Please Help Really Urgent, My dads gonna ... *insert worst here* ... me :crying::crying::crying:
Ok i decided to upgrade his phone gt-n7100 to kitkat 4.4, as a surprise .. but. :crying:
as per dr ketans instructions,
installed odin.
installed cwm.
downloaded N7100_ND3_DrKetan_Custom_ROM_V7_3. installed via cwm.
rebooted. worked fine.
But no net, and phone would not show charge icon so installed as recommended in the guide the bootloader N7100_ND from d-h.st/TQq
using odin (installed as bootloader)
rebooted ... but now phone stuck on intial screen. :crying: :crying: :crying:
CANNOT go into cwm
tried flashing cwm again. no avail
tried another rom N7100XXDMG1_N7100ODDDMG1_INU_Prerooted. it fails to flash
tried kies, to update rom, it says cannot update this device
cannot find stock image (hotfile is down), nor am sure if it will update.
please help, where did i went wrong. followed everything to the instructions. spend so long trying to fix it. finally posting here in hope of help
Please help. Thankss :crying:
ZainNaiz said:
Please Help Really Urgent, My dads gonna ... *insert worst here* ... me :crying::crying::crying:
Ok i decided to upgrade his phone gt-n7100 to kitkat 4.4, as a surprise .. but. :crying:
as per dr ketans instructions,
installed odin.
installed cwm.
downloaded N7100_ND3_DrKetan_Custom_ROM_V7_3. installed via cwm.
rebooted. worked fine.
But no net, and phone would not show charge icon so installed as recommended in the guide the bootloader N7100_ND from d-h.st/TQq
using odin (installed as bootloader)
rebooted ... but now phone stuck on intial screen. :crying: :crying: :crying:
CANNOT go into cwm
tried flashing cwm again. no avail
tried another rom N7100XXDMG1_N7100ODDDMG1_INU_Prerooted. it fails to flash
tried kies, to update rom, it says cannot update this device
cannot find stock image (hotfile is down), nor am sure if it will update.
please help, where did i went wrong. followed everything to the instructions. spend so long trying to fix it. finally posting here in hope of help
Please help. Thankss :crying:
Click to expand...
Click to collapse
1. Reboot to recovery - Power button+Home button+volume up then factory reset if this don't work:
2. Download a 4.4.2 rom from Sammobile and flash through Odin and then repeat the procedures to install Dr Keaton Rom.
Hope you can solve the problem.
ZainNaiz said:
Please Help Really Urgent, My dads gonna ... *insert worst here* ... me :crying::crying::crying:
Ok i decided to upgrade his phone gt-n7100 to kitkat 4.4, as a surprise .. but. :crying:
as per dr ketans instructions,
installed odin.
installed cwm.
downloaded N7100_ND3_DrKetan_Custom_ROM_V7_3. installed via cwm.
rebooted. worked fine.
But no net, and phone would not show charge icon so installed as recommended in the guide the bootloader N7100_ND from d-h.st/TQq
using odin (installed as bootloader)
rebooted ... but now phone stuck on intial screen. :crying: :crying: :crying:
CANNOT go into cwm
tried flashing cwm again. no avail
tried another rom N7100XXDMG1_N7100ODDDMG1_INU_Prerooted. it fails to flash
tried kies, to update rom, it says cannot update this device
cannot find stock image (hotfile is down), nor am sure if it will update.
please help, where did i went wrong. followed everything to the instructions. spend so long trying to fix it. finally posting here in hope of help
Please help. Thankss :crying:
Click to expand...
Click to collapse
You did a lot of steps that shouldn't have been done in the first place so instead of trying more things that wouldn't work just flash the official stock NE1 firmware from https://mega.co.nz/#!2QRmCbyb!YkWs927BfvYxqL-vJiQHXkshqG3UtqHm4XIDbgLsEK0 ,extract the zip file you'll get a tar file ,put your phone into download mode , (uninstall kies) only run odin, connect the phone to computer,make sure the ID:COM turns blue then check mark AP/PDA tab on odin and select the downloaded firmware.Dont touch anything else hit start and let odin do it's magic once your dad's phone successfully boots and you get network etc etc.then ask me i'll tell how to root the stock firmware and run custom ROM.Good luck.
singhpratik87 said:
You did a lot of steps that shouldn't have been done in the first place so instead of trying more things that wouldn't work just flash the official stock NE1 firmware from https://mega.co.nz/#!2QRmCbyb!YkWs927BfvYxqL-vJiQHXkshqG3UtqHm4XIDbgLsEK0 ,extract the zip file you'll get a tar file ,put your phone into download mode , (uninstall kies) only run odin, connect the phone to computer,make sure the ID:COM turns blue then check mark AP/PDA tab on odin and select the downloaded firmware.Dont touch anything else hit start and let odin do it's magic once your dad's phone successfully boots and you get network etc etc.then ask me i'll tell how to root the stock firmware and run custom ROM.Good luck.
