Hi, I am a rooted Samsung Galaxy Duos i9082, with a Paranoid 4.4.4 Kitkat Rom. Now recently i tried to go back to stock but was unsuccessful. I tried to install the CM10.1 Based MIUI we have for our phones, But was unsuccessful again. What the problem is that when i try to boot after flashing a 4.2.2 ROM .. It's stuck on the Samsung Galaxy Logo and wont go further even after 30 minutes. Later that day i tried reinstalling Paranoid 4.4.4 kitkat ROM and it boot up in a Jiffy. If anyone can provide me with a solution I would be really grateful. I really wanna use the Stock rom again !
Draconius007 said:
Hi, I am a rooted Samsung Galaxy Duos i9082, with a Paranoid 4.4.4 Kitkat Rom. Now recently i tried to go back to stock but was unsuccessful. I tried to install the CM10.1 Based MIUI we have for our phones, But was unsuccessful again. What the problem is that when i try to boot after flashing a 4.2.2 ROM .. It's stuck on the Samsung Galaxy Logo and wont go further even after 30 minutes. Later that day i tried reinstalling Paranoid 4.4.4 kitkat ROM and it boot up in a Jiffy. If anyone can provide me with a solution I would be really grateful. I really wanna use the Stock rom again !
Click to expand...
Click to collapse
its to easy i face this my self and i solved it by myself too
first when u download 4.2.2 zip download it direct to phone or pc but move it to sdcard with card reader not cable :good:
in recovery make full format
tell me if this work
Don Anas said:
its to easy i face this my self and i solved it by myself too
first when u download 4.2.2 zip download it direct to phone or pc but move it to sdcard with card reader not cable :good:
in recovery make full format
tell me if this work
Click to expand...
Click to collapse
Thanks a lot ... I have a question tho ... When i download the ROM.. do i keep it on the internal storage and the transfer to SD card via any file manager and then flash ? Because i flashed roms .... but i couldnt boot ... But 4.4 roms easily install ... I am on Carbon 4.4.4 now ...
Draconius007 said:
Thanks a lot ... I have a question tho ... When i download the ROM.. do i keep it on the internal storage and the transfer to SD card via any file manager and then flash ? Because i flashed roms .... but i couldnt boot ... But 4.4 roms easily install ... I am on Carbon 4.4.4 now ...
Click to expand...
Click to collapse
yes u can
tell me u try to falsh TouchWiz Revolution 4.2.2 right ??
Don Anas said:
yes u can
tell me u try to falsh TouchWiz Revolution 4.2.2 right ??
Click to expand...
Click to collapse
Yes ... Yes I was !
Draconius007 said:
Yes ... Yes I was !
Click to expand...
Click to collapse
Hhhhh I know it bro just change the ROM name toTouchWizRevolution and flash it it well work
Tell me result
Don Anas said:
Hhhhh I know it bro just change the ROM name toTouchWizRevolution and flash it it well work
Tell me result
Click to expand...
Click to collapse
Dude ... I tried it ... The rom flashed ... But it wont boot up at all !!
Draconius007 said:
Hi, I am a rooted Samsung Galaxy Duos i9082, with a Paranoid 4.4.4 Kitkat Rom. Now recently i tried to go back to stock but was unsuccessful. I tried to install the CM10.1 Based MIUI we have for our phones, But was unsuccessful again. What the problem is that when i try to boot after flashing a 4.2.2 ROM .. It's stuck on the Samsung Galaxy Logo and wont go further even after 30 minutes. Later that day i tried reinstalling Paranoid 4.4.4 kitkat ROM and it boot up in a Jiffy. If anyone can provide me with a solution I would be really grateful. I really wanna use the Stock rom again !
Click to expand...
Click to collapse
Its a Bootloader issue. Kitkat rom needs 4.2.2 bootloader while cm 10.1 or miui based on it requires 4.1.2 bootloader. This means you need 4.1.2 stock rom on phone before you install cm 10.1 miui rom
Thats why cm10.1 based miui is not booting up while Kitkat based roms are booting fine.
Developer of touchwiz revolution has stated that rom boots on 4.2.2 or 4.4.2 based rom
Have u tried wiping data, cache?
If yes and rom still doesn't boot. Then I suggest you to flash stock firmware though Odin. Let it boot again. And then install the recovery again via odin
Odin v3.04 is recommended.
Now you have a rooted phone and Kitkat based rom then while flashing touchwiz revolution 4.2.2
I will suggest you to format /system, /data, /cache through the recovery Then flash the TW revorevolution 4.2.2 rom.
Draconius007 said:
Dude ... I tried it ... The rom flashed ... But it wont boot up at all !!
