my note 4 sm-n910v does not do anything,only when i conect it to the computer shows up QHS_BULK.
I already tried unbrick image and now i can but into download mode but when i try to flash with PDA and PIT i got e_mmc write filed.
What can i do?
alfrecuba said:
my note 4 sm-n910v does not do anything,only when i conect it to the computer shows up QHS_BULK.
I already tried unbrick image and now i can but into download mode but when i try to flash with PDA and PIT i got e_mmc write filed.
What can i do?
Click to expand...
Click to collapse
You shouldnt be flashing pda bro , just to start with you should be flashing ap. secondly that is a very old odin to even have that option so upgrade and thirdly if a device turns on it is not hard bricked. You misinstalled an os you need to wipe . If you didnt screw up your recovery partition try from there if you cant....idk im not going to explain adb because its a lengthy explanation and you would have had to have it enabled in dev options to work so i guess flash anyway. you must be using samsung stock firmware or odin wouldnt flash it needs to be bpa1 or cq....i cant remeber the last 2 idrntifiers but its 6.0.1 the very first marshmellow . You cant get below 5.1.1. Its savable just relax and start over .
mojoswagger1980 said:
You shouldnt be flashing pda bro , just to start with you should be flashing ap. secondly that is a very old odin to even have that option so upgrade and thirdly if a device turns on it is not hard bricked. You misinstalled an os you need to wipe . If you didnt screw up your recovery partition try from there if you cant....idk im not going to explain adb because its a lengthy explanation and you would have had to have it enabled in dev options to work so i guess flash anyway. you must be using samsung stock firmware or odin wouldnt flash it needs to be bpa1 or cq....i cant remeber the last 2 idrntifiers but its 6.0.1 the very first marshmellow . You cant get below 5.1.1. Its savable just relax and start over .[/QUOT
sorry i mean AP not PDA, iam using last odin version,i have downloaded last 6.0.1 firmware from sammobile,and i tryed to flash on AP,fail and fail again, odin says no pit partition file,even i find pit file and tick repartition and it still saying same error,thanks for answering
Click to expand...
Click to collapse
alfrecuba said:
my note 4 sm-n910v does not do anything,only when i conect it to the computer shows up QHS_BULK.
I already tried unbrick image and now i can but into download mode but when i try to flash with PDA and PIT i got e_mmc write filed.
What can i do?
Click to expand...
Click to collapse
It sounds like your eMMC is failing
ryanbg said:
It sounds like your eMMC is failing
Click to expand...
Click to collapse
Or DM verity got tripped .
---------- Post added at 10:04 AM ---------- Previous post was at 10:01 AM ----------
alfrecuba said:
mojoswagger1980 said:
You shouldnt be flashing pda bro , just to start with you should be flashing ap. secondly that is a very old odin to even have that option so upgrade and thirdly if a device turns on it is not hard bricked. You misinstalled an os you need to wipe . If you didnt screw up your recovery partition try from there if you cant....idk im not going to explain adb because its a lengthy explanation and you would have had to have it enabled in dev options to work so i guess flash anyway. you must be using samsung stock firmware or odin wouldnt flash it needs to be bpa1 or cq....i cant remeber the last 2 idrntifiers but its 6.0.1 the very first marshmellow . You cant get below 5.1.1. Its savable just relax and start over .[/QUOT
sorry i mean AP not PDA, iam using last odin version,i have downloaded last 6.0.1 firmware from sammobile,and i tryed to flash on AP,fail and fail again, odin says no pit partition file,even i find pit file and tick repartition and it still saying same error,thanks for answering
Click to expand...
Click to collapse
Sorry bud i can't say I've ever heard of what your describing, (your phone shows up as q_bulk ) try flashing 5.1.1 bpa1 and see if it will take ... Hopefully it isn't a bad emmc chip
Click to expand...
