for synphonica about Heimdall.
Are you saying you flashed the images with odin? Which version and which images?
This has been tried before and failed.
Also what do you mean you tried a pc with the same firmware, same firmware as what?
I'm new to rooting so be gentle, I just bought a Galaxy Tab S 10.5 sm-t807a (AT&T) with Android 5.0.2 Lollipop. I want to backup the stock ROM (firmware) so I can go back just in case I bricked it when rooting or installing custom ROM. I searched the web but there are no clear instruction on how to do it for an unrooted sm-t807a. Can someone provide me with a step-by-step instruction? I can share my backup of the stock ROM afterward since there does not seem to be one on the web. Thank you in advance for your help.
cluver53 said:
I'm new to rooting so be gentle, I just bought a Galaxy Tab S 10.5 sm-t807a (AT&T) with Android 5.0.2 Lollipop. I want to backup the stock ROM (firmware) so I can go back just in case I bricked it when rooting or installing custom ROM. I searched the web but there are no clear instruction on how to do it for an unrooted sm-t807a. Can someone provide me with a step-by-step instruction? I can share my backup of the stock ROM afterward since there does not seem to be one on the web. Thank you in advance for your help.
Click to expand...
Click to collapse
You can only root with Kingroot, don't try any other method or you'll brick it nor can you install a custom kernel or recovery.
Once you have root you can pull the partition images with EFS PRO or PARTITION BACKUP.
The best way to have a back up is to catch the stock Firmware update.
This is tricky so research how to do it.
There is one backup I know of:
https://drive.google.com/folderview?id=0B7ndOWpeCEJ4NFVHZmtvTFN0UFU&usp=sharing
my note 4 sm-n910v does not do anything,only when i conect it to the computer shows up QHS_BULK.
I already tried unbrick image and now i can but into download mode but when i try to flash with PDA and PIT i got e_mmc write filed.
What can i do?
alfrecuba said:
my note 4 sm-n910v does not do anything,only when i conect it to the computer shows up QHS_BULK.
I already tried unbrick image and now i can but into download mode but when i try to flash with PDA and PIT i got e_mmc write filed.
What can i do?
Click to expand...
Click to collapse
You shouldnt be flashing pda bro , just to start with you should be flashing ap. secondly that is a very old odin to even have that option so upgrade and thirdly if a device turns on it is not hard bricked. You misinstalled an os you need to wipe . If you didnt screw up your recovery partition try from there if you cant....idk im not going to explain adb because its a lengthy explanation and you would have had to have it enabled in dev options to work so i guess flash anyway. you must be using samsung stock firmware or odin wouldnt flash it needs to be bpa1 or cq....i cant remeber the last 2 idrntifiers but its 6.0.1 the very first marshmellow . You cant get below 5.1.1. Its savable just relax and start over .
mojoswagger1980 said:
You shouldnt be flashing pda bro , just to start with you should be flashing ap. secondly that is a very old odin to even have that option so upgrade and thirdly if a device turns on it is not hard bricked. You misinstalled an os you need to wipe . If you didnt screw up your recovery partition try from there if you cant....idk im not going to explain adb because its a lengthy explanation and you would have had to have it enabled in dev options to work so i guess flash anyway. you must be using samsung stock firmware or odin wouldnt flash it needs to be bpa1 or cq....i cant remeber the last 2 idrntifiers but its 6.0.1 the very first marshmellow . You cant get below 5.1.1. Its savable just relax and start over .[/QUOT
sorry i mean AP not PDA, iam using last odin version,i have downloaded last 6.0.1 firmware from sammobile,and i tryed to flash on AP,fail and fail again, odin says no pit partition file,even i find pit file and tick repartition and it still saying same error,thanks for answering
Click to expand...
Click to collapse
alfrecuba said:
my note 4 sm-n910v does not do anything,only when i conect it to the computer shows up QHS_BULK.
I already tried unbrick image and now i can but into download mode but when i try to flash with PDA and PIT i got e_mmc write filed.
What can i do?
Click to expand...
Click to collapse
It sounds like your eMMC is failing
ryanbg said:
It sounds like your eMMC is failing
Click to expand...
Click to collapse
Or DM verity got tripped .
---------- Post added at 10:04 AM ---------- Previous post was at 10:01 AM ----------
alfrecuba said:
mojoswagger1980 said:
You shouldnt be flashing pda bro , just to start with you should be flashing ap. secondly that is a very old odin to even have that option so upgrade and thirdly if a device turns on it is not hard bricked. You misinstalled an os you need to wipe . If you didnt screw up your recovery partition try from there if you cant....idk im not going to explain adb because its a lengthy explanation and you would have had to have it enabled in dev options to work so i guess flash anyway. you must be using samsung stock firmware or odin wouldnt flash it needs to be bpa1 or cq....i cant remeber the last 2 idrntifiers but its 6.0.1 the very first marshmellow . You cant get below 5.1.1. Its savable just relax and start over .[/QUOT
sorry i mean AP not PDA, iam using last odin version,i have downloaded last 6.0.1 firmware from sammobile,and i tryed to flash on AP,fail and fail again, odin says no pit partition file,even i find pit file and tick repartition and it still saying same error,thanks for answering
Click to expand...
Click to collapse
Sorry bud i can't say I've ever heard of what your describing, (your phone shows up as q_bulk ) try flashing 5.1.1 bpa1 and see if it will take ... Hopefully it isn't a bad emmc chip
Click to expand...
Click to collapse