Click to expand...
Click to collapse
dude its not bootloader issue im sure did u try chang recovery ???
did u try to flash another 4.2.2 rom ??
this rom have alot issues try GENNXT SUPERIOR ROM its good rom
Related
Hi Guys.
Clockwork doesnt seem to install any roms on my GT-19082l for some reason.
When i click on a rom, it says that package is installed but when I reboot the phone, it's stuck at the "samsung galaxy grand" page.
Wat do?
migloredan said:
Hi Guys.
Clockwork doesnt seem to install any roms on my GT-19082l for some reason.
When i click on a rom, it says that package is installed but when I reboot the phone, it's stuck at the "samsung galaxy grand" page.
Wat do?
Click to expand...
Click to collapse
First tell which Rom u tried flashing and on which firmware u were!!!
Sent from my GT-I9082 using Tapatalk 4
migloredan said:
Hi Guys.
Clockwork doesnt seem to install any roms on my GT-19082l for some reason.
When i click on a rom, it says that package is installed but when I reboot the phone, it's stuck at the "samsung galaxy grand" page.
Wat do?
Click to expand...
Click to collapse
Take the recovery .tar file from here according to your firmware (4.1.2 or 4.2.2) : http://forum.xda-developers.com/showthread.php?t=2315529
Then follow this step by step instructions : http://forum.xda-developers.com/showpost.php?p=46395577&postcount=19
This will have to be done each time you flash a firmware through Odin.
If after flashing you get a bootloop, simply boot into recovery and clear cache and dalvik cache and you'll be good :good:
iceyhotguy said:
Take the recovery .tar file from here according to your firmware (4.1.2 or 4.2.2) : http://forum.xda-developers.com/showthread.php?t=2315529
Then follow this step by step instructions : http://forum.xda-developers.com/showpost.php?p=46395577&postcount=19
This will have to be done each time you flash a firmware through Odin.
If after flashing you get a bootloop, simply boot into recovery and clear cache and dalvik cache and you'll be good :good:
Click to expand...
Click to collapse
Sorry for the late reply, been busy with school.
But will this work with the GT-i9082l? I know some firmware doesn't work with other variants of this phone.
Also I have ClockworkMod Recovery 6.0.4.4 and I was trying to flash Cyanogen Mod 10.1 for the Grand.
Please Help
Guys please help.
migloredan said:
Sorry for the late reply, been busy with school.
But will this work with the GT-i9082l? I know some firmware doesn't work with other variants of this phone.
Also I have ClockworkMod Recovery 6.0.4.4 and I was trying to flash Cyanogen Mod 10.1 for the Grand.
Click to expand...
Click to collapse
Yea same will work for i9082L, just make sure the recovery you are using is compatible with 4.1.2 or 4.2.2, whichever you are flashing it on.
You can flash CM10.1 through any recovery you are using (but CM10.1 only works on 4.1.2 firmware)
iceyhotguy said:
Yea same will work for i9082L, just make sure the recovery you are using is compatible with 4.1.2 or 4.2.2, whichever you are flashing it on.
You can flash CM10.1 through any recovery you are using (but CM10.1 only works on 4.1.2 firmware)
Click to expand...
Click to collapse
Could I Put this on the sdcard instead of the internal memory?
Also this is what it says when ever i try to flash CM 10.1 or any other ROM
Finding update package...
Opening update Package...
Installing update...
Install from sdcard complete.
Then when I reboot the phone it stays at the Samsung Galaxy Grand page.
migloredan said:
Also this is what it says when ever i try to flash CM 10.1 or any other ROM
Finding update package...
Opening update Package...
Installing update...
Install from sdcard complete.
Then when I reboot the phone it stays at the Samsung Galaxy Grand page.
Click to expand...
Click to collapse
Yes you can put it on sd card.
Make sure you are on 4.1.2 before installing CM10.1, if you are not that's the reason for your bootloop.
And wipe data/cache/dalvik before flashing CM10.1 or any other ROM.
Still doesnt work. :crying:
It was stock 4.1.2, then I tried to update it to 4.2.2 using ODIN but it failed (This is the reason why i'm trying to install CM 10.1).
Is the phone 4.2.2 or 4.1.2?
migloredan said:
Still doesnt work. :crying:
It was stock 4.1.2, then I tried to update it to 4.2.2 using ODIN but it failed (This is the reason why i'm trying to install CM 10.1).
Is the phone 4.2.2 or 4.1.2?
Click to expand...
