Develop Bugs

Note II (n7100) - Constant freezing and rebooting

Hi,
Have a Note II as an alternative phone. Apparently, the phone worked correctly until last month. It started to reboot, not too much, but it happened. Well, I tried to give a solution changing the ROM (when it started with the problem I was in 4.4.2 OmniROM). My first try was with Omega ROM, cause it was my first custom ROM when I bought the phone with 4.1.2 in, but the problem persist (maybe increment the number of reboots-freezes/day) so I changed it again to Android Revolution HD, but it only increment the reboots/freezes.
It seems that it's not a ROM installation problem or something like that, maybe it's a hardware problem, but I would like to hear your opinions about it.
Now the phone have:
TWRP recovery
Rooted
Android Revolution HD
I am thinking on put the stock ROM and bootloader with Odin. What do you think?
Thanks!

Could you enter recovery, format /system /data /cache and flash clean Omni > reboot >reboot to recovery >flash Gapps> reboot and observe without installing any apps. Until it freezes or reboots anyway.

My dad also has note 2,he had the same problem on many different roms.
He had to give it back to repair. They've replaced power button and something else, after that the phone seems normal.
Sent from galaxy n7105

mat9v said:
Could you enter recovery, format /system /data /cache and flash clean Omni > reboot >reboot to recovery >flash Gapps> reboot and observe without installing any apps. Until it freezes or reboots anyway.
Click to expand...
Click to collapse
Hi mat9v,
Thanks for your reply. I am in the office now, but I will try it as soon as I can. I thought on your suggestion too, so I will give a chance .
In case of it does not working, if I restore to stock ROM, will it restore the bootloader and recovery automatically too?
My actual bootloader if I am not wrong, is MJ5 bootloader (to fix the WiFi problems with custom ROMs in 4.3).
Thanks!
Edit:
jakuburban said:
My dad also has note 2,he had the same problem on many different roms.
He had to give it back to repair. They've replaced power button and something else, after that the phone seems normal.
Sent from galaxy n7105
Click to expand...
Click to collapse
Did you repair it even with custom ROM? Samsung does not accept it, right? Anyway, my phone is not in guarantee time.
Thanks!

Nah, of course I restored it to official 4.1.2 so everything was like new.
If You don't have guarantee, not good
Sent from galaxy n7105

pep0te said:
Hi mat9v,
Thanks for your reply. I am in the office now, but I will try it as soon as I can. I thought on your suggestion too, so I will give a chance .
In case of it does not working, if I restore to stock ROM, will it restore the bootloader and recovery automatically too?
My actual bootloader if I am not wrong, is MJ5 bootloader (to fix the WiFi problems with custom ROMs in 4.3).
Thanks!
Click to expand...
Click to collapse
Yes, it will overwrite both bootloader and recovery, unroot and so on. Be careful with KNOX and look for TriangleAway to reset flash status to factory.

jakuburban said:
Nah, of course I restored it to official 4.1.2 so everything was like new.
If You don't have guarantee, not good
Sent from galaxy n7105
Click to expand...
Click to collapse
Hope I can fix it by other way then . Thanks!
mat9v said:
Yes, it will overwrite both bootloader and recovery, unroot and so on. Be careful with KNOX and look for TriangleAway to reset flash status to factory.
Click to expand...
Click to collapse
Hm, could you explain me a bit? Sorry if my question is stupid.
Thanks a lot.

pep0te said:
Hope I can fix it by other way then . Thanks!
Hm, could you explain me a bit? Sorry if my question is stupid.
Thanks a lot.
Click to expand...
Click to collapse
If you want to return the phone to service center you mast be careful to maintain KNOX status 0 and Software status: Factory or they may refuse to fix the phone (warranty void by messing with software) - it's not such a big deal here in Europe but in US there are some stupid rules like that. So long as you remain on MJ5 bootloader you should have no problem with KNOX when you flash Samsung firmware but Firmware status: Modified vs Factory require using TriangleAway program to reset specific counters. Find it on Playstore and follow the link there to explanation on how to proceed.

mat9v said:
If you want to return the phone to service center you mast be careful to maintain KNOX status 0 and Software status: Factory or they may refuse to fix the phone (warranty void by messing with software) - it's not such a big deal here in Europe but in US there are some stupid rules like that. So long as you remain on MJ5 bootloader you should have no problem with KNOX when you flash Samsung firmware but Firmware status: Modified vs Factory require using TriangleAway program to reset specific counters. Find it on Playstore and follow the link there to explanation on how to proceed.
Click to expand...
Click to collapse
Hi mat9v,
Just fyi, I am from Europe . So this mean that I should check if Firmware status is "Modified" or "Factory" and KNOX = 0. In case of it is "Modified" (most probably right?) or KNOX = 1 or more, I must use TriangleAway to reset the counters.
That's okay, thank you all for your help . I will try and give my feedback asap!

