i don't know how i did that stupid thing ! i'm using note 2 gt-n7100 ( rooted ) i tried to install a new rom that doesn't built for my phone with " mobile odin v 4.2 pro unfortunately it flashed the sumsung star dous stock rom on my mobile but it doesn't boot .. i entered the philz touch recovery menu and select clean to install a new rom and restore my old rom and the problems started to appear !
the first thing is when i press the power button to lock my note 2 and try to open it again i find no response at all and the only way is to remove the battery and re turn it on again and try not to press the lock button as if i do so my mobile gives me no response and the screen doesn't turn on !
the second matter i noticed that when the start up i found the bluetooth icon trying to turn to green like i'm turning the bluetooth on but a few seconds it didn't turn on even i try to turn it ! the bluetooth doesn't work at all !
the third thing when i recieve a call that turn on the proximty sensor automatically if i touch the sensor the screen go black but i lose the control and give me no response at all and i have to remove the battery and turn it on again !
the things i noticed when i flashed the galaxy star rom with mobile odin that it has partion called param and the note to doesn't have it with its rom but have partion called modem which i didn't found in the galaxy star rom !
i need help please how i delete things that caused that conflict .. i tried to reflash the stock rom of my note with odin on my lap top but nothig changed and it hanging and the screen freezes with no control at all and that happened when i try to use a custom rom and flash it through the recovery .. please help urgently
sorry for my bad english
Two options I see:
1. Try to restore your device using Kies3
2. Flash newest firmware (get it from sammobile) for your region using PC-Odin.
Putting "need help urgently please :'(" does not help you in any way, in fact it makes it more likely that people will simply ignore the topic. Topic titles need to be descriptive, not generic non-descriptive.
Your problem is that like many newbies you cant be bothered to do research, read and learn before messing around with your device.
You should boot into download mode and flash a stock rom. Preferably a older one that doesn't have knox. Then flash a stock rom(without knox) in recovery mode. All the info you need is here on forum.
Androidwizzard said:
Two options I see:
1. Try to restore your device using Kies3
2. Flash newest firmware (get it from sammobile) for your region using PC-Odin.
Click to expand...
Click to collapse
i forgot to tell that one of the things changed that my mobile lost the usb support in the normal mode as there is no change when i connect it to my pc except it charges only but it works in the download mode and when i reflash the stock rom v 4.3 the screen freezes after a few seconds of turning it on and i have to remove the battery .. do you think that flashing the 4.4.2 sthock rom will make a change ? as the solution of kies isn't possible due to the lack of usb support !
is there a way to format the sectors that the pation " param " which flashed by the sumsung star dous stock rom is in it and make that conflict to delete that ??
What was your last stock rom on your device before messing up?
I do absolutely not agree with those horror tales about knox, most people don't use and easily get rid of.
Do you remember your last bootloader? MK4 or above? Then don't take any risk by flashing 4.3 firmware and go straight ahead to 4.4.2.
It will be the safest way to get a working device again.
TheATHEiST said:
Putting "need help urgently please :'(" does not help you in any way, in fact it makes it more likely that people will simply ignore the topic. Topic titles need to be descriptive, not generic non-descriptive.
Your problem is that like many newbies you cant be bothered to do research, read and learn before messing around with your device.
You should boot into download mode and flash a stock rom. Preferably a older one that doesn't have knox. Then flash a stock rom(without knox) in recovery mode. All the info you need is here on forum.
Click to expand...
Click to collapse
i'm sorry for the way i show my problem as i'm a newbie already .. it that possible to downgrade my rom ? i will try install 4.1.2 rom then flasing the 4.4.2 one but when i flashed the 4.3 stock rom the screen freezes and nothing changed what do you think of that ? it there's a way to delete the " param " found in the sumsung galaxy star dous rom ? i think that made this conflict but try to explain to me why flashing an old rom then a new one without knox ? what will that do ?
Androidwizzard said:
What was your last stock rom on your device before messing up?
I do absolutely not agree with those horror tales about knox, most people don't use and easily get rid of.
Do you remember your last bootloader? MK4 or above? Then don't take any risk by flashing 4.3 firmware and go straight ahead to 4.4.2.
It will be the safest way to get a working device again.
Click to expand...
Click to collapse
i was using dn3 rom which has android version v 4.4.2 but i enter the recovery and restored the stock rom v 4.3 and it works with no problem and it was the last rom i use it when i flashed the star dous rom through the mobile odin in my mobile .. is there is a things i must do when i'm flashin the rom through the pc odin ? like check the repartion option or some thing else ?
my bootloader version is : n7100xxuena1 what that mean ?
omar youssef said:
i was using dn3 rom which has android version v 4.4.2 but i enter the recovery and restored the stock rom v 4.3 and it works with no problem and it was the last rom i use it when i flashed the star dous rom through the mobile odin in my mobile .. is there is a things i must do when i'm flashin the rom through the pc odin ? like check the repartion option or some thing else ?
my bootloader version is : n7100xxuena1 what that mean ?
Click to expand...
Click to collapse
So you can also try the NA1 firmware, but nothing beneath that. NA1 is a knox enabled BL, so whatever you flash successfully will have Knox in it.
DON'T TICK REPARTITION!
Androidwizzard said:
So you can also try the NA1 firmware, but nothing beneath that. NA1 is a knox enabled BL, so whatever you flash successfully will have Knox in it.
DON'T TICK REPARTITION!
Click to expand...
Click to collapse
what you mean of the NA1 firmware if you mean the 4.3 stock rom i flashed it with the pc odin and my mobile screen freezes as i told you and nothing changed .. give me obvious steps 1 2 3 to do it to solve this problem and if you can give me a suitable download links .. now you know all the issues with my mobile and thanks for your interst
omar youssef said:
what you mean of the NA1 firmware if you mean the 4.3 stock rom i flashed it with the pc odin and my mobile screen freezes as i told you and nothing changed .. give me obvious steps 1 2 3 to do it to solve this problem and if you can give me a suitable download links .. now you know all the issues with my mobile and thanks for your interst
Click to expand...
Click to collapse
1) Go to Sammobile
2) Find firmware for your region -> download
3) Find Odin 3.09 -> download and install
4) Start Odin 3.09
5) Plugin device -> see if Odin displays active com port
6) Go into download mode
7) Link firmware download in tab PDA/AP
8) Let Odin check md5
9) Press start button
10) Wait until display of com port in Odin turns green and says success.