Click to collapse
Related
Hi,
I am trying to flash stock ROM on GT-n5100 with no success. I will first recap what I did:
1. Tried to flash N5100XXBMD1 EUR version from samsung-updates with odin and it failed with invalid volume size
2. Recovery was not working, I flashed CWM and recovery mode was still not working, only the gt-n5100 logo.
3. Flashed stock recovery, and recovery mode still not accesible, stuck in the same logo.
4. After flashing recovery, device booted in normal android. Tried to root using galaxy note 8.0 toolkit 1.1 and insecure boot method and now the device doesn't boot at all, it gets stuck in gt-n5100 logo.
5. I can enter download mode, but every stock firmware I try to flash fails with invalid volume size message on the tablet.
So, I think I may have a problem with the partitioning. I may have got broken somehow. Does someone have the pit file for N5100XXBMD1 ? or a 3 part stock firmware I can try to flash?
The pit file can be extracted from a working n5100 using Heimdall Suite in download mode. Maybe I can use a .pit file from another n5100 running N5100XXBMD1 ?
Also can you please tell if I'm doing something wrong? I double and triple checked all options in Odin.
Thank you.
aditzu_juice said:
Hi,
I am trying to flash stock ROM on GT-n5100 with no success. I will first recap what I did:
1. Tried to flash N5100XXBMD1 EUR version from samsung-updates with odin and it failed with invalid volume size
2. Recovery was not working, I flashed CWM and recovery mode was still not working, only the gt-n5100 logo.
3. Flashed stock recovery, and recovery mode still not accesible, stuck in the same logo.
4. After flashing recovery, device booted in normal android. Tried to root using galaxy note 8.0 toolkit 1.1 and insecure boot method and now the device doesn't boot at all, it gets stuck in gt-n5100 logo.
5. I can enter download mode, but every stock firmware I try to flash fails with invalid volume size message on the tablet.
So, I think I may have a problem with the partitioning. I may have got broken somehow. Does someone have the pit file for N5100XXBMD1 ? or a 3 part stock firmware I can try to flash?
The pit file can be extracted from a working n5100 using Heimdall Suite in download mode. Maybe I can use a .pit file from another n5100 running N5100XXBMD1 ?
Also can you please tell if I'm doing something wrong? I double and triple checked all options in Odin.
Thank you.
Click to expand...
Click to collapse
i got invalid volume size error on S III by Kies
then i flashed rom by Odin
so i suggest u first update or recover ur phone with kies and then flash another ROM by Odin
however restart PC and phone can help sometimes & also change USB port
:good:
x102x96x said:
i got invalid volume size error on S III by Kies
then i flashed rom by Odin
so i suggest u first update or recover ur phone with kies and then flash another ROM by Odin
however restart PC and phone can help sometimes & also change USB port
:good:
Click to expand...
Click to collapse
I tried to recover from Kies but the device is in download mode and it doesn't appear in kies emergency recovery. I will try from another PC/USB port tomorrow and post the result.
aditzu_juice said:
I tried to recover from Kies but the device is in download mode and it doesn't appear in kies emergency recovery. I will try from another PC/USB port tomorrow and post the result.
Click to expand...
Click to collapse
Tried from a different PC and same problem from Odin "Invalid volume size".I can't seem to find the serial number on the device to use Kies Firmware Initialization, but as I recall, yesterday when Android booted, Kies said that initialization is not supported for this device.
Anyway, can anyone extract the pitfile from their n5100? Or give me a serial number that works in Kies?
Thank you.
aditzu_juice said:
Tried from a different PC and same problem from Odin "Invalid volume size".I can't seem to find the serial number on the device to use Kies Firmware Initialization, but as I recall, yesterday when Android booted, Kies said that initialization is not supported for this device.
Anyway, can anyone extract the pitfile from their n5100? Or give me a serial number that works in Kies?
Thank you.
Click to expand...
Click to collapse
I checked from Kies with the serial number that I got from the box and it says "GT-N5100 does not support initializing".