pep0te said:
Hi mat9v,
Just fyi, I am from Europe . So this mean that I should check if Firmware status is "Modified" or "Factory" and KNOX = 0. In case of it is "Modified" (most probably right?) or KNOX = 1 or more, I must use TriangleAway to reset the counters.
That's okay, thank you all for your help . I will try and give my feedback asap!
Click to expand...
Click to collapse
You can't reset KNOX counter if you are on a bootloader newer than MJ5 (it's been tested that on MJ5 you can deal with it by flashing earlier firmware along with older bootloader). More info HERE

mat9v said:
You can't reset KNOX counter if you are on a bootloader newer than MJ5 (it's been tested that on MJ5 you can deal with it by flashing earlier firmware along with older bootloader). More info HERE
Click to expand...
Click to collapse
How can I check my bootloader? I am almost sure that is MJ5 but... better to check.
Thanks!
Edit:
The stock ROM I should install is the 4.3 I choose in sammobile, right? Spain country in my case.
http://www.sammobile.com/firmwares/3/?download=23362
Thank you.

pep0te said:
How can I check my bootloader? I am almost sure that is MJ5 but... better to check.
Thanks!
Edit:
The stock ROM I should install is the 4.3 I choose in sammobile, right? Spain country in my case.
http://www.sammobile.com/firmwares/3/?download=23362
Thank you.
Click to expand...
Click to collapse
To check bootloader install "Info" by Nag from Playstore and look in OS category.
Yes, but it will flash bootloader newer than MJ5 I think (MJ9 if my memory serves me right) and you may not be able to set KNOX to 0. Also you must play with TriangleAway before flashing stock 4.3 because it does not work on stock (root required).
Since you are in Europe, it should not matter too much (according to European law) so if someone makes any heat just say that it a law

mat9v said:
To check bootloader install "Info" by Nag from Playstore and look in OS category.
Yes, but it will flash bootloader newer than MJ5 I think (MJ9 if my memory serves me right) and you may not be able to set KNOX to 0. Also you must play with TriangleAway before flashing stock 4.3 because it does not work on stock (root required).
Since you are in Europe, it should not matter too much (according to European law) so if someone makes any heat just say that it a law
Click to expand...
Click to collapse
Amazing, alright now. Hope I can fix this usual problem...
Thanks for your complete and helpful answers!

mat9v said:
To check bootloader install "Info" by Nag from Playstore and look in OS category.
Yes, but it will flash bootloader newer than MJ5 I think (MJ9 if my memory serves me right) and you may not be able to set KNOX to 0. Also you must play with TriangleAway before flashing stock 4.3 because it does not work on stock (root required).
Since you are in Europe, it should not matter too much (according to European law) so if someone makes any heat just say that it a law
Click to expand...
Click to collapse
Hi again,
My bootloader (Info app) is:
Bootloader: N7100XXDLL7
I think this is the old (4.1.2) right?
Sent from my Nexus 5 using xda app-developers app

pep0te said:
Hi again,
My bootloader (Info app) is:
Bootloader: N7100XXDLL7
I think this is the old (4.1.2) right?
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
Yes, and it is probably the reason for Android Revolution problems. If I remember correctly it is a 4.3 rom and they have compatibility problems with older bootloaders - the results are random reboots and freezes (there is a lot about it in Phoenix rom thread). To comfortably use TW 4.3 rom it's best to update bootloader to MJ5. AOSP roms should not be affected though so I suppose that there was some other cause for this. You can flash 4.1.2 on this bootloader without issue, be mindful to safeguard data from your internal sdcard as you may loose them all.
I would advise testing standard 4.1.2 version and if everything works fine, flashing something new (with MJ5 bootloader for compatibility sake).

mat9v said:
Yes, and it is probably the reason for Android Revolution problems. If I remember correctly it is a 4.3 rom and they have compatibility problems with older bootloaders - the results are random reboots and freezes (there is a lot about it in Phoenix rom thread). To comfortably use TW 4.3 rom it's best to update bootloader to MJ5. AOSP roms should not be affected though so I suppose that there was some other cause for this. You can flash 4.1.2 on this bootloader without issue, be mindful to safeguard data from your internal sdcard as you may loose them all.
I would advise testing standard 4.1.2 version and if everything works fine, flashing something new (with MJ5 bootloader for compatibility sake).
Click to expand...
Click to collapse
Thanks. You suggest to flash 4.1.2 stock from sammobile right? I mean, it should install the same bootloader that I have now.
Thanks again!
Sent from my Nexus 5 using xda app-developers app

pep0te said:
Thanks. You suggest to flash 4.1.2 stock from sammobile right? I mean, it should install the same bootloader that I have now.
Thanks again!
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
Yes, exactly.

mat9v said:
Yes, exactly.
Click to expand...
Click to collapse
Okay, I will do it then. Thanks a lot! :fingers-crossed:

mat9v said:
Yes, exactly.
Click to expand...
Click to collapse
Hey mat9v,
I am trying to reset the counter but it still shows "1" (before this, it showed "7"). Do you know why can't get to fully reset it?
Thanks!

pep0te said:
Hey mat9v,
I am trying to reset the counter but it still shows "1" (before this, it showed "7"). Do you know why can't get to fully reset it?
Thanks!
Click to expand...
Click to collapse
To fully reset the counter it has to be done in certain order. I do not remember exactly in which order the sequence of events should proceed but it went something like this:
- run triangle away
- reboot
- enter download mode (odin version)
- flash stock rom
If you reboot even once to custom rom (this I'm certain) or even custom recovery (I think) the triangle away effect will be gone and the count returns to 1 because it detects custom rom/kernel.