All these steps could also be found with an easy Google search or in Youtube tutorials
Androidwizzard said:
1) Go to Sammobile
2) Find firmware for your region -> download
3) Find Odin 3.09 -> download and install
4) Start Odin 3.09
5) Plugin device -> see if Odin displays active com port
6) Go into download mode
7) Link firmware download in tab PDA/AP
8) Let Odin check md5
9) Press start button
10) Wait until display of com port in Odin turns green and says success.
All these steps could also be found with an easy Google search or in Youtube tutorials
Click to expand...
Click to collapse
Thanks for your work but I did all these steps but my mobile freezes and noying changed fir sorry .. I flashed the 4.4.2 kitkat stock rom which is the latest one !
omar youssef said:
Thanks for your work but I did all these steps but my mobile freezes and noying changed fir sorry .. I flashed the 4.4.2 kitkat stock rom which is the latest one !
Click to expand...
Click to collapse
OK, I see. Try a wipe from stock recovery, wipe all possible.
Another option: Kies!
I know, you said not recognized but you must get it to work. Uninstall all drivers from PC an re-install drivers until Kies can restore your device.
Very last option: Find a Samsung repair near to you.
Androidwizzard said:
OK, I see. Try a wipe from stock recovery, wipe all possible.
Another option: Kies!
I know, you said not recognized but you must get it to work. Uninstall all drivers from PC an re-install drivers until Kies can restore your device.
Very last option: Find a Samsung repair near to you.
Click to expand...
Click to collapse
Look I searched the internet find something I think it will be useful if we can use it successfully called n7100 rescue rom consists of 5 files in one zip file it is the fully original factory rom but unfortunately it's 4.1.2 jellybean so how can I flash this rom successfully ? Is it possible downgrade the bootloader first or what ?? Please help
omar youssef said:
Look I searched the internet find something I think it will be useful if we can use it successfully called n7100 rescue rom consists of 5 files in one zip file it is the fully original factory rom but unfortunately it's 4.1.2 jellybean so how can I flash this rom successfully ? Is it possible downgrade the bootloader first or what ?? Please help
Click to expand...
Click to collapse
As you mentioned you already have been on NA1 firmware and as it seems you have flashed latest 4.4.2 with "a kind of success" I find it hope- and useless to even try this rescue rom. Bootloader is the reason why you can't successfully flash. NO DOWNGRADE POSSIBLE.
Androidwizzard said:
As you mentioned you already have been on NA1 firmware and as it seems you have flashed latest 4.4.2 with "a kind of success" I find it hope- and useless to even try this rescue rom. Bootloader is the reason why you can't successfully flash. NO DOWNGRADE POSSIBLE.
Click to expand...
Click to collapse
Can you illustrate your words ? For kies it's unpossible to connect my mobile to any pc the drivers works perfectly for any similarphone the fault is in my mobile not the driver and for sumsung care it will be high cost as the warranty ended ! And I wipe every thing possible through the stock recovery but noyhing changed !
I am beginning to lose my patience cause you don't follow my advice or even don't consider that I am right.
Look into system on your PC if there is an unknown device.
Whenever hardware is connected to PC Windows starts to search for drivers.
It doesn't matter that other devices are recognized correctly.
Wipe all Samsung drivers and re-install. Even re-install Kies too.
Start Kies and try restoration, maybe it will fail, but try. AND with current drivers you are supposed to fail.
At last: Try to find a friend with knowledge who can help you at your home or his.
Related
i tried to upgrade my s3 i accidentally falshed with correpted file('i renamed the file .mb5 to .tar) it stuck and showing that needed to connect kies
.. and kies not detecting my device and it wont boot into recovery mode but after search i rooted again through cf auto root and then it can enter into recovery mode is it bricked/not what happend to my device currently it can enter into both recovery &download mode ......
pls help me with this
ghjsdf9 said:
i tried to upgrade my s3 i accidentally falshed with correpted file('i renamed the file .mb5 to .tar) it stuck and showing that needed to connect kies
.. and kies not detecting my device and it wont boot into recovery mode but after search i rooted again through cf auto root and then it can enter into recovery mode is it bricked/not what happend to my device currently it can enter into both recovery &download mode ......
pls help me with this
Click to expand...
Click to collapse
Welcome to the forum! Your phone's hardly bricked if you can get to download and recovery modes. Flashing the correct (stock) firmware should get you back to working conditions. What Android version were you on prior to it being stuck and what were you trying to upgrade to?
Larry2999 said:
Welcome to the forum! Your phone's hardly bricked if you can get to download and recovery modes. Flashing the correct (stock) firmware should get you back to working conditions. What Android version were you on prior to it being stuck and what were you trying to upgrade to?
Click to expand...
Click to collapse
THANKS FOR WELCOME PARTY:
and for the rly tooo.
i can get into both download mode as well as recovery mode ..... i'm not clear with my phones model-in odin mode it showing "PRODUCT NAME:-SGH-I747M" on starting it is running 4.1.2 (zsemc1) version i am not clear with baseband etc.
and i'm not clear with supported varient versions when i flashed with different version in odin mode it showing differnt causes for different version
ex: "unsupported dev type","secure check fail sb12",securechech fail aboot" for three different versions
ghjsdf9 said:
THANKS FOR WELCOME PARTY:
and for the rly tooo.
i can get into both download mode as well as recovery mode ..... i'm not clear with my phones model-in odin mode it showing "PRODUCT NAME:-SGH-I747M" on starting it is running 4.1.2 (zsemc1) version i am not clear with baseband etc.
and i'm not clear with supported varient versions when i flashed with different version in odin mode it showing differnt causes for different version
ex: "unsupported dev type","secure check fail sb12",securechech fail aboot" for three different versions
Click to expand...
Click to collapse
i747M is for the Canadian and Mexican variants. If you were on stock 4.1.2, you should be able to Odin back to stock 4.1.1 or upgrade to 4.3 via custom recovery. You can go to the thread below to check the correct stock image for your phone based on carrier. Make sure you use the correct image as flashing the wrong version could hard brick your phone. Download to your PC and then flash. If you select the 4.3 version, you would need to flash custom recovery to your phone via Odin, save the file to a (micro) SD card and then flash via custom recovery.
http://forum.xda-developers.com/showthread.php?t=1739426
Let me know if this works for you.
Larry2999 said:
i747M is for the Canadian and Mexican variants. If you were on stock 4.1.2, you should be able to Odin back to stock 4.1.1 or upgrade to 4.3 via custom recovery. You can go to the thread below to check the correct stock image for your phone based on carrier. Make sure you use the correct image as flashing the wrong version could hard brick your phone. Download to your PC and then flash. If you select the 4.3 version, you would need to flash custom recovery to your phone via Odin, save the file to a (micro) SD card and then flash via custom recovery.
http://forum.xda-developers.com/showthread.php?t=1739426
Let me know if this works for you.