Click to expand...
Click to collapse
Thankyou Sooooooo verrrrrrrrrrrrrrrrrrrrrry muchhhhhhhhhhh :laugh: Bless You.
Thanks For the detailed step by step with the link AND working reply. Thankyou. This is the first rom that worked, i even tried another and thought phone is dead and me.
Please let me know how to kitkat it now.
Should i follow same steps.
i.e install cwm
then should i first install wifi driver by dr ketan, or boot loader or the rom ? from here forum.xda-developers.com/showthread.php?t=2472270
Thanks again :laugh:
very odd.
the phone after flashing, is now booting into previous rom i.e 4.4 Kitkat ???
is my phone screwed? using odin 3.04
shouldn't it be booting into stock now as you said after the flashing
thanks
ZainNaiz said:
very odd.
the phone after flashing, is now booting into previous rom i.e 4.4 Kitkat ???
is my phone screwed? using odin 3.04
shouldn't it be booting into stock now as you said after the flashing
thanks
Click to expand...
Click to collapse
That's odd,go perform a factory reset and see what happens.Which one was your previous ROM?
Edit: After factory reset if it still boots in your old ROM, reflash the stock rom i gave you and then tell me what happens.
Use odin v3.09 at least ill give you the link hold on
http://odindownload.com/
Are you sure it's the OLD ROM and not stock rom?Check in settigns>>about device>>and tell what you see under build # cause the link i gave you is of Kitkat ROM too NE1 firmware
singhpratik87 said:
That's odd,go perform a factory reset and see what happens.Which one was your previous ROM?
Edit: After factory reset if it still boots in your old ROM, reflash the stock rom i gave you and then tell me what happens.
Use odin v3.09 at least ill give you the link hold on
Are you sure it's the OLD ROM and not stock rom?Check in settigns>>about device>>and tell what you see under build # cause the link i gave you is of Kitkat ROM too NE1 firmware
Click to expand...
Click to collapse
Thankyou. Downloaded Odin 3.09. Reflashed it. Its Stock Now KOT49H.N7100XXUFNE1
Please tell me should i now directly install dr ketans rom without boot loader and wifi? Thanks
ZainNaiz said:
Thankyou. Downloaded Odin 3.09. Reflashed it. Its Stock Now KOT49H.N7100XXUFNE1
Please tell me should i now directly install dr ketans rom without boot loader and wifi? Thanks
Click to expand...
Click to collapse
Yes you dont need bootloader nor wifi fix anymore since flashing official stock 4.4.2 you are on the newest boootloader.Now you need to root your phone.So you need philz touch 6.41.tar file and supersu v 1.97.
Philz tar file
SuperSu v1.97
Refer to this post of mine in another thread How to root
The above posts show how to flash recovery in odin and do exactly what it says in the image UNCHECK AUTO REBOOT IN ODIN once its done flashing and says pass phone wont be turned off so remove the phone from laptop and pull the battery out and follow my instructions there.
Once you boot your phone again after flashing superSU it will ask you if you want to disable KNOX select yes (knox will be triggered to 0x1 that means warranty will be void)
Also thank the person when you visit his thread since he made the thread and i just helped him a bit.his id is smeet.somaiya
singhpratik87 said:
Yes you dont need bootloader nor wifi fix anymore since flashing official stock 4.4.2 you are on the newest boootloader.Now you need to root your phone.So you need philz touch 6.41.tar file and supersu v 1.97.
Philz tar file
SuperSu v1.97
Refer to this post of mine in another thread How to root
The above posts show how to flash recovery in odin and do exactly what it says in the image UNCHECK AUTO REBOOT IN ODIN once its done flashing and says pass phone wont be turned off so remove the phone from laptop and pull the battery out and follow my instructions there.
Once you boot your phone again after flashing superSU it will ask you if you want to disable KNOX select yes (knox will be triggered to 0x1 that means warranty will be void)
Also thank the person when you visit his thread since he made the thread and i just helped him a bit.his id is smeet.somaiya
Click to expand...
Click to collapse
Thanks. Thanked the person. And Your Post.
Just installed cwm and super su. thanks again.
Btw the link to download odin seems to be spamware, insted of downloading odin, i got a program 104kb giving lots of options, and at the end still did not install odin. Just for info. (i already had odin later version, and used that before, but wanted to check if a newer one is available, so header over there).