Can someone with a N5100 extract the .pit file from it's tablet? It would be very helpful. I can guide you through the process using Heimdall 1.3.1. It is done in download mode.
Also if anyone has another idea on how to revive this tablet I would really appreciate it.
aditzu_juice said:
I checked from Kies with the serial number that I got from the box and it says "GT-N5100 does not support initializing".
Can someone with a N5100 extract the .pit file from it's tablet? It would be very helpful. I can guide you through the process using Heimdall 1.3.1. It is done in download mode.
Also if anyone has another idea on how to revive this tablet I would really appreciate it.
Click to expand...
Click to collapse
For anyone that can help me with this .pit file, It will not harm your tablet in any way. The procedure does not write anything to your tablet, You just nee to install Heimdall Suite on your pc, put the tablet in download mode, connect it and the app has a buton that says Download .pit file.
aditzu_juice said:
For anyone that can help me with this .pit file, It will not harm your tablet in any way. The procedure does not write anything to your tablet, You just nee to install Heimdall Suite on your pc, put the tablet in download mode, connect it and the app has a buton that says Download .pit file.
Click to expand...
Click to collapse
I guess no one has a couple of minutes to extract a .pit file from it's N5100
Ok then. I'll look into the option of sending the tablet to Samsung. Too bad I can't get help here, but at least I tried.
aditzu_juice said:
I guess no one has a couple of minutes to extract a .pit file from it's N5100
Ok then. I'll look into the option of sending the tablet to Samsung. Too bad I can't get help here, but at least I tried.
Click to expand...
Click to collapse
If you still need it, am happy to help if you give me your contact details
KXMWM said:
If you still need it, am happy to help if you give me your contact details
Click to expand...
Click to collapse
Thank you. I you have the pit file then I could use it. Can you post it here, maybe if anybody else has this problem will find it in the thread.
Hi,
did anyone send the pit file. I am in same condition and need it desperately.
nevermind, I solved the issue without a pit file
.pit file for gt-n5100 needed
KXMWM said:
If you still need it, am happy to help if you give me your contact details
Click to expand...
Click to collapse
Hello,
few days a go i flashed a new kernel on my note 8.0 and now it is soft bricked. You are my only hope to get that .pit file.
is it possible to get it from you please?
Thanks in advance
---------- Post added at 02:48 PM ---------- Previous post was at 02:42 PM ----------
mrmrmrmr said:
Hi,
did anyone send the pit file. I am in same condition and need it desperately.
nevermind, I solved the issue without a pit file
Click to expand...
Click to collapse
Do you mind telling us how did you solved your problem?? Thanks
useer said:
Hello,
few days a go i flashed a new kernel on my note 8.0 and now it is soft bricked. You are my only hope to get that .pit file.
is it possible to get it from you please?
Thanks in advance
---------- Post added at 02:48 PM ---------- Previous post was at 02:42 PM ----------
Do you mind telling us how did you solved your problem?? Thanks
Click to expand...
Click to collapse
i am uploading pit file and partition output from heimdall, its from version 4.2.2
hi
this img how it works?
hello.
usually when I have a few flash the phone I like to leave the factory, which I put the factory oxa with partition marked in 5 files odin with pit, bootloader, code, modem (LJ2) and csc.
I've never had trouble oxa install the factory and I have done more than 20 times since upgrading to M16 (4.3) I have been unable to do the operation because when I have uploaded files to download odin and phone wire as I give to start the SET PARTITION makes an instant and I FAIL throws.
windows thereupon losing throws me Connect message pc / phone.
I've tried with two different pcs and does the same, they know they can be happening? the fault of the new base? I must do to stop factory new phone?
thank you very much
xavivts said:
hello.
usually when I have a few flash the phone I like to leave the factory, which I put the factory oxa with partition marked in 5 files odin with pit, bootloader, code, modem (LJ2) and csc.