MJ5 bootloader flash problems

Hi guys!
I hope that I chose the right forum to ask my question: I installed this rom onto my Note 2 LTE N7105, but now I don't have wifi (as the text in the rom description says). Before I flashed the rom, I had installed Devils Rom (deodexed and deknoxed 4.3 stock) with the devils kernel (based on MK5). I thought that the bootloader will be kept, because I already installed a wifi hotfix for that bootloader.
Now I have the new 4.4 rom installed, it works fine - except for wifi. If I got this right (if not, correct me) - flashing the MJ5 bootloader will solve the problem and I won't have KNOX triggered (now I have a "MA5" bootloader). So I tried to flash the MJ5 bootloader with ODIN 3.09 but it keeps failing. The drivers are installed, I can access the download menu. My pc recognizes the phone as COM5, but when I load the bootloader and click on flash, almost instantly a red FAIL appears in the first block. The output says "writing NAND..." and then "FAILED".
Now I am a bit confused - does the MJ5 bootloader work with the Note 2 LTE or only the non- LTE version? Are there any other ways to get wifi to work? If there's now way around, I am willing to trigger my knox.
Thanks in advance, I hope you can help a very confused user

Im having the same problems. odin is giving no love on updating the bootloader

Kenny_ken said:
Hi guys!
I hope that I chose the right forum to ask my question: I installed this rom onto my Note 2 LTE N7105, but now I don't have wifi (as the text in the rom description says). Before I flashed the rom, I had installed Devils Rom (deodexed and deknoxed 4.3 stock) with the devils kernel (based on MK5). I thought that the bootloader will be kept, because I already installed a wifi hotfix for that bootloader.
Now I have the new 4.4 rom installed, it works fine - except for wifi. If I got this right (if not, correct me) - flashing the MJ5 bootloader will solve the problem and I won't have KNOX triggered (now I have a "MA5" bootloader). So I tried to flash the MJ5 bootloader with ODIN 3.09 but it keeps failing. The drivers are installed, I can access the download menu. My pc recognizes the phone as COM5, but when I load the bootloader and click on flash, almost instantly a red FAIL appears in the first block. The output says "writing NAND..." and then "FAILED".
Now I am a bit confused - does the MJ5 bootloader work with the Note 2 LTE or only the non- LTE version? Are there any other ways to get wifi to work? If there's now way around, I am willing to trigger my knox.
Thanks in advance, I hope you can help a very confused user
Click to expand...
Click to collapse
Did you try to flash the kernel as stated in the installation instructions of the rom that your trying to install?

I have the agni kernel as it is the only way to get the wifi to work without the bootloader, which im trying to get too. For the life of me i cannot figure out why odin doesnt want to flash the bootloader. mj5 or nd3 makes no difference. according to info app my boot loader version is N7105ZHALJ4. Do I need to step up 'slower'?
I want to go to any of those recent bootloaders so wifi will work normally. It seems slow on the agni kernel but at least it works.

TeamFox said:
I have the agni kernel as it is the only way to get the wifi to work without the bootloader, which im trying to get too. For the life of me i cannot figure out why odin doesnt want to flash the bootloader. mj5 or nd3 makes no difference. according to info app my boot loader version is N7105ZHALJ4. Do I need to step up 'slower'?
I want to go to any of those recent bootloaders so wifi will work normally. It seems slow on the agni kernel but at least it works.
Click to expand...
Click to collapse
AFAIK you can't install Agni Kernel using Odin. Instead use your Custom Recovery to install that kernel, under "Install Zip from Storage" option of your custom recovery. HTH.

asin_punk said:
AFAIK you can't install Agni Kernel using Odin. Instead use your Custom Recovery to install that kernel, under "Install Zip from Storage" option of your custom recovery. HTH.
Click to expand...
Click to collapse
To clear things up i have already got agni kernel installed via recovery. I just cant update my bootloader via odin.

problem flashing mj5 bootloader and agni kernel too
i am on phoenix rom v18.8
cannot figure out if i am on mj5 bootloader
how to check my bootloader version?
secondly, i m trying to flash mj5 via odin but it says FAILED
Trying to flash agni kernel via odin and mobile odin,, it says success but when i check in my phone, nothing is done...
where am i going wrong?
pls help

anandsaurabh said:
i am on phoenix rom v18.8
cannot figure out if i am on mj5 bootloader
how to check my bootloader version?
secondly, i m trying to flash mj5 via odin but it says FAILED
Trying to flash agni kernel via odin and mobile odin,, it says success but when i check in my phone, nothing is done...
where am i going wrong?
pls help
Click to expand...
Click to collapse
Agni kernel is only flashable via recovery not with odin.. Its a zip file.. U can flash it using CWM or Philz Or twrp recoveries
Sent from my GT-N7100 using XDA Premium 4 mobile app

U r right hazin ... That file can be flashed only via recovery... But I m not able to flash it.. It goes into aroma installer, does its work and says done but does not show on settings... I e saved log file too of that process...