Going to install dr ketans custom rom. fingers crossed.
Thanks for all the help, will update, how it goes.
It never asked me to disable knox...
Would it be problematic if knox is not disabled ? as i wanted to use knox.
...
Finished flashing dr ketans rom, and it booted just fine, albiet slow compared to the stock rom.
Thankyou Pratik for all the help with detail and correctness.
Bless You.
ZainNaiz said:
It never asked me to disable knox...
Would it be problematic if knox is not disabled ? as i wanted to use knox.
...
Finished flashing dr ketans rom, and it booted just fine, albiet slow compared to the stock rom.
Thankyou Pratik for all the help with detail and correctness.
Bless You.
Click to expand...
Click to collapse
Ya i think all the custom ROM for our note 2 are heavily modded the latest ones that's why sometimes just to feel the smoothness i flash back stock ROM and when i get bored of them i flash one of the custom roms.Glad to know you were able to successfully flash the rom of your choice.Enjoy.
Help
Hello everybody, I have a problem with my galaxy note 2 N7100.
The problem is the following:
One day I was using my phone normally, and all of a sudden the screen turned off and the phone never turned on again, (if you press the power button the screen turns a little gray, but you must be in a dark place to perceive it)
I can't access download or any other mode, or at least I can't detect if the phone has accessed it, because the screen just turns a little gray and does nothing else.
I have the drivers and have the official ROM for my region, ODIN installed, ADB, and other flashing tools and recovery files. But it has been long time since the last time I flashed something or did anything to the device and would appreciate a little help.
Can anyone here help me to solve this issue or knows what is happening with my phone?
Thank you for any kind of help you can give me
Update: I "think" I got into download mode blindly, just press the home+power+down vol buttons, then pressed up vol and connected the phone to the usb, surprisingly the computer made the usb sound that indicated me that the connection was recognized, Odin showed the ID:COM blue, so I proceeded to load the original rom and flash it, it took around 3.5 minutes and finally it showed succesful. But when I pressed the power button to turn on the phone, the screen still grey and doesn't start. I'm starting to think its a screen problem. I already purchased a new screen so I'm going to tell a frend to install it for me.
I'll be in touch
Related
I am new here and would like to ask this question and I sure hope you can help.
So here is the story I work in IT I am very saving but never got the chance to root my phone because I didn't want to brick it. But now I am tired of waiting for jelly bean update for my T-mobile Samsung GS3. I watch all the videos on how to go into download mode and use Odin v1.85 to install a rom(I think that's what it does sorry if it's not correct I am a noob when it comes to this) Any way when I tried to install it everything passed and everything seemed ok. But when it rebooted it wasn't rooted and I didn't understand why so when I went back into download mode to see if I did something wrong. When I went back into it I found out something that I am pissed about. With the latest firmware update(please excuse if this is wrong but i think I am right) It says Qualcomm secureboot: Enable Does this mean they have locked the boot loader so I cannot root or put a custom rom on my GS3?
If you could please tell me what that means it would be great. I have uploaded a screen shot if anybody wants to see it. Is there a way around this?
You most likey flashed a non rooted firmware usually odin firmware isnt rooted unless someone linked u to a firmware with root injected right into it..are u on fw lj4 or lh2?? Either way there are very easy and safe ways to root..let me know if u want me to link u anything.
Also the bootloader is not locked there is no need to worry.. just odin flash clockwork.tar and then from there u can flash root and bingo!
Sent from my SGH-T999 using xda app-developers app
Five10legacy said:
I am new here and would like to ask this question and I sure hope you can help.
So here is the story I work in IT I am very saving but never got the chance to root my phone because I didn't want to brick it. But now I am tired of waiting for jelly bean update for my T-mobile Samsung GS3. I watch all the videos on how to go into download mode and use Odin v1.85 to install a rom(I think that's what it does sorry if it's not correct I am a noob when it comes to this) Any way when I tried to install it everything passed and everything seemed ok. But when it rebooted it wasn't rooted and I didn't understand why so when I went back into download mode to see if I did something wrong. When I went back into it I found out something that I am pissed about. With the latest firmware update(please excuse if this is wrong but i think I am right) It says Qualcomm secureboot: Enable Does this mean they have locked the boot loader so I cannot root or put a custom rom on my GS3?
If you could please tell me what that means it would be great. I have uploaded a screen shot if anybody wants to see it. Is there a way around this?
Click to expand...
Click to collapse
I 100% understand where you are coming from I'm in IT also:
Lets get to it then, shall we?