Click to expand...
Click to collapse
i'm Asian it worked for local networks before bricked so i'm not clear with choosing in versions... ["help me with it"]
ghjsdf9 said:
i'm Asian it worked for local networks before bricked so i'm not clear with choosing in versions... ["help me with it"]
Click to expand...
Click to collapse
If we are going to flash a stock ROM, we would need to flash the correct version as there is risk of a worse brick if we flash the wrong one. When the phone was working normally, the old network would probably be showing during booting. If you got it from abroad, please check if you can get the information from the previous owner. If there is no way of telling the correct firmware, then you can flash custom recovery to the phone and try flashing a custom ROM via recovery. It's always tidier flashing a custom ROM to a device functioning normally but, unless we can be sure of the correct stock firmware to flash, your options may be limited.
Larry2999 said:
If we are going to flash a stock ROM, we would need to flash the correct version as there is risk of a worse brick if we flash the wrong one. When the phone was working normally, the old network would probably be showing during booting. If you got it from abroad, please check if you can get the information from the previous owner. If there is no way of telling the correct firmware, then you can flash custom recovery to the phone and try flashing a custom ROM via recovery. It's always tidier flashing a custom ROM to a device functioning normally but, unless we can be sure of the correct stock firmware to flash, your options may be limited.
Click to expand...
Click to collapse
and finally i found the correct version and when tried to flash through odin i came across this problem
it stuck at "initialization..." [more than hour..] help pls......
ghjsdf9 said:
and finally i found the correct version and when tried to flash through odin i came across this problem
it stuck at "initialization..." [more than hour..] help pls......
Click to expand...
Click to collapse
Sounds like a partition problem. Please let me know the firmware version you are trying to flash.
Larry2999 said:
Sounds like a partition problem. Please let me know the firmware version you are trying to flash.
Click to expand...
Click to collapse
it's version 4.3(I747MVLUEND2_I747MOYBEND2_SPC) at sammobiles.com............
and once "i tried with pit file by marking re partition" will this effect ??????????????
ghjsdf9 said:
it's version 4.3(I747MVLUEND2_I747MOYBEND2_SPC) at sammobiles.com............
and once "i tried with pit file by marking re partition" will this effect ??????????????
Click to expand...
Click to collapse
I've seen this particular problem reported several times and it's always been a problem with the pit file. Flashing a complete stock system should fix all partition problems though. If the stock file you are using is an Odin flashable file, you may try using Odin 3.09. Otherwise, I'd suggest you find a recovery flashable image and flash via (custom) recovery.
Please Help Really Urgent, My dads gonna ... *insert worst here* ... me :crying::crying::crying:
Ok i decided to upgrade his phone gt-n7100 to kitkat 4.4, as a surprise .. but. :crying:
as per dr ketans instructions,
installed odin.
installed cwm.
downloaded N7100_ND3_DrKetan_Custom_ROM_V7_3. installed via cwm.
rebooted. worked fine.
But no net, and phone would not show charge icon so installed as recommended in the guide the bootloader N7100_ND from d-h.st/TQq
using odin (installed as bootloader)
rebooted ... but now phone stuck on intial screen. :crying: :crying: :crying:
CANNOT go into cwm
tried flashing cwm again. no avail
tried another rom N7100XXDMG1_N7100ODDDMG1_INU_Prerooted. it fails to flash
tried kies, to update rom, it says cannot update this device
cannot find stock image (hotfile is down), nor am sure if it will update.
please help, where did i went wrong. followed everything to the instructions. spend so long trying to fix it. finally posting here in hope of help
Please help. Thankss :crying:
ZainNaiz said:
Please Help Really Urgent, My dads gonna ... *insert worst here* ... me :crying::crying::crying:
Ok i decided to upgrade his phone gt-n7100 to kitkat 4.4, as a surprise .. but. :crying:
as per dr ketans instructions,
installed odin.
installed cwm.
downloaded N7100_ND3_DrKetan_Custom_ROM_V7_3. installed via cwm.
rebooted. worked fine.
But no net, and phone would not show charge icon so installed as recommended in the guide the bootloader N7100_ND from d-h.st/TQq
using odin (installed as bootloader)
rebooted ... but now phone stuck on intial screen. :crying: :crying: :crying:
CANNOT go into cwm
tried flashing cwm again. no avail
tried another rom N7100XXDMG1_N7100ODDDMG1_INU_Prerooted. it fails to flash
tried kies, to update rom, it says cannot update this device
cannot find stock image (hotfile is down), nor am sure if it will update.
please help, where did i went wrong. followed everything to the instructions. spend so long trying to fix it. finally posting here in hope of help
Please help. Thankss :crying:
Click to expand...
Click to collapse
1. Reboot to recovery - Power button+Home button+volume up then factory reset if this don't work:
2. Download a 4.4.2 rom from Sammobile and flash through Odin and then repeat the procedures to install Dr Keaton Rom.
Hope you can solve the problem.
ZainNaiz said:
Please Help Really Urgent, My dads gonna ... *insert worst here* ... me :crying::crying::crying:
Ok i decided to upgrade his phone gt-n7100 to kitkat 4.4, as a surprise .. but. :crying:
as per dr ketans instructions,
installed odin.
installed cwm.
downloaded N7100_ND3_DrKetan_Custom_ROM_V7_3. installed via cwm.
rebooted. worked fine.
But no net, and phone would not show charge icon so installed as recommended in the guide the bootloader N7100_ND from d-h.st/TQq
using odin (installed as bootloader)
rebooted ... but now phone stuck on intial screen. :crying: :crying: :crying:
CANNOT go into cwm
tried flashing cwm again. no avail
tried another rom N7100XXDMG1_N7100ODDDMG1_INU_Prerooted. it fails to flash
tried kies, to update rom, it says cannot update this device
cannot find stock image (hotfile is down), nor am sure if it will update.
please help, where did i went wrong. followed everything to the instructions. spend so long trying to fix it. finally posting here in hope of help
Please help. Thankss :crying:
Click to expand...