So no answer on this question yet?? I'm also trying to flash the MJ5 bootloader using Odin, no luck though.
Can anyone explain why it keeps failing?

did you fix the problem ?
apuntigam said:
So no answer on this question yet?? I'm also trying to flash the MJ5 bootloader using Odin, no luck though.
Can anyone explain why it keeps failing?
Click to expand...
Click to collapse
having the same thing now...

Davids said:
having the same thing now...
Click to expand...
Click to collapse
No, I never managed to fix it. I think I found out in the end that there never was an MJ5 bootloader for the GT-N7105 (the international LTE version). There was only an MJ5 bootloader for the non-LTE version, the GT-N7100. And of course, that phone's bootloader will never work on the N7105.
So we're out of luck it appears

so the phone is dead ?
apuntigam said:
No, I never managed to fix it. I think I found out in the end that there never was an MJ5 bootloader for the GT-N7105 (the international LTE version). There was only an MJ5 bootloader for the non-LTE version, the GT-N7100. And of course, that phone's bootloader will never work on the N7105.
So we're out of luck it appears
Click to expand...
Click to collapse
noting to do to bring back wifi&BT ?

Davids said:
noting to do to bring back wifi&BT ?
Click to expand...
Click to collapse
All of the new KitKat ROMs have fixes built in for that. Some of the Lollipop ROMs also fix this, so you don't really need that bootloader.

apuntigam said:
All of the new KitKat ROMs have fixes built in for that. Some of the Lollipop ROMs also fix this, so you don't really need that bootloader.
Click to expand...
Click to collapse
can you give me a link pls for somthing that works ?
i am Desperate a week with no wifi BT
THX

Davids said:
can you give me a link pls for somthing that works ?
i am Desperate a week with no wifi BT
THX
Click to expand...
Click to collapse
I'm on NamelessROM 5.0.2 at the moment, works fine for me. I'd probably recommend that one, battery life is also great. It's in the N7105 development forum. :good:
I was also on CM11 official, worked like a charm. There are a number of 4.4.4 ROMs in the N7105 development forum that were quite mature and worked well.

apuntigam said:
I'm on NamelessROM 5.0.2 at the moment, works fine for me. I'd probably recommend that one, battery life is also great. It's in the N7105 development forum. :good:
I was also on CM11 official, worked like a charm. There are a number of 4.4.4 ROMs in the N7105 development forum that were quite mature and worked well.
Click to expand...
Click to collapse
i have the 7100..
somthing for that device..

Davids said:
i have the 7100..
somthing for that device..
Click to expand...
Click to collapse
Ok, then it's a completely different discussion... not sure why the bootloader would be failing in that case, since it was built for that device. You could try a different Odin? (Assuming of course that your are NOT trying to DOWNGRADE the bootloader... it's well known that you can't downgrade the bootloarder to MJ5 from something more recent).
Otherwise, I'm sure there are equally useful ROMs for the N7100 in the Note 2 Original Development forum.
But, since your device is probably pretty old and almost certainly out of warranty by now, I would seriously consider flashing the latest official Samsung ROM to get the latest bootloader and then flash whatever you want on top of that. Voiding the warranty is irrelevant if you're already out of warranty. But, I have heard that even with the latest bootloader some people still have trouble with wifi and BT. In that case all I can suggest is playing around with different ROMs until you find something that works for you. As I'm not a N7100 user I can't really offer more advice than that, sorry man.

Guys where I can find a REAL WORKING link to download mj5 or higher bootloader??
I tried a lot & most of them are obselete

Maybe downnload the latest stock ROM from sammobile.com and extract the bootloader?
https://www.sammobile.com/firmwares/database/GT-N7105/

[Q] unlocking help

i have a samsung galaxy i747
that i have rooted running on 3.4.93 cyanogenmod
android version 4.4.3
i have recently received an unlock sim code i have been waiting on and every time i try to use it it will not work
and i am unable to access the secret menu any more i have tried to fix it to let me but it still wont so if anyone has any info on what i may be doing wrong or something for me to try that would be great thank u

You probably need to be running stock touchwiz.