So first make sure the drivers are installed for your T-Mobile S3 (drivers link): http://www.samsung.com/us/support/owners/product/SGH-T999MBATMB
Next, download Odin v3.40: http://forum.xda-developers.com/showthread.php?t=1670973
Then, get all the files at this link, they contain the Odin version if you dont want to install it using the link above^, clockworkmod.tar & a SuperSU program to flash to get super user permissions & be officially rooted.
When you run ODIN, right click it & select Run from Administrator. Now click the PDA button & browse for the clockworkmod.tar & click start, it'll flash the recovery & auto reboot
Then to flash the SuperSU, reboot into recovery (i believe u hold down the volume down button, home button & power at the same time, if not then its the volume up button instead of the down button)
U should be in Clockworkmod now, click install zip from file, then choose zip from file, then navigate to the SuperSU program that you put on your INTERNAL memory (not external, which is your SD card), flash it & reboot.
Your officially rooted
by the way, let me know what rom you choose! Im between 2 right now, Frosty 4.1.1 v6 & XquizIT v33 (LIH/LI8)
Thanks both of you. I will try the links you sent me @svibrant67. I was just worried that they locked the boot loader and now I know its not so I am relived. When I follow these steps will it install Rom manager so I can make a nandroid backup? I just want to make sure I can get it back to stock just in case I have to get a warranty repair on it.
Five10legacy said:
Thanks both of you. I will try the links you sent me @svibrant67. I was just worried that they locked the boot loader and now I know its not so I am relived. When I follow these steps will it install Rom manager so I can make a nandroid backup? I just want to make sure I can get it back to stock just in case I have to get a warranty repair on it.
Click to expand...
Click to collapse
Once you flash clockworkmod.tar & your phone reboots, put it into clockworkmod recovery & from their before you flash anything else, nivigate to backup/restore, then backup & it'll make a nandroid .
Thanks for the Information I am currently running FrostyJB_4.1.1-v6 with kernel KT747 and modem UVLI7. This thing flies now. The only problem I am having is sometimes wifi calling stops but I bet it is mostly because the Offical JB rom isn't out yet. Also everytime I restart my phone it switches back to default keyboard and doesn't keep my Swiftkey as default. But besides that I am very happy. Thanks again for replying so fast.
I tried to update my ginger running phone to ICS. The phone had official rom, it was untouched.
After official update vie Kies will not boot. It gets stuck at at&t boot animation.
Its possible to boot to download mode, so I played a bit with odin. I tried to root it and instal cwm to by possible to flash it.
Odin wrote success all the time, but nothing changed at my phone. I cant even boot to cwm.
Please help
dudanko said:
I tried to update my ginger running phone to ICS. The phone had official rom, it was untouched.
After official update vie Kies will not boot. It gets stuck at at&t boot animation.
Its possible to boot to download mode, so I played a bit with odin. I tried to root it and instal cwm to by possible to flash it.
Odin wrote success all the time, but nothing changed at my phone. I cant even boot to cwm.
Please help
Click to expand...
Click to collapse
maybe anyone could reupload you a version of this oneclick update - the link in the thread seems to be down
http://forum.xda-developers.com/showthread.php?t=1831561&highlight=oneclick
Roeni said:
maybe anyone could reupload you a version of this oneclick update - the link in the thread seems to be down
http://forum.xda-developers.com/showthread.php?t=1831561&highlight=oneclick
Click to expand...
Click to collapse
It would be nice, but I cant even start cwm
dudanko said:
It would be nice, but I cant even start cwm
Click to expand...
Click to collapse
I tried root according to this :
http://forum.xda-developers.com/showthread.php?t=1378082
and cwm with this:
http://forum.xda-developers.com/showthread.php?t=2007198
Odin wrote success after all operations
When I press both volume keys and power, nothing happens.
This is NOT DEV related...
Thread reported
From the moderator
Odin back to stock from download mode........ use the already rooted image if it's still around then go from there........
thread moved
First of all sorry for my bad English.
I have a device with 4.3
When i was trying to root that device a problem happened and odin crushed. After that my device couldnt open. "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" massage is on screen.
And
On download mode is
Custom Binary Download : Yes (1 counts)
Current Binary : Custom
System Status : Custom
Knox Warranty Void : 1
Ap Swrev : A2
How can i install new firmware. Please help. Can i odin any stock rom?
I have no other telephone so i'm in big trouble.
Don't panic.
Just download ODIN flashable Stock Firmware which should be higher than MK4. Flash it carefully through PC ODIN and you should be good.
Once your phone boots normally to new ROM, reboot once again.
Then switch off, start in Download Mode and flash PhilZ (or whichever you like) recovery through PC ODIN.
After it you can flash any Custom ROM (they all are prerooted).