Click to collapse
You did a lot of steps that shouldn't have been done in the first place so instead of trying more things that wouldn't work just flash the official stock NE1 firmware from https://mega.co.nz/#!2QRmCbyb!YkWs927BfvYxqL-vJiQHXkshqG3UtqHm4XIDbgLsEK0 ,extract the zip file you'll get a tar file ,put your phone into download mode , (uninstall kies) only run odin, connect the phone to computer,make sure the ID:COM turns blue then check mark AP/PDA tab on odin and select the downloaded firmware.Dont touch anything else hit start and let odin do it's magic once your dad's phone successfully boots and you get network etc etc.then ask me i'll tell how to root the stock firmware and run custom ROM.Good luck.
singhpratik87 said:
You did a lot of steps that shouldn't have been done in the first place so instead of trying more things that wouldn't work just flash the official stock NE1 firmware from https://mega.co.nz/#!2QRmCbyb!YkWs927BfvYxqL-vJiQHXkshqG3UtqHm4XIDbgLsEK0 ,extract the zip file you'll get a tar file ,put your phone into download mode , (uninstall kies) only run odin, connect the phone to computer,make sure the ID:COM turns blue then check mark AP/PDA tab on odin and select the downloaded firmware.Dont touch anything else hit start and let odin do it's magic once your dad's phone successfully boots and you get network etc etc.then ask me i'll tell how to root the stock firmware and run custom ROM.Good luck.
Click to expand...
Click to collapse
Thankyou Sooooooo verrrrrrrrrrrrrrrrrrrrrry muchhhhhhhhhhh :laugh: Bless You.
Thanks For the detailed step by step with the link AND working reply. Thankyou. This is the first rom that worked, i even tried another and thought phone is dead and me.
Please let me know how to kitkat it now.
Should i follow same steps.
i.e install cwm
then should i first install wifi driver by dr ketan, or boot loader or the rom ? from here forum.xda-developers.com/showthread.php?t=2472270
Thanks again :laugh:
very odd.
the phone after flashing, is now booting into previous rom i.e 4.4 Kitkat ???
is my phone screwed? using odin 3.04
shouldn't it be booting into stock now as you said after the flashing
thanks
ZainNaiz said:
very odd.
the phone after flashing, is now booting into previous rom i.e 4.4 Kitkat ???
is my phone screwed? using odin 3.04
shouldn't it be booting into stock now as you said after the flashing
thanks
Click to expand...
Click to collapse
That's odd,go perform a factory reset and see what happens.Which one was your previous ROM?
Edit: After factory reset if it still boots in your old ROM, reflash the stock rom i gave you and then tell me what happens.
Use odin v3.09 at least ill give you the link hold on
http://odindownload.com/
Are you sure it's the OLD ROM and not stock rom?Check in settigns>>about device>>and tell what you see under build # cause the link i gave you is of Kitkat ROM too NE1 firmware
singhpratik87 said:
That's odd,go perform a factory reset and see what happens.Which one was your previous ROM?
Edit: After factory reset if it still boots in your old ROM, reflash the stock rom i gave you and then tell me what happens.
Use odin v3.09 at least ill give you the link hold on
Are you sure it's the OLD ROM and not stock rom?Check in settigns>>about device>>and tell what you see under build # cause the link i gave you is of Kitkat ROM too NE1 firmware
Click to expand...
Click to collapse
Thankyou. Downloaded Odin 3.09. Reflashed it. Its Stock Now KOT49H.N7100XXUFNE1
Please tell me should i now directly install dr ketans rom without boot loader and wifi? Thanks
ZainNaiz said:
Thankyou. Downloaded Odin 3.09. Reflashed it. Its Stock Now KOT49H.N7100XXUFNE1
Please tell me should i now directly install dr ketans rom without boot loader and wifi? Thanks
Click to expand...
Click to collapse
Yes you dont need bootloader nor wifi fix anymore since flashing official stock 4.4.2 you are on the newest boootloader.Now you need to root your phone.So you need philz touch 6.41.tar file and supersu v 1.97.
Philz tar file
SuperSu v1.97
Refer to this post of mine in another thread How to root
The above posts show how to flash recovery in odin and do exactly what it says in the image UNCHECK AUTO REBOOT IN ODIN once its done flashing and says pass phone wont be turned off so remove the phone from laptop and pull the battery out and follow my instructions there.
Once you boot your phone again after flashing superSU it will ask you if you want to disable KNOX select yes (knox will be triggered to 0x1 that means warranty will be void)
Also thank the person when you visit his thread since he made the thread and i just helped him a bit.his id is smeet.somaiya
singhpratik87 said:
Yes you dont need bootloader nor wifi fix anymore since flashing official stock 4.4.2 you are on the newest boootloader.Now you need to root your phone.So you need philz touch 6.41.tar file and supersu v 1.97.
Philz tar file
SuperSu v1.97
Refer to this post of mine in another thread How to root
The above posts show how to flash recovery in odin and do exactly what it says in the image UNCHECK AUTO REBOOT IN ODIN once its done flashing and says pass phone wont be turned off so remove the phone from laptop and pull the battery out and follow my instructions there.
Once you boot your phone again after flashing superSU it will ask you if you want to disable KNOX select yes (knox will be triggered to 0x1 that means warranty will be void)
Also thank the person when you visit his thread since he made the thread and i just helped him a bit.his id is smeet.somaiya
Click to expand...
Click to collapse
Thanks. Thanked the person. And Your Post.
Just installed cwm and super su. thanks again.
Btw the link to download odin seems to be spamware, insted of downloading odin, i got a program 104kb giving lots of options, and at the end still did not install odin. Just for info. (i already had odin later version, and used that before, but wanted to check if a newer one is available, so header over there).
Going to install dr ketans custom rom. fingers crossed.
Thanks for all the help, will update, how it goes.
It never asked me to disable knox...
Would it be problematic if knox is not disabled ? as i wanted to use knox.
...
Finished flashing dr ketans rom, and it booted just fine, albiet slow compared to the stock rom.
Thankyou Pratik for all the help with detail and correctness.
Bless You.
ZainNaiz said:
It never asked me to disable knox...
Would it be problematic if knox is not disabled ? as i wanted to use knox.
...
Finished flashing dr ketans rom, and it booted just fine, albiet slow compared to the stock rom.
Thankyou Pratik for all the help with detail and correctness.
Bless You.
Click to expand...
Click to collapse
Ya i think all the custom ROM for our note 2 are heavily modded the latest ones that's why sometimes just to feel the smoothness i flash back stock ROM and when i get bored of them i flash one of the custom roms.Glad to know you were able to successfully flash the rom of your choice.Enjoy.
Help
Hello everybody, I have a problem with my galaxy note 2 N7100.