DocHoliday77 said:
You probably need to be running stock touchwiz.
Click to expand...
Click to collapse
can u link me to a tut on how to install

imevilbob said:
can u link me to a tut on how to install
Click to expand...
Click to collapse
First you'll need to know which bootloaders you're on.
Get terminal emulator and type in:
Code:
su
getprop ro.bootloader
That will tell us which version you have to flash.
Stock firmwares can be found here or on sammobile.com

ok ok ok. i thought i was patient!
kudos,points,smilies, thanks and :beer:/:soda: to docholiday77 & BWolf56.
AND..... to ALL other helper-outers of us newbs!!
err on the side of kindness

BWolf56 said:
First you'll need to know which bootloaders you're on.
Get terminal emulator and type in:
Code:
su
getprop ro.bootloader
That will tell us which version you have to flash.
Stock firmwares can be found here or on sammobile.com
Click to expand...
Click to collapse
i have bricked my phone -.-

imevilbob said:
i have bricked my phone -.-
Click to expand...
Click to collapse
We're gonna need more info to help you.
Post everything you did.

BWolf56 said:
We're gonna need more info to help you.
Post everything you did.
Click to expand...
Click to collapse
i got a rom zip that was supposed to be the stock rom for my phone tried to install from the recovery mode then it seem like everything was going to work fine now the phone wont turn on

imevilbob said:
i got a rom zip that was supposed to be the stock rom for my phone tried to install from the recovery mode then it seem like everything was going to work fine now the phone wont turn on
Click to expand...
Click to collapse
Did you first check which bootloaders who had like I mentioned?
What version of "stock" did you flash?
Did you factory reset in recovery?

imevilbob said:
i got a rom zip that was supposed to be the stock rom for my phone tried to install from the recovery mode then it seem like everything was going to work fine now the phone wont turn on
Click to expand...
Click to collapse
Where did you get the ROM zip? Were you running a stock or custom recovery? What bootloader was on your phone? Are you sure the ROM was for your i747?

Similar issue, not bricked please advise
audit13 said:
Where did you get the ROM zip? Were you running a stock or custom recovery? What bootloader was on your phone? Are you sure the ROM was for your i747?
Click to expand...
Click to collapse
I have same basic question as OP. I am currently running CM 11 7/27 nightly. Bootloader is I747UCUEMJB. Custom Recovery is TWRP 2.7.0.0 I recently requested and received carrier unlock code from AT&T and have not been able to unlock. I am very happy with current state and would like to return as configured after change to enable unlock. After running TriangleAway, when booting into download, the following is listed:
ODIN MODE
PRODUCT NAME: SGH-I747
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: OFFICIAL
QUALCOMM SECURE BOOT: ENABLE
WARRANTY BIT: 1
BOOTLOADER RP SWREV: 2
Advice as to how to proceed would be greatly appreciated.

wash23 said:
I have same basic question as OP. I am currently running CM 11 7/27 nightly. Bootloader is I747UCUEMJB. Custom Recovery is TWRP 2.7.0.0 I recently requested and received carrier unlock code from AT&T and have not been able to unlock. I am very happy with current state and would like to return as configured after change to enable unlock. After running TriangleAway, when booting into download, the following is listed:
ODIN MODE
PRODUCT NAME: SGH-I747
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: OFFICIAL
QUALCOMM SECURE BOOT: ENABLE
WARRANTY BIT: 1
BOOTLOADER RP SWREV: 2
Advice as to how to proceed would be greatly appreciated.
Click to expand...
Click to collapse
This might help: http://forum.xda-developers.com/showthread.php?t=2722660

audit13 said:
This might help: http://forum.xda-developers.com/showthread.php?t=2722660
Click to expand...
Click to collapse
Thanks for your reply. I am currently exploring enewman17 guide to restoring. I will report with results.

wash23 said:
Thanks for your reply. I am currently exploring enewman17 guide to restoring. I will report with results.
Click to expand...
Click to collapse
Successfully restored to stock using guide at http://forum.xda-developers.com/showthread.php?t=2658486 by enewman17, Everything went smoothly except WiFi will not turn on.

[Q] need help urgently please :'(

i don't know how i did that stupid thing ! i'm using note 2 gt-n7100 ( rooted ) i tried to install a new rom that doesn't built for my phone with " mobile odin v 4.2 pro unfortunately it flashed the sumsung star dous stock rom on my mobile but it doesn't boot .. i entered the philz touch recovery menu and select clean to install a new rom and restore my old rom and the problems started to appear !
the first thing is when i press the power button to lock my note 2 and try to open it again i find no response at all and the only way is to remove the battery and re turn it on again and try not to press the lock button as if i do so my mobile gives me no response and the screen doesn't turn on !
the second matter i noticed that when the start up i found the bluetooth icon trying to turn to green like i'm turning the bluetooth on but a few seconds it didn't turn on even i try to turn it ! the bluetooth doesn't work at all !
the third thing when i recieve a call that turn on the proximty sensor automatically if i touch the sensor the screen go black but i lose the control and give me no response at all and i have to remove the battery and turn it on again !
the things i noticed when i flashed the galaxy star rom with mobile odin that it has partion called param and the note to doesn't have it with its rom but have partion called modem which i didn't found in the galaxy star rom !
i need help please how i delete things that caused that conflict .. i tried to reflash the stock rom of my note with odin on my lap top but nothig changed and it hanging and the screen freezes with no control at all and that happened when i try to use a custom rom and flash it through the recovery .. please help urgently
sorry for my bad english

Two options I see:
1. Try to restore your device using Kies3
2. Flash newest firmware (get it from sammobile) for your region using PC-Odin.