Good Luck !!!
Edit:
Check this http://forum.xda-developers.com/showthread.php?t=2536423
silentvisitor said:
Don't panic.
Just download ODIN flashable Stock Firmware which should be higher than MK4. Flash it carefully through PC ODIN and you should be good.
Once your phone boots normally to new ROM, reboot once again.
Then switch off, start in Download Mode and flash PhilZ (or whichever you like) recovery through PC ODIN.
After it you can flash any Custom ROM (they all are prerooted).
Good Luck !!!
Edit:
Check this http://forum.xda-developers.com/showthread.php?t=2536423
Click to expand...
Click to collapse
thank you for your attention. Can you give me an example Stock firmware higher than MK4. I tried one and failed. Sorry for bothering u
Like ML3, ML4 or ML6.
How it failed? What Error message?
Nothing like bothering. I will be happy if I could be of any help to you or anyone here
silentvisitor said:
Like ML3, ML4 or ML6.
How it failed? What Error message?
Nothing like bothering. I will be happy if I could be of any help to you or anyone here
Click to expand...
Click to collapse
I tried to install N7100XXUEMK9_N7100PHNEMK2_N7100XXUEMJ9_HOME.tar and from odin 3.07 pda input. Than failed. Unsupported version shows up on my screen download mode.
I'm downloading N7100XXUEMK4_N7100ODDEMK1_N7100DDEMJ9_INU.zip is that works? Maybe ypu can lough but i cant understand which one is higher than MK4 If it's wrong, could you give me correct link of version? Sorry again and again. I'm in trouble with english instructions. :/
could anyone give me any stock rom link that higher than MK4 please :/
i tried to install that rom : http://forum.xda-developers.com/showthread.php?t=2531989
but same issue again. i'm downloading rom than putting odins PDA coulmn but i cant install. FAIL and, unssupported version.
please help me am i doing wrong? what must i do?
frendlyy said:
i tried to install that rom : http://forum.xda-developers.com/showthread.php?t=2531989
but same issue again. i'm downloading rom than putting odins PDA coulmn but i cant install. FAIL and, unssupported version.
please help me am i doing wrong? what must i do?
Click to expand...
Click to collapse
Silly question, but have you tried
removing battery and rebooting?
booting into download mode or stock recovery?
tweeny80 said:
Silly question, but have you tried
removing battery and rebooting?
booting into download mode or stock recovery?
Click to expand...
Click to collapse
i tried but it didnt work that time.
After that day i found a rom which "SMA-N7100XXUEML3-20131219143048" i tried to flash with odin and worked.
I solved my issue with our helps, thank u.
same problem
ok
i don't know how i did that stupid thing ! i'm using note 2 gt-n7100 ( rooted ) i tried to install a new rom that doesn't built for my phone with " mobile odin v 4.2 pro unfortunately it flashed the sumsung star dous stock rom on my mobile but it doesn't boot .. i entered the philz touch recovery menu and select clean to install a new rom and restore my old rom and the problems started to appear !
the first thing is when i press the power button to lock my note 2 and try to open it again i find no response at all and the only way is to remove the battery and re turn it on again and try not to press the lock button as if i do so my mobile gives me no response and the screen doesn't turn on !
the second matter i noticed that when the start up i found the bluetooth icon trying to turn to green like i'm turning the bluetooth on but a few seconds it didn't turn on even i try to turn it ! the bluetooth doesn't work at all !
the third thing when i recieve a call that turn on the proximty sensor automatically if i touch the sensor the screen go black but i lose the control and give me no response at all and i have to remove the battery and turn it on again !
the things i noticed when i flashed the galaxy star rom with mobile odin that it has partion called param and the note to doesn't have it with its rom but have partion called modem which i didn't found in the galaxy star rom !
i need help please how i delete things that caused that conflict .. i tried to reflash the stock rom of my note with odin on my lap top but nothig changed and it hanging and the screen freezes with no control at all and that happened when i try to use a custom rom and flash it through the recovery .. please help urgently
sorry for my bad english
Two options I see:
1. Try to restore your device using Kies3
2. Flash newest firmware (get it from sammobile) for your region using PC-Odin.
Putting "need help urgently please :'(" does not help you in any way, in fact it makes it more likely that people will simply ignore the topic. Topic titles need to be descriptive, not generic non-descriptive.
Your problem is that like many newbies you cant be bothered to do research, read and learn before messing around with your device.
You should boot into download mode and flash a stock rom. Preferably a older one that doesn't have knox. Then flash a stock rom(without knox) in recovery mode. All the info you need is here on forum.