I've never had trouble oxa install the factory and I have done more than 20 times since upgrading to M16 (4.3) I have been unable to do the operation because when I have uploaded files to download odin and phone wire as I give to start the SET PARTITION makes an instant and I FAIL throws.
windows thereupon losing throws me Connect message pc / phone.
I've tried with two different pcs and does the same, they know they can be happening? the fault of the new base? I must do to stop factory new phone?
thank you very much
Click to expand...
Click to collapse
Can SWe downgrade from 4.3 to 4.1.2?
lidootn said:
Can SWe downgrade from 4.3 to 4.1.2?
Click to expand...
Click to collapse
with cwm downgrade if you can make a nandroid backup, but I do it with odin to restore the factory.
regards
You can try to download default samsung firmware from sammobile and use Odin to install the firmware. For me it works.
Keanys said:
You can try to download default samsung firmware from sammobile and use Odin to install the firmware. For me it works.
Click to expand...
Click to collapse
Sure, thats better way xavivts.
Keanys said:
You can try to download default samsung firmware from sammobile and use Odin to install the firmware. For me it works.
Click to expand...
Click to collapse
Fataldose said:
Sure, thats better way xavivts.
Click to expand...
Click to collapse
thanks for your replies mates!!
I do not understand what is the difference of the files that I flash with factory oxa the samsung firmware.
I understand that the firmware in samfirmware there is only one file within a zip to put in pda only and oxa factory has 5 it is mentioned in the first post to leave the factory.
or you mean that first flash of a file and then the oxa factory?
thank you very much:laugh:
i"ve been stuck with this problem from a day now not able to downgrade . it gives me an error. and then tells me to connect to kies for recovery . if i try to flsh the 4.3 rom i'm not able to .after a system restart[comp] i'm able to boot 4.3 again can someone help me out :crying:
Vish2030 said:
i"ve been stuck with this problem from a day now not able to downgrade . it gives me an error. and then tells me to connect to kies for recovery . if i try to flsh the 4.3 rom i'm not able to .after a system restart[comp] i'm able to boot 4.3 again can someone help me out :crying:
Click to expand...
Click to collapse
recover through kies...............
happened to me also when i tried downgrading and raised my warranty void to 1
u cant downgrade as of now if u r on mk5
Hi,
I just brick my i747 and after use debrick image of 4.4.2 my phone alive but problem is phone do not boot without sd card, someone suggest me to flash first I747UCUFNE4 4.4.2 bootloader file along with pit file , later install 4.4.2, so I dont have these fiels, really appreciate if someone help in this issue, thanks br
this will get you the UCUFNE4 bootloader and modem.
http://forum.xda-developers.com/showthread.php?t=2808654
sorry i dont have the pit file.
good luck, and remember that once you upgrade to KK ; you CANNOT downgrade or you will BRICK.
err on the side of kindness
This might help for the pit file: http://forum.xda-developers.com/showthread.php?t=1848264
thanks both of your, porblem solved
Im new to all of this, but I screwed up my phone flashing a stock image. Odin does see my phone but I get a error when i try to flash a pda file. ( I guess I get that error because im downgrading the software???) Anyway can someone point me in the right direction so i can download firmware where I do not get a error.
Also I am using odin 3.07
hunter99507 said:
Im new to all of this, but I screwed up my phone flashing a stock image. Odin does see my phone but I get a error when i try to flash a pda file. ( I guess I get that error because im downgrading the software???) Anyway can someone point me in the right direction so i can download firmware where I do not get a error.
Also I am using odin 3.07
Click to expand...
Click to collapse
post complete history of your phone
hunter99507 said:
Im new to all of this, but I screwed up my phone flashing a stock image. Odin does see my phone but I get a error when i try to flash a pda file. ( I guess I get that error because im downgrading the software???) Anyway can someone point me in the right direction so i can download firmware where I do not get a error.
Also I am using odin 3.07
Click to expand...