Click to collapse
Your firmware flash failed in the middle? If this happened you need to reflash the 4.1.2 firmware before you can flash any ROM on it.
iceyhotguy said:
Your firmware flash failed in the middle? If this happened you need to reflash the 4.1.2 firmware before you can flash any ROM on it.
Click to expand...
Click to collapse
Do you know where to get the firmware? Or a guide I can follow? Most download links are from hotfile and it shut down.
Thanks for helping btw.
migloredan said:
Do you know where to get the firmware? Or a guide I can follow? Most download links are from hotfile and it shut down.
Thanks for helping btw.
Click to expand...
Click to collapse
You can try searching the XDA threads or google, I don't know of any firmware mirrors for i9082L sorry
iceyhotguy said:
You can try searching the XDA threads or google, I don't know of any firmware mirrors for i9082L sorry
Click to expand...
Click to collapse
I found firmware on sam mobile, will try it out.
Hope this works. :fingers-crossed:
hey everyone , excuse my english iam still beginner.
i have i747 ATT and i was running on 4.2.1 , but i decide to get updated with 4.3 , i did download it and flash it but after doing all that the phone stops at setup screen showing nothing except apps has stop working example. unfortunately Samsung cloud data relay has stopped
please help and what i should do , thanks to you all
salahddine said:
hey everyone , excuse my english iam still beginner.
i have i747 ATT and i was running on 4.2.1 , but i decide to get updated with 4.3 , i did download it and flash it but after doing all that the phone stops at setup screen showing nothing except apps has stop working example. unfortunately Samsung cloud data relay has stopped
please help and what i should do , thanks to you all
Click to expand...
Click to collapse
Did you mean 4.1.2 or were you running a custom ROM as there is no official 4.2.1 for the i747? How did you download and flash the 4.3 ROM?
Can you try booting into recovery and doing a hard wipe/reset from there? If this doesn't solve it, then you may need to restore the system image via custom recovery.
Larry2999 said:
Did you mean 4.1.2 or were you running a custom ROM as there is no official 4.2.1 for the i747? How did you download and flash the 4.3 ROM?
Can you try booting into recovery and doing a hard wipe/reset from there? If this doesn't solve it, then you may need to restore the system image via custom recovery.
Click to expand...
Click to collapse
yes sorry i mean . 4.1.2 , i can boot to recovery mode and download mode too , i did wipe cash i did wipe data too but nothing works ,
Stock OTA Update 4.3 I747UCUEMJB 623.1MB , i did download that rom , if you need to know anything else please ask i really need your help
salahddine said:
yes sorry i mean . 4.1.2 , i can boot to recovery mode and download mode too , i did wipe cash i did wipe data too but nothing works ,
Stock OTA Update 4.3 I747UCUEMJB 623.1MB , i did download that rom , if you need to know anything else please ask i really need your help
Click to expand...
Click to collapse
You updated to 4.3 by going over the air or via Odin?
audit13 said:
You updated to 4.3 by going over the air or via Odin?
Click to expand...
Click to collapse
The 623mb file sounds like the stock image for (official) OTA updates. Most likely it was downloaded and flashed as a zip via recovery. I'm not quite sure it works that way.
Salahddine, since you can get into download and recovery modes, your best option now may be to do a complete stock restore via custom recovery. See the thread below for instructions. You may need to first flash custom recovery although I'd guess you probably have custom recovery installed already.
http://forum.xda-developers.com/showthread.php?t=2658486
Download the relevant file posted in the link to your phone's internal SD card or to an external micro SDHC card and place in your phone. Boot into recovery mode and flash the zip. Hopefully, this should fix it.
Larry2999 said:
The 623mb file sounds like the stock image for (official) OTA updates. Most likely it was downloaded and flashed as a zip via recovery. I'm not quite sure it works that way.
Salahddine, since you can get into download and recovery modes, your best option now may be to do a complete stock restore via custom recovery. See the thread below for instructions. You may need to first flash custom recovery although I'd guess you probably have custom recovery installed already.
http://forum.xda-developers.com/showthread.php?t=2658486
Download the relevant file posted in the link to your phone's internal SD card or to an external micro SDHC card and place in your phone. Boot into recovery mode and flash the zip. Hopefully, this should fix it.
Click to expand...
Click to collapse
audit13 said:
You updated to 4.3 by going over the air or via Odin?
Click to expand...