Androidwizzard said:
Two options I see:
1. Try to restore your device using Kies3
2. Flash newest firmware (get it from sammobile) for your region using PC-Odin.
Click to expand...
Click to collapse
i forgot to tell that one of the things changed that my mobile lost the usb support in the normal mode as there is no change when i connect it to my pc except it charges only but it works in the download mode and when i reflash the stock rom v 4.3 the screen freezes after a few seconds of turning it on and i have to remove the battery .. do you think that flashing the 4.4.2 sthock rom will make a change ? as the solution of kies isn't possible due to the lack of usb support !
is there a way to format the sectors that the pation " param " which flashed by the sumsung star dous stock rom is in it and make that conflict to delete that ??
What was your last stock rom on your device before messing up?
I do absolutely not agree with those horror tales about knox, most people don't use and easily get rid of.
Do you remember your last bootloader? MK4 or above? Then don't take any risk by flashing 4.3 firmware and go straight ahead to 4.4.2.
It will be the safest way to get a working device again.
TheATHEiST said:
Putting "need help urgently please :'(" does not help you in any way, in fact it makes it more likely that people will simply ignore the topic. Topic titles need to be descriptive, not generic non-descriptive.
Your problem is that like many newbies you cant be bothered to do research, read and learn before messing around with your device.
You should boot into download mode and flash a stock rom. Preferably a older one that doesn't have knox. Then flash a stock rom(without knox) in recovery mode. All the info you need is here on forum.
Click to expand...
Click to collapse
i'm sorry for the way i show my problem as i'm a newbie already .. it that possible to downgrade my rom ? i will try install 4.1.2 rom then flasing the 4.4.2 one but when i flashed the 4.3 stock rom the screen freezes and nothing changed what do you think of that ? it there's a way to delete the " param " found in the sumsung galaxy star dous rom ? i think that made this conflict but try to explain to me why flashing an old rom then a new one without knox ? what will that do ?
Androidwizzard said:
What was your last stock rom on your device before messing up?
I do absolutely not agree with those horror tales about knox, most people don't use and easily get rid of.
Do you remember your last bootloader? MK4 or above? Then don't take any risk by flashing 4.3 firmware and go straight ahead to 4.4.2.
It will be the safest way to get a working device again.
Click to expand...
Click to collapse
i was using dn3 rom which has android version v 4.4.2 but i enter the recovery and restored the stock rom v 4.3 and it works with no problem and it was the last rom i use it when i flashed the star dous rom through the mobile odin in my mobile .. is there is a things i must do when i'm flashin the rom through the pc odin ? like check the repartion option or some thing else ?
my bootloader version is : n7100xxuena1 what that mean ?
omar youssef said:
i was using dn3 rom which has android version v 4.4.2 but i enter the recovery and restored the stock rom v 4.3 and it works with no problem and it was the last rom i use it when i flashed the star dous rom through the mobile odin in my mobile .. is there is a things i must do when i'm flashin the rom through the pc odin ? like check the repartion option or some thing else ?
my bootloader version is : n7100xxuena1 what that mean ?
Click to expand...
Click to collapse
So you can also try the NA1 firmware, but nothing beneath that. NA1 is a knox enabled BL, so whatever you flash successfully will have Knox in it.
DON'T TICK REPARTITION!
Androidwizzard said:
So you can also try the NA1 firmware, but nothing beneath that. NA1 is a knox enabled BL, so whatever you flash successfully will have Knox in it.
DON'T TICK REPARTITION!
Click to expand...
Click to collapse
what you mean of the NA1 firmware if you mean the 4.3 stock rom i flashed it with the pc odin and my mobile screen freezes as i told you and nothing changed .. give me obvious steps 1 2 3 to do it to solve this problem and if you can give me a suitable download links .. now you know all the issues with my mobile and thanks for your interst
omar youssef said:
what you mean of the NA1 firmware if you mean the 4.3 stock rom i flashed it with the pc odin and my mobile screen freezes as i told you and nothing changed .. give me obvious steps 1 2 3 to do it to solve this problem and if you can give me a suitable download links .. now you know all the issues with my mobile and thanks for your interst
Click to expand...
Click to collapse
1) Go to Sammobile
2) Find firmware for your region -> download
3) Find Odin 3.09 -> download and install
4) Start Odin 3.09
5) Plugin device -> see if Odin displays active com port
6) Go into download mode
7) Link firmware download in tab PDA/AP
8) Let Odin check md5
9) Press start button
10) Wait until display of com port in Odin turns green and says success.