Click to collapse
What bootloader is on your phone? If you don't know, boot into download mode and look for a reference to warranty bit. If you see something about warranty bit, that means you have at least a 4.3 bootloader and you can't flash a stock ROM unless the ROM was compiled for flashing in Odin.
If you have at least the 4.3 bootloader, I suggest flashing Philz Touch custom recovery via Odin. Copy a CM10.2 or early CM11 ROM onto an external SD card, boot into recovery, and flash the ROM. This will at least get you phone running to determine exactly which bootloader and baseband are on your phone.
I'm not sure what bootloader I was on, I think it was mjb software . I assume I was on the latest and I tried to flash a previous version and now my phone is hard bricked. I bought a jig on eBay and it should come early this week. I guess what my next question is, is if I can get into download mode using the jig, what software would I need to flash using Odin 3.09.
Sorry I'm kinda new to Odin and the gs3 flashinng so I'm not familiar with it (I also have a nexus 5 so I'm used to using fastboot). Could someone post what files I need to get my gs3 back in order assuming I can get into download mode?
Thank you for all of your help, it sucks having a bricked phone and not really knowing how to fix it.
Does your phone turn on at all? If not, a jig probably won't help.
It does but doesnt turn on. When i hold the power button nothing happens and it does not vibrate. But when i plug it into the computer the usb sound goes off and the red led comes on (Charging phone LED). Do you think a jig will help?
When you connect the phone, what does it say in device manager? Of it says something like qusb load, it may be hard bricked.
audit13 said:
When you connect the phone, what does it say in device manager? Of it says something like qusb load, it may be hard bricked.
Click to expand...
Click to collapse
When i plug it into the computer it shows up as "Qualcomm HS-USB QDLoader 9008 (COM7)"
Does that mean im screwed? Is there anything I can do?
Since the phone will not go into download or recovery, you may have to have it jtagged. Before doing that, did you try to de-brick it?
This may help too: http://forum.xda-developers.com/showthread.php?t=2549068
Here is the PIT for Android Version 4.4.2
nsnobel2 said:
Hi,
I just brick my i747 and after use debrick image of 4.4.2 my phone alive but problem is phone do not boot without sd card, someone suggest me to flash first I747UCUFNE4 4.4.2 bootloader file along with pit file , later install 4.4.2, so I dont have these fiels, really appreciate if someone help in this issue, thanks br
Click to expand...
Click to collapse
4shared.com PIT_16GB_I747UCUFNE4_ATT_Andro id_4_4_2
What d'you mean?
01manu said:
4shared.com PIT_16GB_I747UCUFNE4_ATT_Andro id_4_4_2
Click to expand...
Click to collapse
D'you mean to search 4shared.com for "PIT_16GB_I747UCUFNE4_ATT_Android_4_4_2"?
pit samsung att android 4.4.2
LeDroidDummy said:
D'you mean to search 4shared.com for "PIT_16GB_I747UCUFNE4_ATT_Android_4_4_2"?
Click to expand...
Click to collapse
yes and writeme to [email protected] for the passwd o for the file and passwd
Thanks but...
01manu said:
yes and writeme to [email protected] for the passwd o for the file and passwd
Click to expand...
Click to collapse
Thanks 01manu, but when I search for that, there's a lot of results. Which one is it? (4shared{dot}com /web/q/#query=PIT_16GB_I747UCUFNE4_ATT_Android_4_4_2)
Here, try this.
https://forum.xda-developers.com/showthread.php?t=1848264
That should be the PIT file you need.
Hi! I'm new in here.
I have a big problem. I putted on the resurrection remix 5.0 rom. But I didn't like it because of the camera, multiwindows, little bugs ecc.