Putting "need help urgently please :'(" does not help you in any way, in fact it makes it more likely that people will simply ignore the topic. Topic titles need to be descriptive, not generic non-descriptive.
Your problem is that like many newbies you cant be bothered to do research, read and learn before messing around with your device.
You should boot into download mode and flash a stock rom. Preferably a older one that doesn't have knox. Then flash a stock rom(without knox) in recovery mode. All the info you need is here on forum.

Androidwizzard said:
Two options I see:
1. Try to restore your device using Kies3
2. Flash newest firmware (get it from sammobile) for your region using PC-Odin.
Click to expand...
Click to collapse
i forgot to tell that one of the things changed that my mobile lost the usb support in the normal mode as there is no change when i connect it to my pc except it charges only but it works in the download mode and when i reflash the stock rom v 4.3 the screen freezes after a few seconds of turning it on and i have to remove the battery .. do you think that flashing the 4.4.2 sthock rom will make a change ? as the solution of kies isn't possible due to the lack of usb support !
is there a way to format the sectors that the pation " param " which flashed by the sumsung star dous stock rom is in it and make that conflict to delete that ??

What was your last stock rom on your device before messing up?
I do absolutely not agree with those horror tales about knox, most people don't use and easily get rid of.
Do you remember your last bootloader? MK4 or above? Then don't take any risk by flashing 4.3 firmware and go straight ahead to 4.4.2.
It will be the safest way to get a working device again.

TheATHEiST said:
Putting "need help urgently please :'(" does not help you in any way, in fact it makes it more likely that people will simply ignore the topic. Topic titles need to be descriptive, not generic non-descriptive.
Your problem is that like many newbies you cant be bothered to do research, read and learn before messing around with your device.
You should boot into download mode and flash a stock rom. Preferably a older one that doesn't have knox. Then flash a stock rom(without knox) in recovery mode. All the info you need is here on forum.
Click to expand...
Click to collapse
i'm sorry for the way i show my problem as i'm a newbie already .. it that possible to downgrade my rom ? i will try install 4.1.2 rom then flasing the 4.4.2 one but when i flashed the 4.3 stock rom the screen freezes and nothing changed what do you think of that ? it there's a way to delete the " param " found in the sumsung galaxy star dous rom ? i think that made this conflict but try to explain to me why flashing an old rom then a new one without knox ? what will that do ?

Androidwizzard said:
What was your last stock rom on your device before messing up?
I do absolutely not agree with those horror tales about knox, most people don't use and easily get rid of.
Do you remember your last bootloader? MK4 or above? Then don't take any risk by flashing 4.3 firmware and go straight ahead to 4.4.2.
It will be the safest way to get a working device again.
Click to expand...
Click to collapse
i was using dn3 rom which has android version v 4.4.2 but i enter the recovery and restored the stock rom v 4.3 and it works with no problem and it was the last rom i use it when i flashed the star dous rom through the mobile odin in my mobile .. is there is a things i must do when i'm flashin the rom through the pc odin ? like check the repartion option or some thing else ?
my bootloader version is : n7100xxuena1 what that mean ?

omar youssef said:
i was using dn3 rom which has android version v 4.4.2 but i enter the recovery and restored the stock rom v 4.3 and it works with no problem and it was the last rom i use it when i flashed the star dous rom through the mobile odin in my mobile .. is there is a things i must do when i'm flashin the rom through the pc odin ? like check the repartion option or some thing else ?
my bootloader version is : n7100xxuena1 what that mean ?
Click to expand...
Click to collapse
So you can also try the NA1 firmware, but nothing beneath that. NA1 is a knox enabled BL, so whatever you flash successfully will have Knox in it.
DON'T TICK REPARTITION!

Androidwizzard said:
So you can also try the NA1 firmware, but nothing beneath that. NA1 is a knox enabled BL, so whatever you flash successfully will have Knox in it.
DON'T TICK REPARTITION!
Click to expand...
Click to collapse
what you mean of the NA1 firmware if you mean the 4.3 stock rom i flashed it with the pc odin and my mobile screen freezes as i told you and nothing changed .. give me obvious steps 1 2 3 to do it to solve this problem and if you can give me a suitable download links .. now you know all the issues with my mobile and thanks for your interst

omar youssef said:
what you mean of the NA1 firmware if you mean the 4.3 stock rom i flashed it with the pc odin and my mobile screen freezes as i told you and nothing changed .. give me obvious steps 1 2 3 to do it to solve this problem and if you can give me a suitable download links .. now you know all the issues with my mobile and thanks for your interst
Click to expand...
Click to collapse
1) Go to Sammobile
2) Find firmware for your region -> download
3) Find Odin 3.09 -> download and install
4) Start Odin 3.09
5) Plugin device -> see if Odin displays active com port
6) Go into download mode
7) Link firmware download in tab PDA/AP
8) Let Odin check md5
9) Press start button
10) Wait until display of com port in Odin turns green and says success.
All these steps could also be found with an easy Google search or in Youtube tutorials