Click to collapse
thank you all for your support and caring , i did downgrade it to 4.0.4 , then i did face some problems like messaging stopped working and other things , then i did install RCWM 6.0.4.3 via odin , then i did install custom rom , then i did install d2att_I747UCUEMJ2_root_noknox and now everything works fine . i thank you all again for your caring
and about your question iam from morocco i cant get ON THE AIR , i did try it many times but didnt work so i did download that stock ROM 623 mb and i did flash from sd card
salahddine said:
thank you all for your support and caring , i did downgrade it to 4.0.4 , then i did face some problems like messaging stopped working and other things , then i did install RCWM 6.0.4.3 via odin , then i did install custom rom , then i did install d2att_I747UCUEMJ2_root_noknox and now everything works fine . i thank you all again for your caring
and about your question iam from morocco i cant get ON THE AIR , i did try it many times but didnt work so i did download that stock ROM 623 mb and i did flash from sd card
Click to expand...
Click to collapse
Sorry, my initial assessment was wrong. The 623MB zip you flashed was not the OTA file but the stock ROM which should have been flashed along with the modem and kernel zips at the same time. The reason for the initial failure was likely because you did not flash the kernel (and modem) zips. Glad to know it's working fine now.
Hi ..
My device is P601 using JB 4.3 and i have rooted it and installed TWRP then i did a format to flash a 4.4 ROM ..
After flashing the rom the device doesnt boot and stop at samsung logo .. i reboot to recovery and try to format or factory reset but i got a message :
http://store1.up-00.com/2014-06/1402226926891.jpg
What can i do to solve this problem ?
Sorry for bad english
alfares43 said:
Hi ..
My device is P601 using JB 4.3 and i have rooted it and installed TWRP then i did a format to flash a 4.4 ROM ..
After flashing the rom the device doesnt boot and stop at samsung logo .. i reboot to recovery and try to format or factory reset but i got a message :
http://store1.up-00.com/2014-06/1402226926891.jpg
What can i do to solve this problem ?
Sorry for bad english
Click to expand...
Click to collapse
Not 100% sure but looks like you flashed with reactivation lock on... Only way I know is to flash original stock rom but you may have flashed the new Kitkat bootloader.
You will need the Kitkat rom for your region to fix...
ultramag69 said:
Not 100% sure but looks like you flashed with reactivation lock on... Only way I know is to flash original stock rom but you may have flashed the new Kitkat bootloader.
You will need the Kitkat rom for your region to fix...
Click to expand...
Click to collapse
Actually i didnt flashed the stock kitkat 4.4 ..
My device had 4.3 then i flashed kitkat Rom(not stock) then i get this problem
anyway i will try to flash the stock one and see if it will solve the problem or not
thanks for your replay
alfares43 said:
Actually i didnt flashed the stock kitkat 4.4 ..
My device had 4.3 then i flashed kitkat Rom(not stock) then i get this problem
anyway i will try to flash the stock one and see if it will solve the problem or not
thanks for your replay
Click to expand...
Click to collapse
Mate, flash stock JB... Don't throw a new OS into the mix... It's easier if you use what you have 1st, fix it, then upgrade...
Ok bro i will try ...
Thanks for your help
Sounds like you tried to flash a KK rom with out flashing the KK bootloader.
Hi ...
ultramag69 said:
Not 100% sure but looks like you flashed with reactivation lock on... Only way I know is to flash original stock rom but you may have flashed the new Kitkat bootloader.
You will need the Kitkat rom for your region to fix...
Click to expand...
Click to collapse
Dear friend ... Seems your skilled about this tablet ... So maybe you can help me with my problem :
I were having problem with my nand memory so I managed to flash a ROM with having the " Wipe NAND all " ticked in Odin and after that I found that the phone wont boot so I thought it might be from the bootloader and updated the bootloader to KK and now I can't get my tablet to even boot android and also I can't mount /data ... is there any solution for me ? ... is there any way to get that JB firmware flashed on my tab ? ... is there any way to even boot the android to pick my files ? ... thanks in advance ...
With Best Wishes
Hitman1376
hitman1376 said:
Dear friend ... Seems your skilled about this tablet ... So maybe you can help me with my problem :
I were having problem with my nand memory so I managed to flash a ROM with having the " Wipe NAND all " ticked in Odin and after that I found that the phone wont boot so I thought it might be from the bootloader and updated the bootloader to KK and now I can't get my tablet to even boot android and also I can't mount /data ... is there any solution for me ? ... is there any way to get that JB firmware flashed on my tab ? ... is there any way to even boot the android to pick my files ? ... thanks in advance ...
With Best Wishes
Hitman1376
Click to expand...
Click to collapse
Your problem is that you have flashed Xkat ROm without first flashing a stock 4.4.2 as clearly mentioned in the installation instructions of the ROM.
I think that now you have to try to flash A Stock 4.4.2 with Odin to get your tablet working again.
Well ...