So I wanted to turn to stock. So I downloaded the latest firmware H3G Italy 4.4.2 and flashed it with Odin 3.09 first and it didn't work and then with Odin 3.07 and it still didn't work. :crying: :crying: :crying: It is stuck on SAMSUNG whrite
Odin don't give me any errors. At the end it sees Pass! (something like that)
What can I do? Why stock is bricking my phone :crying:
Sorry for my bad english :crying::crying::crying:
don't worry just download 4 files software 4.4.2 then flash it by Odin
I had same as your problem before
HaZa3 said:
don't worry just download 4 files software 4.4.2 then flash it by Odin
I had same as your problem before
Click to expand...
Click to collapse
what do you mean with 4 files software? thanks god for your responding... and yours obviosly
bogdan1995 said:
what do you mean with 4 files software? thanks god for your responding... and yours obviosly
Click to expand...
Click to collapse
He means emergency firmware but not exist for 4.4.2, this was for 4.1.2 and you cannot flash because your bootloader not leaving downgrade first and if you flash 2cond you loose your imei because of efs partition upgrade. Probably you haven't factory reset your phone before flash, go to recovery and factory reset your phone and restart.
Send from my phone
vagsvag said:
He means emergency firmware but not exist for 4.4.2, this was for 4.1.2 and you cannot flash because your bootloader not leaving downgrade first and if you flash 2cond you loose your imei because of efs partition upgrade. Probably you haven't factory reset your phone before flash, go to recovery and factory reset your phone and restart.
Send from my phone
Click to expand...
Click to collapse
thank you man! i found in internet how to go to the recovery (i didn't try before because I didn't know I had a recovery ).
PROBLEM SOLVED. THANKS ALL OF YOU. YOU ARE SPECIAL GUYS.
ps: I'm in love with my stock... everything. at the end touchwhitz isn't so bad
Some people just post info and never post links . I had firmware for sometime already but i was waiting for other guy to post it. I know we all looking for full Odin files so here they are :
AP_N920AUCU4EQC6_CL10809541_QB12921033_REV00_user_lo w_ship_meta.tar
CSC_ATT_N920AATT4EQC6_CL10809541_QB12921033_REV00_use r_low_ship.tar
CP_N920AUCU4EQC6_CP6021124_CL10809541_QB12921033_REV 00_user_low_ship.tar
BL_N920AUCU4EQC6_CL10809541_QB12921033_REV00_user_lo w_ship.tar
Download Link of :
Nougat_N920AUCU4EQC6_Odin_Files
All this files are in one zip. Unzip and put this in appropriate windows in ODIN.
Here are Odin 3.12.3
Good Luck.
Of course, this will wipe my device again, even though I do not select the CSC?
If you allow it to flash a new system and user data image then yes.
You basically need a wipe anyways going from MM to Nougat.
Sent from my Galaxy Note5 using XDA Labs
I'm already on Nougat N920AUCU4EQC5. I'm just trying to avoid having to wipe my phone
When i use this. It passes Odin then when the phone tries to reboot and install the update it says deleting then im back to 6.0.1. Any idea why?
norbarb said:
Some people just post info and never post links . I had firmware for sometime already but i was waiting for other guy to post it. I know we all looking for full Odin files so here they are :
AP_N920AUCU4EQC6_CL10809541_QB12921033_REV00_user_lo w_ship_meta.tar
CSC_ATT_N920AATT4EQC6_CL10809541_QB12921033_REV00_use r_low_ship.tar
CP_N920AUCU4EQC6_CP6021124_CL10809541_QB12921033_REV 00_user_low_ship.tar
BL_N920AUCU4EQC6_CL10809541_QB12921033_REV00_user_lo w_ship.tar
Download Link of :
Nougat_N920AUCU4EQC6_Odin_Files
All this files are in one zip. Unzip and put this in appropriate windows in ODIN.
Good Luck.
Click to expand...
Click to collapse
thank you very much for the link, bro.. i'm already Nougated now. experiencing some blue screen, but when i'm using newest odin.. all fixed.. thx again, man, you are the best.
DuganNash said:
When i use this. It passes Odin then when the phone tries to reboot and install the update it says deleting then im back to 6.0.1. Any idea why?