The problem is the following:
One day I was using my phone normally, and all of a sudden the screen turned off and the phone never turned on again, (if you press the power button the screen turns a little gray, but you must be in a dark place to perceive it)
I can't access download or any other mode, or at least I can't detect if the phone has accessed it, because the screen just turns a little gray and does nothing else.
I have the drivers and have the official ROM for my region, ODIN installed, ADB, and other flashing tools and recovery files. But it has been long time since the last time I flashed something or did anything to the device and would appreciate a little help.
Can anyone here help me to solve this issue or knows what is happening with my phone?
Thank you for any kind of help you can give me
Update: I "think" I got into download mode blindly, just press the home+power+down vol buttons, then pressed up vol and connected the phone to the usb, surprisingly the computer made the usb sound that indicated me that the connection was recognized, Odin showed the ID:COM blue, so I proceeded to load the original rom and flash it, it took around 3.5 minutes and finally it showed succesful. But when I pressed the power button to turn on the phone, the screen still grey and doesn't start. I'm starting to think its a screen problem. I already purchased a new screen so I'm going to tell a frend to install it for me.
I'll be in touch
By mistake I upgrade my samsung galaxy tab 3 to kitkat 4.4.2, I was wondering if its possible to downgrade back down to JB 4.2.2 and if so can someone post a link?
Same mistake
Jrobles026 said:
By mistake I upgrade my samsung galaxy tab 3 to kitkat 4.4.2, I was wondering if its possible to downgrade back down to JB 4.2.2 and if so can someone post a link?
Click to expand...
Click to collapse
Any help on this please
If I go to Settings/Backup and Restore and do a Factory data reset Will this take the device back to JB 4.4.2
Thanks.
epson001 said:
Any help on this please
Click to expand...
Click to collapse
Well, here is a 4.2.2 ROM: [ROM] GalaTab3 MH2 JB4.2.2 DeOdexed Rooted BusyBox
Tromatic said:
Well, here is a 4.2.2 ROM: [ROM] GalaTab3 MH2 JB4.2.2 DeOdexed Rooted BusyBox
Click to expand...
Click to collapse
Thanks for the reply and link Tromatic. I have downloaded the Rom but was wondering if a factory reset would work as I have never flashed my device?
Cheers
Factory reset will not work. You will stay in kk4.4.2. And there is some situation with the boot loaders that are locked on kitkat.... not sure if you can roll back to jb.
Sent from my SM-T310 using Tapatalk
Lakland said:
Factory reset will not work. You will stay in kk4.4.2. And there is some situation with the boot loaders that are locked on kitkat.... not sure if you can roll back to jb.
Sent from my SM-T310 using Tapatalk
Click to expand...
Click to collapse
Thanks for the info Lakland. I'm not confident about flashing my device myself anyone round Leeds/Bradford who could help me with this
Thanks again
Please help me!!
Hi guys. When I try back to Jelly Bean 4.2.2 odin is failing. I use XEF 4.4.2 for France kitkat. I want to go back JB. I want official rom.
Sorry for my bad English. Please help me.
Thanks. My device = SM-T310
emreturan_ said:
Hi guys. When I try back to Jelly Bean 4.2.2 odin is failing. I use XEF 4.4.2 for France kitkat. I want to go back JB. I want official rom.
Sorry for my bad English. Please help me.
Thanks. My device = SM-T310
Click to expand...
Click to collapse
If I understand you correctly, your Galaxy Tab 8.0 is currently on 4.4.2 - either NE9 or NG1. You tried to use ODIN and flash the MK1 (4.2.2), but it failed.
Firstly, I haven't downgraded modem or the whole firmware myself on my Galaxy Tab 3, but I did it for my Galaxy S4 phone. It requires that you flash it twice. Here is what I would do.
1. Go back to SamMobile, and download the Kitkat firmware that you currently have (NE9 or NG1). Use ODIN to flash it and make sure that ODIN is working. This serves as your safety net; i.e., whenever things go wrong, you know you can at least bring your tablet back to a working state.
2. Now try to downgrade just the modem (not the entire firmware).
Read Post #19 on this page. This is what you need to do for "flashing the modem twice with ODIN".
http://forum.xda-developers.com/galaxy-s4-att/general/modem-4-4-2-i337mumufne3-t2815999/page2
To get your own modem.bin file, you need to extract it from the md5 file:
- find the MK1 md5 file you downloaded from SamMobile earlier,
- unzip it, and you will see the modem.bin file
3. Finally, use ODIN to flash the entire firmware (MK1 md5).
Proceed at your own risk.
Good luck.
Failed Againnnn
I'm tried. But I failed again. Sorry I'm Turkish. I'm not understand you. Do you know turkish?
If you know turkish, please reply this message. Help me.
Sorry for my bad English
Thanks, I'm Emre
Try this:
GalaxyTab3 Toolkit v1.1
Get the TWRP recovery installed on your GTab, then flash the GalaTab ROM. It's not hard, it just seems like it from some of the failures and horror stories.
I'm no expert, but I'll try to describe what to do. NOTE: There may be other ways to do it, but this is what I did.
Do you have a recovery (TWRP or CWM) on your tab? If not, that's the first thing you need to do. You are going to need to install Kies, Odin and then the Toolkit.
Note: TWRP works with the GalaTab ROM, and it's fairly simple to use. Install TWRP so we are all on the same page.
Lots of stuff, but the goal is to get a recovery on your Tab. Once all this is installed, start the Toolkit and connect your Tab to the PC. The Toolkit has great instructions, so follow those.
Once you have done all of that and you have a working recovery, get the GalaTab ROM onto your Tab and flash away.
Get a recovery onto your Tab first, and the rest is easy. Try just getting a recovery working and post your results and we'll go from there.
Note: This is for the SM-T310 only!
I'm flash galaxy tab 3 4.2.2 with Philz Touch. But turkish language is not available. My device was out of warranty. Because I'm flash france rom. Please help me. Please speak turkish.
Lütfen türkçe konuş. Anlaşmamız lazım.
Sorry, Özür dilerim.
emreturan_ said:
I'm flash galaxy tab 3 4.2.2 with Philz Touch. But turkish language is not available. My device was out of warranty. Because I'm flash france rom. Please help me. Please speak turkish.
Lütfen türkçe konuş. Anlaşmamız lazım.
Sorry, Özür dilerim.
Click to expand...
Click to collapse
Sorry, I don't speak French or Turkish!