All these steps could also be found with an easy Google search or in Youtube tutorials
Androidwizzard said:
1) Go to Sammobile
2) Find firmware for your region -> download
3) Find Odin 3.09 -> download and install
4) Start Odin 3.09
5) Plugin device -> see if Odin displays active com port
6) Go into download mode
7) Link firmware download in tab PDA/AP
8) Let Odin check md5
9) Press start button
10) Wait until display of com port in Odin turns green and says success.
All these steps could also be found with an easy Google search or in Youtube tutorials
Click to expand...
Click to collapse
Thanks for your work but I did all these steps but my mobile freezes and noying changed fir sorry .. I flashed the 4.4.2 kitkat stock rom which is the latest one !
omar youssef said:
Thanks for your work but I did all these steps but my mobile freezes and noying changed fir sorry .. I flashed the 4.4.2 kitkat stock rom which is the latest one !
Click to expand...
Click to collapse
OK, I see. Try a wipe from stock recovery, wipe all possible.
Another option: Kies!
I know, you said not recognized but you must get it to work. Uninstall all drivers from PC an re-install drivers until Kies can restore your device.
Very last option: Find a Samsung repair near to you.
Androidwizzard said:
OK, I see. Try a wipe from stock recovery, wipe all possible.
Another option: Kies!
I know, you said not recognized but you must get it to work. Uninstall all drivers from PC an re-install drivers until Kies can restore your device.
Very last option: Find a Samsung repair near to you.
Click to expand...
Click to collapse
Look I searched the internet find something I think it will be useful if we can use it successfully called n7100 rescue rom consists of 5 files in one zip file it is the fully original factory rom but unfortunately it's 4.1.2 jellybean so how can I flash this rom successfully ? Is it possible downgrade the bootloader first or what ?? Please help
omar youssef said:
Look I searched the internet find something I think it will be useful if we can use it successfully called n7100 rescue rom consists of 5 files in one zip file it is the fully original factory rom but unfortunately it's 4.1.2 jellybean so how can I flash this rom successfully ? Is it possible downgrade the bootloader first or what ?? Please help
Click to expand...
Click to collapse
As you mentioned you already have been on NA1 firmware and as it seems you have flashed latest 4.4.2 with "a kind of success" I find it hope- and useless to even try this rescue rom. Bootloader is the reason why you can't successfully flash. NO DOWNGRADE POSSIBLE.
Androidwizzard said:
As you mentioned you already have been on NA1 firmware and as it seems you have flashed latest 4.4.2 with "a kind of success" I find it hope- and useless to even try this rescue rom. Bootloader is the reason why you can't successfully flash. NO DOWNGRADE POSSIBLE.
Click to expand...
Click to collapse
Can you illustrate your words ? For kies it's unpossible to connect my mobile to any pc the drivers works perfectly for any similarphone the fault is in my mobile not the driver and for sumsung care it will be high cost as the warranty ended ! And I wipe every thing possible through the stock recovery but noyhing changed !
I am beginning to lose my patience cause you don't follow my advice or even don't consider that I am right.
Look into system on your PC if there is an unknown device.
Whenever hardware is connected to PC Windows starts to search for drivers.
It doesn't matter that other devices are recognized correctly.
Wipe all Samsung drivers and re-install. Even re-install Kies too.
Start Kies and try restoration, maybe it will fail, but try. AND with current drivers you are supposed to fail.
At last: Try to find a friend with knowledge who can help you at your home or his.
I recently rooted my I9195 successfully. i then flashed a custom kernel i found here on the forum (kernel v1 or sth like that) then my phone wouldn go past the boot white logo screen. i then tried flashing other kernels but they were apparently wrong as some features of my phone didnt work. i finally found the right firmware for my phone and tried to flash it with odin but it failed and now my phone only shows this message where it says that the firmware update failed and i have to use kies in recovery mode.
so i use kies and try the install firmware thing that asks you to put in your model and serial number. i do that and it says the device doesnt support initialisation. tried on another computer and it said that serial number was invalid.. i was very careful when typing it etc.
help.. what do i do?
btw last firmware i had was 4.4.2
Silvershot said:
I recently rooted my I9195 successfully. i then flashed a custom kernel i found here on the forum (kernel v1 or sth like that) then my phone wouldn go past the boot white logo screen. i then tried flashing other kernels but they were apparently wrong as some features of my phone didnt work. i finally found the right firmware for my phone and tried to flash it with odin but it failed and now my phone only shows this message where it says that the firmware update failed and i have to use kies in recovery mode.
so i use kies and try the install firmware thing that asks you to put in your model and serial number. i do that and it says the device doesnt support initialisation. tried on another computer and it said that serial number was invalid.. i was very careful when typing it etc.
help.. what do i do?
btw last firmwar i had was 4.4.2
Click to expand...