Click to expand...
Click to collapse
You may use wrong odin, some security installed on your phone, What build are you on?
norbarb said:
You may use wrong odin, some security installed on your phone, What build are you on?
Click to expand...
Click to collapse
It is Odin 3.12 run as admin. it gives me the green pass, then bootloader rolls back to MM
I am on build QB2 as of now.
DuganNash said:
It is Odin 3.12 run as admin. it gives me the green pass, then bootloader rolls back to MM
I am on build QB2 as of now.
Click to expand...
Click to collapse
Can you post your about phone screen ?
norbarb said:
Can you post your about phone screen ?
Click to expand...
Click to collapse
here you go, thank you
DuganNash said:
here you go, thank you
Click to expand...
Click to collapse
Thanks. Ok. Do you have any security like any kind encryption installed on your phone ?
I update first post with newest ODIN. Are you unzipping file you download and put tar files in correct windows? Are you in Download mode when using ODIN ?
norbarb said:
Thanks. Ok. Do you have any security like any kind encryption installed on your phone ?
I update first post with newest ODIN. Are you unzipping file you download and put tar files in correct windows? Are you in Download mode when using ODIN ?
Click to expand...
Click to collapse
I'm not sure about security . It was a stock at note 5 until I tried updated to qb2. All dev factors are turned on, and the rar files are all unzipped and loaded through odin in download mode. It passes then the android update screen (the little robot ) says erasing upon revoot and I boot into mm again
DuganNash said:
I'm not sure about security . It was a stock at note 5 until I tried updated to qb2. All dev factors are turned on, and the rar files are all unzipped and loaded through odin in download mode. It passes then the android update screen (the little robot ) says erasing upon revoot and I boot into mm again
Click to expand...
Click to collapse
OK. Try this , After you unzip from one zip to 4 files , unzip all 4 files to tar.md5 and try ODIN again. Check for any encryption installed on your phone preventing bootloader from overwriting files.
norbarb said:
OK. Try this , After you unzip from one zip to 4 files , unzip all 4 files to tar.md5 and try ODIN again. Check for any encryption installed on your phone preventing bootloader from overwriting files.
Click to expand...
Click to collapse
i tried this after making sure the phone was not encrypted under the security setting. Same result unfortunately. am looking for alternatives
You're the man !! just the files Odin I was looking for. I want to marry with you ... make me a son jajaja
DuganNash said:
i tried this after making sure the phone was not encrypted under the security setting. Same result unfortunately. am looking for alternatives
Click to expand...
Click to collapse
You have to necessarily erase the security lock fingerprints, you also have to remove the password lock, you have not any type of security lock, then you have to enable developer options and type USB debugging(This last one I do not know if it is strictly necessary, but just in case)If you have some security lock on your phone, even if you pray, you will not be able to!
After update installation it is sayin(device didn't have DRK,please install DRK first)
Please help me
Thanks
TaimooR Khawaja said:
After update installation it is sayin(device didn't have DRK,please install DRK first)
Please help me
Thanks
Click to expand...
Click to collapse
What did you flash before this stock firmware?
DRK=device root key
Clicking from Edge of Galaxy
Just a thought, can you Odin flash any other version of the official AT&T firmware? Maybe try another version to see if the phone is truly screwed.
Also, have you tried a factory reset on the phone first. Maybe something (anything) loaded on the phone is preventing the Odin flash. I know this shouldn't matter but it's worth a try.
mattern1974 said:
Just a thought, can you Odin flash any other version of the official AT&T firmware? Maybe try another version to see if the phone is truly screwed.
Also, have you tried a factory reset on the phone first. Maybe something (anything) loaded on the phone is preventing the Odin flash. I know this shouldn't matter but it's worth a try.
Click to expand...
Click to collapse
Same here.. i try to flash it via odin v3.12 it showing pass message..
After reboot my phone still on MM 6.0.1