Androidwizzard said:
1) Go to Sammobile
2) Find firmware for your region -> download
3) Find Odin 3.09 -> download and install
4) Start Odin 3.09
5) Plugin device -> see if Odin displays active com port
6) Go into download mode
7) Link firmware download in tab PDA/AP
8) Let Odin check md5
9) Press start button
10) Wait until display of com port in Odin turns green and says success.
All these steps could also be found with an easy Google search or in Youtube tutorials
Click to expand...
Click to collapse
Thanks for your work but I did all these steps but my mobile freezes and noying changed fir sorry .. I flashed the 4.4.2 kitkat stock rom which is the latest one !

omar youssef said:
Thanks for your work but I did all these steps but my mobile freezes and noying changed fir sorry .. I flashed the 4.4.2 kitkat stock rom which is the latest one !
Click to expand...
Click to collapse
OK, I see. Try a wipe from stock recovery, wipe all possible.
Another option: Kies!
I know, you said not recognized but you must get it to work. Uninstall all drivers from PC an re-install drivers until Kies can restore your device.
Very last option: Find a Samsung repair near to you.

Androidwizzard said:
OK, I see. Try a wipe from stock recovery, wipe all possible.
Another option: Kies!
I know, you said not recognized but you must get it to work. Uninstall all drivers from PC an re-install drivers until Kies can restore your device.
Very last option: Find a Samsung repair near to you.
Click to expand...
Click to collapse
Look I searched the internet find something I think it will be useful if we can use it successfully called n7100 rescue rom consists of 5 files in one zip file it is the fully original factory rom but unfortunately it's 4.1.2 jellybean so how can I flash this rom successfully ? Is it possible downgrade the bootloader first or what ?? Please help

omar youssef said:
Look I searched the internet find something I think it will be useful if we can use it successfully called n7100 rescue rom consists of 5 files in one zip file it is the fully original factory rom but unfortunately it's 4.1.2 jellybean so how can I flash this rom successfully ? Is it possible downgrade the bootloader first or what ?? Please help
Click to expand...
Click to collapse
As you mentioned you already have been on NA1 firmware and as it seems you have flashed latest 4.4.2 with "a kind of success" I find it hope- and useless to even try this rescue rom. Bootloader is the reason why you can't successfully flash. NO DOWNGRADE POSSIBLE.

Androidwizzard said:
As you mentioned you already have been on NA1 firmware and as it seems you have flashed latest 4.4.2 with "a kind of success" I find it hope- and useless to even try this rescue rom. Bootloader is the reason why you can't successfully flash. NO DOWNGRADE POSSIBLE.
Click to expand...
Click to collapse
Can you illustrate your words ? For kies it's unpossible to connect my mobile to any pc the drivers works perfectly for any similarphone the fault is in my mobile not the driver and for sumsung care it will be high cost as the warranty ended ! And I wipe every thing possible through the stock recovery but noyhing changed !

I am beginning to lose my patience cause you don't follow my advice or even don't consider that I am right.
Look into system on your PC if there is an unknown device.
Whenever hardware is connected to PC Windows starts to search for drivers.
It doesn't matter that other devices are recognized correctly.
Wipe all Samsung drivers and re-install. Even re-install Kies too.
Start Kies and try restoration, maybe it will fail, but try. AND with current drivers you are supposed to fail.
At last: Try to find a friend with knowledge who can help you at your home or his.

Update Stoped On Galaxy Note II Screen

Hello, I used to be rooted with custom ROMs ect but went back to stock I317ATTALJ2 so I can give the phone to my daughter. Well everything went smooth until an update from AT&T came through and she ran it when the battery was at 21% but I'm not sure it that matter but didn't help in matters... Anyhow it ran the upgrade and on reboot it stayed on the Galaxy Note II screen and wont do anything but sit there. I let it sit for a long time before pulling the battery and booting but it goes to same screen and same thing. I can not get into recovery (Volume Up, Home, Pwr) but I can go into download mode. With the battery being so low I read that it charges while in download mode so for the remainder of the day I put the phone in download mode and plugged into charger.
Suggestions?

After you get it charged up some and you're in download mode. Just Odin back to stock Att firmware should fix the problem hopefully...
You can find the stock firmware here>> http://bit.ly/1HNVFVJ
Guess the phone didn't like that update ?.

Bajanman said:
After you get it charged up some and you're in download mode. Just Odin back to stock Att firmware should fix the problem hopefully...
You can find the stock firmware here>> http://bit.ly/1HNVFVJ
Guess the phone didn't like that update .
Click to expand...
Click to collapse
Ok, Ill give the stock firmware (At&t Firmware I317UCALJ2 Uploaded By-Bajanman) that Bajanman supplys ill let you guys know in an hour or two its downloading now. I did try re installing the stock firmware I had that worked the first time and it was from SamMobile and it too sent me to the Galaxy Note II screen and froze so its not looking good.....
Thanks!