Tilagoon said:
Your problem is that you have flashed Xkat ROm without first flashing a stock 4.4.2 as clearly mentioned in the installation instructions of the ROM.
I think that now you have to try to flash A Stock 4.4.2 with Odin to get your tablet working again.
Click to expand...
Click to collapse
Thanks for the reply man ... but I have flashed a stock ROM not a custom and non of my stock ROMs booted ... Thanks again
With best Wishes
Hitman1376
im in a stock rom 4.2.2 but i want to install custom roms such as touchwizv10 or any other 4.2.2 custom roms. after downloading the custom rom files it says installation complete but doesnt take much time. and after i reboot my phone it doesnt change anything. im still at my current rom! i also tried different selinux recovery the latest one and the recommended ones for the roms but still the same. i dont know the problem at all. i followed each step but same. and if i flash roms higher than 4.2.2 it works well. dunno what the problem?
need help tyvm.
TatsuyaKaneki2015 said:
im in a stock rom 4.2.2 but i want to install custom roms such as touchwizv10 or any other 4.2.2 custom roms. after downloading the custom rom files it says installation complete but doesnt take much time. and after i reboot my phone it doesnt change anything. im still at my current rom! i also tried different selinux recovery the latest one and the recommended ones for the roms but still the same. i dont know the problem at all. i followed each step but same. and if i flash roms higher than 4.2.2 it works well. dunno what the problem?
need help tyvm.
Click to expand...
Click to collapse
bro are u using the recovery that is recommended in every rom ur flashing?
Rommel Espinosa said:
bro are u using the recovery that is recommended in every rom ur flashing?
Click to expand...
Click to collapse
no bro. actually i just used the recommended recovery in flashing the touchwizv10 because it says there. but what im actually using in flashing rom is the latest recovery. its working everytime i flashed roms in kitkat and lollipop but when i flashed 4.2.2 custom roms its not working aside from touchwiz i tried other 4.2.2 but still the same result .
TatsuyaKaneki2015 said:
no bro. actually i just used the recommended recovery in flashing the touchwizv10 because it says there. but what im actually using in flashing rom is the latest recovery. its working everytime i flashed roms in kitkat and lollipop but when i flashed 4.2.2 custom roms its not working aside from touchwiz i tried other 4.2.2 but still the same result .
Click to expand...
Click to collapse
ahm i dont know what to do bro i cant figure out what to do with that..lately when im reverting to android 5.1 came from touchwiz v10 its difficult to do im getting a black blank display
Rommel Espinosa said:
ahm i dont know what to do bro i cant figure out what to do with that..lately when im reverting to android 5.1 came from touchwiz v10 its difficult to do im getting a black blank display
Click to expand...
Click to collapse
ok bro maybe i should go back to kitkat . anyway thank for the help bro
I am currently on dn4 v2.1 and want ot get back to stock please someone help me will be really glad
can i use this method
http://forum.xda-developers.com/showthread.php?t=2088809
advance thankssss
MD0038 said:
I am currently on dn4 v2.1 and want ot get back to stock please someone help me will be really glad
can i use this method
http://forum.xda-developers.com/showthread.php?t=2088809
advance thankssss
Click to expand...
Click to collapse
Step1- Download Stock ROM from SAMMOBILE (for your device)
Step2- since you are in DN4... you would be having custom ROM -- clean your device by formating system/data/cache/etc etc
Step3- go to download mode (volume down+menu+power) and connect to your PC where ODIN is running...ensure you have Samsung USB driver installed on your PC
Step4- flash stock ROM downloaded in step 1
that is it....
Cheers
Ashtwinks said:
Step1- Download Stock ROM from SAMMOBILE (for your device)
Step2- since you are in DN4... you would be having custom ROM -- clean your device by formating system/data/cache/etc etc
Step3- go to download mode (volume down+menu+power) and connect to your PC where ODIN is running...ensure you have Samsung USB driver installed on your PC
Step4- flash stock ROM downloaded in step 1
that is it....
Cheers
Click to expand...
Click to collapse
wont it delete efs modem n stuff
jus being sure coz android version in mobile shows 4.4.4 and sammobile shows 4.4.2 and i have some different bootloader
MD0038 said:
wont it delete efs modem n stuff
jus being sure coz android version in mobile shows 4.4.4 and sammobile shows 4.4.2 and i have some different bootloader
Click to expand...
Click to collapse
No It wont.... System, Data, Internal storage are the ones you should clean up when ever you change your ROM...
Samsung stopped at 4.4.2 for Note 2
DN4.2 is TOUCHWIZ at 4.4.4 (SG3 base ROM)
CM12.1 is AOSP, 5.1.1 r8