I found this on the Samsung ROM page:
Galaxy Tab 3 8.0 SM-T310 TUR T310XWUAMG3 Android 4.2.2 23.07.2013 1174257 Unlock Download File
I'm assuming that will be in Turkish from the start. It SHOULD be the ROM that would come stock on a GTab 3 purchased in Turkey.
Is it a language barrier causing trouble flashing your tablet? Perhaps we could try screen caps to help. Wish I could be more helpful.
emreturan_ said:
I'm flash galaxy tab 3 4.2.2 with Philz Touch. But turkish language is not available. My device was out of warranty. Because I'm flash france rom. Please help me. Please speak turkish.
Lütfen türkçe konuş. Anlaşmamız lazım.
Sorry, Özür dilerim.
Click to expand...
Click to collapse
I don't know Turkish either. You can try translating using Google. Copy and paste the following text at the following website:
Ben de Türkçe bilmiyorum. Google'ı kullanarak çeviri deneyebilirsiniz. Kopyalama ve aşağıdaki web sitesinde aşağıdaki metni yapıştırın:
https://www.google.ca/#q=translate+english+to+turkish
I agree with Tromatic. If you are still having problems, forget custom ROM or recovery, just go back to factory using ODIN. But...
Since you already have a French ROM with 4.4.2, you need to use a Turkish ROM in 4.4.2. Unfortunately, the only Turkish ROM available on SammMobile is 4.2.2 ROM (which Tromatic kindly provided a link above). It is unclear whether we can flash a ROM with an older version using ODIN. So you need to try it and find out.
Flashing of factory ROM is best done using ODIN. To begin, you need to make sure that ODIN is working.
You need a Windows computer, with the proper Samsung driver installed. Also search and download Odin 3.09, and have it ready to run.
The Turkish 4.2.2 ROM is linked in the post above by Tromatic. Download that.
To use ODIN, follow this guide:
http://galaxys4root.com/galaxy-s4-tutorials/how-to-unroot-galaxy-s4-and-remove-root-completely/
Step 1. Power off your tablet and hold down Volume Down, Center Home, and Power button together for about 5 seconds.
Step 2. When you see the warning screen, hit Volume Up button to enter ODIN Download mode.
Step 3. Connect a micro-USB cable from your tablet to your computer.
Step 4. Download and run ODIN 3.09 program.
Step 5. Unzip the stock firmware, you should find a file ending in “tar.md5″. That is the stock firmware you will flash using ODIN.
Step 6. DON’T TOUCH ANYTHING ELSE but hit the PDA button, select the stock firmware “tar.md5″ file and hit “Start” button. That’s it. This should take around 5-10 minutes. If you get stuck right after hitting “Start” button, try another USB port and turn off Kies in Task Manager.
Step 7. When done successfully, you will see “PASS!” and your tablet will reboot.
If for some reason, you get “FAIL!” during the ODIN flashing process, simply reboot your tablet into ODIN download mode and try again. Also, if you see some type of “Firmware error” during boot, just try running ODIN in that mode, that’s same as ODIN download mode.
Step 8. Once rebooted, your tablet should be fully back to stock firmware.
Step 9. If for some reason, your tablet doesn’t boot up or you want to erase EVERYTHING on your internal storage and the phone for returning for warranty, you can do a factory reset using stock recovery.
Power off your phone (or pull battery) and hold down Volume Up, Center Home, and Power buttons together.
Step 10. Keep holding down Volume Up and Center Home buttons but let go of Power button.
Step 11. Once in stock recovery, choose “wipe data/factory reset”.
Step 12. Choose “delete all user data”. WARNING! This will ERASE EVERYTHING ON YOUR INTERNAL STORAGE!
Step 13. Once done, reboot system.
Step 14. Once rebooted, you should find your Galaxy S4 completely back to Day 1 you got the phone, congrats!
If you are not successful in flashing the 4.2.2 Turkish ROM, go back and flash the French 4.4.2 ROM.
You can download the French 4.4.2 ROM from here:
http://samsung-updates.com/details/30982/Galaxy_Tab_3_8.0/SM-T310/XEF/T310XXUBNG1.html
Repeat the above steps, but use the different ROM file.
Dear all,
Well I dont know where to start. But here is what happened with my N7100 Note 2.
I was on the latest 4.4.2, the phone restarted suddenly one day and it just dont boot stuck at samsung logo,
flashed the 4.4.2 stock from sammobile. and it worked fine everything was perfect for a week, till it happened again
flashed the same rom. and here is where the trouble begins.
The IMEI changed to generic 00499XXX.., Serial No: 000000
i managed to downgrade to 4.1.2 with mobile odin, flashed a lot of stocks and customs as well. And after a very hard work for a week i manage to get back my IMEI and serial number back, now I backed up my EFS learned my lesson
Now i flashed the stock rom 4.1.1, phone is unlocked. cant make calls, or sms or data internet.
Now I have service: out of service, Bluetooth address: unavailable (while its in the efs folder the mac is in the file), Device status modified, And when I connect it to USB it wont recognize the phone until I have to dial *#7284# and change USB from modem to PDA, then save and reset. (EVERYTIME) I need a permanent fix as well for that.
Please I need help with those as i cant make my phone work.
Thanks and regards,
Mohamed Selim.
First and most important:
If you ever were on stock 4.4.x you can't downgrade to 4.1.x because of knoxed bootloader.
What you did with mobile odin was no real downgrade cause your bootloader wasn't touched.
Don't try to flash firmware beyond your current bootloader version.
Install Samsung Phone Info app from play store and look for actual bootloader version.
Androidwizzard said:
First and most important:
If you ever were on stock 4.4.x you can't downgrade to 4.1.x because of knoxed bootloader.
What you did with mobile odin was no real downgrade cause your bootloader wasn't touched.
Don't try to flash firmware beyond your current bootloader version.
Install Samsung Phone Info app from play store and look for actual bootloader version.
Click to expand...
Click to collapse
Well It actually did downgrade to 4.1.2 with Mobile odin and I checked the version and Baseband and everything it was the 4.1.2
Now I am on 4.1.1 stock. rooted and trying to figure out what to do now
onix17_5 said:
Well It actually did downgrade to 4.1.2 with Mobile odin and I checked the version and Baseband and everything it was the 4.1.2
Now I am on 4.1.1 stock. rooted and trying to figure out what to do now
Click to expand...
Click to collapse
As I said before: YOU DID NOT DOWNGRADE firmware to 4.1.2 with Mobile Odin, check with Info app from Samsung:
You will find bootloader between *ND3 and *NI1 and all are 4.4.2 KitKat
So, whatever firmware you try to flash under 4.4.2 is supposed to fail.