Oxicottin said:
Ok, Ill give the stock firmware (At&t Firmware I317UCALJ2 Uploaded By-Bajanman) that Bajanman supplys ill let you guys know in an hour or two its downloading now. I did try re installing the stock firmware I had that worked the first time and it was from SamMobile and it too sent me to the Galaxy Note II screen and froze so its not looking good.....
Thanks!
Click to expand...
Click to collapse
Ok.
Hopefully everything works out next time around.
Another thing you could try is flashing which ever recovery you previously had installed. Last time I was having issues with something similar, after re flashing my recovery everything started working again. Just just a thought that might work.
I'm monitoring this thread too see what happens ok.

Bajanman said:
Ok.
Hopefully everything works out next time around.
Another thing you could try is flashing which ever recovery you previously had installed. Last time I was having issues with something similar, after re flashing my recovery everything started working again. Just just a thought that might work.
I'm monitoring this thread too see what happens ok.
Click to expand...
Click to collapse
Recovery? can I flash the stock recovery using ODIN? If so where do I get it.... I always have used TWRP I wanted to use custom ROMs never really experimented with anything else.

Oxicottin said:
Recovery? can I flash the stock recovery using ODIN? If so where do I get it.... I always have used TWRP I wanted to use custom ROMs never really experimented with anything else.
Click to expand...
Click to collapse
Yes you can flash a custom recovery from Odin. You just have to use the (Twrp) tar file found here>>>
http://bit.ly/1y0Tyg7
Find your device model and download the tar. And make sure you're downloading the correct file for your device ok!
I to use Twrp and luv it.?

OK, well its not looking good....
1) Flashed the stock firmware suggested...... Still get same results!
2) Flashed TWRP through ODIN and it made it to the same screen and froze. Did a battery pull and button combo and it wont go into recovery.
Is there a application that will force your phone into recovery and download modes? I remember back when I messed with the captivate there was a application someone built that did such a thing.
Any suggestions?

Oxicottin said:
OK, well its not looking good....
1) Flashed the stock firmware suggested...... Still get same results!
2) Flashed TWRP through ODIN and it made it to the same screen and froze. Did a battery pull and button combo and it wont go into recovery.
Is there a application that will force your phone into recovery and download modes? I remember back when I messed with the captivate there was a application someone built that did such a thing.
Any suggestions?
Click to expand...
Click to collapse
Not sure you were on the newer 4.4.2 bootloader or not. If it was on a newer bootloader then you won't be able to downgrade.. This might help you get the phone working again since you just flashed the original firmware.
Go to this thread here>>http://forum.xda-developers.com/showthread.php?t=2502464.
Download
4.3 Param.bin and Tz.img
http://d-h.st/OYC
Step 2 (no bootloader in here)
flash this to bring wifi back
but keep your knox free 4.1.2 bootloader.
Allowing you to freely flash between 4.1.2 roms and the latest 4.3 leak
Without having to one click,Keeping Wifi Throughout and removing Knox
Click to expand...
Click to collapse
Unzip, Boot into Download mode, Open ODIN, put tar file in PDS slot, click Start.
Then you can go here for the latest stock Att firmware. If the above steps don't help you, then you could try flashing one one the rooted stock packages from this thread.

Bajanman said:
Not sure you were on the newer 4.4.2 bootloader or not. If it was on a newer bootloader then you won't be able to downgrade.. This might help you get the phone working again since you just flashed the original firmware.
Go to this thread here>>http://forum.xda-developers.com/showthread.php?t=2502464.
Download
4.3 Param.bin and Tz.img
http://d-h.st/OYC
Unzip, Boot into Download mode, Open ODIN, put tar file in PDS slot, click Start.
Then you can go here for the latest stock Att firmware. If the above steps don't help you, then you could try flashing one one the rooted stock packages from this thread.
Click to expand...
Click to collapse
Ok that worked and it booted!!!! Now im on 4.1.1 with TWRP
Not really sure what I just did? Did I downgrade my bootloader? Also, now how do I get it to the most up to date version without this again?
I downloaded an app and it says im on.....
Bootloader Version: 1317UCUBMK6
Thanks!

Oxicottin said:
Ok that worked and it booted!!!! Now im on 4.1.1 with TWRP
Not really sure what I just did? Did I downgrade my bootloader? Also, now how do I get it to the most up to date version without this again?
Thanks!
Click to expand...
Click to collapse
Ok not is back working again, which is great news ?. Go to the link I posted for the stock firmware, and use the rooted one.
But first make a backup of your working system first ok.

Bajanman said:
Ok not is back working again, which is great news . Go to the link I posted for the stock firmware, and use the rooted one.
But first make a backup of your working system first ok.
Click to expand...
Click to collapse
Ok, Im On 4.3 now and its working great.... Thank You!

Oxicottin said:
Ok, Im On 4.3 now and its working great.... Thank You!
Click to expand...
Click to collapse
You're very welcome glad I could help fix it.
Have a good day...

Ok problem solved so unsubscribing from this thread. If you run into any other problems you can always hit me up thru pm ?.