Click to collapse
I think you should put original back and start over and read forum more howto.
You use ODIN to flash custom rom, why? ODIN is for original rom. With custom rom need use TWRP or other recovery boot.
S3miniFin said:
I think you should put original back and start over and read forum more howto.
You use ODIN to flash custom rom, why? ODIN is for original rom. With custom rom need use TWRP or other recovery boot.
Click to expand...
Click to collapse
I used ODIN for past phones to flash custom kernels and it worked fine. i said i flashed someone that isnt supposed to be supported. i have no idea. i am not an expert and i thought someone can provide with a fast fix since there will surely be someone to have experienced this issue.
anyone else?
bump! please help.. i dont have another phone and I need to get this fixed asap!
You don't need root phone before new kernel or custom rom. And i believe you use wrong files for that and now phone wont boot.
Start over with original ROM. With that you can test is your phone ok. Then use ODIN for recovery kernel and custom rom. Also check this:http://forum.xda-developers.com/showthread.php?t=2678420
S3miniFin said:
You don't need root phone before new kernel or custom rom. And i believe you use wrong files for that and now phone wont boot.
Start over with original ROM. With that you can test is your phone ok. Then use ODIN for recovery kernel and custom rom. Also check this:http://forum.xda-developers.com/showthread.php?t=2678420
Click to expand...
Click to collapse
check my attached image.. i cant flash anything with odin. it gives me error fused 2 > binary 1
Silvershot said:
check my attached image.. i cant flash anything with odin. it gives me error fused 2 > binary 1
Click to expand...
Click to collapse
How about download-mode? Never seen ODIN-mode myself, so cannot understand what is going on there....
With download- mode i do all things with ODIN if need...
S3miniFin said:
How about download-mode? Never seen ODIN-mode myself, so cannot understand what is going on there....
With download- mode i do all things with ODIN if need...
Click to expand...
Click to collapse
that works, and it says downloading like normally when you try to flash something with odin, but it fails and gives me this error again: sw rev check fail: fused 2 > binarz 1
the rom im trying to flash is the DBT one in germany.
I am choosing AP btw, and not the other flash options.
S3miniFin said:
You don't need root phone before new kernel or custom rom. And i believe you use wrong files for that and now phone wont boot.
Start over with original ROM. With that you can test is your phone ok. Then use ODIN for recovery kernel and custom rom. Also check this:http://forum.xda-developers.com/showthread.php?t=2678420
Click to expand...
Click to collapse
i flashed one of those roms and i got my phone to boot. i have no wifi. i guess it was the last rom i flashed which was the wrong one.
i now tried the one which is supposed to be the correct rom but i land on the same error again. can someone help me find the correct stock rom?
here are the current device info. it seems that there is no official 4.4.2 rom for my phone. so i ****ed up lol.
Your phone has official 4.4.2 Rom and you are currently using it. If you have Wi-Fi issues, your can try to flash custom kernel (Silviu, alexax)
Sent from my GT-I9190 using Tapatalk
Silvershot said:
that works, and it says downloading like normally when you try to flash something with odin, but it fails and gives me this error again: sw rev check fail: fused 2 > binarz 1
the rom im trying to flash is the DBT one in germany.
I am choosing AP btw, and not the other flash options.
Click to expand...
Click to collapse
But why you use F.Reset Time -option? Clear that and try again.
---------- Post added at 12:12 AM ---------- Previous post was at 12:10 AM ----------
Silvershot said:
i flashed one of those roms and i got my phone to boot. i have no wifi. i guess it was the last rom i flashed which was the wrong one.
i now tried the one which is supposed to be the correct rom but i land on the same error again. can someone help me find the correct stock rom?
here are the current device info. it seems that there is no official 4.4.2 rom for my phone. so i ****ed up lol.
Click to expand...
Click to collapse
For Wifi problem could help if boot phone again after first setup.
ok now it wont go past the flashing SAMSUNG logo. i went and bought a huawei g play mini today. no more time trying to revive the s4 mini.
if someone wants to give it a try let me know and i'll ship it to you.
I will try it!
Plz sent me a PN (i'm german)
Sent from my GT-I9195 using XDA Free mobile app
S3miniFin said:
But why you use F.Reset Time -option? Clear that and try again.
---------- Post added at 12:12 AM ---------- Previous post was at 12:10 AM ----------
For Wifi problem could help if boot phone again after first setup.
Click to expand...
Click to collapse
i tried rebooting the phone but it still is as slow as before. it peaks on 27mbit when i start the speedtest but then drops down to 19 or sth..
actually the download speed seems to be the problem. not the upload. now i forgot the network and connected again and its even slower