Androidwizzard said:
As I said before: YOU DID NOT DOWNGRADE firmware to 4.1.2 with Mobile Odin, check with Info app from Samsung:
You will find bootloader between *ND3 and *NI1 and all are 4.4.2 KitKat
So, whatever firmware you try to flash under 4.4.2 is supposed to fail.
Click to expand...
Click to collapse
I am not trying to argue here, And yes I do agree with you, it failed with i tried to downgrade with windows odin all the time, but acutally never failed with mobile-odin pro latest version. you dont have to believe me, I wont lie to you. I just need a solution for the problem im having now.
Thanks.
onix17_5 said:
I am not trying to argue here, And yes I do agree with you, it failed with i tried to downgrade with windows odin all the time, but acutally never failed with mobile-odin pro latest version. you dont have to believe me, I wont lie to you. I just need a solution for the problem im having now.
Thanks.
Click to expand...
Click to collapse
Mobile Odin does everything but doesn't flash bootloader so it is like flashing a custom rom which also doesn't contain bootloader.
PC Odin flashes complete firmware, so this is the only way to really up- or downgrade. Hope you understand the difference.
The only solution I see for you is to concentrate on 4.4.2 equal or up your actual bootloader version.
Androidwizzard said:
Mobile Odin does everything but doesn't flash bootloader so it is like flashing a custom rom which also doesn't contain bootloader.
PC Odin flashes complete firmware, so this is the only way to really up- or downgrade. Hope you understand the difference.
The only solution I see for you is to concentrate on 4.4.2 equal or up your actual bootloader version.
Click to expand...
Click to collapse
I do Understand the difference, and thanks for explaining more.
But I attached About my device
But any way beside all this points, I need to fix all the problems I am having either im on 4.1.1 or 4.4.2
Thanks.
onix17_5 said:
I do Understand the difference, and thanks for explaining more.
But I attached About my device
But any way beside all this points, I need to fix all the problems I am having either im on 4.1.1 or 4.4.2
Thanks.
Click to expand...
Click to collapse
I really want to help you out and I assure you that I know what I am talking about (take a look into my signature with stock roms and bootloaders).
There is indeed no solution on 4.1.1 and the screenshot doesn't show bootloader version. To believe what I say try to find out what BL version you are on. If it shows XXUFND3 up to XXUFNI1 you have the proof.
Androidwizzard said:
I really want to help you out and I assure you that I know what I am talking about (take a look into my signature with stock roms and bootloaders).
There is indeed no solution on 4.1.1 and the screenshot doesn't show bootloader version. To believe what I say try to find out what BL version you are on. If it shows XXUFND3 up to XXUFNI1 you have the proof.
Click to expand...
Click to collapse
kay my Bootloader is: N7100XXUFND4. Android Version: 4.1.1, you are right, I kinda understand what you were talking about now.
So now im all ears, Please help me solve my problems.
onix17_5 said:
Okay my Bootloader is: N7100XXUFND4. Android Version: 4.1.1
Well now how can I solve my problems, All ears
Click to expand...
Click to collapse
XXUFND3 was the first KitKat firmware for N7100 and yours was the second.
Three options:
1) Flash firmware using PC Odin at least ND4, maybe better NE1 or up
2) Flash through recovery any stock KitKat custom rom provided by wesamothman, cosmyndemeter or me
3) Flash through recovery any KitKat custom rom you like from development section here
4.3 custom roms may work also, but not 100% sure.
Beyond 4.3 I wouldn't recommend.
Androidwizzard said:
XXUFND3 was the first KitKat firmware for N7100 and yours was the second.
Three options:
1) Flash firmware using PC Odin at least ND4, maybe better NE1 or up
2) Flash through recovery any stock KitKat custom rom provided by wesamothman, cosmyndemeter or me
3) Flash through recovery any KitKat custom rom you like from development section here
4.3 custom roms may work also, but not 100% sure.
Beyond 4.3 I wouldn't recommend.
Click to expand...
Click to collapse
Okay, I will flash a stock Kitkat custom rom provided by you, Can you please require one for me. And I will flash it through recovery now.
onix17_5 said:
Okay, I will flash a stock Kitkat custom rom provided by you, Can you please require one for me. And I will flash it through recovery now.
Click to expand...
Click to collapse
Best and fastest one is XXUFNI1, NH2 and NG3 aren't bad either.
Do a clean installation (factory reset) and after setup device go back into recovery to flash SuperSu.zip.:highfive:
Androidwizzard said:
Best and fastest one is XXUFNI1, NH2 and NG3 aren't bad either.
Do a clean installation (factory reset) and after setup device go back into recovery to flash SuperSu.zip.:highfive:
Click to expand...
Click to collapse
Okay I staterd the download for XDA_XXUFNI1.zip and the BL NH2.
I think I got it, no BL just the XDA_XXUFNI1.zip and clean install it
Okay will be back when im done
onix17_5 said:
Okay I staterd the download for XDA_XXUFNI1.zip and the BL NH2.
should I flash the NH2 with odin after the rom? , or just the Rom without the NH2?
Click to expand...
Click to collapse
No need to flash BL cause you already have KitKat BL
Androidwizzard said:
XXUFND3 was the first KitKat firmware for N7100 and yours was the second.
Three options:
1) Flash firmware using PC Odin at least ND4, maybe better NE1 or up
2) Flash through recovery any stock KitKat custom rom provided by wesamothman, cosmyndemeter or me
3) Flash through recovery any KitKat custom rom you like from development section here
4.3 custom roms may work also, but not 100% sure.
Beyond 4.3 I wouldn't recommend.
Click to expand...
Click to collapse
Okay im done with this part flashed and step up, and installed superU.
So what next
onix17_5 said:
Okay im done with this part flashed and step up, and installed superU.
So what next
Click to expand...
Click to collapse
After reboot everything should be fine: Stable, rooted, fast, right?
Androidwizzard said:
After reboot everything should be fine: Stable, rooted, fast, right?
Click to expand...
Click to collapse
Yes rooted fast everything is stable, but all the problems I said in the first post still there
onix17_5 said:
Yes rooted fast everything is stable, but all the problems I said in the first post still there
Click to expand...
Click to collapse
You mean really everything
out of service,
Bluetooth address: unavailable
Device status modified -> that's ok
USB doesn't recognize the phone
Androidwizzard said:
You mean really everything
out of service,
Bluetooth address: unavailable
Device status modified -> that's ok
USB doesn't recognize the phone
Click to expand...
Click to collapse
Yes still out of service
Bluetooth address: unavaliable
USB doesnt recognize the phone until i have to do *#7284# and change USB to PDA, this its okay but once i restarted the phone I have to do it again save and reset.
onix17_5 said:
Yes still out of service
Bluetooth address: unavaliable
USB doesnt recognize the phone until i have to do *#7284# and change USB to PDA, this its okay but once i restarted the phone I have to do it again save and reset.
Click to expand...
Click to collapse
Ok, last one is driver related to your PC (Mac or Windows?), are you running Kies?
For BT I found this APP
For the first issue I think about IMEI lost, pls check
I recently rooted my I9195 successfully. i then flashed a custom kernel i found here on the forum (kernel v1 or sth like that) then my phone wouldn go past the boot white logo screen. i then tried flashing other kernels but they were apparently wrong as some features of my phone didnt work. i finally found the right firmware for my phone and tried to flash it with odin but it failed and now my phone only shows this message where it says that the firmware update failed and i have to use kies in recovery mode.
so i use kies and try the install firmware thing that asks you to put in your model and serial number. i do that and it says the device doesnt support initialisation. tried on another computer and it said that serial number was invalid.. i was very careful when typing it etc.
help.. what do i do?
btw last firmware i had was 4.4.2
Silvershot said:
I recently rooted my I9195 successfully. i then flashed a custom kernel i found here on the forum (kernel v1 or sth like that) then my phone wouldn go past the boot white logo screen. i then tried flashing other kernels but they were apparently wrong as some features of my phone didnt work. i finally found the right firmware for my phone and tried to flash it with odin but it failed and now my phone only shows this message where it says that the firmware update failed and i have to use kies in recovery mode.
so i use kies and try the install firmware thing that asks you to put in your model and serial number. i do that and it says the device doesnt support initialisation. tried on another computer and it said that serial number was invalid.. i was very careful when typing it etc.
help.. what do i do?
btw last firmwar i had was 4.4.2
Click to expand...
Click to collapse
I think you should put original back and start over and read forum more howto.
You use ODIN to flash custom rom, why? ODIN is for original rom. With custom rom need use TWRP or other recovery boot.
S3miniFin said:
I think you should put original back and start over and read forum more howto.
You use ODIN to flash custom rom, why? ODIN is for original rom. With custom rom need use TWRP or other recovery boot.
Click to expand...
Click to collapse
I used ODIN for past phones to flash custom kernels and it worked fine. i said i flashed someone that isnt supposed to be supported. i have no idea. i am not an expert and i thought someone can provide with a fast fix since there will surely be someone to have experienced this issue.
anyone else?
bump! please help.. i dont have another phone and I need to get this fixed asap!
You don't need root phone before new kernel or custom rom. And i believe you use wrong files for that and now phone wont boot.
Start over with original ROM. With that you can test is your phone ok. Then use ODIN for recovery kernel and custom rom. Also check this:http://forum.xda-developers.com/showthread.php?t=2678420
S3miniFin said:
You don't need root phone before new kernel or custom rom. And i believe you use wrong files for that and now phone wont boot.
Start over with original ROM. With that you can test is your phone ok. Then use ODIN for recovery kernel and custom rom. Also check this:http://forum.xda-developers.com/showthread.php?t=2678420
Click to expand...
Click to collapse
check my attached image.. i cant flash anything with odin. it gives me error fused 2 > binary 1
Silvershot said:
check my attached image.. i cant flash anything with odin. it gives me error fused 2 > binary 1
Click to expand...
Click to collapse
How about download-mode? Never seen ODIN-mode myself, so cannot understand what is going on there....
With download- mode i do all things with ODIN if need...
S3miniFin said:
How about download-mode? Never seen ODIN-mode myself, so cannot understand what is going on there....
With download- mode i do all things with ODIN if need...
Click to expand...
Click to collapse
that works, and it says downloading like normally when you try to flash something with odin, but it fails and gives me this error again: sw rev check fail: fused 2 > binarz 1
the rom im trying to flash is the DBT one in germany.
I am choosing AP btw, and not the other flash options.
S3miniFin said:
You don't need root phone before new kernel or custom rom. And i believe you use wrong files for that and now phone wont boot.
Start over with original ROM. With that you can test is your phone ok. Then use ODIN for recovery kernel and custom rom. Also check this:http://forum.xda-developers.com/showthread.php?t=2678420
Click to expand...
Click to collapse
i flashed one of those roms and i got my phone to boot. i have no wifi. i guess it was the last rom i flashed which was the wrong one.
i now tried the one which is supposed to be the correct rom but i land on the same error again. can someone help me find the correct stock rom?
here are the current device info. it seems that there is no official 4.4.2 rom for my phone. so i ****ed up lol.
Your phone has official 4.4.2 Rom and you are currently using it. If you have Wi-Fi issues, your can try to flash custom kernel (Silviu, alexax)
Sent from my GT-I9190 using Tapatalk
Silvershot said:
that works, and it says downloading like normally when you try to flash something with odin, but it fails and gives me this error again: sw rev check fail: fused 2 > binarz 1
the rom im trying to flash is the DBT one in germany.
I am choosing AP btw, and not the other flash options.
Click to expand...
Click to collapse
But why you use F.Reset Time -option? Clear that and try again.
---------- Post added at 12:12 AM ---------- Previous post was at 12:10 AM ----------
Silvershot said:
i flashed one of those roms and i got my phone to boot. i have no wifi. i guess it was the last rom i flashed which was the wrong one.
i now tried the one which is supposed to be the correct rom but i land on the same error again. can someone help me find the correct stock rom?
here are the current device info. it seems that there is no official 4.4.2 rom for my phone. so i ****ed up lol.
Click to expand...
Click to collapse
For Wifi problem could help if boot phone again after first setup.
ok now it wont go past the flashing SAMSUNG logo. i went and bought a huawei g play mini today. no more time trying to revive the s4 mini.
if someone wants to give it a try let me know and i'll ship it to you.
I will try it!
Plz sent me a PN (i'm german)
Sent from my GT-I9195 using XDA Free mobile app
S3miniFin said:
But why you use F.Reset Time -option? Clear that and try again.
---------- Post added at 12:12 AM ---------- Previous post was at 12:10 AM ----------
For Wifi problem could help if boot phone again after first setup.
Click to expand...
Click to collapse
i tried rebooting the phone but it still is as slow as before. it peaks on 27mbit when i start the speedtest but then drops down to 19 or sth..
actually the download speed seems to be the problem. not the upload. now i forgot the network and connected again and its even slower